The accomplished guitarist and teacher’s new record, like her lifestyle, is taut and exciting—no more, and certainly no less, than is needed.
Molly Miller, a self-described “high-energy person,” is fully charged by the crack of dawn. When Ischeduled our interview, she opted for the very first slot available—8:30 a.m.—just before her 10 a.m. tennis match!
Miller has a lot on her plate. In addition to gigs leading the Molly Miller Trio, she also plays guitar in Jason Mraz’s band, and teaches at her alma mater, the University of Southern California (USC), where, after a nine-year stint, she earned her bachelor’s, master’s, and doctorate in music. In 2022, she became a professor of studio guitar at USC. Prior to that, she was the chair of the guitar department at the Los Angeles College of Music.
Molly Miller's Gear
Miller plays a fair bit of jazz, but considers herself simply a guitarist first: “Why do I love the guitar? Because I discovered Jimi Hendrix.”
Photo by Anna Azarov
Guitars
- 1978 Gibson ES-335
- Fender 1952 Telecaster reissue with a different neck and a bad relic job (purchased from Craigslist)
- Gibson Les Paul goldtop with P-90s
Amps
- Benson Nathan Junior
- Benson Monarch
- Fender Princeton Reverb Reissue (modified to “widen sound”)
Effects
- Chase Bliss Audio Dark World
- Chase Bliss Audio Warped Vinyl
- EarthQuaker Devices Dispatch Master
- EarthQuaker Devices Dunes
- EarthQuaker Devices Special Cranker
- JAM Pedals Wahcko
- JAM Pedals Ripply Fall
- Strymon Flint
- Fulltone Clyde Wah
- Line 6 Helix (for touring)
Strings & Picks
- Ernie Ball .011s for ES-335 and Les Paul
- Ernie Ball .0105s for Telecaster
- Fender Celluloid Confetti 351 Heavy Picks
To get things done, Miller has had to rely on a laser-focused approach to time management. “I’ve always kind of been juggling different aspects of my career. I was in grad school, getting a doctorate, TA-ing full time—so, teaching probably 20 hours a week, and then also doing probably four or five gigs a week, and getting a degree,” explains Miller. “I had to figure out how to create habits of, ‘I really want to play a lot of guitar, and gig a lot, but I also need to finish my degree and make extra money teaching, and I also want to practice.’ There’s a certain level of organization and thinking ahead that I always feel like I have to be doing.”
“The concept of the Molly Miller Trio—and also a part of my playing—is we are playing songs, we are bringing back the instrumental, we are thinking about the arrangement.”
The Molly Miller Trio’s latest release, The Battle of Hotspur, had its origins during the pandemic. Miller and bassist Jennifer Condos started writing the songs in March 2020, sending files back and forth to each other. They finally finished writing the album’s last song, “Head Out,” in December 2021, and four months later, recorded the album in just two days. The 12-song collection is subtle and cool, meandering like a warm, sparkling country river through a backwoods county. The arrangements feel spacious and distinctly Western—Miller’s guitar lines are clean and clear and dripped with just the right level of reverb, trem, and chorus, while Jay Bellerose’s brush-led percussion trots alongside like a trusty steed.
The Battle of Hotspur has a live feel, and that aspect was 100-percent deliberate. Miller says, “That’s the exact intention of our records—we want to create a record that we can play live. Jason Wormer, the recording and mixing engineer that did our record, came to a show of ours and was like, ‘This is incredible.’ He’s recorded so many records and was like, ‘This is the first time I’ve ever recorded a record that sounds the same live.’ And that was our exact intention. Because I feel like [the goal of] the trio itself was to be full. It’s not supposed to be like, ‘Oh, let’s put saxophone and let’s put keys and other guitars on it.’ The concept of the record is a full trio like the way Booker T. & the M.G.’s were. It’s not, ‘Wouldn’t it be cool if you added another instrument?’ No, we’re an instrumental trio.”
Musicality is what separates Miller from the rest of the pack. She has prodigious chops but uses them appropriately, when it makes musical sense, and her ability to honor a song’s written melody and bring it to life is one of her strong suits. “That’s a huge part of what we do,” she says. “The concept of the Molly Miller Trio—and also a part of my playing—is we are playing songs, we are bringing back the instrumental, we are thinking about the arrangement. The solo is a vehicle to further the story, to further the song, not just for me to shred. So often, you play a song, and you could be playing the solo over any song. There’s not enough time spent talking about how to play a melody convincingly, and then play a solo that’s connected to the melody.... Whether it’s a pop song, an original, or a standard, how you’re playing it is everything, and not just how you’re shredding over it.”
Miller still gets pigeonholed by expectations in the music industry, including the assumption that she’s a singer-songwriter: “I don’t sing. I’m a fucking guitar player.”
Photo by Anna Azarov
Miller’s strong sense of melody can be traced to her diverse palette of influences. Even though she’s a “jazzer” by definition, she’ll cover pop songs like the Everly Brothers’ “All I Have to Do is Dream” and the Rolling Stones’ “(I Can’t Get No) Satisfaction.” Miller says, “I spent nine years in jazz school. I practice ‘Giant Steps’ still for fun because I think it’s good for my guitar playing. But it was a release to be like, ‘I am not just a jazz guitar player at all!’ Why do I love the guitar? Because I discovered Jimi Hendrix, right? What made me feel things in high school? Bob Dylan, Jimi Hendrix, and No Doubt. It’s like, Grant Green’s not why I play the guitar.
“I play jazz guitar, but I’m a guitar player that loves jazz. What do I put on my playlist? It’s not like I just listen to Wes Montgomery. I go from Wes Montgomery to the Beach Boys to freakin’ Big Thief to Bob Dylan to Dave Brubeck. The musicians I love are people who tell stories and have something to say—Brian Wilson, Cat Stevens.... They’re amazing songwriters.”
“Whether it’s a pop song, an original, or a standard, how you’re playing it is everything, and not just how you’re shredding over it.”
Despite a successful career, Miller continually faces sexism in the industry. “I went to a guitar hang two days ago. It was a big company, and they invited me to come and check out guitars. And I’m playing—I clearly know how to play the instrument—and this photographer there is like, ‘Oh, so are you a singer?’ And I’m just like, ‘No, I don’t sing. Fuck you,’” recalls Miller. “It’s such an internal struggle because of the interactions I have with the world. This kind of gets this thing in me where I feel like I need to prove to people, like, I am a guitar player. And at this point, I know I’m established enough. I play the guitar, and I know how to play it. I’m good, whatever. There still is this ego portion that I’m constantly fighting, and it comes from random people walking up to me and asking about me playing acoustic guitar and my singer-songwriter career or whatever. And I’m like, ‘I don’t sing. I’m a fucking guitar player.’”
YouTube It
Molly Miller gets to both tour with and open up for Jason Mraz’s band. Here’s a taste of Miller leading into Mraz’s set with some adeptly and intuitively performed riffs from a show in July 2022.
Stompboxtober Day 29 is live! Enter today to win a pedal from StewMac—more chances to win tomorrow!
StewMac International House of Overdrive Pedal Kit, With Bare Enclosure
The IHOO is based on the Crowther Hot Cake, an overdrive that became available around 1976. It was one of the earliest hand-made boutique effects pedals available. The circuit was designed to be what is now referred to as a “transparent” overdrive. An effect that enhances the player's sound while keeping the original tone intact.
This circuit has undergone many changes since its inception, and we have further expanded on the design by returning to an earlier version most revered by players and removing the buffer, which resulted in a reworked circuit that is true bypass but still retains the charm of the design.
We also include the original LM741 IC chip found in the originals, as well as the TL071 that is found in later versions so you can experiment with which IC best suits your playing style.
When his brother-in-law passed away, this reader made it his mission to repair his old damaged Ovation guitar as a gift to his niece.
My brother-in-law passed away in March. He was a talented keyboardist and, in his heyday, played in bands that toured internationally. As a musician, he naturally had a guitar—a 1974 Ovation—and a “friend” put an unauthorized abstract paint job on it. That guitar had an extremely hard life: Its top was broken and the frets were completely worn out. As an aspiring luthier, I took the guitar to repair it then pass it on to his daughter. This proved to be a challenging task as I had never done anything more complicated than a basic setup before and I had few luthier tools.
A heat gun and thin spatula knife worked fine to remove the top and the bridge. I did my best to glue the new top halves together—but that left a visible seam, so I put a herringbone center strip over it (to match the purfling I would install later). I had no radius board, so I just clamped the pre-radiused braces I bought and was quite pleased that the new top did have a radius! Once I felt the bridge was sanded perfectly, I glued it down. I then replaced the plastic nut and saddle with bone. A hot soldering iron got the old frets out without damaging the fingerboard. (That said, next time I will clean those slots out better before installing new frets!)
“This proved to be a challenging task as I had never done anything more complicated than a basic setup before and I had few luthier tools.”
I was happy with my progress until I started routing the purfling channel. I had no workbench, and the concave Ovation body made things a bit awkward. While basically “bear hugging” the body with one arm and holding the router with the other, I heard a faint “pop.” The edge of an X-brace had come loose. I was able to squirt glue into the void with a syringe, but the concave guitar body made a brace jack useless (without fabricating a complicated caul). I removed the phono jack and jammed a pencil into the brace, keeping pressure on it with a rubber band. It worked!
Neil gave the Ovation a new lease on life with his extensive repairs, the end result of which can be seen here.
I also learned the importance of channel depth with purfling—I did lots of scraping to get everything flush. I am pleased with the finished product and my niece is so happy! I also put a new label inside the guitar body, with a dedication to her father on it.
Overall, there are multiple wins on this project. I gave tribute to my brother-in-law, made his daughter happy, and learned enough to build a guitar from scratch.
Our columnist links a few memories together to lead us to another obscure guitar model—one he remembers from his childhood and came to acquire as an adult.
Do you have any “click and stick” movies that you love? Like when you are channel surfing and see a movie that you’ve watched a lot, and then just watch it again? Lately, for me, it’s been the 2015 movie The Revenant. It’s a truly brutal tale of survival set in 1820s frontier America. My gosh, that movie just draws me in every time. There’s one scene where the main character goes flying off a cliff while riding a horse! He just sort of falls/rolls through a pine tree and lands in the snow … and he still survives! It’s crazy!
It makes me think about an old childhood friend who lived up the street from me. Jerry and his parents lived in an old house on their grandparents’ large plot of land. On one part of the land there was an old orchard filled with all types of fruit trees and pines, and I remember how we would climb to the top of the pines and just roll ourselves down the side, Revenant style! If you fell the right way, the branches would kind of gently let you down to the next, but if you hit it wrong and got in between the branches, you’d be wrecked. It’s like we enjoyed getting hurt, and, of course, when you’re young, you can snap right back. Ah, the days when pain really didn’t hurt. Now I wake up with injuries, for real.
“The action was way high and the fret ends were sharp. It was basically a painful affair.”
So why am I talking about my click-and-stick movie and stupid childhood escapades? Well, let’s get back to memories of my old friend Jerry. First, the house he lived in was so old that it had real wooden siding, but it hadn’t been painted in forever so the exterior took on a worn, faded, haunted house vibe. Second, his carpet was so tattered that it was being held together with duct tape. Lastly, I remember his dad had a cool, old electric guitar in the living room. His dad would let me play it sometimes, and I remember that it actually hurt to play! The action was way high and the fret ends were sharp. It was basically a painful affair. Not falling-out-of-a-tree painful, but as bad as it comes with guitars. It had the label “Conrad,” and young Frank didn’t realize that he’d be looking for that guitar again one day. I mean, it did have four pickups and lots of knobs and switches!
Made at the old Japanese Matsumoko factory in the ’60s, this Conrad Bison 1233 has four pickups and a 27" scale.
Years later, I would discover that his was a Conrad Bison guitar. The model came in a few different configurations, but the four-pickup design was designated as the 1233. Primarily featuring a lovely sunburst, these Bisons were made at the amazing old Matsumoku factory in Japan and were imported by the David Wexler Company that was based in Chicago. Matsumoku always had a good supply of aged wood, and many of the guitars made there are resonant and built well. The Bisons first appeared around 1966 and had a rather good run into the early ’70s.
Simple volume/tone knobs are paired with preset solo/rhythm switches that power alnico magnets. There’s an on/off switch for each pickup, and the sound really covers all the bases. Thumpy lows and crisp highs are all there. And, the pickups handle fuzz and distortion with ease. The Bisons also came in one- and two-pickup configurations with a normal scale, but the four-pickup ones have a longer, 27" scale, which is common for Matsumoku-made electrics.
So there it is: pain, survival, American frontier, Bison, haunted houses. It all sticks together like a duct-taped carpet. Click and stick, baby!
A 1000-watt speaker cabinet crafted for musicians who demand power and precision. Sunn Amps intends to reinvent the standard 4x12 configuration with the introduction of this new cabinet.
The Sunn Amps DoomBox is built to accommodate both guitar and bass, offering an impressive 1000-watt handling capacity—making it the first commercially available 4x12 cabinet with such high power handling. With four specially designed 12” drivers rated at 250 watts each, this cabinet provides clean, unrestrained sound levels that can maintain power integrity across all frequencies, ideal for high-volume performances.
Inspired and developed using feedback from artists and bands who rely on the depth of lower tunings and high volume genres, the DoomBox was engineered to meet the unique demands of professional musicians looking for a robust, high-efficiency cab that can translate the raw power of their sound without compromise.
Premium Craftsmanship and Materials
The Doom Box cabinet is crafted from solid finger-jointed Baltic Birch plywood, ensuring both durability and tonal clarity. Each cabinet is constructed by hand in the U.S.A. using original 1930s machinery, the DoomBox reflects Sunn’s historic commitment to quality, contrasting with some of the mass-produced, MDF-based cabinets on the market today. The cabinet’s aluminum basket, ferrite magnet, and custom Sunn weave Tolex with a custom grill design complete its professional-grade build.
Technical Specifications:
• Power Handling: 1000W
• Inputs: 1 x ¼”
• Impedance: 8 Ohm
• Drivers: 4 x Sunn 12S250
• Construction: Marine Grade Baltic Birch
• Dimensions: 29.25” X 30” X 14”
• Weight: 107 lbs
• Price: $2399.00
With clear low-end punch, even sound response, and ample air movement, the Doom Box ensures that every note reaches the audience with clarity and power. This cabinet is a game-changer for musicians who need high-performance, road-ready equipment that enhances their unique sound.