Nordstrand Pickups Releases the Bonecrusher

Humbucker that's optimized for output and brutally focused power.

Redlands, CA (September 23, 2016) -- The Bonecrusher is the most recent release of our Signature guitar pickup line. The Bonecrusher is a dual hex screw pickups with a massive alnico V magnet buried beneath the coils and a wind optimized for output and brutally focused power.

These all new pickups feature:

  • An oversized alnico 5 magnet
  • 12, slug-sized, adjustable steel poles
  • A more aggressive mid response than a traditional PAF
  • 50mm and 53mm string spacing
  • High output to drive the front end of the amp
  • 4 plus conductor wire for coil-splitting options
  • Available in black, white, and zebra

Order these today and unleash your inner Viking spirit!

Extensively designed, tested and built in the Nordstrand shop in Redlands, California, these pickups are available now at select dealers. Street prices start at $275 per set.

For more information:
Nordstrand Pickups

Photo 1

We’re almost finished with the aging process on our project guitar. Let’s work on the fretboard, nut, and truss rod cover, and prepare the headstock for the last hurrah.

Hello and welcome back to Mod Garage. This month we’ll continue with our relic’ing project, taking a closer look at the front side of the neck and treating the fretboard and the headstock. We’ll work on the front side of the headstock in the next part, but first we must prepare it.

Read More Show less
Ariel Posen on The Beatles' "Because" | Hooked

The Fab Four's complex chord choices and unique voicings struck an eye-opening note with this slide master.

Read More Show less