
With its block inlays, neck binding, adjustable bridge, and basic control set, this Ibanez 2662 looks ready to rock.
This Ibanez 2662 is an appealing, two-humbucker copycat design of a Ronnie Wood signature Greco rarity.
If you were to thumb through an Ibanez catalog from 1975, you’d see exactly why this period for the company and other guitar builders in Japan is known as the “lawsuit era.”
The guitars that dot the catalog’s pages look an awful lot like Gibsons, Fenders, and Rickenbackers. And these lookalikes are not mere homages inspired by classic shapes. Ibanez’s offerings represent very specific models within other brands’ then-current lineups. For example, its Les Paul-style guitars represent sunburst Standards, Customs with split-diamond headstock inlays, and even a ’70s oddity—the Les Paul Recording model.
But in Ibanez’s Custom Series, you’d see some designs you can't place so easily, including the 2662. An example of this rarity is now listed for sale on Reverb by the Austria-based Gregor Svend, and serves as the focus of this month’s column.
The 2662’s tulip-shaped body has some similarities to other Ibanez 26XX-series guitars, like the Artist Series 2680s and 2681s built for the Grateful Dead’s Bob Weir, yet the horns are nearly flattened. (At first, it appeared to us to be an original design, but thanks to a hawk-eyed reader, we now know the 2662 is based on the Greco RW-700, a Ron Wood Signature released the year prior.)
“By the 1976 catalog, the 2662 had disappeared completely. What a short, strange trip it must’ve been.”
In Ibanez’ 1975 Custom Series leaflet, where the 2662 made its first appearance, only its bare specs are shared: 41.5" total length, 17" x 13.75" body, Super-Humbucking pickups, a rosewood fretboard on a set neck, pearloid inlays, a brown sunburst finish, and gold hardware, including Smooth Tuners tuning pegs, a chunky bridge, and that wonderfully unique tailpiece. The control layout features two volume knobs, two tones, and a 3-way pickup selector switch.
But unlike those aforementioned Weir models, the 2662 did not catch on—perhaps because Ibanez didn’t really give it a chance. In the 1975 catalog, there is no price listed for the 2662. (Other 26XX guitars then available ranged between $391 and $631, with the 2662 likely landing on the higher end.) And by the 1976 catalog, the 2662 had disappeared completely. What a short, strange trip it must’ve been.
The pickup selector location could be easy to access or in the way, depending on a player’s right-hand approach, but the trapeze-type tailpiece invites some extended techniques on such a trimmed-down solidbody.
Exactly how many 2662s were ordered and built is not known, though they don’t pop up for sale very often. We’ve only seen two hit our site, and the other was not branded as Ibanez but as Mann, a brand name for a Canadian importer of Ibanez guitars in the ’70s. Fans of the guitar speculate that only a handful of 2662s exist, though that rarity has not led to astronomical asking prices when they do show up on the vintage market. We've seen exactly one Greco RW-700 change hands on Reverb, for the equivalent of roughly £1,300 (or a little more than $1,500).
This particular 2662 was originally listed for €3,800, but at the time of this writing had been price-dropped to €2,600 (or about $2,800). That new asking price is in line with the fancier of the two Weir-associated models (1970s 2681s average around $2,700) and a little less than the roughly $3,200 buyers spend, on average, for the Ibanez 2837CT, a korina V-style unveiled alongside the 2662 in Ibanez’s 1975 Custom Series.
Lawsuit-era guitars of all kinds seem to be getting more and more attractive to buyers, since they offer a relatively affordable entrypoint into the world of vintage guitar collecting. Can this column spark a revival for the obscure and cool 2662 (or, for that matter, the Greco RW-700)?
If a lawsuit-era guitar can command such interest, we wonder: Can this column help spark a revival for this obscure and cool Japanese original?
Sources: Ibanez catalogs from 1975 and 1976, Reverb listings, and Price Guide sales data.
- Ibanez Unveils Revamped Polyphia Signature Guitars ›
- Ibanez "Lawsuit Era" Les Paul Custom Copy ›
- Ibanez Unveils New 2023 Guitars ›
- Ibanez SML721 Electric Guitar Review - Premier Guitar ›
- Trashy-Sounding ’60s Greco 912 Guitar’s Garage-Rock Magic - Premier Guitar ›
Few musical acts did more to put their fame and fortune to good use than punk rock icon Wayne Kramer. Known for his enduring commitment to activism, especially in justice reform, his life story embodies the defiant, DIY ethos of punk, directly inspiring generations of bands and musicians who followed. Now, fans and fellow musicians alike can attempt to emulate Kramer’s incendiary sound with the new, limited-edition pedal.
Designed before his death in February 2024, Wayne Kramer—together with friend Jimi Dunlop (Dunlop CEO) and Daredevil Pedals owner Johnny Wator —the pedal features artwork from artist and activist Shepard Fairey (Obey Clothing founder). A majority of profits from the sale of the pedal goes directly to Kramer’s charity supporting the rehabilitation of incarcerated people of all ages, genders, and backgrounds.
In honor of his close friend, Tom Morello—the innovative guitarist behind Rage Against the Machine, Audioslave, the Nightwatchman, and more—demoed the pedal, showcasing its sound and shining light on Wayne Kramer’s incredible legacy.
Tom Morello Introduces MC5 Wayne Kramer-Inspired Pedal For Charity: MXR Jail Guitar Doors Drive
"What they've tried to bake into the MXR® Jail Guitar Doors Drive distortion pedal is not just Wayne's sound but Wayne's attitude, and the grit and the rawness of Detroit and of the MC5," said Morello, one of Kramer’s best friends, during his demo of the pedal. "This is the guitar pedal that was used on the song 'Heavy Lifting' that I recorded with Wayne for the last MC5 record.
"Named after the late rocker's charity—which provides instruments and art workshops to incarcerated individuals as rehabilitation tools—the MXR® Jail Guitar Doors Drive pedal aims to capture all of the high-voltage energy of Wayne Kramer's sound. It features two uniquely voiced gain circuits cascaded together with a singular pot controlling both the output level of each circuit and the overall saturation level of the distortion.
Music makers looking to capture Kramer’s raw, fiery sound can pick up the new MXR® Jail Guitar Doors Drive pedal, exclusively on Reverb via The Official MXR Jail Guitar Doors Drive Reverb Shop for $199, here: https://reverb.com/shop/the-official-mxr-jail-guitar-doors-reverb-shop.
PG contributor Tom Butwin reveals his favorite songwriting secret weapon: the partial capo. Watch how the Shubb C7 and C8 can simulate alternate tunings without retuning your guitar—and spark fresh creative ideas instantly.
Shubb C8b Partial Capo for Drop-D Tuning - Brass
The C8 covers five of the six strings, leaving either the low E or high E string open, depending on how it's positioned.
- Standard setup: Placed on the 2nd fret while leaving the low E string open, it simulates Drop D-style sounds—except you're still in standard tuning (key of E). You get that big, droning bass feel without retuning.
- Reverse setup: Flipping the capo allows the high E string to ring, giving you shimmering drones and new melodic options across familiar chord shapes.
- A flexible tool that lets you simulate alternate tunings and create rich sonic textures—all while keeping your guitar in standard tuning.
Shubb C7b Partial Capo for DADGAD Tuning - Brass
The C7 covers three of the six strings—either D, G, and B or A, D, and G—depending on how it's flipped.
- Typical setup (D, G, B): Creates an open A chord shape at the 2nd fret without needing your fingers. This frees you up for new voicings and droning notes in the key of A.
- Reversed setup (A, D, G): Gets you close to a DADGAD-style tuning vibe, but still keeps you in standard tuning—great for modal, spacious textures often found in folk or cinematic guitar parts.
Use it alone or stack it with the C8 for wild, layered effects and truly out-of-the-box inspiration.
PRS Guitars celebrates 40 years with the limited edition McCarty SC56. Featuring vintage-inspired design and modern innovations, this single-cutaway guitar pays tribute to Ted McCarty and his impact on the industry. With only 400 pieces available, this instrument is a must-have for collectors and performers alike.
PRS Guitars today announced the 40th Anniversary McCarty SC56 Limited Edition. With a classic PRS single-cutaway body shape and carefully chosen specifications, the McCarty SC56 is both a tribute to tradition and a reliable tool for the modern performer. Only 400 pieces will be made.
“The SC56, signifying Singlecut and 1956, model is our most recent tribute to my late mentor Ted McCarty and his impact on the guitar industry. We started with our take on a classic late ‘50s singlecut body. 1956 marks the year that Ted first had guitars made with his newly coined 'humbucker' pickups. It also happens to be the year I was born. Bringing vintage design into the modern era, we loaded this model with our McCarty III pickups, meticulously designed to deliver warm, clear, vintage tone with exceptional note separation and dynamics,” said PRS Guitars Founder & Managing General Partner, Paul Reed Smith.
Anchored by a maple top and mahogany back, the 24.594” scale length and 22-fret Pattern Vintage neck work with Phase III non-locking tuners and PRS two-piece bridge to promote its musical sustain. The PRS McCarty III pickups are controlled by a simple layout — two volume controls, two tone controls, and a three-way toggle on the upper bout.
Single-cutaway guitars are known to be heavier than their double-cutaway counterparts. The McCarty SC56 Limited Edition design incorporates weight-relief, decreasing the weight of the guitar by about 2/3 of a pound, while maintaining several points of attachment between the guitar top and back to eliminate the “hollow” sound of the cavities and promote tone transfer.
With appointments like binding on the fretboard, classic bird inlays, and a vintage-inspired nitrocellulose finish, the 40th Anniversary McCarty SC56 Limited Edition blends heritage and innovation into a timeless instrument.
PRS Guitars continues its schedule of launching new products each month in 2025.
For more information, please visit prsguitars.com.
40th Anniversary McCarty SC56 Limited Edition | Demo | PRS Guitars - YouTube
The Future Impact V4 is an incredibly versatile pedal with an exceptional range of sounds. In addition to producing synthesizer sounds such as basses, leads and pads, it can function as an octaver, chorus, flanger, phaser, distortion, envelope filter, traditional wah-wah, tremolo, reverb, etc., and even has a built-in tuner. It can potentially replace an entire pedalboard of dedicated single-effect pedals.
The very powerful signal processor of the Future Impact V4 is able to replicate the various oscillator, filter, amplifier and envelope generator blocks found in classic synthesizers. In addition, it contains signal processing blocks more traditionally used for processing the sound of an instrument such as a harmonizer block and audio effects such as chorus, distortion and EQ. These architectures complement each other in a very flexible way.
Setting the standard for the bass guitar synth pedals since 2015, together with an enthusiastic community and long line of great artists, the Future Impact V4 is the guitar synth platform for the next decade.