Good Vibes
A hallmark of Ronson’s style is his unique vibrato, which could be so wide that at times it almost sounded more like a series of quick bends. But its quirkiness fit right in with the glam sensibility, and it always came across as musical. Ronson is possibly most well known for being a member of David Bowie’s backing band, the Spiders from Mars, and his outro solo in Bowie’s “Moonage Daydream” from the classic album Ziggy Stardust is a prime example of his unique vibrato.
Let’s look at Ex. 1, which puts the spotlight on a Ronson-style exaggerated vibrato coupled with bent notes. This can be a challenging technique, and the best way to execute it successfully is by starting with the traditional rock-style fretting-hand grip. With your fretting-hand thumb over the neck, rest the area between your thumb and index finger on the underside of the neck, creating a fulcrum point. Once you’ve bent the string, quickly rotate your wrist back and forth. Be sure not to push the string with your fingers, as this won’t provide as much strength and control as your wrist.
To fully emulate Ronson, be sure to bring swagger and confidence, like he always did. He brought a next-level intensity to Bowie’s shows, as evidenced by the following video. Witness the havoc he wreaks with his delay at 3:54.
Bending Melodies
Ronson had a particularly keen sense of melody and could create interesting melodic lines to fit over both simple and more complex chord progressions. A great example is his hypnotic guitar melody in Bowie’s “Suffragette City,” also from Ziggy Stardust.
To execute the entire melody, Ronson never once moves his fretting hand. He simply manipulates a single note by bending it varying degrees to fit over the chords. As far as technique, it’s best to use the same approach here as we did with vibrato, so as to have the most control over your bends. From a compositional standpoint, it can be helpful to be aware of the chord tones available, especially when dealing with a bit of an odd progression, like the one in Ex. 2. Here, the chord progression is: G (G–B–D), A (A–C#–E), G#m (G#–B–D#). We can think of this as IV–V–#IVm in the key of D (D–E–F#–G–A–B–C#) with the G#m chord being an odd, out-of-key choice. Looking at the chord tones, all are diatonic (in the key), with the exception of the G# and D# of the G#m chord.
Let’s take a look at two approaches to creating a melody similar to Ronson’s—one with not very much movement—over this sort of chord progression. First, when confronted with an out-of-key chord, such as our G#m, one approach is stress a note or notes which are out of key, as this can create an element of surprise. In measure three, the melody moves to D#, the fifth of G#m, which is out of key and works well here.
However, sometimes this approach can be jarring to the listener. The underlying chord is already out of key, and stressing one of the non-diatonic notes can prove to be a bit too much. In this case, a better choice is to find a note within the key which fits over the out-of-key chord. Now, this doesn’t have to be a chord tone, but here, the third of G#m (B), which is diatonic to our key of D can sound great, as demonstrated by this melody with almost no movement at all (Ex. 3). Note that for the G chord, the first note of the pair (B, the third) is a chord tone, whereas the second note (C#, the raised fourth) is not. It’s just the opposite for A chord: B is the second and C# is the third. After all, you don’t want to create cookie-cutter melodies, limiting yourself to chord tones alone. Always trust your ears and dare to try all sorts of options. But being aware of the chord tones can guide you through some tricky terrain.
Targeting the Third
In his work with Ian Hunter (Mott the Hoople), Ronson was sometimes called upon to dig into his bag of more traditional rock licks, but he always seemed to work his keen melodic sense into the mix as well. A great example is this live version of Hunter’s “Once Bitten, Twice Shy” from his 1975 self-titled debut solo album. Most rockers of the day would have leaned heavily on G minor pentatonic (G–Bb-C-D-F) over this common rock progression (C–G–D), but Ronson takes a different approach, mixing straight-up rock ’n’ roll with creative melody-making.
Ex. 4 takes a similar approach to the identical chords, starting with a classic Chuck Berry lick, then veering into more melodic territory by using the G major scale (G–A–B–C–D–E–F#). Stressing the thirds of the G and D chords (B and D, respectively) creates a sweet-sounding contrast to the more bombastic musical background.
Let’s try this “targeting thirds” approach with a different set of chords, as in Ex. 5. Here, we’re in the key of D, and over the chord progression D–F–G, we’re going to target the third of each chord — F#, A, and B, respectively. Stressing the third will often result in satisfying melodies, though doing it too much will have your listeners feeling as if they’ve eaten too much candy. Also, note how the F chord (bIII) functions as a non-diatonic bridge from the I chord (D) to the IV chord (G). Choosing to play its third (A) is another example of how stressing an in-key note over an out-of-key chord can yield smooth melodies.
Classical Gas
During his time with Bowie, Ronson could never quite be sure what musical setting he’d find himself in. “Time,” from Bowie’s 1973 release Aladdin Sane is a song with shades of Baroque music (think Bach), and in his solo, Ronson seamlessly adds lines that sound as if they could easily have been played by a classical trumpeter. First, enjoy David Bowie in his theatrically androgynous glory, as Ronson’s guitar emerges from behind his vocal. (Stay with it through the 4:00 mark!)
How does he accomplish this? He clearly draws from his classical music studies, but interestingly enough, it’s not about the notes as much as it stems from the rhythms he chooses. Ex. 6 showcases simple lines, all within the key of C (C–D–E–F–G–A–B), relying on mostly steady eighth- or 16th-note rhythms to lend a strict classical feel. As they often do, the details matter here: For example, notes with a dot above are to played staccato, or short. To accomplish this, after striking the note, quickly lift your finger so it rests on the string, thereby deadening it. Incorporating this sort of articulation and the quick 32nd-note flourish in measure one, along with rock-style vibrato and the sly bend in measure four creates a mix of modern and classical flair that Ronson could effortlessly summon.
Nothing Fancy Required
Aside from occasional use of delay, Ronson plugged his trusty 1968 Gibson Les Paul directly into various amps, most often a Marshall Major 200-watt head. Always with an eye toward detail, he had the finish stripped from his guitar, as he felt it gave the instrument more resonance. Armed with his vast musical experience and an equal ability to be subtle or unbridled, his playing remained unpredictable, as he loomed large over the glam rock scene. Let’s leave off with Ronson deftly weaving some melodic magic on the Bowie classic “Space Oddity,” of which the singer clearly approves.
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibson’s EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (It’s easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didn’t look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as you’re able to find today. “Why?” you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ’56), the Longhorn 4623 (’58), and the Shorthorn 3612 (’58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses “baritone guitars,” to add to our confusion today. But these vintage “baritones” were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the “tic-tac” bass sound of Nashville records produced by Chet Atkins, or the “click-bass” tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
“When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye.”
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button “Tone Selector Switch” that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
It’s sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
It’s sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? That’s because the model’s single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul ’Bursts. So as people repaired broken ’Bursts, converted other LPs to ’Bursts, or otherwise sought to give other Gibsons a “Golden Era” sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isn’t original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesn’t have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald City’s $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Bacon’s “Danelectro’s UB-2 and the Early Days of 6-String Basses” Reverb News article, Gruhn’s Guide to Vintage Guitars, Tom Wheeler’s American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmark—including delay time, feedback, and independent rate and depth knobs for the modulation—plus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ’80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.