Rig Rundown: Idles
Watch chaotic co-pilots Mark Bowen and Lee Kiernan use five boards to create hip-hop beats, raging elephant sounds, and whatever “genk” is.
Do you hear that thunder? That’s the sound of strength in numbers. Specifically, it's the sound of four 100-watt stacks. (Actually, one is a 200-watt bass tube head.) Idles guitarists Mark Bowen and Lee Kiernan finally have the firepower to match their fury. (Original members singer/lyricist Joe Talbot, drummer Jon Beavis, and bassist Adam Devonshire fill out the band. Kiernan took over for guitarist Andy Stewart after 2015 EP Meat was released.)
For much of the 2010s, the bashers from Bristol played on anything and plugged into everything. Low-budget imports and solid-state combos were what they had and they made that work. They toiled around the U.K. sharpening their sneering tongue, quickening their sting, and focusing their vision. Doing so meant playing small rooms as much as possible. So the need and access for big, potent, top-shelf gear was unnecessary. That volatile energy, sensible setups, and Sten-gun attack anchored both 2017’s Brutalism and 2018’s Joy as an Act of Resistance.
The popularity in those releases opened doors to new tools and the time to explore fresh tones and approaches. When writing Ultra Mono, Bowen and Kiernan looked for sounds rather than riffs.
“The noise-making had to be thought of from the start,” Bowen told PG in 2020. “We basically created a sound palette first, and once we created a sound, that sound informed the riffs.”
And the most obnoxious sounds on Ultra Mono were intentional.
“When we were writing this album, we’d go to random guitar shops and ask them for the weirdest pedals they had,” adds Kiernan. “It may sound useless, but it still might touch you somehow. Every now and then, a pedal that does something really weird will kick you into gear.”
Using hip-hop beats as a North Star and often performing on their instruments as drummers, the duo unlocked a combination of heartless sounds for Ultra Mono that elevated Talbot’s heartfelt (and challenging) lyrics.
For the just-released Crawler, they continued exploring obtuse sounds. Some continued to be unusual to the masses and others were atypical for Idles. “Car Crash” is a disjointed, cold-war-siren-sounding, brooding banger. Considering its brash, bizarrely brilliant predecessor, it’s right in line. However, one track no one saw coming was “The Beachland Ballroom”—a bring-you-to-your knees soul song. The incessant brave exploration advances their brutal power, supports their menacing energy, and paints with broad colors to complement Talbot’s biting commentary and tales of personal troubles.
Touring ahead of 2021’s Crawler (now available), Idles’ Mark Bowen and Lee Kiernan invited PG to Nashville’s Cannery Ballroom for an extended gear chat before their sold-out show. Just ahead of soundcheck, Kiernan clarified his seemingly callous treatment of his Fenders, while Bowen establishes that his acrylic Electrical Guitar Company EG 500 is heavy to dance about onstage, but its “angry piano” sound makes it worth it. They explain why they need a collective of five pedalboards and 50+ stomps to cover guitar, bass, baritone, synth, inhuman sounds, and whatever they mean when they say “genk.” (In a 2020 interview with PG, Bowen described the term like this: “’Mr. Motivator’ is a good example: Lee makes this ‘genk’ noise that sounds like a hammer in a metal factory, and he plays that along with the drums, and that part really only occupies a frequency range around 1.2k to 2.3k—which is a large bandwidth, but it’s where the transients of the drums and the cymbals sit. That part really pops in that space.” Also, Bowen and Kiernan created a YouTube show called Genks during the pandemic, which focuses on effects. Even if you’re a minimalist, it’s worth a watch for the laughs.)
Big thanks to Idles tech Gavin Maxwell.
[Brought to you by D’Addario XPND Pedalboard: https://www.daddario.com/XPNDRR]
“It’s Not Carelessness, I Just Do What I Want with It”
To the outside observer, stacking your Fenders on the floor, using gaff tape as strap locks, and carrying on with broken knobs and missing switches may seem like a fool’s errand for Idles guitarist Lee Kiernan, but it’s all part of his master plan.
“Playing it however I want, or smashing it against an amp, or rubbing a microphone on it, is all a part of using the tool,” Kiernan explains. “It’s made of wood so when it breaks, you just glue it back together.”
Above you see Kiernan’s trifecta of trouble. A quick glance and you notice the shell-pink Mustang and yellow Strat have been severely simplified. (“Less parts mean less things to go wrong,” says Kiernan). Both of their stock wiring setups and pickups were removed. He had Bristol (UK) tech Steve Hawkers drop in custom-wound single-coils (“all bass and all treble”) and solder them straight to the output jack. (Kiernan admits that it was Steve’s first pickup wind.) The only control on either is a volume knob. (As Kiernan demonstrates in the Rig Rundown, the Mustang’s volume knob is hanging by a thread and used in conjunction with strong neck bends producing a howling-train-in-the-distance sound.) The Strat still has its tremolo arm because Kiernan loves ’80s hair metal and can indulge in a dive bomb or two.
The untouched American Professional II Tele gets stage time when the band performs songs off their brand-new album Crawler. Upon receiving the guitar, Kiernan was doing as guitarists do—plugged it in and started hearing what it had to say. He slid it into the neck position with the tone rolled all the way off and singer Joe Talbot heard his noodling and wondered what it was for. Kiernan said it was him just testing out the guitar, but the process led to Crawler’s “When the Lights Come On.”
“This guitar, within seconds of its life, ended up helping write a song,” recalls Kiernan. “It’s staying as it is. I’m not gonna change it.”
All the guitars use Ernie Ball Not Even Slinkys (.012–.056) and he assaults the strings with Dunlop Tortex Standard 1.14 mm purple picks.
Loud and Proud
When the band was playing smaller rooms and had no money, they opted for whatever shabby amps they could plug into (including Peavey Pacer and Marshall Valvestate combos). Solid-state or tube, it didn’t matter as long as it made racket. Now that they’re selling out large clubs and theaters, the boys from Bristol crave as much volume and headroom as possible.
Kiernan’s first flirt with a tube Marshall was when he encountered a late-1980s, 2-channel JCM800 2x12 combo he adored. While recording Ultra Mono, he used several amps, including a 2003 Marshall 100-watt Super Lead plexi reissue and a 2000s 100-watt Marshall JCM800 2203. So it made sense for the fall 2021 U.S. run that Kiernan requested the above 100-watt Marshall JCM800s. The one on the left is a 2013 Model 2203, while its counterpart on the right is a 1989 Lead Series Model 2210 (with master volume and reverb). (Kiernan mentions in the Rundown that in Europe they use the SLP and 1897x models.) Both Marshalls hit their own Hiwatt 2x12s that are loaded with Fane Ascension F70 creamback speakers.
Double the Fun
The time spent mentioning everything Kiernan does with these pedals is better served watching the Rundown, listening to Idles’ music, or attending one of their shows. But in doing our due diligence, here are the stomps that corrupt, challenge, and ravage his tone.
Starting with the top row on the right-side board, we have a Strymon Flint, Drolo Twin Peaks (tremolo), Drolo Stamme[n] (micro looper/glitch delay/tape machine/sustainer/reverb), Death By Audio Micro Dream (delay), and a Death By Audio Space Bender prototype (modulation). The bottom row is home to a DigiTech Whammy, Electro-Harmonix Synth9, Intensive Care Audio Vena Cava Filter (distortion with an auto-filter and ring modulation), Moog MF Ring, and a Boss TU-3 Chromatic Tuner. A GigRig ABY-BABY controls the amp offering phase control and isolation. The small black box labeled “in/out” was built by tech Gavin Maxwell so Kiernan could quickly test out a pedal without having to rip his setup apart.
The left-side board starts with a Mission Engineering EP-1 expression pedal, a Boss PS-6 Harmonist, an EarthQuaker Devices Data Corrupter, a Death By Audio Interstellar Overdriver Deluxe, and a Death By Audio Evil Filter. The top row starts with a quartet of EarthQuaker stomps—Organizer (polyphonic organ emulator), Arrows (preamp boost), Gray Channel (overdrive), and Tone Job (EQ/boost)—a Moog MF Chorus, and Death By Audio Reverberation Machine. A Jam Pedals TubeDreamer is sandwiched in between everything.
Smells Like Home
Mark Bowen’s longtime main cruiser was this 1972 Fender Stratocaster he affectionately calls “Stinky.” This well-loved Strat belonged to Bowen’s dad and was gifted to him years ago. In a 2020 interview with PG, Bowen had this to say about his foul-smelling friend: “Stinky’s action is horribly high and it’s a terrible guitar to play, but I just love it because it feels like a real punk-rock guitar. That guitar lives for me, in a way, so that it makes its way onto everything.”
Besides the action, another thing making this Strat a struggle to commandeer is the Ernie Ball Mammoth Slinkys (.012–.062) he puts on his guitars. He bludgeons his instruments with Dunlop Tortex Standard 1.14 mm (purple) picks.
The Angry Piano
While Bowen still tours with “Stinky,” his preferred weapon of choice right now is this Electrical Guitar Company EG 500. Speaking with PG last year, he had this to say about the acrylic beauty: “It’s so much louder than other guitars, and there’s this resonance to it that really fits in with my ethos and songwriting. It sounds like an angry piano. That guitar is capable of really horrible caustic sounds, but immediately switches over to making these weighty, thuddy doom-metal sounds.”
Stealth Bomber
For anything low, rumbly, and absolutely nasty, Bowen picks up this Electrical Guitar Company Standard baritone (borrowed from Mogwai’s Dominic Aitchison). He says the EG 500 pickups are hot, but the humbuckers made for their Standards are “terrifying.”
More Bass, Baby!
For Ultra Mono, Bowen used a transatlantic amp combination of Hiwatts and Fenders. As the band has progressed from that album, Bowen has drifted his sound deeper and lower into the bass and synth territory. Putting together Crawler, he enlisted an Orange AD200B MKIII, which now travels with him on the road. Still keeping things somewhat in the guitar spectrum, he pairs the bass head with a Hiwatt Custom 100 DR103 reissue. (If you zoom in, you can see the Hiwatt has the bass knob goosed.) It’s worth noting, up until the Nashville date, Bowen had already blown out six Hiwatts, but he claims to never be without one: “There’s just this weight, this thunk that’s there, they’re bright, and the headroom is unmatched.”
Ironically, the Hiwatt runs into a MAXWATT B115HN 1x15 bass cab while the AD200B crushes an Orange PPC212 guitar cab.
Bowen's Central Command
To accomplish all the fantastic and outrageous tones captured on Idles’ last two records, Bowen brings a whole cast of characters to accomplish that feat. His main board (stationed out front onstage by his microphone) features his “most standard” pedals: Death By Audio Reverberation Machine and Echo Dream 2, Adventure Audio Dream Reaper, a pair of Moogs (MF Delay and MF Ring), Death By Audio Waveformer Destroyer, Electro-Harmonix POG2, 4ms Pedals Mini Swash Full (fuzz/distortion/noise synth/self-oscillation/LFO craziness), a duo of Red Panda pedals (Particle and Raster), and a JHS Haunting Mids. A Boss TU-3W Waza Craft Chromatic Tuner keeps his guitars in check and a GigRig G3 organizes all the changes.
Mooger-Fooger Mark Bowen
Near his amps, Bowen has another batch of tone morphers. Up top he’s got a 4-pack of Moog Moogerfooger monsters—MF-107 FreqBox, MF-102 Ring Modulator, MF-108M Cluster Flux, and a CP-251 Control Processor—and another no-name glitch/synth device. Below those we have an Electro-Harmonix 95000 Stereo Looper, a Strymon TimeLine, an Electro-Harmonix POG2, and an Old Blood Noise Endeavors Minim (reverb/delay and reverse). Lastly, he has a Nord Electro 6D at his disposal. Everything is powered by GigRig Timelord power supplies, while two Strymon Iridiums handle cab emulations.
Final Destination
The last part of Bowen’s setup is this board under his keyboard/Moogerfooger workstation. Here, he has another GigRig G3 switcher, another Electro-Harmonix 95000 Stereo Looper, a GigRig Three2One (to help balance levels between instruments), and three Mission Engineering EP-1 expression pedals (controlling some of the effects in the previous photo).
- Idles—to the Max, on Ultra Mono! - Premier Guitar ›
- Best Albums of 2020 - Premier Guitar ›
- Power Trip: A Guide to Power Tubes and Their Signature Sounds ... ›
- Rig Rundown: Yungblud's Adam Warrington - Premier Guitar ›
- Idles Rig Rundown [2024]: Bristol Bashers' New Noisemakers - Premier Guitar ›
This legendary vintage rack unit will inspire you to think about effects with a new perspective.
When guitarists think of effects, we usually jump straight to stompboxes—they’re part of the culture! And besides, footswitches have real benefits when your hands are otherwise occupied. But real-time toggling isn’t always important. In the recording studio, where we’re often crafting sounds for each section of a song individually, there’s little reason to avoid rack gear and its possibilities. Enter the iconic Eventide H3000 (and its massive creative potential).
When it debuted in 1987, the H3000 was marketed as an “intelligent pitch-changer” that could generate stereo harmonies in a user-specified key. This was heady stuff in the ’80s! But while diatonic harmonizing grabbed the headlines, subtler uses of this pitch-shifter cemented its legacy. Patch 231 MICROPITCHSHIFT, for example, is a big reason the H3000 persists in racks everywhere. It’s essentially a pair of very short, single-repeat delays: The left side is pitched slightly up while the right side is pitched slightly down (default is ±9 cents). The resulting tripling/thickening effect has long been a mix-engineer staple for pop vocals, and it’s also my first call when I want a stereo chorus for guitar.
The second-gen H3000S, introduced the following year, cemented the device’s guitar bona fides. Early-adopter Steve Vai was such a proponent of the first edition that Eventide asked him to contribute 48 signature sounds for the new model (patches 700-747). Still-later revisions like the H3000B and H3000D/SE added even more functionality, but these days it’s not too important which model you have. Comprehensive EPROM chips containing every patch from all generations of H3000 (plus the later H3500) are readily available for a modest cost, and are a fairly straightforward install.
In addition to pitch-shifting, there are excellent modulation effects and reverbs (like patch 211 CANYON), plus presets inspired by other classic Eventide boxes, like the patch 513 INSTANT PHASER. A comprehensive accounting of the H3000’s capabilities would be tedious, but suffice to say that even the stock presets get deliciously far afield. There are pitch-shifting reverbs that sound like fever-dream ancestors of Strymon’s “shimmer” effect. There are backwards-guitar simulators, multiple extraterrestrial voices, peculiar foreshadows of the EarthQuaker Devices Arpanoid and Rainbow Machine (check out patch 208 BIZARRMONIZER), and even button-triggered Foley effects that require no input signal (including a siren, helicopter, tank, submarine, ocean waves, thunder, and wind). If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute. (Spin the big wheel and find out what you’ve won!)
“If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute.”
But there’s another, more pedestrian reason I tend to reach for the H3000 and its rackmount relatives in the studio: I like to do certain types of processing after the mic. It’s easy to overlook, but guitar speakers are signal processors in their own right. They roll off high and low end, they distort when pushed, and the cabinets in which they’re mounted introduce resonances. While this type of de facto processing often flatters the guitar itself, it isn’t always advantageous for effects.
Effects loops allow time-based effects to be placed after preamp distortion, but I like to go one further. By miking the amp first and then sending signal to effects in parallel, I can get full bandwidth from the airy reverbs and radical pitched-up effects the H3000 can offer—and I can get it in stereo, printed to its own track, allowing the wet/dry balance to be revisited later, if needed. If a sound needs to be reproduced live, that’s a problem for later. (Something evocative enough can usually be extracted from a pedal-form descendant like the Eventide H90.)
Like most vintage gear, the H3000 has some endearing quirks. Even as it knowingly preserves glitches from earlier Eventide harmonizers (patch 217 DUAL H910s), it betrays its age with a few idiosyncrasies of its own. Extreme pitch-shifting exhibits a lot of aliasing (think: bit-crusher sounds), and the analog Murata filter modules impart a hint of warmth that many plug-in versions don’t quite capture. (They also have a habit of leaking black goo all over the motherboard!) It’s all part of the charm of the unit, beloved by its adherents. (Well, maybe not the leaking goo!)
In 2025, many guitarists won’t be eager to care for what is essentially an expensive, cranky, decades-old computer. Even the excitement of occasional tantalum capacitor explosions is unlikely to win them over! Fortunately, some great software emulations exist—Eventide’s own plugin even models the behavior of the Murata filters. But hardware offers the full hands-on experience, so next time you spot an old H3000 in a rack somewhere—and you’ve got the time—fire it up, wait for the distinctive “click” of its relays, spin the knob, and start digging.
The luthier’s stash.
There is more to a guitar than just the details.
A guitar is not simply a collection of wood, wire, and metal—it is an act of faith. Faith that a slab of lumber can be coaxed to sing, and that magnets and copper wire can capture something as expansive as human emotion. While it’s comforting to think that tone can be calculated like a tax return, the truth is far messier. A guitar is a living argument between its components—an uneasy alliance of materials and craftsmanship. When it works, it’s glorious.
The Uncooperative Nature of Wood
For me it all starts with the wood. Not just the species, but the piece. Despite what spec sheets and tonewood debates would have you believe, no two boards are the same. One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.
Builders know this, which is why you’ll occasionally catch one tapping on a rough blank, head cocked like a bird listening. They’re not crazy. They’re hunting for a lively, responsive quality that makes the wood feel awake in your hands. But wood is less than half the battle. So many guitarists make the mistake of buying the lumber instead of the luthier.
Pickups: Magnetic Hopes and Dreams
The engine of the guitar, pickups are the part that allegedly defines the electric guitar’s voice. Sure, swapping pickups will alter the tonality, to use a color metaphor, but they can only translate what’s already there, and there’s little percentage in trying to wake the dead. Yet, pickups do matter. A PAF-style might offer more harmonic complexity, or an overwound single-coil may bring some extra snarl, but here’s the thing: Two pickups made to the same specs can still sound different. The wire tension, the winding pattern, or even the temperature on the assembly line that day all add tiny variables that the spec sheet doesn’t mention. Don’t even get me started about the unrepeatability of “hand-scatter winding,” unless you’re a compulsive gambler.
“One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.”
Wires, Caps, and Wishful Thinking
Inside the control cavity, the pots and capacitors await, quietly shaping your tone whether you notice them or not. A potentiometer swap can make your volume taper feel like an on/off switch or smooth as an aged Tennessee whiskey. A capacitor change can make or break the tone control’s usefulness. It’s subtle, but noticeable. The kind of detail that sends people down the rabbit hole of swapping $3 capacitors for $50 “vintage-spec” caps, just to see if they can “feel” the mojo of the 1950s.
Hardware: The Unsung Saboteur
Bridges, nuts, tuners, and tailpieces are occasionally credited for their sonic contributions, but they’re quietly running the show. A steel block reflects and resonates differently than a die-cast zinc or aluminum bridge. Sloppy threads on bridge studs can weigh in, just as plate-style bridges can couple firmly to the body. Tuning machines can influence not just tuning stability, but their weight can alter the way the headstock itself vibrates.
It’s All Connected
Then there’s the neck joint—the place where sustain goes to die. A tight neck pocket allows the energy to transfer efficiently. A sloppy fit? Some credit it for creating the infamous cluck and twang of Fender guitars, so pick your poison. One of the most important specs is scale length. A longer scale not only creates more string tension, it also requires the frets to be further apart. This changes the feel and the sound. A shorter scale seems to diminish bright overtones, accentuating the lows and mids. Scale length has a definite effect on where the neck joins the body and the position of the bridge, where compromises must be made in a guitar’s overall design. There are so many choices, and just as many opportunities to miss the mark. It’s like driving without a map unless you’ve been there before.
Alchemy, Not Arithmetic
At the end of the day, a guitar’s greatness doesn’t come from its spec sheet. It’s not about the wood species or the coil-wire gauge. It’s about how it all conspires to either soar or sink. Two guitars, built to identical specs, can feel like long-lost soulmates or total strangers. All of these factors are why mix-and-match mods are a long game that can eventually pay off. But that’s the mystery of it. You can’t build magic from a parts list. You can’t buy mojo by the pound. A guitar is more than the sum of its parts—it’s a sometimes unpredictable collaboration of materials, choices, and human touch. And sometimes, whether in the hands of an experienced builder or a dedicated tinkerer, it just works.
Two Iconic Titans of Rock & Metal Join Forces for a Can’t-Miss North American Trek
Tickets Available Starting Wednesday, April 16 with Artist Presales
General On Sale Begins Friday, April 18 at 10AM Local on LiveNation.com
This fall, shock rock legend Alice Cooper and heavy metal trailblazers Judas Priest will share the stage for an epic co-headlining tour across North America. Produced by Live Nation, the 22-city run kicks off September 16 at Mississippi Coast Coliseum in Biloxi, MS, and stops in Toronto, Phoenix, Los Angeles, and more before wrapping October 26 at The Cynthia Woods Mitchell Pavilion in The Woodlands, TX.
Coming off the second leg of their Invincible Shield Tour and the release of their celebrated 19th studio album, Judas Priest remains a dominant force in metal. Meanwhile, Alice Cooper, the godfather of theatrical rock, wraps up his "Too Close For Comfort" tour this summer, promoting his most recent "Road" album, and will have an as-yet-unnamed all-new show for this tour. Corrosion of Conformity will join as support on select dates.
Tickets will be available starting Wednesday, April 16 at 10AM local time with Artist Presales. Additional presales will run throughout the week ahead of the general onsale beginning Friday, April 18 at 10AM local time at LiveNation.comTOUR DATES:
Tue Sep 16 – Biloxi, MS – Mississippi Coast Coliseum
Thu Sep 18 – Alpharetta, GA – Ameris Bank Amphitheatre*
Sat Sep 20 – Charlotte, NC – PNC Music Pavilion
Sun Sep 21 – Franklin, TN – FirstBank Amphitheater
Wed Sep 24 – Virginia Beach, VA – Veterans United Home Loans Amphitheater
Fri Sep 26 – Holmdel, NJ – PNC Bank Arts Center
Sat Sep 27 – Saratoga Springs, NY – Broadview Stage at SPAC
Mon Sep 29 – Toronto, ON – Budweiser Stage
Wed Oct 01 – Burgettstown, PA – The Pavilion at Star Lake
Thu Oct 02 – Clarkston, MI – Pine Knob Music Theatre
Sat Oct 04 – Cincinnati, OH – Riverbend Music Center
Sun Oct 05 – Tinley Park, IL – Credit Union 1 Amphitheatre
Fri Oct 10 – Colorado Springs, CO – Broadmoor World Arena
Sun Oct 12 – Salt Lake City, UT – Utah First Credit Union Amphitheatre
Tue Oct 14 – Mountain View, CA – Shoreline Amphitheatre
Wed Oct 15 – Wheatland, CA – Toyota Amphitheatre
Sat Oct 18 – Chula Vista, CA – North Island Credit Union Amphitheatre
Sun Oct 19 – Los Angeles, CA – Kia Forum
Wed Oct 22 – Phoenix, AZ – Talking Stick Resort Amphitheatre
Thu Oct 23 – Albuquerque, NM – Isleta Amphitheater
Sat Oct 25 – Austin, TX – Germania Insurance Amphitheater
Sun Oct 26 – Houston, TX – The Cynthia Woods Mitchell Pavilion
*Without support from Corrosion of Conformity
MT 15 and Archon 50 Classic amplifiers offer fresh tones in release alongside a doubled-in-size Archon cabinet
PRS Guitars today released the updated MT 15 and the new Archon Classic amplifiers, along with a larger Archon speaker cabinet. The 15-watt, two-channel Mark Tremonti signature amp MT 15 now features a lead channel overdrive control. An addition to the Archon series, not a replacement, the 50-watt Classic offers a fresh voice by producing retro rock “classic” tones reminiscent of sound permeating the radio four and five decades ago. Now twice the size of the first Archon cabinet, the Archon 4x12 boasts four Celestion V-Type speakers.
MT 15 Amplifier Head
Balancing aggression and articulation, this 15-watt amp supplies both heavy rhythms and clear lead tones. The MT 15 revision builds off the design of the MT 100, bringing the voice of the 100’s overdrive channel into its smaller-format sibling. Updating the model, the lead channel also features a push/pull overdrive control that removes two gain stages to produce vintage, crunchier “mid gain” tones. The clean channel still features a push/pull boost control that adds a touch of overdrive crunch. A half-power switch takes the MT to 7 watts.
“Seven years ago, we released my signature MT 15 amplifier, a compact powerhouse that quickly became a go-to for players seeking both pristine cleans and crushing high-gain tones. In 2023, we took things even further with the MT 100, delivering a full-scale amplifier that carried my signature sound to the next level. That inspired us to find a way to fit the 100's third channel into the 15's lunchbox size,” said Mark Tremonti.
“Today, I’m beyond excited to introduce the next evolution of the MT15, now featuring a push/pull overdrive control on the Lead channel and a half-power switch, giving players even more tonal flexibility to shape their sound with a compact amp. Can’t wait for you all to plug in and experience it!”
Archon Classic Amplifier Head
With a refined gain structure from the original Archon, the Archon Classic’s lead channel offers a wider range of tones colored with gain, especially in the midrange. The clean channel goes from pristine all the way to the edge of breakup. This additional Archon version was developed to be a go-to tool for playing classic rock or pushing the envelope into modern territory. The Archon Classic still features the original’s bright switch, presence and depth controls. PRS continues to stock the Archon in retailers worldwide.
“The Archon Classic is not a re-issue of the original Archon, but a newly voiced circuit with the lead channel excelling in '70s and '80s rock tones and a hotter clean channel able to go into breakup. This is the answer for those wanting an Archon with a hotrod vintage lead channel gain structure without changing preamp tube types, and a juiced- up clean channel without having to use a boost pedal, all wrapped up in a retro-inspired cabinet design,” said PRS Amp Designer Doug Sewell.
Archon 4x12 Cabinet
As in the Archon 1x12 and 2x12, the mega-sized PRS Archon 4x12 speaker cabinet features Celestion V-Type speakers and a closed-back design, delivering power, punch, and tight low end. Also like its smaller brethren, the 4x12 is wrapped in durable black vinyl and adorned with a British-style black knitted-weave grill cloth. The Archon 4x12 is only the second four-speaker cabinet in the PRS lineup, next to the HDRX 4x12.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40 th Anniversary limited-edition guitars throughout the year. For all of the latest news, click www.prsguitars.com/40 and follow @prsguitars on Instagram, Tik Tok, Facebook, X, and YouTube.