If you survey the gear that shows up on stages and studios for long enough, you’ll spot some patterns in the kinds of guitar amplification players are using. There’s the rotating cast of backline badasses that do the bulk of the work cranking it out every day and night—we’re all looking at you, ’65 Deluxe Reverb reissue.
Follow some super-hip players and studios on the cutting edge and you’ll find a host of meticulously crafted boutique amps. And for the various flavors of road-dogs, there’s also the emerging force of modeling units that emulate everything under the sun.
Then there are the players who have to go to the source and are doing the tone-gods’ work by keeping vintage amps in the game. (There are a lot of us, and we take our work seriously.) At the highest level of stage and studio, you’ll find the elite vintage models—the tweeds, black-panels, plexis, and all their pals. Those amps command their fair share of literal and digital ink. Then there are the oddball selections that some new player will bring to everyone’s attention.
But there’s a less-hyped flavor of vintage amp that actually shows up much more often than those rare gems. These are the everlasting classics you’ve seen about a million or so times played by bands in every size of stage and lining the walls of your favorite studio. They’re the perennial workhorses whose reputations thrive because of some formula of tone, consistency, reliability, and—maybe the most important variable—price.
Brooklyn-based amp-repair guru Pat Kauffman operates Patrick Kauffman Electronics out of Main Drag Music, where he also teaches amp-building workshops.
Here are six of these vintage models, all priced to fit in a gigging budget, coming in right around $1,000 or less as of this writing. With a trio of experts on hand, here’s an idea of what makes each of these amps tick all these years after they were first introduced.
Silver-Panel Fender Bassman
A drip-edge era Fender Bassman head.
Photo by Pat Kauffman
The Fender Bassman is, of course, one of the most classic amplifiers. The tweed Bassman circuit is one of the most copied and modified circuits of all, serving as a platform for so many designs to follow, most notably Marshalls, as well as a couple more on this list. By the time the silver-panel era began, first with the drip-edge years starting in 1967, the Bassman circuit had evolved from those early days through the also highly coveted black-panel era.
“The silver-panel is not that different from the black-panel,” notes Brooklyn amp-repair guru Pat Kauffman, “and you can easily modify them to black-panel specs—they’re the same transformers.” Both eras kick out 50 watts—though there are quite a few variations, such as Bassman 100, 135, and more than a few others, we’re simply talking about the “Bassman”—and host a tube set that includes a pair of 6L6 power tubes, a trio of 12AX7s, and an ECC81.
“I think the right person can get their own signature tone from these, and it’s not gonna be one that will come from a Fender, it’s not gonna come from a Marshall.” —Jeff Bober on the Ampeg Gemini
This era of Fender Bassmans deliver plenty of headroom, but unlike the Fender “reverb” amps, Kauffman points out there’s an extra gain stage, which he says “gives it a little more grit that makes them kind of unique.”
Jeff Bober, former PGamp columnist and cofounder of Budda Amplification, adds that the silver-panel Bassmans “compress earlier, which might be a little opposite of what they were going for, so you can push the front end a little easier.”
Even better, Kauffman points out that they’re “easily serviceable. That’s key number one—all the parts are available.”
Ampeg Gemini
This Ampeg Gemini II combo includes a 15" speaker.
Photo by Pat Kauffman
If you feel like you’ve seen an Ampeg combo in most studios you’ve ever entered, you probably wouldn’t be exaggerating. And there’s a good chance that a lot of those were an Ampeg Gemini or Gemini II, offered starting in the mid ’60s, with a few variations over its life, from 22 to 30 watts, with speaker offerings ranging from a single 12" to a 15", and in later eras with more watts and more speaker configurations.
Because of their size, these are less common on stage than they are in studio, but Bober—who is a proud native of Ampeg’s hometown of Linden, New Jersey—says of the Geminis as well as the smaller, and also very cool, 12-watt Ampeg Jet, “They have their own unique sound, they’re not all that loud to start with so if you’re in a situation where you can crank an amp a little bit, these are really good to do it.”
Jeff Bober founded Budda and EAST Amplification and was the author of PG’s Ask Amp Man column.
These full-featured combos have onboard reverb and tremolo, and they use a set of 7591 power tubes. Bober points out these are “more of a hi-fi-sounding, very full-bodied tube” that he describes as “somewhere between a 6V6 and a 6L6 power-wise, but with a different tonality.” He adds, “I think the right person can get their own signature tone from these, and it’s not gonna be one that will come from a Fender, it’s not gonna come from a Marshall.”
While these amps are known for their reliability as well as well as their unique sound, Kauffman points out that the phase-inverter tube, a 7199, has gotten expensive in the modern market: “A lot of times, they’ve been changed out to different tubes, or they have a little converter adapter in, so that’s something to look out for.”
Traynor YBA-1 Bass Master
With two inputs per channel, it’s easy to “jump” channels with a patch cable to extend the voice of the Traynor YBA-1.
Photo by Thunder Road on Reverb
Beloved by both guitarists and bassists, the 45-watt Traynor YBA-1 circuit was the company’s first offering in 1963, when it was called the Dyna-Bass. By the next year, it was retitled the Bass-Master and the title stuck. While the company didn’t have the name recognition of a Fender or Ampeg, they developed an underground reputation that is still going strong. In 1969, Traynor provided the backline to 1969’s Toronto Rock ’N’ Roll Revival concert, where the Plastic Ono Band recorded their Live Peace in Toronto 1969 live album, and which was later celebrated in the 2022 documentary REVIVAL69: The Concert That Rocked the World.
The YBA-1’s simple 3-band EQ control set and 2-knob “range expander” make for easy tone-sculpting, and jumping the channels with a small patch cable opens its voice even wider. Kauffman calls the amp a “Bassman on steroids.” He points out that some models use 7027 power tubes—“basically a beefier 6L6”—and others use 6CA7s, plus a pair of 12AX7s and an ECC83. These amps are easily modified to replicate a JTM45 circuit, which is a popular change for some, but many players prefer to keep them unchanged.
“People who are Traynor fans are Traynor fans. They’ve either owned one and sold it and regret it, or they own three of them.” —Blair White on the Traynor YBA-1
Bober says that the YBA-1 is “built as good as any Fender or eyelet-board kind of design. They have probably the biggest transformers for their power rating of amps being built at that time. They’re very clean circuits, great pedal platforms, and they sound great.”
Blair White, owner of Nashville’s Eastside Music Supply, has witnessed the cult of Traynor firsthand and says, “People who are Traynor fans are Traynor fans. They’ve either owned one and sold it and regret it, or they own three of them.” Despite their reputation as well-made, reliable amps with a great tone, White notes that they’re still easy to get a hold of: “I don’t know if it’s just because it was not Fender or Marshall, but for whatever reason, you can still find those for $600 or $700.”
Sovtek MIG
This Sovtek Mig 100h is the high-gain member of the Mig family.
Photo by Brent’s Gear Depot on Reverb
Built in Russia by New Sensor starting in 1991, this head, which came in 50-, 60-, and 100-watt models, is another spin on the same tweed Bassman formula that begat the JTM45 and the Traynor YBA-1. Running a pair of 5881 power tubes and a pair of 12AX7s, the MIGs featured a solid-state rectifier and a slightly slimmed-down control set from the Bass-Master, with two independent volume controls (non-jumper-able), a 3-band EQ, and a presence knob.
In an A/B comparison with the modern EHX MIG 50, where both sound identical (or close to it), JHS Pedals’ head honcho Josh Scott has gone on the record and called the MIG 50 his “favorite amp in the history of the world.” The modern ones tend to come in a little less expensive than the vintage models, which Bober points out have an “iffy” build quality thanks to their Eastern Block components.
“They have a cascading input, so there is an extra gain stage like the JCM800s.” —Pat Kauffman on the Sovtek MIG
Kauffman agrees, “They’re a little awkward to service. A lot of the hardware is kind of cheap, so you’ll often find the jacks busting and the pots busting.” You might want to look out for a deal if you’re considering a vintage model, which could be well worth your time. Kauffman adds that the MIGs have their own cult and calls them “fantastic-sounding amps. They have a cascading input, so there is an extra gain stage like the JCM800s, so they kind of have this Marshall sound but a little more rounded.” If Scott’s comparison tells us anything, the modern version is also worth checking out.
Music Man HD-130
The powerful Music Man HD-130 in its oddball 2x10 form—that’s a lot of power to push through two little speakers!
Photo by Main Drag on Reverb
When Music Man amps hit the scene in the mid ’70s, they were unlike anything Leo Fender had set out to do with his previous designs. Gone was the simple, efficient circuitry of his earlier work. Instead, Music Man amps featured a hybrid solid-state preamp and tube power amp, with the clear target of maximum headroom.
The HD-130 was the most extreme of Music Man’s offerings, delivering a sizzling 130 watts via four 6CA7 power tubes and available in both head and combo form. (If that sounds too extreme, you could get it shrunk down to a small 2x10 combo… but with no less wattage!) The master-volume control set features two channels each with a 3-band EQ and a bright switch, plus combo models and some heads included reverb and tremolo.
Blair White, co-owner of Nashville’s Eastside Music Supply, is so passionate that he spoke to PGwhile movers were loading the store’s gear into their new location!
“Those amps are punishing!” says White. “They’re probably the most bang for your buck that you’ll get as far as power and wattage. Their unique formula certainly got the attention of some major players, and Mark Knopfler, Robbie Robertson, and Johnny Winter all counted on them at some point.”
These days, Kauffman says they remain quite reliable, but issues can arise with modern tubes. “They use high plate voltages, which tends to eat new tubes,” he explains. “If you get the electrolytic caps replaced and have the tubes biased correctly, they really should be reliable. But if you’re having a problem, it’s usually cooking power tubes because they’re a new set.” He adds that, while tube supply changes, he currently finds JJ EL34s to hold up well against the HD-130’s high voltage.
Peavey Mace
The 160-watt Peavey Mace promises extreme volume with high clean headroom plus onboard distortion and phaser.
Photo by Free Lunch on Reverb
No list of great-value amps is complete without a Peavey. Of course, their broad range of models over the years made it hard to decide which to include. At a whopping 160 watts, the Peavey Mace made the cut, if only for sheer power. It’s another hybrid amp, combining a whopping sextet of 6L6s in the power section with a solid-state preamp in both head and 2x12 combo form. Their clean headroom puts them in a class with the HD-130 and also put them onstage with Lynyrd Skynyrd’s Gary Rossington.
The Mace is less common than most of the others on this list, but late-’70s models are fairly easy to track down. Bober says, “If you want loud and clean, those are great amps.” But he notes that the Mace is “not the most accurate pedal platform. Drive or overdrive pedals tend to try and push the front end to get more juice, but things that have IC chips in the front end don’t respond the same way, they don’t agree to being pushed to their limits, and they don’t generate the same harmonics as a tube does.” The Mace has both a normal and effects channel, which includes distortion and reverb, as well as an onboard phaser.
Kauffman reports from his work bench that the Mace is “great and reliable.” He explains that these amps were built on a printed circuit board, and he tends to see bad solder joints when they come in for service. That’s nothing to be afraid of though. “If you have one,” he says, “you could get it cleaned up, change the electrolytic caps, and have it resoldered, and you should be fine.”
At 160 watts, you’ll want to make sure you have your earplugs handy.
- Silver and Black: Tips for Buying Vintage Fender Amps ›
- Ask Amp Man: Beefing Up a Vintage Fender Vibrolux Reverb ›
- The 10 Biggest Problems With Vintage Fender Amps ›
Vox’s Valvenergy Tone Sculptor
I spent a day workshopping ideas in my studio using just the Vox Valvenergy Smooth Impact compressor and Tone Sculptor EQ, and a dash of amp tremolo and reverb to taste. In the process, I produced more arresting sounds than I had heard from my guitars in many days. There were radical direct-to-desk-style Jimmy Page/Beatles distortion tones, sun-sized, cosmic electric 12-string, Bakersfield twang that could burn through crude, and many other sweet and nasty colors. Most decent EQ and compressor combinations can achieve variations on all those themes. But the Smooth Impact and Tone Sculptor also reveal interesting personalities in unexpected places.
The individuality and energy in the Vox Valvenergy pedals is attributable, in part, to the Nutube vacuum tube used in the circuit. Though it looks little like a vacuum tube as most guitarists know them, the thin, wafer-like Nutube is, in fact, a real vacuum tube like those used in fluorescent displays. Fluorescent display tubes have limitations. A maximum operating voltage of around 40 volts means they aren’t useful for bigger power tube applications like a 6L6, which has an operating voltage of about 400 volts. But it can work quite well as a preamp tube in concert with an op amp power section, which is how the Nutube is used in the new Valvenergy pedals, as well as older Vox products like the Vox MV50 and Superbeetle amps.
Valvenergy Tone Sculptor
When you think about “cinematic” effects, you likely imagine big reverb or modulation sounds that create a vivid picture and feeling of space or motion. But narrow, hyper-focused EQ profiles can evoke very different and equally powerful images. Radical EQ settings can add aggression, claustrophobic intimacy, and stark, explosive dark-and-light contrasts more evocative of Hitchcock’s Psycho than Ridley Scott’s Blade Runner.
Any of these moods can be summoned from the Valvenergy Tone Sculptor. Six sliders cut or boost 10 dB frequency bands spanning 100 Hz to 5.6 kHz. A seventh slider cuts or boosts the master output by 12 dB. This platter of options might not sound like much. But you can use these seven controls together to very specific ends.
“Radical EQ settings can add aggression, near-claustrophobic intimacy, and stark, explosive dark-and-light contrasts.”
For example, bumping the high-midrange and the master output produces narrow cocked-wah-like filter sounds with enough push to produce extra amp overdrive—effectively turning the Tone Sculptor into a buzzy, almost fuzz-like filter effect. But unlike a wah, you can carefully scoop high end or add a spoonful of bass to blunt harsh frequencies or give the tone a bit more weight. You can also broaden the palette of an amp/guitar pairing. I matched a particularly trebly Jazzmaster bridge pickup with a very hot and toppy Vox AC15-flavored amp for this test—a recipe that can be spiky on the best days. But with the Tone Sculptor in the line, I could utilize the same sharp, fuzzy, and filtered Mick Ronson wah tones while shaving some of the most piercing frequencies.
EQ pedals exist on many points along the cost spectrum. And at $219, the Tone Sculptor lives on the high side of the affordable range. Does it offer something less expensive models can’t deliver? Well, for one thing, I found it relatively quiet, which is nice whether you’re shaping toppy high-contrast effects or performing more surgical adjustments. And the sliders feel nuanced and nicely tapered rather than like a dull axe with a few basic frequency notches. But in many situations I also liked the color imparted by the circuit—generated, presumably, by the Nutube. “Color,” in audio terms, is a broad and subjective thing, and one should not necessarily expect the warm, tube-y glow of a vintage tube Pultec. Still, the Tone Sculptor has many forgiving, flattering qualities—typical of studio EQs—that enable fine tuning and experimentation with more radical and creative applications of the effect.
Valvenergy Smooth Impact
As with the Tone Sculptor, the Smooth Impact’s use of Nutube engenders certain expectations. It’s easy to surmise that because Smooth Impact has a vacuum tube in the circuit that it will behave like a little Teletronix LA-2A leveling amplifier. That’s a big ask for a $219 stompbox. On the other hand, the Smooth Impact exhibits some appealing characteristics of studio tube compression. At lower compression levels, it works well as a thickening agent—adding mass without much additional noise. And at higher compression levels it can sound snappy, crisp, and tight without feeling like you’ve bled every trace of overtone from your signal.
The Smooth Impact’s controls aren’t totally atypical. But because it lacks some familiar features like variable attack and release, yet is more complicated than a 1-knob DynaComp, you have to trust your ear to navigate interactions among the controls. The most unfamiliar of these is the 3-way vintage/natural/sag toggle. The first two are defined by preset attack and release settings: Vintage is slow attack and long release, and natural is the opposite. The sag mode’s compression is more like what you get from tube saturation, and it’s useful for adding thickness and complexity to a thin amp tone at modest compression levels.
Though the vintage and natural modes certainly have a different feel, they don’t always sound worlds apart. And like the sag mode, the thing they have in common is the way they enrich lifeless amp output at low to medium compression, with a bit of grind from the tube gain and a little extra makeup gain from the output. At the most aggressive settings, the tube gain can get a little crispy. And really crushing the compression can flatline your tone without adding much in the way of extra sustain. These are limitations common to many compressors with similar features. But unless I was chasing very ultra-snappy Prince and Nile Rodgers fast-funk caricatures, I enjoyed the Smooth Impact most in its in-between ranges, where mass, mild, harmonious drive, and low noise showcase the pedal’s sometimes studio-like personality.
Boss’ firstWaza Tube Amp Expander, built with an integrated power amp that enables boosted signal as well as attenuated sounds, was and remains the OX’s main competition. Both products have copious merits but, at $1,299 (Boss) and $1,499 (Universal Audio), each is expensive. And while both units are relatively compact, they aren’t gear most folks casually toss in a backpack on the way out the door. The new Waza Tube Expander Core, however, just might be. And though it sacrifices some refinements for smaller size, its much-more accessible price and strong, streamlined fundamental capabilities make it a load-box alternative that could sway skeptics.
Micro Manager
The TAE Core is around 7 1/2" wide, just over 7 " long, and fewer than 4 " tall, including the rubber feet. That’s about half the width of an original TAE or OX. The practical upside of this size reduction is obvious and will probably compel a lot of players to use the unit in situations in which they’d leave a full-size TAE at home. The streamlined design is another source of comfort. With just five knobs on its face, the TAE Core has fewer controls and is easier to use than many stompboxes. In fact, the most complicated part of integrating the TAE Core to your rig might be downloading the necessary drivers and related apps.
Connectivity is straightforward, though there are some limitations. You can use TAE Core wirelessly with an iOS or Windows tablet or smartphone, as long as you have the BT-DUAL adaptor (which is not included and sets you back around 40 bucks). However, while desktop computers recognize the TAE Core as a Bluetooth-enabled device, you cannot use the unit wirelessly with those machines. Instead, you have to connect the TAE Core via USB. In a perfectly ordered world, that’s not a big problem. But if you use the TAE Core in a small studio—where one less cable is one less headache—or you prefer to interface with the TAE Core app on a desktop where you can toggle fast and easily between large, multi-track sessions and the app, the inability to work wirelessly on a desktop can be a distraction. The upside is that the TAE Core app itself is, functionally and visually, almost identical in mobile and desktop versions, enabling you to select and drag and drop virtual microphones into position, add delay, reverb, compression, and EQ effects, choose various cabinets with different speaker configurations and sizes, and introduce new rigs and impulse responses to a tone recipe in a flash. And though the TAE Core app lacks some of the photorealistic panache and configuration options in the OX app, the TAE Core’s app is just as intuitive.Less Is More
One nice thing about the TAE Core’s more approachable $699 price is that you don’t have to feel too bad on nights that you “underutilize” the unit and employ it as an attenuator alone. In this role, the TAE Core excels. Even significantly attenuated sounds retain the color and essence of the source tone. Like any attenuator-type device, you will sacrifice touch sensitivity and dynamics at a certain volume level, yielding a sense of disconnection between fingers, gut, guitar, and amp. But if you’re tracking “big” sounds in a small space, you can generate massive-sounding ones without interfacing with an amp modeler and flat-response monitors, which is a joy in my book. And again, there’s the TAE Core’s ability to “expand” as well as attenuate, which means you can use the TAE Core’s 30-watt onboard power amp to amplify the signal from, say, a 5-watt Fender Champion 600 with a 6" speaker, route it to a 2x12, 4x12, or virtual equivalent in the app, and leave your bandmate with the Twin Reverb and bad attitude utterly perplexed.
The Verdict
Opting for the simpler, thriftier TAE Core requires a few sacrifices. Power users that grew accustomed to the original TAE’s super-tunable “resonance-Z” and “presence-Z” controls, which aped signal-chain impedance relationships with sharp precision, will have to make do with the simpler but still very effective stack and combo options and the “air feel level” spatial ambience control.The DC power jack is less robust. It features only MIDI-in rather than MIDI-in/-through/-out jacks, and, significantly, 70 watts less power in the onboard power amp. But from my perspective, the Core is no less “professional” in terms of what it can achieve on a stage or in a studio of any size. Its more modest feature set and dimensions are, in my estimation, utility enhancements as much as limitations. If greater power and MIDI connectivity are essentials, then the extra 600 bones for the original TAE will be worth the price. For many of us, though, the mix of value, operational efficiencies, and the less-encumbered path to sound creation built into the TAE Core will represent a welcome sweet spot that makes dabbling in this very useful technology an appealing, practical proposition.
Guitarist Dave Harrington concedes that while there are a few mile markers in the music that he and musician Nicolas Jaar create as Darkside, improvisation has been the rule from day one. The experimental electronic trio’s latest record, Nothing, which released in February on Matador, was the first to feature new percussionist Tlacael Esparza.
Taking the record on tour this year, Darkside stopped in at Nashville’s Brooklyn Bowl, where Harrington broke down his complex signal chains for PG’s Chris Kies.
Brought to you by D’Addario.
Express Yourself
Harrington bought this mid-2000s Gibson SG at 30th Street Guitars in New York, a shop he used to visit as a kid. The headstock had already been broken and repaired, and Harrington switched the neck pickup to a Seymour Duncan model used by Derek Trucks. Harrington runs it with D’Addario NYXL .010s, which he prefers for their stretch and stability.
The standout feature is a round knob installed by his tech behind the bridge, which operates like an expression pedal for the Line 6 DL4. Harrington has extras on hand in case one breaks.
Triple Threat
Harrington’s backline setup in Nashville included two Fender Twin Reverbs and one Fender Hot Rod DeVille. He likes the reissue Fender amps for their reliability and clean headroom. Each amp handles an individual signal, including loops that Harrington creates and plays over; with each amp handling just one signal rather than one handling all loops and live playing, there’s less loss of definition and competition for frequency space.
Dave Harrington’s Pedalboards
Harrington says he never gives up on a pedal, which could explain why he’s got so many. You’re going to have to tune in to the full Rundown to get the proper scoop on how Harrington conducts his three-section orchestra of stomps, but at his feet, he runs a board with a Chase Bliss Habit, Mu-Tron Micro-Tron IV, Eventide PitchFactor, Eventide H90, Hologram Microcosm, Hologram Chroma Console, Walrus Monument, Chase Bliss Thermae, Chase Bliss Brothers AM, JHS NOTAKLÖN, two HexeFX reVOLVERs, and an Amped Innovations JJJ Special Harmonics Extender. A Strymon Ojai provides power.
At hip-level sits a board with a ZVEX Mastotron, Electro-Harmonix Cathedral, EHX Pitch Fork, Xotic EP Booster, two EHX 45000 multi-track looping recorders, Walrus Slöer, Expedition Electronics 60 Second Deluxe, and another Hologram Microcosm. A Live Wire Solutions ABY Box and MXR DC Brick are among the utility tools on deck.
Under that board rest Harrington’s beloved Line 6 DL4—his desert-island, must-have pedal—along with a controller for the EHX 45000, Boss FV-50H volume pedal, Dunlop expression pedal, Boss RT-20, a Radial ProD2, and another MXR DC Brick.
