A safe space for savage fuzz.
Absolutely ripping fuzz sounds that balance sustain and chaos. Cool low-gain and volume-attenuated textures. Sturdy construction. Cool control layout.
High gain sounds rob pedal of some of its nuance
Pigtronix Star Eater
Though it feels sacrilegious to say, sometimes you need a break from fuzz—a chance to rest the ears, to bathe in the overtones of a little reverb, or just listen to the birds sing. That’s the place I was in when the Pigtronix Star Eater arrived. An hour later I wasn’t nearly as interested in the birds anymore.
It’s hard to pinpoint a classic fuzz touchstone that’s useful to describe the Star Eater. At many settings it has a lot of the chainsaw grind and piercing focus of a Shin-Ei Super Fuzz, but it’s thicker. At other settings it has some of the mass and wallop of a Rams Head Big Muff, but it’s less woofy and thick. Elsewhere you hear echoes of the Foxx Tone Machine and ZVex Fuzz Factory. But generally, such comparisons are pretty futile: The Star Eater shines in a galaxy all its own.
One reason the Star Eater’s personality is hard to pigeonhole is that it has a few. This multi-faceted character is attributable to the Star Eater’s big and snarly but malleable fundamental voice, which is controlled by a simple set of three knobs and two rocker switches. When the contour filter is off, the fuzz is shaped by the volume and gain knobs and the germanium/silicon clipping switch. That’s a simple set of controls, but there are many sounds to find within their respective ranges. Winding up the output volume and gain (called hunger) produces hot, trashy, and saturated tones that are killer for super-focused punk power chords and leads that rip and splatter. Sustain is impressive, too. But it’s not the vocal- or violin-like sustain you hear in a Big Muff. Instead, it’s reedy, cracked and fractured, particularly when holding deep pitch bends.
Sustain is not the vocal- or violin-like sustain you hear in a Big Muff. Instead, it’s reedy, cracked and fractured.
Low gain/high volume settings produce sounds that range from ’66-style germanium fuzz voices at full guitar volume to almost ring-modulated and electric-sitar-like voices at attenuated guitar volumes. These glitchier, messier fuzz sounds are some of the pedal’s coolest colors. The fuzz is plenty loud at these lower gain levels, too, which means you can explore these sounds in a live band without the fear of being rendered silent.
Filtered Fatness and Contoured Screech
The contour filter, controllable via the footswitch, rocker switch, and knob on the left side of the pedal, generates versions of the Star Eater voice that run from scooped and fat to raspy and cutting. Parking the sweep knob somewhere around noon and switching in the contour filter makes a given sound from the fuzz side fatter and fuller. You can also further shape the response and tonality with the contour rocker switch, which moves between a scooped and bumped midrange profile.
When you move the sweep knob a little in either direction, the sustain becomes more unstable and EQ emphasis shifts—usually with deliciously perverse results. The best of these sounds, at least in my demented estimation, are in the clockwise range with the mid-contour switch in scooped mode. Here, screaming notes quickly turn to shards of cracked octave overtones and harmonics that sound especially freaked-out and full of fangs when you move the rocker switch to the scooped setting.
While it was hard to determine any direct lineage between the Star Eater and any other classic fuzz (and what a treat that is), the Star Eater evoked many thrilling musical spaces: Mudhoney, Ghost’s Michio Kurihara, the manic buzz of a thousand aggro psych-punk bands, and the meaty, trucking riffage of 100 Sabbathoid sojourners.
What really sets the Star Eater apart for me, though, is attitude. It’s not the burliest fuzz or the weirdest. But by inhabiting a world between those poles, the Star Eater manages to be articulate and nasty—a poet assassin and a civilized brute. These are the kinds of tones that make a solo or driving rhythm part explode in a recorded mix or onstage. And if you like your guitar parts with a touch of chaos and the confrontational, you’ll find this stompbox beautiful.
- All-analog design delivers authentic old-school fuzz tones
- Dual footswitch setup, sporting a powerful fuzz side and a versatile Boost/Filter side to cover all of your fuzz needs
- Precision matched transistor pairs allow you to effortlessly dial in the “sweet spot”
- Voice rocker switch offers both smooth germanium sounds and wild silicon tones
A how-to on the mental and physical side of practicing.
- Develop an internal sense of rhythm and learn to sync your hands.
- Understand how to subdivide.
- Focus on your mental state while practicing.
Guitar is an unusual instrument, yet somehow we human beings invented it and refined it, both technologically and artistically. There are some days when everything flows, while other days it feels like we’re complete beginners again. This is totally normal. If we really considered how much information our bodies are processing just to be alive in our version of the world, perhaps we’d be a bit kinder to ourselves about our off days and humbler about our good days! I want to share a few perspectives on the core technical aspects of playing that can be helpful to work on and remind ourselves of regularly. Let’s dive in!
The guitar can be a sensitive instrument. The slightest movements can cause sounds that are both wanted and unwanted to come out. Some of these sounds are natural and part of the character of guitar. However, even though we can’t be perfect we can aim to be as clean as possible in our playing with a few simple maneuvers.
Ensuring the picking hand is covering the strings without bearing down on them too hard keeps the lower strings in check. Depending on your picking-hand style, you can also use the 3rd and 4th fingers to lightly mute the upper three strings.
The fretting hand’s index finger takes control over a lot as well. The fingertip can fret a note on the 5th string and tuck under the 6th string at the same time. The flat side of the index finger from the knuckle area towards the hand can also mute higher strings.
It’s important to consider the type of sound we’re using as well. The more gain or compression we use, the more unwanted noise can come flying out of the guitar. Even with the muting techniques above, if we’re too “hard” with them they can start to create noise themselves. So, keep this in mind.
Less gain gives a more dynamic tone, which is harder to play with, but much easier to control dynamically and keep clean. This isn’t to say it’s better or worse, it’s a stylistic choice. But it’s worth considering how much gain we really do need. Noise gates can help, but they can’t fix or hide poor muting and out of sync hands. (More on keeping sync later in this column.
Keep these muting considerations in mind as we go over the areas of technique to address.
Confidence and Subdivisions
Our fretting hand does a lot of work. Picking synchronization is very important. We’ll look at this next. However, I’ve got some working considerations for the fretting hand.
There are many exercises we can do, but ensuring that you’re not pressing down too hard on the fretboard is the first step. We don’t have to press hard unless we have unreasonably high action. If your action is high and it’s slowing you down, I’d suggest going up a string gauge and lowering the action if you want to keep the “resistance” feel. When we lighten up our touch with the fretting hand, we find that our fingers generally stay closer to the fretboard, which helps with economy of movement.The next thing to consider is timing. Timing is everything no matter what technique you’re using. If the pistons in the engine aren’t firing at the right time, they’ll go out of sync, all fire at once, and boom, there’s an explosion. I don’t know anything about cars, but it’s an analogy that might make sense. Being aware of the subdivisions you’re playing and where the downbeat is ensures that both hands are confidently making those maneuvers.
Here's an experiment you can try: Take a simple two-octave scale pattern of your choosing. In Ex. 1 I picked a simple D minor scale. The idea is to change subdivisions in each measure. Here, I started with a measure of eighth-notes then went to triplets, back to eighth-notes, 16th-notes, eighth-notes again, and then I wrapped with quarter-notes. No matter where the “1” of the next measure starts within the scale position, we keep the hands synced up. We can make this more complicated by using a sequence of thirds or triads and doing a similar thing. The goal here isn’t to master every position, sequence, and sub-division. It’s to keep testing different areas out, iron out the errors, and keep it fresh. It’s a great warm up when done slow and bound to get you in sync.
We also need to do similar things for the picking hand. The same idea we discussed above about subdivisions applies to picking as well. The extra thing to consider of course is pick direction and string skipping.
It’s worth practicing alternate picking here, keeping the confidence and control in place even if purely for technical reasons, to ensure the technique is as even as possible. Take a melody pattern like Ex. 2, where I repeat the same two-measure melody, but I change fingerings in the second half. This changes the amount of picked notes on each string, which changes different aspects of how this melody can feel both technically and from an articulation point of view. A simple way of getting more out of this exercise is to start with an upstroke. With practice, it can be quite an effective picking workout.
String Crossing and Skipping
A lot of guitar playing uses one-note-per-string ideas which can sometimes trip us up. In Ex. 3, I wrote an easy chord progression and created a picking patter that I could alternate pick without losing momentum. It’s a practice that can never get old. Just get creative.
In Ex. 4 we take a minor pentatonic shape (here we are using B minor and F# minor) and move through the pattern with string skipping. A super-simple idea, but worth spending time on. Simple skipping patterns like these keep your playing fresh and focused.
You’re training an impersonal organic system, respect it!
When we’re practicing, we can get quite contracted and tense. There can be a pushiness and anxiety about the process, forcing ourselves through the practice session. We have a lot of internal commentary about how it’s all going, often quite unfair.
“This lick should be fast by now!”
“I don’t have the technique or natural ability to do this.”
“Steve Vai practiced for 10 hours a day, so should I.”“I’ll never make it as a guitarist.”
All of these thoughts are abstractions as they are not based in reality. What is happening in the moment is practice. Our attention gets divided between these thought patterns and our feeling of anxiety. Very little attention gets spent on really listening and feeling what we’re practicing with no internal commentary. Because of this we become aversive to practice, we feel that practice doesn’t work or that we don’t have a natural ability or talent.
Therefore, wise practice sessions that are simplified and put into short time frames are most effective. It can be helpful to calm ourselves down before practicing so that our practice is effective.
Why do we practice? We practice because it helps us achieve results. We want to play a riff, we listen carefully, we learn the riff, and then we then practice the riff. Generally, that gets results. However, we are impatient. Humans believe that our thoughts can speed up our bodies and brains. This is a misplaced belief. We can set the conditions to get results, but we can’t control the speed at which our body learns. Practicing trains our bodies, our nervous system, our consciousness.
Our bodies are not separate from the world around us; we are what we eat and breathe. Our thoughts are the thoughts we are exposed to, our feelings are consciously and unconsciously triggered by the world around us. We are no different from nature, we are no different from a tree. We don’t will our fingernails to grow, we don’t will our heart and lungs to keeping going. We have no control over our senses, we can’t choose not to hear sounds around us, we can’t choose not to see when we open our eyes. And in the same way, we can’t force our body to speed up.
We must be grateful for the fact we’re alive before we practice, that there’s a body and mind to practice with. Rather than fighting our fingers and our thoughts, we must approach them with compassion. As you’re practicing, your body is busy programming all this information. Just like growing a plant or vegetable, you can set the right conditions, get the soil right, and water it. But you can’t force it to grow immediately, you must treat it with compassion and trust that you’re doing the right process. You can’t plant the seed then as soon as you see any sprouting, start pulling on the sprouts, that will stop growth all together.
In summary: Appreciate your body, your mind, the fact your conscious to even play guitar. Make sure you set reasonable goals in your practice, make your sessions simple and effective. Then, let the practice happen, trust that you’re programming the right information.
Fitted and non-fitted risers and frames designed to work with popular effects pedals and pedalboards.
Designed to provide an improved system for elevating effects pedals, the product line includes a broad array of options that will fit almost any pedal and pedalboard. Strong, stable, and lightweight, Elephant Foot Risers are designed for gigging musicians who need a reliable and road-worthy solution for improving their pedalboards.
The line features fitted and non-fitted risers and frames that can make your pedalboard as solid, secure, and streamlined as possible – without forcing you to sacrifice your favorite pedals or compromise on your routing preferences.
- No more accidental pedal stomps, no more pedal wobble, no more sloppy pedal boards!
- Works with all popular brands
- Easy and neat cable routing and pedal attachment options
- Strong, yet lightweight
- Versatile - use on wood, composite or metal pedalboards
- Excellent value! Prices starting at only $4.99.
Intro to Elephant Foot Risers
Elephant Foot Risers are priced from $4.99 to $12.99. For more information, please visit elephantfootrisers.com.