
In the early '90s, the rock 'n' roll dream team of Tom Petty and Mike Campbell prepare for a show backstage.
In 1997, the songwriter and his band played a 20-night residency at the historic San Francisco venue, offering fiery concerts that celebrated and defined great American rock ’n’ roll. Now, a four-CD set and Heartbreakers guitarist Mike Campbell tell the story.
“I always had it in the back of my mind,” Mike Campbell says thoughtfully, from his home in the hills outside Los Angeles. He’s taking a moment to savor what it felt like to go back in time and listen to the raw tapes of a now-legendary residency. “Playing the Fillmore was exhilarating for us. I knew then that it was really good, and I would always look forward to the day we’d pull it out again. And when we did, I was pleasantly surprised that it lived up to my expectations and my memory. There’s a lot of kinetic energy and interplay—and fun. We were having fun, you know?”
At the time, fun had been a bit overdue for Tom Petty and the Heartbreakers, and elusive for Petty in particular. He had just finalized a bitter divorce with his first wife and was living in seclusion in a “rundown shack,” as he called it, in the Pacific Palisades. He’d only just released his solo masterpiece, Wildflowers, in November 1994, and, the following year, toured the country behind it with the Heartbreakers. He and the band had also backed Johnny Cash on the country legend’s Rick Rubin-produced album Unchained, so there’d been plenty to celebrate. But as cathartic as Wildflowers had been for Petty, he was still working through more than his fair share of pain and heartbreak.
Tom Petty & The Heartbreakers - Listen To Her Heart (Live at the Fillmore, 1997) [Official Video]
The answer, as it turned out, was to set up shop at the Fillmore in San Francisco—a storied venue he felt a deep connection to, yet somehow had never headlined. “I just want to play,” Petty told the San Francisco Chronicle’s Joel Selvin shortly before the band’s opening night on January 10, 1997. “We want to get back to what we understand. We’re musicians, and it’s a life we understand. If we went out on an arena tour right now, I don’t think we’d be real inspired. We’ve made so many records in the past five years, I think the best thing for us to do is just go out and play and it will lead us to our next place, wherever that may be.”
“We’ve made so many records in the past five years, I think the best thing for us to do is just go out and play and it will lead us to our next place, wherever that may be.”—Tom Petty
“Some of this stuff just felt like we were in rehearsal,” Campbell marvels. “You know, somebody might say, ‘Hey, you know that Dave Clark Five song? Let’s try that.’ And we’d just go into it. The Fillmore really felt like that sometimes. We don’t know this song that well, but we’re just gonna go into it and see what happens. And more often than not, magic would happen.”
In fact, the magic unfurls with astonishing regularity. “Mary Jane’s Last Dance”—originally a one-off tracked between sessions for Wildflowers that turned into a TPHB hit, as well as drummer Stan Lynch’s last stint with the band before Steve Ferrone, who gets his trial-by-fire on Live at the Fillmore, stepped in for good—takes a kaleidoscopic turn over the course of 10 minutes, with Campbell laying into a hypnotic wah solo, followed by Petty’s own slashing foray on his beloved Torucaster, built by former Fender luthier Toru Nittono. “County Farm,” by contrast, is a wild dive into hardrocking blues, building and then ebbing in waves punctuated by Petty’s own inspired wah solos, Campbell’s tasteful slide work, and keyboardist Benmont Tench’s barrelhouse Rhodes piano. It’s of a piece with John Lee Hooker’s “Boogie Chillen,” another extended jaunt that features Hooker himself, who literally walked across Geary Boulevard from his famed Boom Boom Room hangout to join the Heartbreakers onstage, along with guitarist Rich Kirch from his own band.
Petty and Campbell rock out during their Fillmore residency, with a wall of Vox and Fender amps behind them.
Photo by Steve Jennings
The just-released Live at the Fillmore (1997) finds TPHB, as they’re lovingly known to their fans, trailblazing their way to a new level of versatility. Compiled from multi-track recordings of the last six nights of the band’s 20-date residency, the heady and hefty box set boasts nearly 60 songs—many of them covers, including classics like Chuck Berry’s “Around and Around” and a rowdy 10-minute version of Van Morrison’s “Gloria,” as well as more semi-obscure gems like the Zombies’ “I Want You Back Again” and J.J. Cale’s up-tempo “Call Me the Breeze.” It’s a testament not only to Petty’s vaunted and deep knowledge of rock ’n’ roll and all its unruly history, but also to the Heartbreakers’ ability as a unit to grasp a moment, whether they’d played a song a hundred times together or just once, and sear it into memory.
All this attention to detail is no surprise, really, considering Petty and Campbell are well-known tonehounds whose daunting arsenal of vintage gear became part of their identity as a team. Their shared language as players also seems to coalesce with a new sense of vitality during the Fillmore run.
The last six nights of 20 evenings of concerts at the Fillmore, where Petty and his band celebrated their deep roots, were recorded for the recently released boxed set.
Fittingly, the Heartbreakers also seem to feed off the energy of the Fillmore audience. And as much as Live at the Fillmore is a paeon to the small-capacity club roots of rock ’n’ roll, the set manages to elevate guitar worship to dizzying heights, precisely as a result of that intimacy. There’s a beautiful restraint in Petty’s largely solo acoustic version of the early hit “American Girl,” and he brings a stunning power to his “Angel Dream,” with the band quietly and confidently shadowing his every move (especially the late Howie Epstein, whose harmony vocals are as vital to the band’s sound as his sinewy bass lines). Even a cover as far afield as Bill Withers’ “Ain’t No Sunshine” sounds completely natural in Petty’s capable hands, especially during the “I know, I know” breakdown, when he smoothly cues Ferrone and the rest of the band back into the song’s underlying groove.
“Toward the end of it, we were a finely oiled machine,” Campbell jokes. “We had a lot of confidence. It’s like a musical conversation going on between us. That’s the best way I can describe it. When we first met, Tom and I had an instinct that if one guy would play a rhythm or a lick, the other guy just knew exactly what to do to complement it. We just had that telepathy thing—and with Benmont, too. You hear the tones coming from the piano, and your instincts just tell you, ‘Well, you shouldn’t play a big loud note here. You should let it breathe for a second, and then answer it.’ You really have to concentrate and listen to the other guys in the band. Don’t just go off on your own ego.”
Mike Campbell's Gear
Mike Campbell onstage with his current band, the Dirty Knobs. When Roger McGuinn guested with the Heartbreakers at the Fillmore, Campbell acknowledged him as “the king of the Rickenbacker [12-string], so I didn’t want to do anything to get in the way of that. I might pull mine out somewhere else in the set, but at that moment, that’s his space.”
Photo by Jim Bennett
Guitars
- Fender Telecaster
- ’65 Gibson Firebird
- Gibson Les Paul
- Gibson ES-335
- Rickenbacker 360/12
- Rickenbacker 615 Jetglo (painted black by original owner)
Amps
- ’63 Fender Princeton
- ’54 Fender Tweed Deluxe
- Blonde Fender Bassman
- Kustom 250
- Vox AC30
Effects
- Vox wah
- Way Huge Camel Toe
When none other than Roger McGuinn joins them for a mini-set of songs by the Byrds, he puts the band’s active listening to the test. “Eight Miles High” features McGuinn, Petty, Campbell, and Scott Thurston—the Heartbreakers’ “Swiss Army knife” and secret weapon on rhythm guitar—all playing distinctive parts that mesh together with a startling seamlessness. It’s a revelation that mix engineer and co-producer Ryan Ulyate, who had worked with Petty and the band since 2006’s Highway Companion, thoroughly enjoys accentuating.
“There’s a great McGuinn-Campbell face-off in that,” he points out. “McGuinn is doing the solo on the 12-string, and then Campbell just jumps in, and he’s a lot darker. And really, that’s the whole point. What the Heartbreakers brought to the stage always complemented each other, and because they have those distinct tones, you hear the blend; plus you hear the personality of every player. Even when you’ve got three parts going at the same time—and in this case, with Roger, four — you can still hear the different personalities. They were just really good at that.”
Campbell still refers to McGuinn’s appearance with humble reverence. “You know, we worship Roger,” he says. “The Byrds and that sound were a big influence on me, probably equal to Chuck Berry, so we were thrilled to have him on the show. And he’s the king of the Rickenbacker [12-string], so I didn’t want to do anything to get in the way of that. I might pull mine out somewhere else in the set, but at that moment, that’s his space.”
Tom Petty's Gear
Petty onstage with his Firebird, a lesser-seen member of his armada of classic guitars.
Photo by Ken Settle
Guitars
- Fender-style “Torucaster” (purchased in 1981 at Norman’s Rare Guitars in Reseda, CA)
- Gibson Firebird
- Gibson J-200 acoustic
- Rickenbacker 330
Amps
- Blonde Fender Bassman
- Fender Vibratone rotating speaker
- Vox AC30
Effects
- Boss RV-3 Digital Reverb/Delay
- Ibanez Tube Screamer
- Vox wah
- Way Huge Red Llama
And once again, this is what defines the ethos of the Heartbreakers, and why they remain a distinctly American rock ’n’ roll band. The respect for the canon (Chuck Berry, Little Richard, Elvis, and plenty more), the stripped-down simplicity, the complete lack of selfishness, the unified understanding that each member contributes only what’s best for the song, and to have a hell of a lot of fun doing it, so the audience feels pulled in for the full ride—all these qualities reach their peak at the Fillmore shows.
Petty himself thought as much when journalist Paul Zollo told him, in 2006, about a bootleg he’d heard of the Heartbreakers’ version of the Rolling Stones’ “Time Is on My Side,” which makes the final cut for Live at the Fillmore. “I’ve never heard that,” Petty admitted at the time, “[but] over those 20 nights, we played well over a hundred different songs. One night we played four hours, which really isn’t like the Heartbreakers. But we just got into a groove. The encore was an hour and a half, and it was great, because it was intimate. Those things really stretch you, and they let people get a really good look at the group and what we’re about. You can do things in a smaller theater that you can’t do in a coliseum, so it’s kind of liberating.”
“Tom and I had an instinct that if one guy would play a rhythm or a lick, the other guy just knew exactly what to do to complement it. We just had that telepathy thing.”—Mike Campbell
It’s easy to speculate that a renewed sense of creative freedom, spilling over from the Fillmore run, provided the spark for later Heartbreakers albums. And 2010’s Mojo, in particular, with its overt nods to a bluesier and more improvised-from-the-floor delivery, comes to mind. Campbell doesn’t name any specific recording that reaped the benefits of the band’s growth during that incredibly fruitful month of shows in early 1997. Instead, to him the afterglow feels much more overarching, lasting, and profound.
“When we started out playing, we weren’t playing arenas, you know?” Campbell says. “We were playing for two hundred, a thousand people, and the joy of just plugging in and hearing your sound, and hearing the other guys—a rock ’n’ roll band is amazing that way. You get everyone in a room, you all plug in, you go one-two-three-four, and this thing happens. And it’s like I said, the Fillmore was exhilarating for us, to get back to that approach to music. It was just very spiritual and very inspiring.”
Tom Petty & The Heartbreakers - The Fillmore House Band - 1997 (Short Film Part 1)
This is the first part of a tantalizing two-part mini-documentary on TPHB’s ’97 Fillmore stand. The band was geared up for an intimate series of dates that allowed them to stretch beyond the creative limitations of a normal tour—exemplified by Petty’s stripped-down acoustic performance of “American Girl,” for starters.
A reverb-based pedal for exploring the far reaches of sound.
Easy to use control set. Wide range of sounds. Crush control is fun to explore. Filter is versatile.
Works best as a stereo effect, which may limit some players.
$299
Old Blood Noise Endeavors Dark Star Stereo
oldbloodnoise.com
The Old Blood Dark Star Stereo (DSS) is one of those pedals that lives beyond simple effect categorization. Yes, it’s a digital reverb. But like other Old Blood designs, it’s such a feature-rich, creative take on that effect that to think of it as a reverb feels not only imprecise but unfair.
The Old Blood Dark Star Stereo (DSS) is one of those pedals that lives beyond simple effect categorization. Yes, it’s a digital reverb. But like other Old Blood designs, it’s such a feature-rich, creative take on that effect that to think of it as a reverb feels not only imprecise but unfair.
In this case, reverb describes how the DSS works more than how it sounds. I’ve come to think of this pedal as a reverb-based synthesizer, where reverb is the jumping-off point for sonic creation. As such, the sounds coming out of the Dark Star can be used as subtle sweetener or sound design textures, opening up worlds that might otherwise be unreachable.
Reverb and Beyond
Functionally speaking, the DSS starts with reverb and applies a high-/low-pass filter, two pitch shifters, each with a two-octave range in each direction, plus bit-crushing and distortion. Controls for lag (pre-delay), multiply (feedback), and decay follow, with mini knobs for volume, mix, and spread. Additional control features include presets, MIDI functionality, plus expression and aux control.
The DSS can be routed in mono, stereo, or mono-in/stereo-out. Both jacks are single TRS, and it’s easy to switch between settings by holding down the bypass switch and selecting via the preset button.
Although it sounds great in mono, stereo is where this iteration of the Dark Star—which follows the mono Dark Star and Dark Star V2—really comes alive. Starting with the filter, both pitch shifters, and crush knobs at noon—all have center detents—affords the most neutral settings. The result is a pad reverb, as synthetic as but less sparkly than a shimmer. The filter control is a fine way to distinguish clean and effect signals. In low-pass mode, the effect signal can easily get dark and spooky while maintaining fidelity and without getting murky. On the other end, high-pass settings are handy for refining those reverb pads and keeping them from washing out the clarity of the clean signal.
Lower fidelity is close at hand when you want it. The crush control, when turned counterclockwise, reduces the bit rate of the effect signal, evoking all kinds of digitally compromised sounds, from early samplers to cell phones, depending on how you flavor it. Counterclockwise applies distortion to the reverb signal. There’s a lot to explore within the wide ranges of the two pitch controls, too. With a four-octave range, quantized in half steps, the combinations can be extreme, and Dark Star takes on a life of its own.
Formless Reflections of Matter
The DSS is easy to get acquainted with, especially for a pedal with so many features, 10 knobs, and two footswitches. I quickly got a feel for the reverb itself at the most neutral filter and pitch settings, where I enjoyed the weight a responsive, textural pad lent to everything I played.
With just the filter and crush controls, there’s plenty to explore. Sitting in the sweet spot between a pair of vintage Fenders, I conjured a Twin Peaks-inspired hazy fog to accompany honeyed diatonic arpeggios, slowly filtering and crushing that sound into a dark, evil low-end whir as chords leaned toward dissonance. Eventually, I cranked the high-pass filter, producing an early MP3-in-a-good-way “shhh” that was fine accompaniment to sparser voicings along my fretboard. It was a true sonic journeyThe pitch controls increase possibilities for both ambience and dissonance. Simple tweaks push the boundaries of possibility in exponentially deeper directions. For more subtle thickening and accompaniment sounds, adding octaves, which are easy to tune by ear, offers precise tone sculpting, dimension, and a wider frequency range. Hearing simple harmonic ideas plucked against celeste- and organ-like reverberations kept me in the Harold Budd and Brian Eno space for long enough to consider new recording projects.
There is as much fun to be had at the highest feedback settings on the DSS. Be forewarned: Spend too much time there and you might need a name for your new ambient band. Cranking the multiply and decay knobs, I’d drop in a few notes, or maybe just a chord, and get to work scanning the pitch knobs and sculpting with the filter. Soon, I conjured bold Ligeti-inspired orchestral sounds fit for a guitar remix of 2001: A Space Odyssey.
The Verdict
The Dark Star Stereo strikes a nice balance between deep control, a wide range of sonic rewards, playability, and an always-sounds-great vibe. The controls are easy to use, so it doesn’t take long to get in the zone, and once you do, there’s plenty to explore. Throughout my time with the DSS, I was impressed with its high-fidelity clarity. I attribute that to the filter, which allows clean and reverb signals to perform dry/wet balance and EQ functions. That alone encouraged more adventurous and creative exploration. Though not every player needs this kind of tone tool, the DSS is a must-check-out effect for anyone serious about wild reverb adventures, and it’s simple and intuitive enough to be a good fit for anyone just starting exploration of those zones. However you come to the Dark Star, it’s a unique-sounding pedal that deserves attention. PG
Great Eastern FX Co. has released the limited-edition OC201 Preamp, featuring vintage Mullard OC201 transistors for a unique fuzz sound. Part of the 'Obsolete Devices' series, this pedal combines classic circuits with modern components for optimal tone and reliability.
Boutique British pedal designers GreatEastern FX Co. have released a new pedal. Limited to just 50 units, the OC201 Preamp is an intriguing twist on the familiar two-transistor fuzz circuit, built around a pair of new-old-stock Mullard OC201 transistors.
“The OC201 is a very early silicon transistor,” company founder David Greeves explains. “It was actually the first silicon transistor made by Mullard, using the same method as their germanium devices. It’s pretty crude by modern standards, with very low gain and limited bandwidth, but that’s exactly what makes it so great in a fuzz pedal.”
This little-known low-gain silicon transistor is responsible for the OC201 Preamp’s palette of sounds, which GreatEastern FX say ranges from dirty boost and garage rock drive sounds up to a raw and richly textured fuzz, all with the excellent volume knob clean-up characteristics this style of fuzz is famous for. The circuit has also been tweaked to deliver a healthy kick of volume to your amp.
This limited-edition pedal is the first in a new series that Great Eastern FX are calling ‘Obsolete Devices’. According to the company, the Obsolete Devices series will feature the company’s take on a range of classic circuits, constructed using a mixture of vintage and modern components. It’s a distinct departure from Great Eastern FX’s main range of pedals.
“With pedals like the Design-a-drive and the XO Variable Crossover, we’re really committed to developing original designs that bring something new to the table,” founder David Greeves explains. “I’m always very conscious of choosing parts that aren’t going to go obsolete so we can go on making the pedals for as long as people want to buy them. But I also love messing around with old parts and classic circuits, which is a totally different mentality. The Obsolete Devices series is basically a way for me to have fun modifying these classic circuits and experimenting with my stash of NOS components, then share the results.
“The name is a little bit of an inside joke,” he continues. “I think what gets labelled as ‘obsolete’ is very subjective. As pedal designers and guitar players, we obsess over obsolete components and what, in any other field, would be considered outdated designs. So the name is a nod to that. I also loved the thought of us coming out with some brand-new Obsolete Devices of our own!”
Alongside the pedal’s new-old-stock Mullard OC201 transistors – which are the reason only 50 of them are being made – the OC201 Preamp uses quality modern components, including high-tolerance Dale metal film resistors and WIMA capacitors. GreatEastern FX say that this hybrid approach, using vintage parts where they make the most difference sonically and low-noise modern parts elsewhere, will deliver the best combination of tone and reliability while also keeping the price from spiralling out of control.
The OC201 Preamp will cost £249 in the UK, $299 in the US and €299 in the EU. It’s available now direct from Great Eastern FX Co. and from the following dealers:
- UK – Andertons
- Europe – Pedaltown.nl
- USA – Sound Shoppe NYC
- Canada – Electric Mojo Guitars
For more information, please visit greateasternfx.com.
Obsolete Devices OC201 Preamp | Great Eastern FX Co. - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.“I do think that PTP circuits should stay that way, and circuits made for PCB sound great and don’t need to be handwired to sound good,” says R2R Electric's Cris Vincent, who is especially adept at creating vintage-flavored fuzz machines.
Do vintage parts make better pedals? Not always.
Treble boosters have been used by legends like Brian May, Tony Iommi, Rory Gallagher, Marc Bolan, Stevie Ray Vaughan—you name it. They have empirically proven their place in the evolution of rock ’n’ roll, and even paved the way for entirely new music genres. Naturally, as a pedal builder, I had to make my own. In fact, I was building treble boosters even before Sehat Effectors was born. Technically speaking, the circuit is simple—just a single transistor and a few components.
Treble booster pedal, Vintage fuzz pedals, R2R Electric effects, Guitar pedal building, Brian May treble booster, Dallas Rangemaster clone, Vintage guitar tones, Recycled pedal components, Boutique guitar pedals, Handmade effects pedals, Analog guitar effects, Point-to-point wiring, DIY guitar pedals, Vintage amplifier tone
But here’s the catch: The results didn’t meet my expectations. At least, not with the setup I had at the time: an old Japanese Iwama Strat copy and a small solid-state practice amp. The sound was terrible—just downright awful! I kept asking myself, “Did I do something wrong? Or was I missing some secret sauce?” My experiments with the treble booster ended up as a long-abandoned project, collecting dust in my workshop.
Years later, I stumbled across R2R Electric on Instagram, and man, I was blown away by this guy. He’s laser-focused on crafting treble boosters using all kinds of old, recycled parts, and they sound amazing! I couldn’t help but be influenced by what he showcased in each post. It was like a masterclass on how he builds treble boosters and how vintage fuzz pedals work their magic.
This curiosity led me to reach out to Cris Vincent of R2R Electric to ask him about his perspective on treble boosters and vintage fuzz.
Can you share the origin story of R2R Electric?
R2R Electric began officially five years ago. I had been saving old parts from reel-to-reel recorders, old radios, and other vintage audio equipment. I had no experience in building pedals, so I didn’t know what to do with all the parts.
One day, I met Tucker [Krishock] of Lamp Electric and asked him to build a Dallas Rangemaster from the parts I had collected. The first time we plugged in, it blew our minds! So, we began “Reel To Reel Effects.” I began practicing copying the pedal Tucker had made me, and selling them on Reverb under the brand “R2R.” Sadly, Tucker ended up passing away, and so I decided to carry on by combining our two names into R2R Electric.
“If you feel better playing a hand-built pedal versus a mass produced one, there’s something to that. Even if it’s only in your head.”
What fascinates you about treble boosters and vintage Fuzzes?
I became obsessed with vintage effects during my time working in recording. I would always be hunting for new tones or to replicate tones from classic records. I had picked up a Roland BeeBaa, which has a fuzz and a treble booster, and I decided to see what the booster sounded like. I loved it! There is something to the simplicity of these old circuits that I feel give a more natural feel and tone. A vintage boost or fuzz needs to be as equal in your rig as the guitar or amplifier—they have that much impact on the overall performance of a rig.
Do you believe vintage effects should ideally be paired with vintage amplifiers?
I think they can sound great through both vintage and modern amps. The drawback with some vintage amps is that they weren’t meant to be hammered by a huge fuzz signal. I’ve had to refine several vintage speakers that couldn’t handle fuzz. Most modern amps are designed with pedals as a fact of life and can handle most of the tones you throw at them. So, from a reliability standpoint, modern amps handle old fuzz pedals a bit better. But for those classic tones, the pairing of a vintage amp and vintage pedal is the only way to get there.
What inspired you to use recycled components?
That was all I had. I have no formal electrical experience, so I didn’t realize that old parts could go bad or be noisy. It took a lot of working with them to realize how unreliable they can be. I also feel like they have a sound that modern components can produce too. Using old parts to build old circuits just makes sense to me.
Do you think there's a tonal difference between PCB construction and point-to-point designs?
I don’t think one sounds better than the other, really. I think it comes down to the original design of the circuit and the limitations of that particular construction type. I do think that PTP circuits should stay that way, and circuits made for PCB sound great and don’t need to be handwired to sound good. The old PTP circuits tend to sound better, but that’s just my opinion. I think it all comes down to everyone’s own personal taste. If you feel better playing a hand-built pedal versus a mass-produced one, there’s something to that. Even if it’s only in your head.
Based on this brief interview, I’ve come to realize just how deeply spiritual and immersive the experience of finding the sound in your head can be. It’s a stark contrast to my own initial disappointment with the treble booster I built—it was something I felt was a failure and quickly discarded. Cris, on the other hand, exemplifies someone who devoted himself with unwavering focus, constantly seeking until he reached that moment of enlightenment—the “eureka” moment—that validated what he had believed in all along.
In a way, what I’ve done—like replacing electric guitar strings with nylon strings—was not technically wrong, but clearly not the right fit. The same principle applies to treble boosters, fuzz pedals, and perhaps many other effects pedals. They each have unique tendencies and characteristics that may be waiting for their own “eureka” moment to truly shine.
Marty Friedman and his trusted tech, Alan Sosa, who handles all effects switching manually during the show, showed us the goods.
Brought to you by D’Addario.
Getting in Shape
Not every guitar model looks good on every player. Could Friedman pull off Dimebag’s Dean machines? He doesn’t think so. But a Les Paul body is universally agreeable. “If an accountant picks up this guitar, he’s going to look really cool,” says Friedman. That’s why he went with the LP-style mahogany body on his signature Jackson Pro Series MF-1 with a cracked purple mirror finish. The design, of course, has a “Jacksonized” headstock and Friedman’s logo to set it far apart from its Gibson counterparts.
The guitars come loaded with Friedman’s signature EMG MF passive pickups, and Friedman strings his with D’Addario NYXL .010–.046s. He plucks with Dunlop picks.
On deck in case of emergency is a Jackson X Series Signature Marty Friedman MF-1, a budget-conscious alternative to the flashy Pro Series MF-1.
ENGL
Another signature piece, this ENGL Marty Friedman INFERNO Signature E766 is a 100-watt firebreather that Friedman designed with the German amp makers. Friedman says they started from the company’s Steve Morse signature amplifier, then pared back the elements he didn’t use, resulting in a cheaper but still incredibly powerful product.
Marty Friedman's Board
Friedman asked Sosa to build him a board based on his needs, and Sosa delivered this no-frills stomp station, which he operates backstage during the show. First, Friedman’s signal hits a Revv G8 noise gate which the tech dubs the most important pedal; he has his hand on it the whole show, tweaking its settings for different parts. After, there’s an MXR M87 bass compressor for clean tones, Maxon AF-9 Auto Filter, MXR Analog Chorus, MXR Phase 90, Ibanez Tube Screamer, and a Boss DD-500. Friedman runs to his board via a Shure GLXD6+ wireless system, and a Boss ES-8 switching system helps simplify Sosa’s job.
Settings and effect applications can change from night to night. Sosa will try out different things during the set, and afterward, he and Friedman will decide what worked and what didn’t.