
No need to fall back on those stock, tired blues licks.
Intermediate
Beginner
- Understand the basics of the blues scale.
- Create angular lines by taking an intervallic approach.
- Toss out all those B.B., Freddie, and Albert licks.
We all get burned out playing the same scales, the same way, over and over. A common solution to that guitar-driven angst is to search out other scales, hoping to find a new muse. While learning new scales is an important part of your development as a player, you can often overlook some structures within a scale that you already know.
The blues scale is usually one of the first scales a guitarist learns and is arguably used in almost every genre of guitar playing. Just for review, look at Ex. 1, which lays out the notes of the A blues scale (A–C–D–Eb–E–G). If you've already worked on the blues scale, ask yourself if you can identify each scale tone on every string. That knowledge is important! You'll have a deeper understanding of what you're playing, and it will keep you away from the "this-looks-like-it-sounds-cool" approach.
The most common fingering for the A blues scale is found in 5th position, and the second most common pattern is in 12th position. Ex. 2 shows all positions of the A blues scale. Base your fingerings to these patterns on the minor pentatonic modes but notice that adding the blue note creates some new shifting that you'll have to keep an eye on.
So, now you know the scale and you know how to play it everywhere on the neck. But here's the thing: Think of the scale as a six-note (hexatonic) scale rather than simply a minor pentatonic with an added note. Doing so will enable you to conceive of new and different things to play. One common way to reorganize the notes in a hexatonic scale is to pair the notes in thirds, or every other note. Look at Ex. 3 where these pairs are mapped out in 5th position and shows the intervals they create.
If you did this with a minor pentatonic, you would get four perfect fourths (P4) and one major third (M3) for a total of five intervals. With the blues scale, you get a perfect fourth, minor third (m3), major second (M2), major third, and then two perfect fourths for a grand total of six intervals. The b5 in the middle of the scale is the reason for the variety and squirrelly nature of the results and gives you different tools to add a new dimension to your blues playing.
To get these under your fingers and give you something to play, listen to Ex. 4 where these pairs are played ascending through the scale pattern in fifth position.
Ex. 4
Naturally, anytime you work on a sequential pattern it's helpful to twist those around into different permutations. In Ex. 5 I descend each interval pair while ascending the scale.
Ex. 5
Let's mix it up! In Ex. 6 and Ex. 7 I alternate through the intervals—first I go up then down before reversing the pattern. The fingerings will be pretty logical and common, but, some latitude and creativeness will be needed at some point. Work out something that makes sense to you but doesn't stray too far from the typical scale fingering. Apply the same method to the other four scale patterns and maintain them in position. Fun times.
Ex. 6
Ex. 7
Now for some meat and potatoes. Ex. 8 uses the scale patterns we've been working on. The first two measures use the descending interval concept leading to the rotating major and minor intervals played in triplets in measure 3. Measure 4 is a "two-up, one-down" combination of intervals that lead to a couple of ascending intervals to end the line.
Ex. 8
Ex. 9 is designed to travel up the neck a little more, using scale patterns through several positions. The original idea in measure 1 is played in 5th position and uses rotating intervals. It's played again in measures 2 and 3 an octave up in 7th position, then is answered by the descending intervals in 10th position going into measure 4. As with any new concept, the challenge is to make music and not sound like you're playing an exercise. In these examples, I added some rhythmic variety, space, and musical range to create something that sounds more like a line, not like an exercise.
Ex. 9
This interval sequence can also be played on adjacent strings. Whether together or broken up, you can use them to move along the neck to switch positions while soloing, create a vamp, or add another note to get some funky bluesy three-note chords. See Ex. 10 for the mapping of these intervals on all adjacent string sets.
Ex. 11 adds the intervals on the 4th and 3rd strings to a traditional sounding blues-rock riff. Measures 1 and 3 are identical, and the notes of the intervals are held out to get a little more grit. Measure 2 has a descending run of the intervals to get to the bar line, finishing with another descending run of eighth-notes while switching string sets.
Ex. 11
In Ex.12, I was going for more of a triplet feel that traveled the length of the neck. Mission accomplished. But remember this pro tip: What looks great on paper can be a real pain to play. In measure 1, the intervals are not played in order, but skipping over one of them and then backtracking. After that I'm trying to exploit the b5–5 combination to get from the top two strings to the shapes on the 3rd and 2nd strings. The fingerings are pretty shape-oriented until you get to measure 4. My advice there is to be resourceful.
Ex. 12
Keep in mind, this is only one potential way to group the notes of the blues scale. Explore other possible two-note groupings, either in position or lengthwise up and down the neck. Create a three-note chord shape and run it through the scale just to see what you get. Play all of this with a backing track to really hear what it sounds like. Keep the good stuff and don't worry about the other stuff. There's always another way to look at a scale.
- Deep Blues: Pentatonic Passing Tones - Premier Guitar ›
- Beyond Blues: Moving Past the Pentatonic Scale - Premier Guitar ›
- Beyond Blues: The Mixo-Pentatonic Scale - Premier Guitar ›
- Know Your Chords—In Any Key - Premier Guitar ›
- Know Your Chords—In Any Key - Premier Guitar ›
Ernie Ball, the world’s leading manufacturer of premium guitar strings and accessories, proudly announces the launch of the all-new Earthwood Bell Bronze acoustic guitar strings. Developed in close collaboration with Grammy Award-winning guitarist JohnMayer, Bell Bronze strings are engineered to meet Mayer’s exacting performance standards, offering players a bold new voice for their acoustic guitars.Crafted using a proprietary alloy inspired by the metals traditionally found in bells and cymbals, Earthwood Bell Bronze strings deliver a uniquely rich, full-bodied tone with enhanced clarity, harmonic content, and projection—making them the most sonically complex acoustic strings in the Ernie Ball lineup to date.
“Earthwood Bell Bronze strings are a giant leap forward in tone, playability, and durability. They’re great in any musical setting but really shine when played solo. There’s an orchestral quality to them.” -John Mayer
Product Features:
- Developed in collaboration with John Mayer
- Big, bold sound
- Inspired by alloys used for bells and cymbals
- Increased resonance with improved projection and sustain
- Patent-pending alloy unique to Ernie Ball stringsHow is Bell Bronze different?
- Richer and fuller sound than 80/20 and Phosphor Bronze without sounding dark
- Similar top end to 80/20 Bronze with richer low end than Phosphor Bronze
Milkman’s Jerry Garcia-style JG-40 combo.
Grateful Dead-inspired gear from Milkman and Scarlet Fire helps to keep the guitarist’s sound alive.
Guitar players wanting to catch the Grateful Dead’s particular lightning in a bottle exist along a spectrum. Some are content to take inspiration from Jerry Garcia’s playing but make their own way regarding guitar choice and signal path. Others strive to emulate Garcia’s sonic decisions down to the most minor details and create signal paths as close to Jerry’s as possible. In recent years, an ecosystem of gear has developed around fostering Jerry Garcia’s electric tone, including everything from guitars, amps, and stompboxes to on-board preamps and speakers.
Entire books about the Grateful Dead’s gear have been written, so we can’t cover it all here. Garcia tinkered with all facets of his sound from about 1971 until 1978, when his signal path reached stability. By then, his On-Board Effects Loop—an innovation he developed to control how much signal reached his effects—was dialed in, his backline firm, and his choice of effects pedals solidified. Even then, adjustments were made, especially when MIDI arrived or when technology like in-ear monitoring was used. Here are some basics.
Scarlet Fire’s recreation of Garcia’s Wolf, originally built by Doug Irwin.
It starts with guitars. For players wanting to get their Jerry on, there’s a wide range of Garcia-esque instruments—with just as wide a range of prices—out there. Recreations of the Doug Irwin guitars and the Fender Alligator Strat abound. China-built models from companies likePhred Instruments can go for as little as $700 or so. Luthier Thomas Lieber apprenticed with Irwin long ago, and his Lieber Guitars will deliver a copy of a variety of Garcia models. Leo Elliott’sScarlet Fire Guitars out of Dallas, Texas, takes things in another direction. Elliott builds Doug Irwin replicas that start at $20,000 and go up from there, with a current wait time of about 18 months for an instrument. He’s outfitted many of the top Garcia guitarists today, including Tom Hamilton Jr. and Jeff Mattson. Elliott says, “I’m a self-taught luthier; I didn’t really build my first guitar until 2010. I understood a little bit about woodworking before I got started, but I learned by reading books and through trial and error. I started building replicas of Doug Irwin’s Wolf guitar right away, which is sort of like building a car and starting with a Ferrari. I didn’t know any better. Then, eventually I got to know Doug Irwin and collaborated with him. So, I got to hold Garcia’s Tiger guitar and get to know it really well, and by 2015, I had built replicas of that guitar. There’s one guy who helps me around the shop, but otherwise, I am building these guitars on my own. I’m collaborating with Doug Irwin on a new series of Tiger guitars, which will retail for 50 grand each.” That’s one way to get your Jerry going.
The JBL-inspired Milkman K-120.
Garcia’s choice of amplifiers is another matter. He preferred Fender Twin Reverbs loaded with JBL Alnico speakers, which were popular amongst many rock bands in the 1970s. The details get complicated; Garcia’s amps were heavily modified, and the Fender Twin served as a preamp that ran to a McIntosh MC-3500 power amp.
It’s hard to find vintage JBL speakers today—at least ones in good shape. San Francisco’s Milkman Sound, founded by Tim Marcus, has created a faithful reproduction of those classic JBLsthey call the K-120. They’re coupling those speakers with a Garcia-style recreation of his Fender Twin that Marcus named the JG-40. “I think 75 percent of Jerry’s tone is in the JBL speakers,” Milkman’s founder says. “But when you start to analyze the other 25 percent, you kind of have to start withDon Rich. [Editor’s Note: Rich was the guitar player in Buck Owens’ band, pioneers of the Bakersfield Sound.] That’s Jerry’s tone, too, but the difference is Garcia’s midrange was a bit throatier. It sounds clean, but really, it’s not clean at the same time. Especially his tone in the late ’70s. There is something about running that Fender Twin Reverb through the McIntosh that would just completely blow out the tone in a really interesting way.”
Garcia colored his tone with off-the-shelf effects. This was, after all, long before the days of boutique pedals. By 1978 and beyond, you’d hear him playing through an MXR Distortion+, an MXR Analog Delay, and an MXR Phase 100. He often used auto wahs, preferring the Musitronics Mu-Tron envelope filter as well as a Mu-Tron Octave Divider and a Mu-Tron combination volume and wah pedal.
When I asked Jeff Mattson, Bella Rayne, and Tom Hamilton Jr. exactly how orthodox they are about using the kind of gear that Garcia did, I got three different answers.
Mattson tells me that because Dark Star Orchestra is doing something very specific, he really has to tailor his sound as carefully to Garcia’s as he can. “Some folks get too hung up on small things, like what kind of cable to use and things like that, and I don’t go that far. But it’s important for Dark Star Orchestra to get Jerry’s sound right because we are covering different eras and different shows. In 2022, for example, we went to Europe and recreated shows from the Dead’s famous Europe ’72 tour, so you have to pay close attention to what kind of gear they were using to do that right.”
Hamilton works differently. He’s always preferred a higher-gain signal than Garcia ever did, landing in more of a British or heavy metal tone. (Randy Rhoads was a big influence.) “I’ve always approached it like, ‘What’s the new information we can put into this thing?’” he says. “Not just recreate but pushing in a forward direction. And anytime I’ve played with the guys who played with Garcia back in the day, they always said to me, ‘You’re here because you’re here. Don’t try and do what we did back in 1978 or do it because Garcia did it that way.’ They’ve always encouraged me to be myself.”
Bella Rayne is just wrapping her head around what it really means to try to sound like Garcia. “Besides Jerry, I’m influenced by guitarists like Dickey Betts and Derek Trucks, so my tone tends to be a bit heavier and bluesy,” she explains. “I’m generally running a Stratocaster through a Fender Twin Reverb. But recently, I was doing a show, and a buddy of mine set up a Jerry rig for me, and that was so cool: JBL speakers, McIntosh head, the whole setup. I had never played through one. I didn’t know what the hype was all about. I plugged in, and it was just amazing; there was such a snap, and I was really commanding the band. I can see myself keeping my current rig but adding a Dead-rig to experiment. But honestly, anything is fine; I am not picky. I just want to play the best that I can.”
Brent Mason is, of course, on of the most recorded guitarists in history, who helped define the sound of most ’90s country superstars. So, whether you know it or not, you’ve likely heard Mason’s playing.
Professional transcriber Levi Clay has done the deepest of dives into Brent Mason’s hotshot licks. At one point, he undertook the massive project of transcribing and sharing one of Mason’s solos every day for 85 or so days. Mason is, of course, on of the most recorded guitarists in history, who helped define the sound of most ’90s country superstars. So, whether you know it or not, you’ve likely heard Mason’s playing. Levi shares the insight he gleaned from digging deep, and he tells us what it was like when they shared a stage last year. Plus, Levi plays us some great examples of Mason’s playing.
PRS Guitars today launched five new three-pickup, 22-fret models across the S2 and SE series. The S2 Series release includes the S2 Special Semi-Hollow and S2 Studio, while the SE Series welcomes the SE Special Semi-Hollow, SE Studio, and SE Studio Standard.
“The distinctive pickup configurations of these five guitars deliver a versatile tonal platform, whether you’re exploring subtle textures or pushing the envelope. The deep dive into our Narrowfield technology is obvious with this launch. With both the S2 models made in our Maryland factory and the SE models made in Indonesia, our goal has been to create guitars that will inspire you and spark creativity, all at an exceptional value,” said PRS Guitars COO, Jack Higginbotham.
S2 Special Semi-Hollow
The PRS S2 Special Semi-Hollow features a pair of 58/15 LT humbuckers in the bass and treble positions and a PRS Narrowfield in the middle. A 5-way blade switch and two mini-toggles allow players to tap the humbuckers, creating twelve distinct pickup combinations for sonic exploration. The carved maple top and mahogany back encompass a semi-hollow body that adds a natural airiness and depth to the guitar’s tone while enhancing sustain.
S2 Studio
The PRS S2 Studio delivers a wide range of sonic possibilities through its distinctive single-single-hum configuration. Featuring two proprietary PRS Narrowfield pickups in the bass and middle positions and a 58/15 LT humbucker in the treble position, the S2 Studio offers a palette of sounds from single-coil clarity to vocal humbucker tones. This model also has a 5-way blade switch and push/pull tone control.
SE Special Semi-Hollow
The PRS SE Special Semi-Hollow is designed with the versatility of a hum/“single”/hum setup, bringing PRS’s Narrowfield DD pickup design to the SE Series in a classic maple-top guitar. The semi-hollow construction also enhances sustain and resonance, while the f-hole adds a classic aesthetic. The coil-tap switching system unlocks a wide range of tones through a pair of 58/15 LT “S” pickups in the bass and treble positions and a PRS Narrowfield DD “S” in the middle.
SE Studio
The PRS SE Studio’s “single”/”single”/hum pickup configuration provides a wide range of tonal options. This combination of PRS Narrowfield DD “S” bass and middle pickups with a PRS 58/15 LT “S” treble humbucker offers humbucking warmth, single-coil sparkle, and everything in between. The 5-way blade switch and push/pull tone control further enhance its versatility.
SE Studio Standard
The only bolt-on neck in this release group, the PRS SE Studio Standard brings the tone, playability, and versatility of the Studio model to the SE Series and into an all-mahogany design with a vintage-style pickguard aesthetic. At the heart of the SE Studio Standard is its versatile trio of pickups: an 58/15 LT “S” humbucker in the treble position with two Narrowfield DD “S” pickups in the middle and bass positions. The 5-way blade switch and push/pull tone control allow for an array of pickup configurations.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40th Anniversary limited-edition guitars throughout the year.