![Idles Rig Rundown [2024]](https://www.premierguitar.com/media-library/youtube.jpg?id=54836554&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C0)
The Bristol bashers are back with an arsenal of new noisemakers on this updated Rundown.
Between 2016 and 2024, Bristol outfit IDLES have gone from being snarling, post-punk underdogs to being snarling, post-punk champions. Their debut LP, Brutalism, was an immediate hit, and since then they’ve turned out a string of full-length records that have expanded their creative vocabulary while increasing their popularity. It’s all come to a head this year with Tangk, their Grammy-nominated fifth album, which dropped in February.
Along the way, IDLES’ sound has mutated into experimental offshoots and outgrowths, so it’s little surprise that the rigs of guitarists Mark Bowen and Lee Kiernan, along with bassist Adam Devonshire, have done the same. While they still tour with some of the gear they showed off on our 2021 Rig Rundown, each player has fun new trinkets that contribute to their run of shows this year. But even with all the new toys, they keep an element of danger in the mix, and certain variables mean the set sounds different every night: “People come to see an IDLES show ’cause it almost falls apart all the time,” grins Bowen.
Brought to you by D’Addario.Bowen's Bari
Bowen had a baritone neck matched with this Dacota red Fender Stratocaster body. It’s got stock pickups, which split the difference between the twang of a Strat and the bassy tones of the bari. This one is tuned to either B standard or drop A#.
Triples Make It Safe
Bowen’s signal is blasted out via a trio of amplifiers: a Vox AC30, Orange AD200B MKIII, and a Hiwatt Custom 100. A Hiwatt and Orange cabinet duo lend different textures to the soundwaves.
Mark's Mothership
Bowen’s board setup is largely the same as he had in the 2021 Rig Rundown, but there are a few tweaks.
His primary guitar pedalboard remains mostly the same, with Death By Audio Reverberation Machine and Echo Dream 2, Adventure Audio Dream Reaper, Moog MF Delay and MF Ring, Death By Audio Waveformer Destroyer, Electro-Harmonix POG2, 4ms Pedals Mini Swash Full, Red Panda Particle and Raster, and a JHS Haunting Mids. His new tuner, though, is a Walrus Audio Canvas. It all still runs through a GigRig 3 switcher. Under the hood resides three signal sweeteners including an EQD Acapulco Gold and a pair of ZVEX boxes—a Lo-Fi Junky & Super Duper 2-in-1.
Next comes his modulation station, equipped with Moog’s Moogerfooger MF-107 FreqBox, MF-102 Ring Modulator, MF-108M Cluster Flux, and CP-251 Control Processor, in addition to another no-name glitch/synth device. The Electro-Harmonix 95000, Old Blood Noise Endeavors Minim, and EHX POG2 are still in the mix, but the Strymon TimeLine has been swapped for a Vongon Paragraphs. An Akai MPC One+ helps with sampling, and a Sequential Prophet-5 synth ties it all together. A pair of Strymon Iridiums are hidden under the Moog units, which handle all the signals from this electric jungle—as well as signal from Jon Beavis’ drums! “It’s the tension between the space-age mad stuff and the AC/DC guitar,” says Bowen. “I want both”
A third board, beneath the modular materials, is loaded up to with three Mission Engineering EP-1 expression pedals, a Walrus Canvas Re-Amp, a Moose Electronics Dobsky Fuzz, a GigRig Three2One, and another GigRig G3.
Tape Measures
Lee Kiernan’s Fender 70th Anniversary Esquire has become his go-to, a very versatile guitar which he’s left unmodified—save for the gaffer tape, of course. Despite the presence of strap locks under the tape, Kiernan’s learned you can’t be too careful.
Jackson Shredder
Kiernan calls this Jackson Soloist “one of the best-playing guitars he’s ever felt.” Enough said.
Triples is Best
This time around, like Bowen, Kiernan is running a trio of amps: a Hiwatt DR88, Marshall 1987x, and Peavey Deuce, which still has the original, square-magnet Peavey speakers. (A backup 2x12, loaded with Eminence Swamp Thangs, is on-hand in case things go wonky.) At this point, shouldn’t he just get a Kemper? “Nope,” he responds shortly.
Have You Met Gary?
Kiernan’s board has many of the same stomps as last time, but it’s been configured into a double-decker layout rather than a sprawling, side-by-side affair, and the newest addition is the EarthQuaker Devices Gary, a distortion/fuzz combo he made with the Ohio effects company from the green side of their now-discontinued Gray Channel. Aside from his new buddy Gary, Kiernan runs a Boss TU-3S, EQD Tone Job, Red Panda Raster, Death By Audio Micro Dream and Reverberation Machine, Eventide H9 Harmonizer, Warm Audio Ringer Bringer, Boss DM-2w, EQD Organizer, Montreal Assembly Count to Five, Drolo Twin Peaks and Stamme[n], Death By Audio Interstellar Overdriver Deluxe, Boss PS-5, Moog MF Chorus, Xotic EP Booster, Intensive Care Audio Vena Cava Filter, EQD Data Corrupter, and GigRig Remote Loopy 2. A smaller separate board is home to a DigiTech Whammy, two Mission Engineering expression pedals, a third expression pedal for the Drolo Twin Peaks, and a Mission Engineering Expressionator.
Out of sight, Kiernan also has a EQD Acapulco Gold, and ZVEX Effects Instant Lo-Fi Junky and Super Duper 2-in-1.
(American) Ultra Mono
This Fender American Ultra Jazz bass was made specially for Adam Devonshire. He was stoked about this unique colorway, but wanted it paired with a thin C-profile neck. Fender made it happen, bolting it onto the body. Devonshire strings it with Rotosounds.
Lollapalooza Lincoln
When IDLES was in Chicago to play Lollapalooza, bass builders Serek invited him to check out their shop. After a few minutes with this Lincoln bass, Devonshire had put in an order.
Fane Versus Fullerton
Taking a 33-percent-less approach than his bandmates on 6-string guitar, Devonshire runs just two amps: a Hiwatt DR201 and a Fender Super Bassman.
Sweaty Stomps
Devonshire has a problem: He sweats a lot. That’s not a big problem if your job doesn’t involve standing over rare, expensive electronics while dripping liquid onto them. So, he’s got a big fear that he’ll flood his favorite effects.
That said, these are the ones he feels are worth the risk: a Boss TU-3W, GigRig QuarterMaster, Darkglass Electronics NSG and Microtubes B7K Ultra, EHX Pico POG, Death By Audio Fuzz War, Baltimore Sonic Research Institute FZZ, Moog MF Chorus, Source Audio Spectrum, two Strymon Flints, Tronographic Rusty Box, and Tech 21 SansAmp Programmable Bass Driver DI.
Shop Idles' Rig
Electro-Harmonix POG2 Polyphonic Octave Generator Pedal
Moog Moogerfooger MF-104M Analog Delay
Moog Moogerfooger MF-108M Cluster Flux
Electro-Harmonix 95000 Performance Loop Laboratory 6-Track Looper
Mission Engineering Expressionator
EarthQuaker Devices Acapulco Gold
Darkglass Microtubes B7K Ultra
Tech 21 SansAmp Programmable Bass Driver DI
Fender American Ultra Jazz Bass
EarthQuaker Devices Gary Automatic Pulse Width Modulation Fuzz/Overdrive Pedal
EarthQuaker Devices Tone Job V2 EQ and Boost Pedal
EarthQuaker Devices Organizer V2 Polyphonic Organ Emulator Pedal
EarthQuaker Devices Data Corrupter Harmonizing PLL Pedal
The exquisite BilT Brothers collaborative guitar: a Frank Brothers Ultra Light in BilT eggplant sparkleburst with Arcane 3x3 Gold Foil Humbuckers and loaded with a Caroline Custom Cannonball Distortion.
It was like any other random day at work: We had customers coming in, items shipping out, services on the bench. I was simultaneously working on a pedalboard for a customer and making plans with some vendors. I was on the phone with Brandon Darner of BilT Guitars when DHL dropped off our latest Frank Brothers guitar. Now, I’m never shy about talking up builds from any of our vendors. Spec’ing guitars for our shop, seeing their execution exceed my expectations, and then getting it into the hands of its new owner is one of my absolute favorite parts of my job. So, naturally I mentioned that we just got a new Frank Brothers in. Brandon told me how much he loved their stuff—sort of a “game recognizing game” kind of thing.
After we unboxed the guitar, I called Tim Frank to let him know how we continue to be impressed with their work and how much we loved the new arrival. I also mentioned Brandon had some very nice things to say about their work. Tim’s response was something like, “Oh wow! That’s really cool. Their stuff is amazing and we have a lot of respect for those guys.” At first, I thought he was just being polite, but I’ve gotten to know him pretty well. I knew that the compliment and sentiment was genuine and past the point of his wonderful Canadian pleasantness. One thing led to another, and I started a group text. Very quickly, they became friends. In fact, Brandon even ordered a Frank Brothers shortly after the introduction.
The Frank Brothers and BilT team, left to right: Tim Frank, Tim Thelen (BilT), Nick Frank, and Brandon Darner (BilT).
My last call of the day was to Philippe Herndon from Caroline Guitar Company. As we talked, he was glowing about the pedal building community and how friendly and collaborative it is, and obvious questions popped into my head: “Why aren’t guitar companies like that?” “Why can’t we do a collab guitar?”
Long story extremely short, with tons of excitement, I got Brandon and Tim on the phone and proposed the idea of doing a guitar together. Without hesitation, the response from both was “Hell yeah, let’s do it!” and it was time for us to spec it. We decided on a Frank Brothers Ultra Light. BilT would apply their world-class fit/finish as well as their signature effects treatment. I picked my favorite finish in the BilT repertoire called eggplant sparkleburst, selected Arcane 3x3 Gold Foil Humbuckers, and tapped Philippe on the shoulder to ask if he had any Custom Cannonball Distortions—the first pedal I bought from Caroline in 2013—that he could provide for the build, to which he happily obliged.
A year or so later, the BilT Brothers was born. Of course, it is exceptional beyond words and is a true testament to the results of these incredible companies working together to produce something truly remarkable. We decided, with custom shirts and all, to proudly debut our creation at Fretboard Summit in Chicago. The reaction from everyone exceeded our expectations and showed me that the level of mutual respect and admiration in this business can lead to phenomenal results.
This project has opened a lot of doors that I’m not sure anyone knew existed. For me, the most exciting part of all of this is the fact that, like the smaller pedal companies, there is an actual community here filled with like-minded, pure enthusiasts who also happen to be master craftsmen—and who truly geek out over each other’s work.
Never was this more evident than at the Wood Wire Volts show this January, where not only did the BilT and Frank Brothers crews travel and stay together, they were also often in deep chats with fellow luminaries Sacha Dunable (Dunable Guitars) and Carlos Lopez (Castedosa Guitars), discussing the trade, the work, and ideas for the future. If the vibe is any indicator, we can safely assume that while the BilT Brothers was, by all accounts, the first ever collab guitar of its kind, it will not be the last.
This entire experience is reminiscent of the DIY community ethos that I’ve clung to and has inspired me for most of my life. There is a cliché about the journey being greater than the destination, and while the destination in this case is one of the finest guitars I’ve ever laid my hands on, I’d have to say it holds true
