Weezer's Rivers Cuomo sits down with Shifty to talk Yngwie, Phish, and the outro solo to "Only in Dreams" off the “Blue” album.
"I don't use effects," Rivers Cuomo states, matter-of-factly, to Chris Shiflett on this second episode of Shred With Shifty. That might come as a bit of a shock to all the Weezer fans out there who went and bought a Big Muff in an effort to imitate the alt-rock guitarist's sound. For his tones on the band’s famous debut album, he went straight into his amp, and the only effect heard on that record, he says, was a bit of delay on the swells in "Only in Dreams."
The outro solo to "Only in Dreams," the final song on the album, is the subject of this ep. And after the guitarists spend a few minutes discussing Cuomo's inspirations, influences, and the production of both that album and the band's sleeper success, Pinkerton, Cuomo walks Shifty through the solo lick by lick. There's the sequence of octaves high up on the neck, colored by an unexpectedly placed major 7th chord ... and Cuomo's vibrato, which reminds Chris of Brian May. What shapes a guitarist's vibrato? “Must have something to do with your nerves between your brain and your fingers,” Cuomo says.
Before the recording of the album at Electric Lady Studios in NYC, Weezer's label insisted they work with a producer, which Cuomo rejected at first. Then he heard the Cars' "Just What I Needed" in the supermarket one day, and sought out the band's guitarist, Ric Ocasek. Ocasek was the one to push Cuomo to record an outro solo over the previously stripped-down, rhythm-section-based final three minutes of "Only in Dreams." After weeks of Ocasek's encouragement, Cuomo found himself alone in the studio one weekend and improvised his way through the solo. "This might be hard to believe, but when we started out, we were much more like a hippie band," Cuomo explains, describing his past devotion to Trey Anastasio. As it turns out, part of the "Only in Dreams" solo came out of Weezer's jamming portions of the song during their live shows.
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editors: Dan Destefano and Addison Sauvan
Special thanks to Chris Peterson, Gregory Nacron, and the entire Volume.com crew.
This convenient, easy-to-use controller can open up an entire world of sonic shape-shifting. Here are some tips to either inspire you to try one or expand how you’re currently using this flexible, creative device.
If you’re not yet using expression pedals, you should consider them. They have the power to expand and control your sonic universe. For the uninitiated, expression pedals are controllers that typically look like volume or wah pedals. Of course, traditional volume and wah pedals are expression pedals, too, but they are dedicated to controlling only those two effects.
Modern expression pedals allow you to assign and control parameters of your stomps or modelers by moving the expression pedal as you would a volume or wah. Dunlop, Boss, Ernie Ball, Yamaha, Behringer, Mission Engineering, and other manufacturers make these handy devices.
Many, but not all, of today’s stompboxes and modelers have expression pedal inputs that allow for manipulation of one or more parameters of those devices. In the past, this required bending over and turning a knob, or trying to turn a small knob with your foot—both of which can hamper your playing. The freedom of an expression pedal is the control you have over more aspects of your sound, especially in a live setting.
Although some of the uses for expression pedals below can also be accomplished by creating multiple presets, that will not allow real-time control over the parameters like an expression pedal will. Here are some notes about expression pedal use that might get you thinking about how one could help you.
Delay Repeats: Controlling the timing of a delay with tap tempo is very common, but how about controlling the number of repeats? With an expression pedal, by setting the expression control on your delay to control the number of repeats, you can easily go from a few for your rhythm sound to more for your lead sound, and then back off again.
Reverb and Delay Mix: The mix control on reverb and delay pedals allows you to balance the amount of wet to dry signal that you hear. There is often a delicate line to having just the right amount of wet signal with these two effects. If you have too much, your sound can be washed out and undefined. Too little and it can be dry and lack space. The part you are playing, and the venue you are in, can also change the amount of mix you need for these effects. By using an expression pedal for the mix control on reverb or delay, you can alter the sound on the fly to compensate for the part and the room, including turning down the mix for busy parts and up for parts with fewer notes.“Some uses for expression pedals can also be accomplished by creating multiple presets, but that will not allow real-time control over the parameters like an expression pedal will.”
Modulation Depth: The depth of a modulation effect, like a phaser, can drastically alter your guitar sound. A light amount can create a feeling of subtle movement, while a heavy amount can give a thick, underwater-type sound. An expression pedal can help you create a constant feeling of change throughout a song, allowing you to build up and break down the depth for different sections as you see fit.
Tremolo Speed: While the speed of tremolo can often be controlled by tap tempo, using an expression pedal for the same parameter offers other creative uses of the effect. With an expression pedal, you can easily speed the tremolo up to make subtle increases to the energy of a part or slow it down to decrease the energy. You can also create drastic changes in the speed that sound like a fan accelerating or slowing down. Or you can abruptly turn the tremolo off. This last option can be an exciting way to end a song or part.
EQ Change: Every guitar player uses EQ to sculpt their sound—whether via the tone controls on your instrument or amp (modelers included), or a dedicated equalizer used as part of your rig. Subtle tweaks can help you do things like balance out different guitars, cut through the mix more, or compensate for a boomy stage. Real-time control of EQ with an expression pedal is more common in the modeler world than the amp and pedal world, but it does exist in both. For example, increasing the midrange can give you more clarity and cut for solos. Decreasing it can create a flatter sound that can help you stay in the mix with the rest of the band. An expression pedal allows you to have one setting and alter it for multiple situations or guitars as opposed to having separate presets.
While this is a very short list of options for expression-pedal use, it should give you a good place to start. The most important thing is to always be creative, have fun, and find your own voice. An expression pedal can help you do all three.
Voltage Cable Company's new Voltage Vintage Coil 30-foot guitar cable is now protected with ISO-COAT technology to provide unsurpassed reliability.
The new coiled cables are available in four eye-grabbing retro colors – Surf Green, Electric Blue, Orange and Caramel – as well as three standard colors: Black, White and Red. There is also a CME exclusive “Chicago Cream” color on the way.
Guitarists can choose between three different connector configurations: straight/straight plugs, right angle/straight and right angle/right angle options.
The Voltage Vintage Coil offers superior sound quality and durability thanks to ISO-COAT treatment, a patent-pending hermetic seal applied to solder terminations. This first-of-its-kind airtight seal prevents corrosion and oxidization, a known factor in cable failure and degradation. ISO-COAT protected cables are for guitarists who value genuine lifetime durability and consistent tone throughout their career on stage and in the studio.
Voltage cables are hand made by qualified technical engineers using the finest components available and come with a lifetime warranty.
Voltage Vintage Coil features include:
- Lifetime guarantee, 1000+ gig durability
- ISO-COAT treatment - corrosion & oxidization resistant cable internals
- Strengthened structural integrity of solder terminations
Voltage Vintage Coils carry $89.00 USD pricing each and are available online at voltagecableco.com, as well as in select guitar stores in North America, Australia, Thailand, UK, Belgium and China.
About Voltage Cable: Established in 2021, Voltage Cable Co. is a family owned and operated guitar cable company based in Sydney, Australia. All their cables are designed to be played, and built for a lifetime. The company’s ISO-COAT is a patent pending hermetic seal applied to solder terminations.
Featuring dual-engine processing, dynamic room modeling, and classic mic/speaker pairings, this pedal delivers complete album-ready tones for rock and metal players.
Built on powerful dual‑engine processing and world‑class UAD modeling, ANTI 1992 High Gain Amp gives guitarists the unmistakable sound of an original "block letter" Peavey 5150 amplifier* – the notorious 120‑watt tube amp monster that fueled more than three decades of modern metal music, from Thrash and Death Metal, to Grunge, Black Metal, and more.
"With UAFX Dream, Ruby, Woodrow, and Lion amp emulators, we recreated four of the most famous guitar amps ever made," says UA Sr. Product Manager Tore Mogensen. "Now with ANTI, we're giving rock and metal players an authentic emulation of this punishing high gain amp – with the exact mic/speaker pairings and boost/noise gate effects that were responsible for some of the most groundbreaking modern metal tones ever captured."
Key Features:
- A complete emulation of the early '90s 120‑watt tone monster that defined new genres of modern metal
- Powerful UAFX dual-engine delivers the most authentic emulation of the amp ever placed in a stompbox
- Complete album‑ready sounds with built‑in noise gate, TS‑style overdrive, and TC‑style preamp boost
- Groundbreaking Dynamic Room Modeling derived from UA's award-winning OX Amp Top Box
- Six classic mic/speaker pairings used on decades of iconic metal and hard rock records
- Professional presets designed by the guitarists of Tetrarch, Jeff Loomis, and The Black Dahlia Murder
- UAFX mobile app lets you access hidden amp tweaks and mods, choose overdrive/boost, tweak noise gate, recall and archive your presets, download artist presets, and more
- Timeless UA design and craftsmanship, built to last decades
For more information, please visit uaudio.com.
- YouTube
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true stack, and just four stomps.
MonoNeon, aka Dywane Thomas Jr., came up learning the bass from his father in Memphis, Tennessee, but for some reason, he decided to flip his dad’s 4-string bass around and play it with the string order inverted—E string closest to the ground and the G on top. That’s how MonoNeon still plays today, coming up through a rich, inspiring gauntlet of family and community traditions. “I guess my whole style came from just being around my grandma at an early age,” says Thomas.His path has led him to collaborate with dozens of artists, including Nas, Ne-Yo, Mac Miller, and even Prince, and MonoNeon’s solo output is dizzying—trying to count up his solo releases isn’t an easy feat. Premier Guitar’s Chris Kies caught up with the bassist before his show at Nashville’s Exit/In, where he got the scoop on his signature 5-string, Ampeg rig, and simple stomp layout, as well as some choice stories about influences, his brain-melting playing style, and how Prince changed his rig.
Brought to you by D’Addario.
Orange You Glad to See Me?
This Fender MonoNeon Jazz Bass V was created after a rep messaged Thomas on Instagram to set up the signature model, over which Thomas had complete creative control. Naturally, the bass is finished in neon yellow urethane with a neon orange headstock and pickguard, and the roasted maple neck has a 10"–14" compound radius. It’s loaded with custom-wound Fireball 5-string Bass humbuckers and an active, 18V preamp complete with 3-band EQ controls. Thomas’ own has been spruced up with some custom tape jobs, too. All of MonoNeon's connections are handled by Sorry Cables.
Fade to Black
MonoNeon’s Ampeg SVT stack isn’t a choice of passion. “That’s what they had for me, so I just plugged in,” he says. “That’s what I have on my rider. As long as it has good headroom and the cones don’t break up, I’m cool.”
Box Art
MonoNeon’s bass isn’t the only piece of kit treated to custom color jobs. Almost all of his stomps have been zhuzhed up with his eye-popping palette.
Thomas had used a pitch-shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. “When I started playing with Prince, he put the Whammy on my pedalboard,” Thomas explains. “After he passed, I realized how special that moment was.”
Alongside the Whammy, MonoNeon runs a Fairfield Circuitry Randy’s Revenge (for any time he wants to “feel weird”), a literal Fart Pedal (in case the ring mod isn’t weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
Shop MonoNeon's Rig
Fender MonoNeon Jazz Bass V
Ampeg SVT
DigiTech Whammy
CIOKS SOL