
Superb preamp and drive tones combine in a bass utility knife that’s built to last.
Versatile as preamp or overdrive. Built like a tank and feels indestructible. Quiet operation. Very easy to dial in sounds.
Slightly heavy. Could benefit from an XLR out.
$319
Origin Effects Bass DCX
origineffects.com
Origin Effects grabbed the attention of the bass community when they launched their Cali76 compressor, which is now widely acknowledged as an industry standard. Last year the company made another splash among bass players with the release of their BASSRIG Super Vintage and BASSRIG ’64 Black Panel pedals—recreating vintage tube bass tones with impressive accuracy. In a time when much of the musical instrument industry is going digital and embracing the potential of programmability and lighter, more compact products, Origin’s offerings remain stubbornly analog and vintage in look and feel. That’s certainly the case with the DCX Bass, a preamp that’s inspired by the legendary Universal Audio 610 recording console. Though some brave manufacturers admirably emulate the UA 610 in digital form, Origin didn’t seek to imitate the 610 down to the last detail. Instead, they used the 610 as a jumping-off point to create this preamp, EQ, and drive optimized for bass.
A Preamp of Many Hats
Like the UA 610 preamp, the DCX Bass adds color to a signal as well as precise control over level and EQ. It also enhances playing dynamics. Like many other Origin pedals, the DCX Bass is both simple and feature-rich. Four knobs regulate output level, drive, and low-frequency and high-frequency bands, and between those controls you’ll find two switches. A mode switch changes the function of the pedal from EQ mode to overdrive mode. The voice switch lets the user choose from dark, flat, and medium settings. It’s pretty straightforward on the surface. But when you plug in you realize the options and combinations add up to much more than meets the eye.
Cleaning Up in the Studio
Most bass players are accustomed to using straight-to-console tones without effects. But that rarely means your signal sees just a DI. There is almost always some compression and a slight, barely audible harmonic saturation from the desk that makes the low end sound magical. In my own studio work, I use this sound 80 to 90 percent of the time, so I’m pretty used to the way a good board preamp affects my basic tone. Eager to hear how the DCX approximated that sound, I plugged in a Yamaha bass with just a P-style pickup engaged, put the pedal in EQ mode, the voice switch in dark mode, set the drive at 11 o’clock, and both EQ controls at 2 o’clock.
“With the drive knob all the way up and the voice switch set to flat, I was rewarded with a thick overdrive tone with pronounced upper transients that are not at all harsh.”
In this setting, the DCX Bass added perceptible extra warmth. I didn’t hear extra low end, exactly, but I sensed a slower attack that made the bass feel just a little bigger and a bit more like clean ’70s direct tones. When I was moving across the frets on a bass with fresh strings, the fret noises sounded slightly more musical and less harsh—something I always appreciate in tube-driven studio gear. I was very pleased to feel that same sensation from a non-tube-equipped pedal.
Through the Gearbox, Into Overdrive
Flipping the mode switch over to OD transforms the DCX Bass into a roaring rock monster. With the drive knob all the way up and the voice switch set flat, I heard thick overdrive tone with pronounced upper transients that were not at all harsh. And even though the pedal doesn’t have a blend control, the low end remains solid when you use the pedal as a pure drive. To my ears, the drive tone lands squarely in the middle between a darker fuzz and a very bright distortion, like you might hear from Billy Sheehan. When I ran this extreme setting through an amp at a show, it just sounded gloriously like vintage indie rock, and my bandmates shot me smiles of approval.
Middle Ground
One task that can be difficult for many bass overdrives is generating a convincing “barely there,” kind of low-gain drive—the feeling that you get when 10" speakers are just starting to break up a little. I use this tone frequently. And by picking an Epiphone Viola Bass with flatwounds, I got it by switching the mode back to EQ, reducing the drive, and boosting the high frequency to give extra life to the flatwound tone. A palm-muted groove helped generate just the right amount of subtle dirt on the attack. In some ways, it’s the kind of tonality that can be felt by a player as much as heard. It guides you into different playing spaces, and it both sounds and feels great.
The Verdict
Origin’s DCX Bass is supremely usable in a day-to-day, professional playing environment. It’s quiet and free of extraneous noise. Even the most extreme settings never feel exaggerated or redundant, and the clean, warm sounds can make you play like you’re riding in the bench seat of an old Cadillac, going on a slow Sunday drive, without a care for who is behind you honking. The construction inspires confidence and roadworthiness. And whether you decide to use it as an always-on preamp or an engage-when-needed drive pedal, it is a capable tone-shaping piece—especially in a live setting, where rackmount, vintage studio gear is not an option.
- Origin Effects RevivalDRIVE Review ›
- Bass Pedal Wars ›
- Bass Pedals: Basic to Playhouse ›
- 10 Affordable Bass Preamps - Premier Guitar ›
PG contributor Tom Butwin reveals his favorite songwriting secret weapon: the partial capo. Watch how the Shubb C7 and C8 can simulate alternate tunings without retuning your guitar—and spark fresh creative ideas instantly.
Shubb C8b Partial Capo for Drop-D Tuning - Brass
The C8 covers five of the six strings, leaving either the low E or high E string open, depending on how it's positioned.
- Standard setup: Placed on the 2nd fret while leaving the low E string open, it simulates Drop D-style sounds—except you're still in standard tuning (key of E). You get that big, droning bass feel without retuning.
- Reverse setup: Flipping the capo allows the high E string to ring, giving you shimmering drones and new melodic options across familiar chord shapes.
- A flexible tool that lets you simulate alternate tunings and create rich sonic textures—all while keeping your guitar in standard tuning.
Shubb C7b Partial Capo for DADGAD Tuning - Brass
The C7 covers three of the six strings—either D, G, and B or A, D, and G—depending on how it's flipped.
- Typical setup (D, G, B): Creates an open A chord shape at the 2nd fret without needing your fingers. This frees you up for new voicings and droning notes in the key of A.
- Reversed setup (A, D, G): Gets you close to a DADGAD-style tuning vibe, but still keeps you in standard tuning—great for modal, spacious textures often found in folk or cinematic guitar parts.
Use it alone or stack it with the C8 for wild, layered effects and truly out-of-the-box inspiration.
The Future Impact V4 is an incredibly versatile pedal with an exceptional range of sounds. In addition to producing synthesizer sounds such as basses, leads and pads, it can function as an octaver, chorus, flanger, phaser, distortion, envelope filter, traditional wah-wah, tremolo, reverb, etc., and even has a built-in tuner. It can potentially replace an entire pedalboard of dedicated single-effect pedals.
The very powerful signal processor of the Future Impact V4 is able to replicate the various oscillator, filter, amplifier and envelope generator blocks found in classic synthesizers. In addition, it contains signal processing blocks more traditionally used for processing the sound of an instrument such as a harmonizer block and audio effects such as chorus, distortion and EQ. These architectures complement each other in a very flexible way.
Setting the standard for the bass guitar synth pedals since 2015, together with an enthusiastic community and long line of great artists, the Future Impact V4 is the guitar synth platform for the next decade.
Belltone Guitars has partnered Brickhouse Toneworks to create a one-of-a-kind, truly noiseless Strat/Tele-tone pickup in a standard Filter’Tron size format: the Single-Bell pickup.
The Single-Bell by Brickhouse Toneworks delivers bonafide single-coil Strat and Tele tones with the power of a P-90 and no 60-cycle hum. Unlike typical stacked hum-cancelling designs, Brickhouse Toneworks uses a proprietary ‘sidewind’ approach that cancels the 60-cycle hum without sacrificing any of the dynamics or top-end sparkle of a Fender-style single coil.
Get the best of both worlds with clear bell-like tones on the neck pickup, signature quack when combining the neck and bridge pickups, and pristine twang in the bridge position backed with the fullness and power of a P-90. Push these into overdrive and experience the hallmark blues tone with plenty of grit and harmonic sustain — all with completely noiseless performance.
Key Features of the Single-Bell:
- Cast Alnico 5 Magnet, designed to be used with 500k pots
- Voiced to capture that signature Fender-style single coil tone without the 60-cycle hum
- Lightly potted to minimize squeal
- Made in the USA with premium quality materials
The retail price for a Bridge and Neck matching set is $340.00 and they’re available directly and exclusively through Belltone® Guitars / Brickhouse Toneworks at belltoneguitars.com.
Designed for players who demand flexibility without sacrificing tone, the Aquanaut fuses the rich warmth of classic analog delay with the extended range and clarity of modern digital designs. Featuring up to 600 milliseconds of delay time, the Aquanaut easily covers everything from tight slapback echoes to lush, ambient textures and rhythmic soundscapes – all with a simple, intuitive control layout.
Unlike many digital delays that can sound sterile and detached, the Aquanaut retains an organic, analog-inspired voice. Repeats are smooth and musical, gently fading into the mix to create depth and dimension without overwhelming your dry signal. Whether you’re chasing vintage tape echo, adding subtle space to your solos, or building massive atmospheric layers, the Aquanaut keeps your tone clear, present, and inspiring.
Berserker Electronics Aquanaut Delay/Echo
Key features include:
- Up to 600ms of delay time for expanded creative possibilities
- Analog-voiced digital architecture for warm, natural-sounding repeats
- Ambient-style echo that enhances, not distracts from, your core tone
- Simple, intuitive controls for delay time, feedback, and blend
The Aquanaut is available direct at www.berserkerpedals.com and Reverb at a $149 street price.