
Lilas Mayassi (left) and Shery Bechara (right) are the founding guitarists of the all-female Lebanese thrash-metal band, Slave to Sirens, as seen in the documentary Sirens, directed by Rita Baghdadi.
Guitarists Shery Bechara and Lilas Mayassi discuss fighting to make music amid political unrest, societal strife, generational trauma, and more.
There’s a moment in the documentary Sirens when Blaakyum’s Bassem Deaibess declares that heavy metal is “100 percent pure sacrifice.” Deaibess says this to Shery Bechara, one half of the guitar tandem in Slave to Sirens, the all-women thrash-metal band from Lebanon who are the focus of the new film,directed by Rita Baghdadi. Deaibess was a close friend to Slave to Sirens in the band's early days. “I think what he meant by that was, you give a lot, for a long time, and don’t expect anything in return, especially if it’s here in Lebanon,” explains Bechara. “There’s so much sacrifice.”
Though much of Sirens ultimately focuses on guitarist Lilas Mayassi’s coming out, and how that inadvertently creates turmoil with her bandmates, Baghdadi’s deft filmmaking simultaneously captures just how challenging it is for a band like Slave to Sirens to even exist in the Middle East, much less grab the proverbial brass ring. Aside from the familiar struggles one might encounter in pursuit of a music career (or any artistic endeavor, for that matter), Slave to Sirens finds themselves face-to-face with cultural dogma, political protests, regional unrest, catastrophic disasters, and limited opportunities. The film is a metaphorical back-and-forth between the band’s own struggles and societal dysfunction writ large, but the magnitude of their quest is perhaps best amplified when Bechara’s father, Roger, tells her that less than one percent of the population in the Middle East listens to metal. You could make the argument that heavy metal is a fairly marginalized musical genre in the United States, but in the Middle East, a queer, all-female thrash-metal band is literally an against-all-odds gambit.
And yet, through sacrifice, fierce commitment to their ideals (some of which emerge throughout the film), and perseverance, Slave to Sirens starts to gain some traction within the metal community, particularly outside of Lebanon. Their performance at Glastonbury Festival in 2019 is a pivotal moment in the film. Solicited by Earache Records to perform on one of their stages, it is Slave to Sirens’ first international gig, and a seemingly triumphant opportunity. Their time slot, however, runs simultaneous with a Babymetal performance on one of the main stages, so they are left playing to a single-digit audience. Baghdadi artfully crafts an emotional rollercoaster from such bittersweet moments. Think ABC’s “The thrill of victory … and the agony of defeat” slogan from Wide World of Sports in the 1970s—disappointment and exaltation abound equally.
Slave To Sirens - Salomé (OFFICIAL MUSIC VIDEO)
“Glastonbury was an amazing experience, and we learned a lot from it,” says Mayassi, who seems far more upbeat about it now than she did in the film. “We were unlucky in the time slot, but we didn’t really care, because the point for us was just performing and having fun.” It’s been about four years since Sirens was shot, so distance clearly provides some perspective.
“I think whatever happened with us, especially with the revolution and the port explosion, it just stays there—it stays and inspires, and everything that happens affects us personally and musically.”—Lilas Mayassi
Slave to Sirens was formed by a chance encounter between Bechara and Mayassi in 2015 in Lebanon during an anti-government protest regarding a waste management crisis. In 2018, they independently released their debut EP, Terminal Leeches, which pricked up some ears around the globe, leading to the invitation from Earache to perform at Glastonbury. Lyrically, the band addresses much of the societal strife that seems to plague the Middle East. Musically, the songs are infused by the thrash and death metal influences of their youth, and Mayassi and Bechara both attack their instruments with a kind of swagger that belies their years.
Shery Bechara's Gear
Bechara is the lead guitarist in Slave to Sirens, but both she and rhythm guitarist Mayassi write equally and switch on parts whenever the mood takes over.
Photo by Sally Mïre
Guitars
- Vox Custom 25
- Dean Dime Razorback Slime Bumblebee
- Dean Exile Select 7-string Multiscale
Amps
- Peavey Heritage VTX Series 12-watt 2x12 combo
Effects
- Line 6 POD HD500 multi-effect/amp modeler
Strings and Picks
- Fender 250R Nickel-Plated Steel .010–.046 strings
- D’Addario Regular Light XL .010–.046 strings
- Ernie Ball 2215 Skinny Top Heavy Bottom Slinky .010–.052 strings
- Dunlop Ultex Jazz III 1.38 mm picks
- Dunlop Primetone Jazz III 1.4 mm picks
- Dunlop John Petrucci Jazz III 1.5 mm picks
- Levy’s Leathers guitar straps
- D’Addario Planet Waves cables
The guitar playing is tight and tenacious, featuring quirky, unexpected rhythmic patterns courtesy of Mayassi, and nuanced melodic note choices and phrasing from Bechara. In 2022, the band, which also included bassist Alma Doumani, drummer Tatyana Boughaba, and singer Maya S. Khairallah, released the bludgeoning single “Salomé,” but as of January 1, 2023, they announced on social media that Khairallah and Boughaba had left the band, and introduced Anita Tóth from Hungary as their new lead singer. There’s been no official announcement yet regarding their new drummer. According to Mayassi, they’ve currently tracked about 80 percent of the guitars and bass for a new album. “We have new members,” she clarifies. “So, we’re trying to finish the vocals.” She says they’re mixing at Dyne Engine Studio in Italy with Manuele Pesaresi, who worked with them on Terminal Leeches.
“I think what he meant by that was, you give a lot, for a long time, and don’t expect anything in return, especially if it’s here in Lebanon.”—Shery Bechara
According to the film credits, Mayassi and Bechara occupy fairly distinct roles in Slave to Sirens—Mayassi is billed as the rhythm guitarist, while Bechara is billed “lead guitar.” Mayassi admits that she’s mostly fascinated by the rhythmic aspects of a song. “My focus always shifts to the drums and bass,” she explains. “Shery is more about the soloing and all the dynamics that truly animate a song—she adds the color.”
Bechara describes Mayassi’s style as rough and very thrashy. “She loves the ‘djent, djent, djent,’” she says. “I like that, too, but she has a different approach to it than me. Also, she’s really good on the clean parts, with chorus and vibrato—I see something in her eyes. It’s like, ‘Mm-hmm [laughs].’”
Lilas Mayassi's Gear
Mayassi started playing guitar at age 13, and would spend hours at an internet cafe studying shredders on YouTube.
Photo by Sally Mïre
Guitars
- DBZ Venom Flying V
- Dean Thoroughbred Select
Amps
- Marshall MG30FX 30-Watt 1x10 combo
- Marshall JCM800 2203X 100-watt head
Effects
- Electro-Harmonix Memory Man XO Analog Delay/Chorus/Vibrato
- DigiTech DF-7 Distortion Factory
Strings and Picks
- Ernie Ball Regular Slinky .010–.046 strings
- Ernie Ball Power Slinky .011–.048 strings
- Dunlop John Petrucci Jazz III 1.5 mm picks
Despite such seemingly clear-cut differences in how they approach guitar parts, there is a moment in the documentary when the two are working on a song idea and Mayassi is playing the single-note melodic phrases, while Bechara backs her up on rhythm. So clearly there’s some wiggle room when inspiration strikes. “Whenever I feel like I have an idea, I’ll solo over it,” says Mayassi. “If Shery has an idea, she solos over it. We just go with the flow, whatever we feel like [laughs].”
Both Mayassi and Bechara picked up the guitar in their teens and were mostly self-taught. Mayassi started playing when she was just 13. “I didn’t have access to guitar lessons or anything, so I relied more on a friend in high school who would take pictures of his playing and I would mimic his finger position on the fretboard,” she explains. She would also go once a week to an internet cafe to watch hours of guitar shredding on YouTube. “That was the turning point for me. I started learning, through the videos—that’s what I had access to.” Today, she holds a bachelor’s degree in music education from Lebanese University (LU).
Bechara says she learned from her dad but is also mostly self-taught. She did study for a month at a music school and wants to go back. “I want to learn more things and improve,” she says. “There’s always something to learn. I’m trying to get into music theory and put technique with it.”
Terminal Leeches is the 2018 debut EP by Slave to Sirens, and was recorded at Dyne Engine Studio in Castelfidardo, Italy, with Manuele Pesaresi. The band is currently putting the finishing touches on a new album at Pesaresi’s studio.
As for influences, Bechara says her dad was into rock, blues, and jazz, so those genres influenced her as she was starting out, but she quickly got into heavy metal. “[My dad] never was into metal,” she chuckles. “He used to tell me, ‘You’ll get over it,’ but when he saw how committed I was, and he heard a few bands that I listened to, like Iron Maiden and Carach Angren, he was like, ‘Okay, the riffing on the guitar is very, very good,’ but he’s not into the growling [laughs].”
“I didn’t have access to guitar lessons or anything, so I relied more on a friend in high school who would take pictures of his playing and I would mimic his finger position on the fretboard.”—Lilas Mayassi
Mayassi lists Joan Jett as perhaps her biggest inspiration, but also name-checks Alexi Laiho from Children of Bodom, Steve Vai, and Joe Satriani. “Then I fell in love with thrash and death metal,” she says. “So, it’s like Testament, all the ‘Big Four’ bands [Metallica, Megadeth, Slayer, and Anthrax], and Death, the band.”
Aside from musical influences, Mayassi raises the specter of inherited trauma in the film and the impact that has had on their personal and professional lives. “My parents were kids back when the civil war started [in 1975],” she says. “They were affected by what happened, and that trauma, that fear—it’s some kind of pessimism. These events leave some kind of a scar that doesn’t really go away. The body stores trauma, and it appears in the form of stress. And now, I think whatever happened with us, especially with the revolution and the port explosion, it just stays there—it stays and inspires, and everything that happens affects us personally and musically.”
YouTube It
Sirens is a documentary that follows the Lebanese metal band Slave to Sirens as the five members fight to make a path in music while dealing with societal and personal conflict in their home country.
As for her coming out while shooting the documentary, Mayassi says, “One of the main reasons I felt unapologetically myself in this documentary is because I had the girls with me.” But in a culture that essentially prohibits same-sex relations, and LGBTQ rights are fairly nonexistent, Mayassi admits to being concerned about the fallout from the film. “When the film was released, I started realizing, ‘Okay, I think it’s going to be a problem,’” she says. “We had a lot of tough conversations with Rita. We were lucky that she was able to understand where we come from, and our concerns were respected. But when the film happened to spotlight me and my friends, first I had concerns about their safety, and then the safety of the band. So, at the start, we didn’t feel bad, but during the last years of filming, we started being aware more and more.”
The documentary closes out with the aptly titled Sound of Resilience concert, which was organized by Baalbeck International Festival, and led by conductor Harout Fazlian and the Lebanese Philharmonic Orchestra. It took place on July 5, 2020, at the Temple of Bacchus. Both Bechara and Mayassi are featured on guitar during a performance of Led Zeppelin’s “Kashmir.” It’s an auspicious moment, in a stunning setting, that seems to foretell a promising future for the two of them. “It was a new experience and a huge honor,” says Bechara. “Actually, playing with an orchestra was something like a dream.”
After eight years, New Orleans artist Benjamin Booker returns with a new album and a redefined relationship to the guitar.
It’s been eight years since the New Orleans-based artist released his last album. He’s back with a record that redefines his relationship to the guitar.
It is January 24, and Benjamin Booker’s third full-length album, LOWER, has just been released to the world. It’s been nearly eight years since his last record, 2017’s Witness, but Booker is unmoved by the new milestone. “I don’t really feel anything, I guess,” he says. “Maybe I’m in shock.”
That evening, Booker played a release celebration show at Euclid Records in New Orleans, which has become the musician’s adopted hometown. He spent a few years in Los Angeles, and then in Australia, where his partner gave birth to their child, but when he moved back to the U.S. in December 2023, it was the only place he could imagine coming back to. “I just like that the city has kind of a magic quality to it,” he says. “It just feels kind of like you’re walking around a movie set all the time.”
Witness was a ruminative, lonesome record, an interpretation of the writer James Baldwin’s concept of bearing witness to atrocity and injustice in the United States. Mavis Staples sang on the title track, which addressed the centuries-old crisis of police killings and brutality carried out against black Americans. It was a significant change from the twitchy, bluesy garage-rock of Booker’s self-titled 2014 debut, the sort of tunes that put him on the map as a scrappy guitar-slinging hero. But Booker never planned on heroism; he had no interest in becoming some neatly packaged industry archetype. After Witness, and years of touring, including supporting the likes of Jack White and Neil Young, Booker withdrew.
He was searching for a sound. “I was just trying to find the things that I liked,” he explains. L.A. was a good place for his hunt. He went cratedigging at Stellaremnant for electronic records, and at Artform Studio in Highland Park for obscure jazz releases. It took a long time to put together the music he was chasing. “For a while, I left guitar, and was just trying to figure out what I was going to do,” says Booker. “I just wasn’t interested in it anymore. I hadn’t heard really that much guitar stuff that had really spoke to me.”
“For a while, I left guitar, and was just trying to figure out what I was going to do. I just wasn’t interested in it anymore.”
LOWER is Booker’s most sensitive and challenging record yet.
Among the few exceptions were Tortoise’s Jeff Parker and Dave Harrington from Darkside, players who moved Booker to focus more on creating ambient and abstract textures instead of riffs. Other sources of inspiration came from Nicolas Jaar, Loveliescrushing, Kevin Shields, Sophie, and JPEGMAFIA. When it came to make LOWER (which released on Booker’s own Fire Next Time Records, another nod to Baldwin), he took the influences that he picked up and put them onto guitar—more atmosphere, less “noodly stuff”: “This album, I was working a lot more with images, trying to get images that could get to the emotion that I was trying to get to.”
The result is a scraping, aching, exploratory album that demonstrates that Booker’s creative analysis of the world is sharper and more potent than ever. Opener “Black Opps” is a throbbing, metallic, garage-electronic thrill, running back decades of state surveillance, murder, and sabotage against Black community organizing. “LWA in the Trailer Park” is brighter by a slim margin, but just as simultaneously discordant and groovy. The looped fingerpicking of “Pompeii Statues” sets a grounding for Booker to narrate scenes of the homelessness crisis in Los Angeles. Even the acoustic strums of “Heavy on the Mind” are warped and stretched into something deeply affecting; ditto the sunny, garbage-smeared ’60s pop of “Show and Tell.” But LOWER is also breathtakingly beautiful and moving. “Slow Dance in a Gay Bar” and “Hope for the Night Time” intermingle moments of joy and lightness amid desperation and loneliness.
Booker worked with L.A.-based hip-hop and electronic producer Kenny Segal, trading stems endlessly over email to build the record. While he was surrounded by vintage guitars and amps to create Witness, Booker didn’t use a single amplifier in the process of making LOWER: He recorded all his guitars direct through an interface to his DAW. “It’s just me plugging my old Epiphone Olympic into the computer and then using software plugins to manipulate the sounds,” says Booker. For him, working digitally and “in the box” is the new frontier of guitar music, no different than how Hendrix and Clapton used never-heard-before fuzz pedals to blow people’s minds. “When I look at guitar players who are my favorites, a lot of [their playing] is related to the technology at the time,” he adds.
“When I look at guitar players who are my favorites, a lot of [their playing] is related to the technology at the time.”
Benjamin Booker's Gear
Booker didn’t use any amps on LOWER. He recorded his old Epiphone Olympic direct into his DAW.
Photo by Trenity Thomas
Guitars
- 1960s Epiphone Olympic
Effects
- Soundtoys Little AlterBoy
- Soundtoys Decapitator
- Soundtoys Devil-Loc Deluxe
- Soundtoys Little Plate
“I guess I have a problem with anything being too sugary. I wanted a little bit of ugliness.”
Inspired by a black metal documentary in which an artist asks for the cheapest mic possible, Booker used only basic plugins by Soundtoys, like the Decapitator, Little AlterBoy, and Little Plate, but the Devil-Loc Deluxe was the key for he and Segal to unlock the distorted, “three-dimensional world” they were seeking. “Because I was listening to more electronic music where there’s more of a focus on mixing than I would say in rock music, I think that I felt more inspired to go in and be surgical about it,” says Booker.
Part of that precision meant capturing the chaos of our world in all its terror and splendor. When he was younger, Booker spent a lot of time going to the Library of Congress and listening to archival interviews. On LOWER, he carries out his own archival sound research. “I like the idea of being able to put things like that in the music, for people to just hear it,” says Booker. “Even if they don’t know what it is, they’re catching a glimpse of life that happened at that time.”
On “Slow Dance in a Gay Bar,” there are birds chirping that he captured while living in Australia. Closer “Hope for the Night Time” features sounds from Los Angeles’ Grand Central Market. “Same Kind of Lonely” features audio of Booker’s baby laughing just after a clip from a school shooting. “I guess I have a problem with anything being too sugary,” says Booker. “I wanted a little bit of ugliness. We all have our regular lives that are just kind of interrupted constantly by insane acts of violence.”
That dichotomy is often difficult to compute, but Booker has made peace with it. “You hear people talking about, ‘I don’t want to have kids because the world is falling apart,’” he says. “But I mean, I feel like it’s always falling apart and building itself back up. Nothing lasts forever, even bad times.”
YouTube It
To go along with the record, Booker produced a string of music videos influenced by the work of director Paul Schrader and his fascination with “a troubled character on the edge, reaching for transcendence.” That vision is present in the video for lead single “LWA in the Trailer Park.”
Note the cavity cover on the back, which houses the components of Andy Summers’ mid-boost system.
We’ve covered Andy’s iconic guitar and what makes it so special, so now we’ll get to building our own.
Hello and welcome back to Mod Garage for the second installment of the Andy Summers Telecaster wiring. We covered many of the details of this unique guitar last time, so now we’ll jump right in to assembling your own.
In general, you can use any Telecaster and convert it to Andy Summers’ specs. If you want to stay as close as possible to the original guitar, the way to go is an alder body—just like Andy’s, which is 2-piece—with a 3-tone sunburst finish and white double binding.
The neck should be quarter-sawn, 1-piece maple with a C profile, 21 vintage-style frets, and a 7.25" fretboard radius. Of course, you can choose your own specs here, too. The original guitar has a brass nut rather than bone or plastic, and it should be no problem to find a brass nut blank for a Telecaster. You will need different tools to work on it compared to bone, plastic, or graphite, so keep this in mind. If you do not have the right tools or don’t feel comfortable making nuts, you should leave this task to your local guitar tech. Summers’ guitar has Schaller M6 tuning machines, which are still available from the German Schaller company, and two chrome butterfly string trees. You may not really need two of them—usually one for the B and the high E string will do the trick, especially with a well-made nut.
The original has a heavy brass bridge plate with six individual brass saddles, which will increase overall weight significantly. You can still buy this type of brass bridge from several companies, but there are much lighter bridges on the market.
The stereo output jack is installed in a rectangular chrome plate, like on a Les Paul, which I think is superior to the typical Telecaster jack cup. Interestingly, the plate on Summers’ guitar is only held by two of four screws, but do yourself a favor and use all four to make this spot as strong as possible. You should attach the plate really tight, especially when you use an output jack with a tight grip for the plug.
“Electronically, there is nothing too specialized that you will need for the controls.”
The rest of the hardware is chrome and standard: two regular strap buttons, a standard Telecaster control plate, ’60s Telecaster flat-top knobs, a black ’60s-style top-hat switch knob on the 3-way pickup selector switch, and two flat-lever mini-toggle switches. You should have no problem getting all of these parts from any guitar shop. The pickguard is a 3-ply mint green pickguard with a standard humbucker routing for the neck pickup.
Electronically, there is nothing too specialized that you will need for the controls: a standard 3-way pickup selector switch, two 250k audio pots for master volume and master tone, a gain control pot for the booster, and two additional mini DPDT on-on toggle switches for switching the booster on and off and for the phase control of the bridge pickup. The resistance of the gain control pot depends on the booster you want to use: e.g. for the Fender Clapton mid-boost kit, a 500k type will work great.
For the bridge pickup, there is a standard early-’60s-style Telecaster single-coil pickup, and every pickup company will have something like this in their catalog. Because the bridge pickup is installed to an out-of-phase mini-toggle switch, your pickup will need three conductors, with the metal base plate separated from the pickup’s common ground, and a third wire that connects the bridge plate individually to ground. If you have a regular two-conductor model, you need to break this connection, soldering a third wire directly to the base plate.
Interestingly, the bridge pickup on Summers’ Tele is installed directly into the wood of the pickup’s cavity. I see no reason why you shouldn’t install it the regular way on your guitar.
Here’s a close-up of the bridge on Summers’ historic Tele.
Photo courtesy of Ten-Guitars (https://ten-guitars.de)
In the neck position, there is a ’59 PAF humbucker with a conventional two-conductor wiring installed directly into the pickguard in the standard way, with the open pole pieces facing towards the neck. The choice of late-’50s PAF copies has never been better than it is today. You can buy excellent versions from a lot of companies, just make sure to choose the correct string spacing, which is usually called “F-spacing” or something similar, and is usually 2.070" (52.6 mm). (Gibson spacing, or G-spacing, is 1.930" or 49 mm.)
You’ll need humbucker routing on your body to make it fit. If you don’t have a body with humbucker routing and don’t want to get your Tele body re-routed, you can consider one of the numerous stacked humbuckers that will fit into a standard Telecaster neck pickup cavity. My experience is that there is a noticeable difference in tone compared to a full-sized humbucker, and it will be a compromise.
Next is the active booster. Finding a good booster module and wiring it up is much easier than fitting it into the tight space of a Telecaster body. There are a wide range of available booster options. There are complete DIY sets available that include the PCB and all of the necessary parts to build your own, and there are also drop-in PCBs that are already populated, like the well-known Fender mid-boost circuit kit. You can also find mini-sized booster modules using high-quality SMD parts, which only require a fraction of space compared to the regular PCBs.
“Finding a good booster module and wiring it up is much easier than fitting it into the tight space of a Telecaster body.”
The available options include treble boosters, mid-boost circuits, full-range boosters, etc. Choose what you like best. The problem will be that you need to stuff it into a Telecaster body. As you know, there is not much space inside a Telecaster, and you need to add the booster itself, the 9V battery, an additional pot for controlling the booster, and two additional mini-toggle switches—one for turning the booster on and off, and the other to get the bridge pickup out of phase. This is a lot of stuff! On Summers’ guitar, this problem was solved by adding a large cavity on the back and closing it with a plastic back plate, as on a Gibson Les Paul.
A look inside the cavity for the mid-boost unit.
Photo courtesy of TeleManDon from Vancouver Island, BC (https://tdpri.com)
You can clearly see the two big routings for the booster’s PCB and the 9V battery, plus the additional pot to control the amount of boost as well as the mini-toggle switch to turn the booster on and off. If you are not afraid of routing two big chambers into your Telecaster’s body, this is a suitable way to go.
On a Telecaster, there are not many alternatives I can think of to fit all these parts. One possible way of saving space would be to use a stacked pot with two 250k pots for volume and tone, so you have the second hole in the control plate available for the gain control pot of the booster. Between the two pots, it should be no problem to place the two mini-toggle switches. Or you use a push-pull pot for the gain control to save one of the mini-toggle switches. The guitar will look much cleaner, at least from the front side. But you still have to put the booster PCB and the battery somewhere. A customer of mine did this by completely routing the area under the pickguard. But even with only a regular single-coil neck pickup, it was a really tight fit, so with a regular-sized humbucker, it will be close to impossible. So, you or your luthier will have to be creative, and I wouldn’t be surprised if a company offers Andy Summers Telecaster bodies with all chambers already routed.
Here we go for the wiring. Wherever possible, I tried to keep the diagram as clean as possible. The wiring of the booster is only an example and depends on the booster you want to use, but the basic wiring is always the same.
Here’s a helpful schmatic of the Andy Summers‘ Telecaster wiring.
Illustration courtesy of SINGLECOIL (www.singlecoil.com)
That’s it. Next month, we will take a deep look into guitar cables and wires, what really makes a difference, and how you can use this to reshape your guitar tone. So stay tuned!
Until then ... keep on modding!
Featuring authentic tape behavior controls and full MIDI implementation, the EC-1 is a premium addition to any guitarist's setup.
Strymon Engineering, the Los Angeles-based company behind premium products for the guitar, plugin, and Eurorack markets, announced a new single-head tape echo pedal in their newer small format today, called the EC-1. Initially based around the award-winning dTape algorithm that helped to make the El Capistan pedal an industry titan, development took a different turn when Strymon acquired an immaculate and heavily modified tube Echoplex® EP-2. The new true stereo pedal features two models of the EP-2’s tube preamp with variable gain, as well as a three-position Record Level switch that allows for additional gain control. Glitchless tap tempo allows tapping in new tempos without tape artifacts, and the Tape Age and Mechanics controls modify a large number of parameters under the hood to deliver authentic tape behavior at any setting. Other features include TRS stereo Ins and Outs, full MIDI implementation, TRS MIDI, arear-panel audio routing switch, USB-C and 300 presets. Being true stereo, the EC-1 processes the left and right inputs independently, allowing it to be placed anywhere in the signal chain.
“We decided to start the project by investigating the preamps from tube echo units, so I bought an original Echoplex® EP-2 to begin the process”, said Gregg Stock, Strymon CEO and analog circuit guru. “It showed up in pristine condition and sounded amazing, and we found out later that it had been heavily modified by storied guitar tech Cesar Diaz. His mods created a single unit with the best attributes of both tube and solid-state Echoplexes, so we spent a bunch of time figuring out how to recreate its behavior.” Pete Celi, Strymon co-founder, and DSP maven said “It was so clean and mechanically stable that other nuances stood out more prominently -chief among them being some capstan-induced variations that help to widen the spectrum of the repeats. With the Mechanics control at around 1 pm, you get a hyper-authentic representation of that golden EP-2 unit, with a high-speed flutter that adds dimension to the echoes.”
EC-1 is available now directly from Strymon and from dealers worldwide for $279 US.
For more information, please visit strymon.net.
Brickhouse Toneworks BH-90 pickups offer the legendary tone of a classic P-90 in a humbucker-sized package, with zero hum.
Brickhouse Toneworks, a new manufacturer of high-quality and innovative guitar pickups, has announced the release of the BH-90 pickup. This hum-canceling design offers the legendary tone and responsiveness of a classic P-90 in a humbucker-sized package -- with absolutely zero hum.
The BH-90 captures the true personality of the beloved single coil P-90 tone – its grit, sparkle, and touch sensitivity to playing dynamics – while eliminating the notorious hum that often limits their use.
Available individually or as matched sets, these pickups effortlessly respond to your playing touch, delivering delicate cleans to aggressive distortion. You’ll get P-90 soul in a humbucker size: the BH-90 seamlessly replaces existing humbuckers with no modifications required. They drop right in where your existing humbuckers live.
Key Features of the BH-90
- Cast Alnico 5 Magnets; 500k Pots & .022uf Cap recommended.
- Ultra quiet: Hum-canceling design, and lightly potted to minimize squeal.
- Classic design: vintage external braided lead wire, with output comparable to vintage '50s P-90
- Bridge: 19.5k (Average), Neck 17.5k (Average). Note: the BH-90’s DCR reading is much higher than normal single coil P-90s due to the nature of their hum-canceling design. This is a case where DCR should not be considered as a measurement of output because these are equivalent in output to a vintage P-90 that ranged in DCR readings between 7-9k.
- Made in the USA with premium quality materials.
The BH-90 street price starts at $170 each and starts at $340 per set.
For more information, please visit brickhousetone.com.