Though, in many respects, you could trace its DNA back to the DOD 250 and MXR Distortion+, the Fulltone OCD hit a sweet spot and felt pretty fresh to a lot of players when it was new. It had the edginess and attitude of those hard-clipping drive/distortion pioneers. But it could also sound more open and natural than some of its fellow hard-clipping circuits when tuned just right. Warm Audio’s ODD Box V1, which, as any genius can guess, is an OCD clone at almost every turn, shares those attributes at a very nice $119 price, which is extra attractive given its through-hole construction and the attention that went into its execution.
Sensitive, But Comes on Strong
I came to know the Fulltone OCD via the pedalboard of a studio mate, whose rig was geared toward heavy psychedelic sounds. He used it at a relatively low gain setting and situated it downstream from a germanium Fuzz Face. I tended to experiment with the pedal in that context, and I was always impressed with how it felt aggressive but controlled and not too bossy. Pairing it with the Fuzz Face made for a pretty dangerous combination, too. The ODD Box V1 is capable of all these tricks—though it often feels a bit bossier than the OCD that lives in my memory.
If you had to classify the ODD Box V1’s essence, “Marshall-y” would be a good place to start. It feels immediate, explosive at times, and brimming with scalding top end if you want it. That tendency toward toppiness can make the ODD Box V1 a tricky fit with some amps. Even at low gain and conservative tone settings, the ODD was a poor fit for a black-panel Vibrolux with a lively treble signature. But a squishier black-panel Tremolux coaxed a thicker, richer tone picture, and a darker silver-panel Bassman (which, to my ears, sounds and behaves much like a mid-scooped Marshall plexi) felt like a near ideal fit.In these more optimal pairings, the ODD Box V1 can shine, particularly in low-to-mid-gain settings. It can coax the midrange hiding in the corners of darker amps, making chords sound thick and vividly detailed. It also lends size to lead tones without sounding fuzzy or obscuring an instrument’s voice. Bridge PAFs growl beautifully in this low-gain zone, and Stratocaster neck pickups take on a tasty edge and satisfying mass. At higher gain settings, the ODD Box V1 fast veers toward tones that, to my surprise, seemed like a good match for thrash and British metal. It’s surprisingly aggressive, and if you’re not careful, treble tones can get a bit sizzly. I had to work the tone controls on my guitar, my amps, and the pedal pretty actively to get it in the right pocket. It’s easy to hear how lightning-fast leads would benefit from these pronounced treble tones. But if you like a more forgiving, compressed touch at these high gain levels, the ODD might feel a bit hot.
“It can coax the midrange hiding in the corners of darker amps, making chords sound thick and vividly detailed.”
Though the ODD has a strong personality, its touch sensitivity and responsiveness to varied guitar volume and tone input extends its flexibility and marks another difference between it and pedals with a similar voice, like the Boss SD-1 (which often sounds like a boxier, less complex cousin to the ODD Box V1). It’s pretty easy to summon full-sounding, near-clean tones with a little less guitar volume, and much of that sizzling top end can be rounded off with a quick flick of an instrument’s tone knob.
The Verdict
I love that Warm Audio chases analog authenticity at fair prices. But considering how many rarities and out-of-reach vintage pieces they’ve cloned, it’s a little curious that they chose to replicate a pedal as ubiquitous as the OCD—even in light of Fulltone’s disappearance. The ODD Box V1’s core tonalities tend toward hot, reactive, and distinctly on the Marshall side of the drive spectrum. If that’s a realm where you like to dwell, it’s an affordable alternative to pricier amp-in-a-box solutions like the ZVEX Box of Rock, and more dynamic, open, and natural sounding than an SD-1 and its cousins. For all its Marshall-ness, though, with the right amp—usually one on the darker side—you can summon some of the personality of an angry Fender tweed or an old Supro running hot and wide open. It looks and feels like it’s built for the long haul, inside and out. And if you’re a fan of spot-on aesthetic accuracy, Warm Audio nailed just about every facet of the OCD’s look and feel. For players whose style aligns with its bold personality, it’s a great value.
Warm Audio ODD and Mutation Phasor Demos | PG Plays
- DIY Pedalboard Build ›
- DIY: How to Repair a Wet Pedal ›
- Confessions of a Pedal Nerd ›
- Warm Audio RingerBringer and Warm Bender Demo ›
- Warm Audio RingerBringer - A Comprehensive Review ›
- Warm Audio Pedal76 & WA-C1 Pedal Demos with Tom Butwin - Premier Guitar ›
- Warm Audio Pedal76 Compressor Review - Premier Guitar ›
- Warm Audio WA-C1 Pedal Demo/Review - Premier Guitar ›
The Mick Ronson Cry Baby Wah taps into the vibrant, melodic character of one of rock ’n’ roll’s most gifted songwriters. Few guitar players have been able to combine a keen musical instinct with a profound grasp of how to bring a composition together like Mick Ronson. Laden with expressive resonance, his arrangements layered deliberately chosen tones and textures to build exquisite melodies and powerful riffs. The Cry Baby Wah, set in a fixed position to serve as a filter, was key to the tone-shaping vision that Ronson used to transform the face of popular music through his work with David Bowie and many others as both an artist and a producer.
We wanted to make that incredible Cry Baby Wah sound available to all players, and legendary producer Bob Rock—a friend and collaborator of Ronson’s—was there to help. He generously loaned us Ronson’s own Cry Baby Wah pedal, an early Italian-made model whose vintage components imbue it with a truly singular sound. Ronson recorded many tracks with this pedal, and Rock would go on to use it when recording numerous other artists. With matched specs, tightened tolerances, and a custom inductor, our engineers have recreated this truly special sound.
“You place the wah, and leave it there, and that's the tone,” Rock says. “It's all over every record he ever made, and I’ve used it on every record since I got it. Dunlop’s engineers spent the time and sent me the prototypes, and we nailed that sound.”
Mick Ronson Cry Baby Wah highlights:
- Tailor-made for Ronson’s signature fixed-wah tones• Carefully spec’d from his own wah pedal
- Custom inductor replicates higher frequency response and subtler peak
- Fast initial sweep with Instant reactivity
- Distinctive EQ curve from period-accurate components
- Special finish inspired by Ronson’s monumental work
The Mick Ronson Cry Baby Wah is available now at $249.99 street from your favorite retailer.
For more information, please visit jimdunlop.com.
The concert will be hosted by WWE Superstar Damian Priest, a well-known “metalhead” and a long-time Slayer fan. Priest's signature “finisher” is Slayer’s “South of Heaven,”and Slayer’s Kerry King provided guitar for Priest’s “Rise For The Night” Theme.
This exclusive concert brings together a multi-generation, powerhouse line up:
Slayer
Knocked Loose
Suicidal Tendencies
Power Trip
Cavalera (performing Chaos A.D. - exclusive)
Exodus (performing Bonded by Blood)
All confirmed Slayer 2025 concert dates are as follows:
JULY
3 Blackweir Fields, Cardiff, Wales, UK
Line-Up: Slayer, with Special Guests Amon Amarth , Anthrax, Mastodon, Hatebreed and Neckbreakker
5 Villa Park, Birmingham, UK • Black Sabbath • Back to the Beginning
6 Finsbury Park, London
Line Up: Slayer, with Special Guests Amon Amarth , Anthrax, Mastodon, Anthrax, and Neckbreakker
11 Quebec Festival d'été de Québec City, Quebec
Direct Support: Mastodon
SEPTEMBER
18 Louder Than Life @ Highland Festival Grounds, Louisville, KY
20 Hersheypark Stadium, Hershey, PA
Over the decades with Hüsker Dü, Sugar, and solo, Bob Mould has earned a reputation for visceral performances.
Mould’s album landed in a world of cloistered listeners, so he never knew how it impacted people. For a musician from punk and hardcore scenes, it was a disquieting experience. So when he got back out on the road in 2023 and 2024, playing solo electric sets, the former Hüsker Dü and Sugar frontman was determined to reconnect with his listeners. After each show, he’d hang out at the merch table and talk. Some people wanted their records or shirts signed, some wanted a picture. Others shared dark stories and secret experiences connected to Mould’s work. It humbled and moved him. “I’m grateful for all of it,” he says.
These are the in-person viscera of a group of people connecting on shared interests, versus, says Mould, “‘I gotta clean the house today, so I’m going to put on my clean the house playlist that a computer designed for me.” “Everything has become so digitized,” he laments. “I grew up where music was religion, it was life, it was essential. When people come to shows, and there’s an atmosphere, there’s volume, there’s spilled drinks and sweat–that’s what music ritual is supposed to be.”
His experiences on tour after the pandemic heartened Mould, but they also gave him traction on new ideas and direction for a new record. He returned to the simple, dirty guitar-pop music that spiked his heart rate when he was young: the Ramones’ stupid-simple pop-punk ecstasy, New York Dolls’ sharp-edged playfulness, Pete Townshend’s epic, chest-rattling guitar theatrics. In other words, the sort of snotty, poppy, wide-open rock we heard and loved on Hüsker Dü’s Flip Your Wig and Candy Apple Grey.
Mould’s time on the road playing solo in 2023 sparked the idea for Here We Go Crazy.
Photo by Ryan Bakerink
Mould started writing new songs in the vein of his original childhood heroes, working them into those electric solo sets in 2023 and 2024. Working with those restraints—guitar chords and vocal melodies—put Mould on track to make Here We Go Crazy, his new, 15th solo record.
Lead single and opener “Here We Go Crazy” is a scene-setting piece of fuzzy ’90s alt-rock, bookended by the fierce pounding of “Neanderthal.” “When Your Heart is Broken” is a standout, with its bubblegum chorus melody and rumbling, tense, Who-style holding pattern before one of the album’s only solos. Ditto “Sharp Little Pieces,” with perhaps the record’s chewiest, darkest guitar sounds.
“It’s a very familiar-sounding record,” he continues. “I think when people hear it, they will go, ‘Oh my god, this is so Bob Mould,’ and a lot of that was [influenced by] spending time with the audience again, putting new stuff into the set alongside the songbook material, going out to the table after the show and getting reactions from people. That sort of steered me towards a very simple, energetic, guitar-driven pop record.”
Of his new album, Mould says, “I think when people hear it, they will go, ‘Oh my god, this is so Bob Mould.’”
Mould recorded the LP in Chicago with longtime bandmates Jason Narducy and Jon Wurster at the late, great Steve Albini’s Electrical Audio. Then Mould retreated to San Francisco to finish the record, chipping away at vocals and extra guitar pieces. He mostly resisted the pull of “non-guitar ornamentation”: “It’s a rhythm guitar record with a couple leads and a Minimoog,” he says. “It’s sort of cool to not have a 64-crayon set every time.”
Mould relied on his favorite, now-signature late-’80s Fender Strat Plus, which sat out on a runway at O’Hare in 20-below cold for three hours and needed a few days to get back in fighting shape. In the studio, he ran the Strat into his signature Tym Guitars Sky Patch, a take on the MXR Distortion+, then onto a Radial JD7. The Radial split his signal and sent it to three combo amps: a Fender Hot Rod DeVille, a Fender ’68 Custom Deluxe Reverb reissue, and a Blackstar Artisan 30, each with a mic on it. The result is a brighter record that Mould says leaves more room for the bass and kick drum. “If you listen to this record against Patch the Sky, for instance, it’s night and day,” he says. “It’s snug.”
Mould explains that the record unfolds over three acts. Tracks one through five comprise the first episode, crackling with uncertainty and conflict. The second, spread over songs six to eight, contrasts feelings of openness with tight, claustrophobic tension. Here, there are dead ends, addictions, and frigid realities. But after “Sharp Little Pieces,” the album turns its corner, barreling toward the home stretch in a fury of optimism and determination. “These last three [songs] should give us more hope,” says Mould. “They should talk about unconditional love.”
The record closes on the ballad “Your Side,” which starts gentle and ends in a rush of smashed chords and cymbals, undoubtedly one of the most invigorating segments. “The world is going down in flames, I wanna be by your side/We can find a quiet place, it doesn’t need to be the Albert Hall,” Mould starts. It’s a beautiful portrait of love, aging, and the passage of time.
Bob Mould's Gear
Mould paired his trusty Fender Strat Plus with a trio of smaller combo amps to carve out a more mid-focused rhythm-guitar sound in the studio.
Photo by Mike White
Guitars
- Late 1980s Fender American Standard Strat Plus (multiple)
Amps
- Fender Hot Rod DeVille
- Blackstar Artisan Series amps
- Fender '68 Custom Deluxe Reverb
Effects
- Tym Guitars Sky Patch
- TC Electronic Flashback
- Electro-Harmonix Freeze
- Wampler Ego
- Universal Audio 1176
- Radial JD7
Strings, Picks, & Power Supply
- D'Addario NYXLs (.011-.046)
- Dunlop .46 mm and .60 mm picks
- Voodoo Labs power supply
And though the record ends on this palette of tenderness and connection, the cycle is likely to start all over again. Mould understands this; even though he knows he’s basking in act three at the moment, acts one and two will come along again, and again. Thankfully, he’s figured out how to weather the changes.
“When things are good, enjoy them,” he says. “When things are tough, do the work and get out of it, somehow.”
- YouTube
Many of the tracks on Here We Go Crazy were road-tested by Mould during solo sets. Here, accompanied only by his trusty Fender Strat, he belts “Breathing Room.”
Reader: Federico Novelli
Hometown: Genoa, Italy
Guitar: The Italian Hybrid
Reader Federico Novelli constructed this hybrid guitar from three layers of pine, courtesy of some old shelves he had laying around.
A few years ago, at the beginning of Covid, an idea for a new guitar flashed through my mind. It was a semi-acoustic model with both magnetic and piezo pickups that were mounted on a soundboard that could resonate. It was a nice idea, but I also had to think about how to make it in my tiny cellar without many power tools and using old solid-wood shelves I had available.
I have been playing guitar for 50 years, and I also dabble in luthiery for fun. I have owned a classical guitar, an acoustic guitar, and a Stratocaster, but a jazz guitar was missing from the list. I wanted something that would have more versatility, so the idea of a hybrid semi-acoustic guitar was born.
I started to sketch something on computer-aided design (CAD) software, thinking of a hollowbody design without a center block or sides that needed to be hot-worked with a bending machine. I thought of a construction made of three layers of solid pine wood, individually worked and then glued together in layers, with a single-cutaway body and a glued-in neck.
For the soundboard and back, I used a piece of ash and hand-cut it with a Japanese saw to the proper thickness, so I had two sheets to fit together. Next, I sanded the soundboard and bottom using two striker profiles as sleds and an aluminum box covered in sandpaper to achieve a uniform 3 mm thickness. A huge amount of work, but it didn't cost anything.
“It was a nice idea, but I also had to think about how to make it in my tiny cellar without many electric tools and out of old solid-wood shelves I had available.”
The soundboard has simplified X-bracing, a soundhole with a rosewood edge profile, and an acoustic-style rosewood bridge. For the neck, I used a piece of old furniture with straight grain, shaped it to a Les Paul profile, and added a single-action truss rod. The only new purchase: a cheap Chinese rosewood fretboard.
Then, there was lots of sanding. I worked up to 400-grit, added filler, primer, and transparent nitro varnish, worked the sandpaper up to 1,500-grit, and finally polished.
Our reader and his “Italian job.”
For electronics, I used a Tonerider alnico 2 humbucker pickup and a piezo undersaddle pickup, combined with a modified Shadow preamp that also includes a magnetic pickup input, so you can mix the two sources on a single output. I also installed a bypass switch for power on/off and a direct passive output.
I have to say that I am proud and moderately satisfied both aesthetically and with the sounds it produces, which range from jazz to acoustic and even gypsy jazz. However, I think I will replace the electronics and piezo with Fishman hardware in the future.
