Taylor 417e Review
Sloped shoulders and a beautiful burst hint at a dreadnought classic, but inside lurks a thoroughly modern approach to flattop design.
Super-slinky and inviting playability. Balanced output across the frequency spectrum. Top-shelf build quality.
Fans of traditional slope-shouldered dreads might miss the huskier, dustier voices associated with the type.
The great guitars that Taylor produced in nearly 50 years of existence would probably justify cruising on the back of past successes. But Taylor still seems to genuinely enjoy pushing back against flattop design dogma. They’re very much at ease with the notion that their guitars are alternatives to more traditional fare and perceived in some quarters as “modern” sounding—which in Taylor’s case is generally shorthand for meticulous balance between high, middle, and low registers, immaculate intonation, and easy-on-the-engineer recordability.
Taylor’s 417e doesn’t look particularly modern at a glance. It looks fancy, certainly. But at most angles, the slope-shoulder Grand Pacific profile and tobacco sunburst finish make the Taylor look like a loving, upmarket homage to the Gibson J-45. Prominent as the J-45 influence is, it’s mostly skin deep. Taylor’s V-bracing instead ensures that the 417e tones shine with the modernity that sets many Taylors apart. And the combination of mid-century aesthetic, silky playability, and bright, lively personality make the 417e an inviting instrument that can be hard to put down.
I once heard Taylor master designer Andy Powers liken his thoughts about sound waves to the experience of watching waves from high on a bluff. When you look inside, or at a picture of a cross section of the 417e’s bracing, it’s easy to see manifestations of that sound-and-sea point of view. The back braces are angled forward toward the bass side of the instrument like breaks coming off a point. The V-bracing on the top, meanwhile, tapers back toward the endpin like the prow of a ship. It’s hard to quantify the effects of different bracing arrangements. But Powers insists that V-bracing improves volume and sustain, and generates more even harmonic response, which is already a Taylor trademark. It only takes a few strums to hear that none of those claims are a stretch.
While the combination of Indian rosewood back and sides and a Sitka spruce top guarantee snappy response in just about any well-made guitar, the 417e is pretty bright for a dreadnought. There’s a lot of high midrange, too. But none of that top-end frequency emphasis results in harshness or stridency. And for all the push in those toppier ends of the frequency spectrum, each of the highest strings exhibits contoured attack and a soft decay. In fact, there were times I felt the attack and decay were almost too civilized on the third and fourth strings. That’s a very personal observation—I’m sure most players would dig the 417e’s even response. (I frequently gravitate toward an aggressive flatpicking touch and certain “ugly” sounds on an acoustic.) Whatever your approach, the combination of soft attack, extra sustain, and gentle decay results in great balance—almost as if you put studio compression on a recording of the instrument.
The 417e’s capacity for sustain, meanwhile, pairs nicely with its capacity for volume. While individual notes don’t always bloom the way they do on some dreadnoughts, the 417e’s sustain means there is room to let notes linger in space. That’s the kind of dynamic that can reshape a songwriter’s compositional perspective. It also makes the 417e a great fingerstyle dread—an animal not often seen nor heard in the wild.
It almost gets boring talking about the construction quality of high-end Taylor instruments, because I never see one that’s anything less than immaculately put together. The 417e is more of the same. Go ahead, look it over with a microscope. You’re not likely to find an obvious flaw inside or out. You should expect as much for nearly $3k, and the 417e delivers. Some small details, like the inlay and rosette, may be just non-traditional enough to put off purists, but the deviations from old-school ways are subtle and distinctive. Some standard Taylor features, like the plastic truss-rod cover, seem a little cheap given the top-shelf price. I also wouldn’t mind seeing the controls for the excellent Expression System 2 electronics moved to a less obtrusive location like the soundhole, but there’s no questioning how easy they are to see and use in a performance situation.
Players that gravitate to the 417e in part for its handsome, J-45-like slope-shoulder profile and pretty tobacco burst finish should expect a guitar that sounds very different than the old Gibson workhorse. It’s louder, brighter, and less dusty. And for a lot of players, the marriage of traditional slope-shoulder style and a balanced-but-high-mid-forward voice will be a winning one. It’s a very forgiving guitar in recording situations. The playability is as nice as you will find on a flattop, and its dynamic and touch-sensitive qualities combine with its volume and headroom to make it well-suited to nuanced fingerstyle every bit as much as hard and heavy strumming. Such range makes the 417e a great performance instrument and helps justify the premium price. And if the 417e’s convergence of “now” tones and mid-century American style suits your own, it will not be hard to extract every penny of that investment from this beautiful and beautifully made guitar.
Taylor 417e-R Demo | First Look
Taylor 417e-R 14 Fret Acoustic-electric Guitar - Tobacco Sunburst
A Crash Course in Capos
Here's a quick guide on how to get the most out of your capo.
What is a Capo?
A capo is a device that changes the tuning of the open strings on your guitar. These devices allow you to raise the pitch of any (or all) of the open strings so you can play in different keys much easier.
Updated USA NS basses combine the most popular elements of Spector’s Brooklyn, Kramer, and modern Woodstock eras while expanding the line with new, player-focused options.
Spector announces the release of its updated USA NS series of basses crafted in the new Spector USA Custom Shop facility outside of Woodstock, New York. These iconic basses remain faithful to the intent of the original instruments while combining the most popular design elements of their nearly 50-year history, an expanding menu of player-focused options, and the increased consistency of modern manufacturing techniques.
These basses boast classic, player-favorite options, such as body contours, our proprietary bridge, and the custom appointments like matching headstocks, all drawn from Spector’s famed Brooklyn, Kramer, and modern Woodstock eras. They are also available with newer options or upgrades, including modern or vintage pickup spacing, improved fingerboard tapers, standard and thin neck profiles, and premium electronics and preamps.
In addition to the new basses, Spector has made significant investments in the brand's future with their new USA Custom Shop near Woodstock, New York. While maintaining tried and true hand-building methods, the facility harnesses modern manufacturing technology, such as 3D modeling, and overhauled CNC programming to foster growth and create more consistent and accurate versions of its flagship instruments.
Spector USA NS-2 Bass Guitar - Hyper Violet Matte, Sweetwater ExclusiveSWX USA NS-2, Hyper Vlt Mtt
Spector Marketing Manager Jeff Shreiner explains, “This new NS Revision project aims to incorporate the “best of” Spector’s storied history, all while remaining true to Ned Steinberger and Stuart Spector’s original 1977 design. It represents the first major project implemented by the new team at Spector and sets forth a standard for the future of the NS design.”
For more information, please visit spectorbass.com.