A triangle-style Muff homage dishes white-hot sounds alongside unexpected fuzz shapes and colors.
Screaming classic Muff tones and fuzz surprises throughout the gain range. Thoughtful, imaginative build. Looks awesome.
Fans of smooth, Sovtek-style maximum saturation might find max-gain settings relatively harsh.
$309
Wren and Cuff The Good One
wrenandcuff.com
A vintage circuit detective’s life isn’t exactly that of a Benedictine monk. But to decode what makes vintage Big Muffs tick, you inevitably give away many hours of your life. For Matt Holl’s part in this sacrifice, players can reliably experience choice and unique vintage Muff tones in the form of his well-built and often vintage-handsome Wren and Cuff pedals. Holl fully embraces the idiosyncrasies in Big Muffs, and the potential of those quirks. His Forest Through The Trees (formerly known as the De La Riva), for example, employs 20 DIP switches for moving between gain transistors, clipping diodes, biasing, and just about every other component in the circuit. The Garbage Face, meanwhile, creatively replicates the drifting and very irregular component values in J Mascis’ original Ram’s Head Muff. Each pedal reflects Holl’s understanding that old Big Muffs are individuals, and that the key to a pedal’s appeal can lurk in unexpected places.
Holl's newest Big Muff-inspired pedal, The Good One, is the product of another deep dive in the haystack of variables that make up a vintage Muff. And though many tone differences will be discernible primarily to experienced Muff players, it's still certain to be a thrill ride for the uninitiated or anyone that has muddled along with a mediocre take on the circuit.
The Good One’s controls yield copious variations on its basic voice—particularly when you take an open-minded approach to using the tone and sustain knobs.
A Three-Pointed Superstar
For those less well versed in Big Muff history and lore, The Good One is based on a “triangle” Big Muff circuit. Triangle Muffs represent the pedal’s very first generation. And in the estimates of some experts, they are the most varied Muffs of all—which is saying a lot. In 2020 Holl received a very old Triangle for restoration. And because the pedal wasn’t working at all, he had an especially close look at the whole circuit. What he found was an unexpected amalgam of unusual component values and inexpensive ceramic disk capacitors (which are more likely to be microphonic than their metal film counterparts). What he heard, though, was uniquely awesome—even to his very Muff-attuned ears
Approximating those sounds—and the component values that made them—meant that Holl used a mix of new components (metal film resistors) and old ones (NOS versions of those nasty old ceramic disk caps). Holl self-deprecatingly calls the resulting circuit “grungy” looking. And there is definitely a Radio Shack electronic project charm about the layout—at least until you realize how immaculately it’s put together.
Right to the Point
Though the audible differences between vintage Big Muffs can be vast within a given production run—never mind among completely different versions—Triangle Muffs have a reputation for articulation and clarity, at least by Big Muff standards. Those attributes definitely make up part of The Good One’s personality, but they are far from the only distinguishing characteristics. Unlike a lot of Big Muffs, The Good One’s controls yield copious variations on its basic voice—particularly when you take an open-minded approach to using the tone and sustain knobs. In various combinations, the two controls can make The Good One’s voice sound snorkely and filtered like a wah, tight, compressed, and buzzing like a primitive mid-1960s fuzz, or scorchingly blown out. Compared to a few favorite Big Muff clones, The Good One’s sustain control has a noticeably greater range of color. That also makes it a much more flexible pairing for an overdrive or boost. It also generates very cool fuzz sounds when paired with low-wattage amps and small speakers. And it’s exciting to consider the ways The Good One would excel at creating non-canonical Big Muff sounds in the studio.
The Good One isn’t lacking for those either, however. At the hottest sustain and trebliest tone control positions—and when used at the volume and brutish musical context many would consider most apropos for a Big Muff—The Good One still takes on a whitewashed, compressed, and gauzy tone that rips, but obscures some of The Good One’s most complex high-gain tones. Back the sustain off just a notch, though, strip back some treble, and The Good One growls with much more focus and just as much mass. Solo tones still sing at these slightly south-of-maximum-gain settings as well. So, you need not fear for lack of sustain. Sovtek-style Big Muff users may miss some of the smoother overtones you hear from those pedals at high-gain settings. But The Good One offers much sharper transients in trade—a factor that makes The Good One shine among lesser Muff-style fuzzes.
The Verdict
It’s peculiar to say, perhaps, given its very specific origins, but The Good One is the kind of Muff-style fuzz that Muff skeptics and newbies can embrace. Big Muff devotees and traditionalists can fairly expect to fall in love, too. But the extra range in its voice make it comparatively flexible. And if the music you make transcends skull-bludgeoning classic Muff sounds, you’ll find many cool fuzz textures here to utilize and experiment with.
Wren and Cuff The Good one
- Ships within 5 days
- Vintage ceramic disc caps in signal path
- Period correct carbon composition resistors
- Heavy duty folded steel enclosure
- True hardwire bypass
- Made in the USA
It’s Day 26 of Stompboxtober! Today’s pedal from MXR could be yours—enter now and return tomorrow for more!
MXR M309 Joshua Ambient Echo Pedal
The MXR Joshua Ambient Echo is your ticket to iconic sonic sanctuaries, featuring a foundation of carefully concocted tones and textures, highly customizable delay, and other features to help you craft soundscapes worthy of tonal trips out of the ’60s and ’70s and ethereal ambience from the ’80s.
This pedal requires 9 volts (300mA) and can be powered by the Dunlop ECB003 9-volt adapter or the MXR Iso-Brick Pro, Iso-Brick, and Mini Iso-Brick power supplies. This pedal cannot be powered by a battery.
Vintage-style reverb, tremolo, and vibrato sounds abound in a 3-in-1 stomp that might be the only box you need.
The Keeley ZOMA combines two of iconic amp effects—tremolo and reverb—into one pedal.
Key Features of the ZOMA
● Intuitive Control Layout: Three large knobs give you full control over Reverb Level, Tremolo Rate,and Depth
● Easy Access to Alternate Controls: Adjust Reverb Decay, Reverb Tone, and Tremolo Volume withsimple alt-controls.
● Instant Effect Order Switching: Customize your signal path. Position tremolos after reverb for avintage, black-panel tone or place harmonic tremolo before reverb for a dirty, swampy sound.
● True Bypass or Buffered Trails: Choose the setting that best suits your rig.
Three Reverb and Tremolo Modes:
● SS – Spring Reverb & Sine Tremolo: Classic spring reverb paired with a sine wave tremolo for that timelessblack-panel amp tone.
● PH – Plate Reverb & Harmonic Tremolo: Smooth, bright plate reverb combined with swampy harmonictremolo.
● PV – Plate Reverb & Pitch Vibrato: Achieve a vocal-like vibrato with ethereal plate reverb.
Reverb: Sounds & Controls
● Spring Reverb: Authentic tube amp spring reverb that captures every detail of vintage sound.
● Plate Reverb: Bright and smooth, recreating the lush tones of vibrating metal plates.
● Reverb Decay: Adjust the decay time using the REVERB/ALT SWITCH while turning the Level knob.
● Reverb Tone: Modify the tone of your reverb using the REVERB/ALT SWITCH while turning the Rate knob.
Tremolo: Sounds & Controls
● Sine Wave/Volume Tremolo: Adjusts the volume of the signal up and down with smooth sine wavemodulation.
● Harmonic Tremolo: Replicates classic tube-amp harmonic tremolo, creating a phaser-like effect withphase-split filtering.
● Pitch Vibrato: Delivers pitch bending effects that let you control how far and how fast notes shift.
● Alt-Control Tremolo Boost Volume: Adjust the boost volume by holding the REVERB/ALT footswitch whileturning the Depth knob.
The ZOMA is built with artfully designed circuitry and housed in a proprietary angled aluminum enclosure, ensuring both simplicity and durability. Like all Keeley pedals, it’s proudly designed and manufactured in the USA.
ZOMA Stereo Reverb and Tremolo
The first sound effects built into amplifiers were tremolo and reverb. Keeley’s legendary reverbs are paired with their sultry, vocal-like tremolos to give you an unreal sonic experience.
By now, we’re all familiar with the many options out there for amp modeling. Mic modelers are another reliable asset to digital recording tech, and can rapidly grow your inventory with just a few clicks.
As guitarists, we’re very aware of amp-modeling and profiling technologies, such as the Line 6 Helix, Fractal Axe-Fx, Neural DSP Quad Cortex, and Kemper Profiler. While our bases are covered for these (with modelers available for every “holy grail” amp under the sun), we are still missing another vital area of the recording process—microphones—for the acoustic instruments and vocals we might want to capture.
What if we could record them using holy-grail-modeled microphones? This month, let’s evaluate microphone modeling to help you make better-sounding recordings. Tighten up, the Dojo is now open.
The Sincerest Form of Flattery
Microphone modeling is an intriguing advancement in recording technology, offering great flexibility and possibilities for musicians, producers, and engineers. Makers like Slate Digital, Antelope, and Antares make many offerings, from hardware to software.
Universal Audio’s Sphere DLX ($1299 Street), LX ($799), and their six new Standard Mic series have impeccably modeled classic mics, and when coupled with their classic mic pre and compressor plugins, you can enjoy the same highly coveted mic chains appreciated the world over.
How It Works
The technology behind microphone-modeling systems relies heavily on convolution and impulse response techniques. These techniques involve capturing the unique sonic fingerprint of a microphone by recording its response to a wide range of frequencies and sound pressure levels. The immediate benefit is that this means you can grow your mic locker exponentially and gain access to a wide range of legendary microphone tones and textures all from a single mic! Most modeling microphones are usually either small- or large-diaphragm, multi-pattern, condenser microphones that are capable of capturing a wide frequency range and dynamic response. By adding other modeling mics, you can record in stereo or surround, and/or record multiple instruments at a fraction of the cost of owning multiples of the modeled mics themselves.
A Wealth of Options
One significant advantage of mic-modeling systems is their ability to offer a vast array of microphone options within a single session instead of having the time-consuming duty of swapping them out to achieve different sounds. With a modeling system, you can switch between different mic models instantly and audition various mics to find the perfect tone for the recording.
“The same vintage microphone can sound different on different days depending on temperature, humidity, and the voltage from the wall.”
Another lovely bonus is that microphone-modeling systems also offer the ability to swap microphone characteristics after the recording has been made! Want to swap your AKG C12 for a Neumann U 47 long after the recording session is over? No problem! This is especially useful when the initial microphone choice may not have been ideal or when the production requires a different tonal character than originally intended.
Weighing the Pros and Cons
Some audio purists argue digital emulation can’t truly replicate the sound of a physical microphone, especially when it comes to vintage models that have unique characteristics developed over decades of use. The subtleties of these microphones and their aging components shape the way they interact with different preamps and compressors.
After making over a hundred records at Blackbird over the last eight years, I’ve grown quite familiar with a good portion of our 1,800-plus vintage mics, like Telefunken 251s, AKG C12s, Neumann U 47s and KM 84s, Shure SM7s and SM57s, RCA 44s and 77s, and Royer R-121s. These are the very same mic models that most modeling mics are trying to capture. But experience has taught me that not all microphones sound identical even if they are the same make and model (and year). Also, the same vintage microphone can sound different on different days depending on temperature, humidity, and the voltage from the wall (that’s why Blackbird has its own regulated power and all the studios strive for consistent temperature and humidity year-round).
For home studios and smaller production environments, microphone-modeling systems can be a game changer. You’ll get a wide range of high-end microphone sounds without the need for a large microphone collection, and the ability to change microphone models after the fact gives budding producers and engineers greater confidence and flexibility in their work.
In reality, most users find that the convenience, cost savings, and versatility offered by modeling systems far outweigh any potential shortcomings. Finally, keep in mind that even though the mic “profile” you choose (U 47, U 67, SM7, etc.) will be consistent day in and day out, the modeling mic itself is also still a mic and will require you to be mindful of these same issues I mentioned above in order for your mic “profile” to be as accurate as possible.
Until next time, namaste.