A closer look at how, or if, an acoustic cutaway affects your tone.
One of the questions I’m often asked as a guitar maker is if a cutaway changes the sound of an acoustic guitar. I think this is often a polite disguise for a different question: “Do I lose any tone by having a cutaway?” To better understand this, it helps to be familiar with a few of the factors involved.
Of the many variables that create an acoustic guitar’s sound, two significant elements are akin to lungs and vocal cords. The air inside a guitar’s body is like lung capacity. This air mass has a resonance determined largely by its size and the size of any openings. Scientists know this as the Helmholtz resonance. The effect can be demonstrated by blowing air across the top of a bottle. The larger the cavity is, the lower the pitch will be. So, as a beverage is emptied from the bottle, blowing across the top will result in progressively lower frequencies.
The top and back of the guitar are like the vocal cords in a voice box. Their sound is largely governed by their bracing and shape, which affects the tautness and motion to make vowel sounds and syllables, or the notes we play. And just like vocal chords, the tighter or stronger a guitar is, the higher the frequencies it will tend to emphasize. It’s easy to imagine the internal braces changing the stiffness of a top, but the perimeter shape is also significant. As a rule, the more extreme the curves are, the stronger and stiffer the parts become. To get a better picture of this effect, imagine a sheet of paper held on edge with a gentle horizontal curve. Placing the smallest amount of pressure on the paper causes it to wrinkle or flex. If this gradual curve is made tighter, it can withstand far more pressure. If the curve is made even tighter by rolling the paper into a tube, it can withstand a great deal of pressure without crumpling, even if something proportionately heavy were to be placed on top of the open tube-end. This is one reason why the more extreme curves of a jumbo-shaped guitar typically produce a brighter sound than the deep and warm sound of a more broadly curved, dreadnought-shaped guitar. The tight-radius curves of a cutaway on either of these guitar shapes will result in extra strength on the guitar’s upper bout.
When a player’s repertoire contains a lot of high-note passages, the music will be better if the performer has the dexterity and high-note fretboard access a cutaway instrument allows.
These two primary aspects of a guitar’s sonic signature—the lungs and voice—work in tandem with each other. When a portion of the guitar’s body is removed to form the cutaway shape, the air in the guitar body’s lungs is made a little smaller. As long as the size of the soundhole remains the same, the pitch of this air will rise a little compared to the same guitar outline without a cutaway. At the same time, the sharper curves of the guitar’s silhouette make the top and back a little stronger—like vocal cords pulled taut—which further emphasize a higher tonal range.
Now, let’s revisit the question of whether a guitar with a cutaway loses tone compared to an identical instrument without one. No: The tone simply changes a small amount in a way that is perfectly appropriate for what a musician wants to do with the instrument. Practically speaking, a cutaway encourages easy fretting of the highest notes on the fretboard. Meanwhile, the slightly smaller lung capacity and extra vocal-cord tautness from the cutaway guitar body shift the guitar’s frequency response up, which helps to make those high notes sound good. By comparison, a non-cutaway guitar with the same outline will tend to shift its preferred frequency range down to the lower notes on the fretboard.
I feel a more helpful question for a player to ask is, “What will result in the best music?” After all, you could say we hear the relationship between the player and the guitar. So, when a player’s repertoire contains a lot of high-note passages, the music will be better if the performer has the dexterity and high-note fretboard access a cutaway instrument allows. If a player’s style focuses most heavily on low, open-position sounds and chords, the music may sound better with a non-cutaway instrument.
For those who simply want to know how big a difference there is, well, the change is small—small enough that other factors, such as the exact pieces of wood each guitar is made from, the strings, the pick a player uses, and how much coffee they drank that day all seem to matter more. In the end, there is no loss of tone—only a small change. The cutaway option gives players a choice based on their preferences, how they play, and what they like to hear.
Beetronics FX Tuna Fuzz pedal offers vintage-style fuzz in a quirky tuna can enclosure.
With a single "Stinker" knob for volume control and adjustable fuzz gain from your guitar's volume knob, this pedal is both unique and versatile.
"The unique tuna can format embodies the creative spirit that has always been the heart of Beetronics, but don’t let the unusual package fool you: the Tuna Fuzz is a serious pedal with great tone. It offers a preset level of vintage-style fuzz in a super simple single-knob format. Its “Stinker” knob controls the amount of volume boost. You can control the amount of fuzz with your guitar’s volume knob, and the Tuna Fuzz cleans up amazingly well when you roll back the volume on your guitar. To top it off, Beetronics has added a cool Tunabee design on the PCB, visible through the plastic back cover."
The Tuna Fuzz draws inspiration from Beetronics founder Filipe's early days of tinkering, when limitedfunds led him to repurpose tuna cans as pedal enclosures. Filipe even shared his ingenuity by teachingclasses in Brazil, showing kids how to build pedals using these unconventional housings. Although Filipe eventually stopped making pedals with tuna cans, the early units were a hit on social media whenever photos were posted.
Tuna Fuzz features include:
- Single knob control – “Stinker” – for controlling output volume
- Preset fuzz gain, adjustable from your guitar’s volume knob
- 9-volt DC operation using standard external power supply – no battery compartment
- True bypass switching
One of the goals of this project was to offer an affordable price so that everyone could own a Beetronicspedal. For that reason, the pedal will be sold exclusively on beetronicsfx.com for a sweet $99.99.
For more information, please visit beetronicsfx.com.
EBS introduces the Solder-Free Flat Patch Cable Kit, featuring dual anchor screws for secure fastening and reliable audio signal.
EBS is proud to announce its adjustable flat patch cable kit. It's solder-free and leverages a unique design that solves common problems with connection reliability thanks to its dual anchor screws and its flat cable design. These two anchor screws are specially designed to create a secure fastening in the exterior coating of the rectangular flat cable. This helps prevent slipping and provides a reliable audio signal and a neat pedal board and also provide unparalleled grounding.
The EBS Solder-Free Flat Patch Cable is designed to be easy to assemble. Use the included Allen Key to tighten the screws and the cutter to cut the cable in desired lengths to ensure consistent quality and easy assembling.
The EBS Solder-Free Flat Patch Cable Kit comes in two sizes. Either 10 connector housings with 2,5 m (8.2 ft) cable or 6 connectors housings with 1,5 m (4.92 ft) cable. Tools included.
Use the EBS Solder-free Flat Patch Cable Kit to make cables to wire your entire pedalboard or to create custom-length cables to use in combination with any of the EBS soldered Flat Patch Cables.
Estimated Price:
MAP Solder-free Flat Patch Cable Kit 6 pcs: $ 59,99
MAP Solder-free Flat Patch Cable Kit 10 pcs: $ 79,99
MSRP Solder-free Flat Patch Cable Kit 6 pcs: 44,95 €
MSRP Solder-free Flat Patch Cable Kit 10 pcs: 64,95 €
For more information, please visit ebssweden.com.
Upgrade your Gretsch guitar with Music City Bridge's SPACE BAR for improved intonation and string spacing. Compatible with Bigsby vibrato systems and featuring a compensated lightning bolt design, this top-quality replacement part is a must-have for any Gretsch player.
Music City Bridge has introduced the newest item in the company’s line of top-quality replacement parts for guitars. The SPACE BAR is a direct replacement for the original Gretsch Space-Control Bridge and corrects the problems of this iconic design.
As a fixture on many Gretsch models over the decades, the Space-Control bridge provides each string with a transversing (side to side) adjustment, making it possible to set string spacing manually. However, the original vintage design makes it difficult to achieve proper intonation.
Music City Bridge’s SPACE BAR adds a lightning bolt intonation line to the original Space-Control design while retaining the imperative horizontal single-string adjustment capability.
Space Bar features include:
- Compensated lightning bolt design for improved intonation
- Individually adjustable string spacing
- Compatible with Bigsby vibrato systems
- Traditional vintage styling
- Made for 12-inch radius fretboards
The SPACE BAR will fit on any Gretsch with a Space Control bridge, including USA-made and imported guitars.
Music City Bridge’s SPACE BAR is priced at $78 and can be purchased at musiccitybridge.com.
For more information, please visit musiccitybridge.com.
Floyd Rose introduces new USA-made Original saddle sets in various configurations, crafted from premium hardened tool steel with precision CNC machining. Available in chrome and black finishes now.
The new facility offers immediate availability of the legendary Floyd Rose Original saddles in multiple radius configurations for the first time. Engineered to perfectly match specific fretboard curvatures, these saddle sets provide a range of radius options without the need for individual saddle shims. Alongside the classic 12” radius, Floyd Rose has unveiled 8”, 10”, 14”, 16”, and 17” radii saddle sets. Crafted from premium hardened tool steel with precision CNC machining and finished with durable, smooth plating, these saddles are built to withstand the demands of intense performances. Chrome and black sets of USA-made Floyd Rose Original Saddles in various radii are available now at the company’s website, followed by gold and black nickel finishes in the 4th quarter of 2024.
The new Floyd Rose manufacturing center in North Carolina was designed to meet growing demand while ensuring the highest quality available using modern high-tech processes. Bringing production in-house enhances control over every aspect of the process including engineering, material selection, quality control, and scheduling. The facility features four Haas VF-seriesCNC machines, delivering precision machining fine-tuned for high efficiency and clean surface finishes. Alongside machining, the company has established a state-of-the-art metal finishing department and acquired stamping equipment with new capabilities added monthly.
At the heart of the Floyd Rose USA manufacturing center is a dedicated team of engineers and technicians who excel in their craft and are deeply passionate about the legendary product line. With decades of collective experience, the company’s experts meticulously craft each component to exacting standards.
“We are ecstatic to be making these new Original saddles in the USA, giving us better control over quality and production times while offering more robust options like these new radii,” said Andrew Papiccio, longtime president of AP International Music Supply / Floyd Rose and an original owner of Kramer Guitars. "With this new state-of-the-art facility, we are poised todeliver unparalleled quality and performance to musicians worldwide. As we integrate newproducts into this facility, we are expanding our commitment to ‘Made in America’ craftsmanship.”
The company plans to ramp up production of parts and innovations at their USA factory forFloyd Rose and their new AxLabs Hardware division.
For more information, please visit floydrose.com.