Bogner's beastliest amp is made miniature—and still slays.
Excellent sounds in a portable and very affordably priced package.
A footswitchable clean channel and onboard reverb would make it perfect.
$329
Bogner Ecstasy Mini
bogneramplification.com
The original Bogner Ecstasy, released in 1992, is iconic in heavy rock circles. Though it was popularized and preferred by rock and metal artists (Steve Vai and Brad Whitford were among famous users), its ability to move from heavy Brit distortion to Fender-like near-clean tones made it appealing beyond hard-edged circles. Even notorious tone scientist Eric Johnson was enamored with its capabilities.
At nearly $4K, a new 100-watt Ecstasy is out of reach for a lot of players. But the new Ecstasy Mini, a 30-watt, class-D, solid-state amp that weighs less than four pounds, does a surprisingly great job of capturing the original Ecstasy's essence in a tiny, portable package
Mini Monster
The Ecstasy Mini comes in a package small enough to be mistaken for a shoebox. Don't be fooled by the diminutive size, though. It's a badass little screamer that can rip heads off. It can also play it cool: Even though it's based on the original Ecstasy's mighty high-gain red channel, the Mini still moves between screaming hot lead tones and near-clean sounds with relative ease.
The control panel is pretty straightforward. There are six chicken-head knobs for volume, presence, treble, middle, bass, and gain. Above the knobs are four mini toggle switches that help you shape the amp's tone and feel in more specific ways. There's a variac mode that approximates the function of a variable voltage transformer—reducing headroom and producing cool takes on Eddie Van Halen's brown sound. A gain switch lets you choose between a plexi-type sound or a modern, ultra-high gain setting, and a mid-frequency switch lets you choose which midrange band (800 Hz, 1.6 kHz, or 3.2 kHz) is shaped with the mid control. A pre-EQ switch, meanwhile, provides three baseline voices ranging from relatively mellow to bright. There's also an effects loop on the back of the amp for patching in effects like reverb and delay. The amp's 24V power supply is universal and the amp can be used anywhere around the world without a step-up transformer.
The Ecstasy Mini's build quality is excellent. Throughout my test—even with the volume and gain cranked—the amp was impressively quiet. With guitar volume at zero, you probably wouldn't even know that a raging amp is sitting idle, ready to pounce.
Lethal Low Gain, Hellacious High Gain
I started my tests in low-gain mode with the gain knob at noon. Even at these less aggressive settings, I could feel the room rattle when I hit an A chord. There's a lot of available volume and single notes really ring with sustain at these settings—particularly when the variac setting is on. The amp is a surprisingly great match for blues-rock and pop-rock at these settings. (I was even compelled to have a go at Steve Lukather's solo and tone from Toto's "Rosanna." It sounded pretty spot-on.)
Even at less aggressive settings, I could feel the room rattle when I hit an A chord.
High-gain settings transform the amp from simply muscular to monstrous, reminding me why the original Ecstasy is so coveted. I tuned my Schecter T-7 7-string's low string down to A and played power chord riffs with the gain around 1 o'clock, the variac off, and tone knobs all at noon. Here, the Ecstasy Mini was razor-sharp and never flabby. Picking response feels fast, and even low open 7th string tones were crisp and tight.
Switching to the variac setting brought a noticeable drop in volume, a bit more warmth, and spongier, more compressed response. In general, I preferred the variac setting for solos. Obviously, it's less well suited for ultra-precise single-note runs and detuned rhythms, but a high-mid boost from the pre-EQ's B2 switch helps solos cut through more effectively without sacrificing too much of the forgiving sag you get via the variac mode.
Time to Clean Up
For a single-channel, high-gain amp, the Ecstasy Mini does a respectable job of generating clean sounds at gigging volume. With the gain knob around 7 o'clock and the mini toggle for gain in low mode, single-coils readily produce cleaner tones at lower guitar volumes. Humbuckers introduce more grit, but you can still hear lots of individual note clarity and effectively move from clean-ish to dirty sounds via picking and volume control dynamics. The amp's dynamic response is impressive at the highest gain settings, too. And though you won't get pure clean tones here, active adjustments of guitar volume make the amp capable of cool, dramatic shifts in mood, tone, and intensity.
The Verdict
Bogner's Ecstasy Mini is versatile for an amp so clearly designed for maximum power. It will sound huge and hang with a loud band when miked through a PA. But you can also stow it in a gig bag as a backup, use it in the studio, or at home if you're tight on space. It may not rival an all-valve 100W Ecstasy for body, richness, and sheer power. But unless you're playing Madison Square Garden, there's no reason it can't cover most of your gigging needs. The Ecstasy Mini is a killer high-gain amp with a street price that's not much more than a pedal. And that combination of power and value makes it pretty hard to beat.
- Bogner Panama Amp Review - Premier Guitar ›
- Quick Hit: Bogner Ecstasy Blue Mini Review - Premier Guitar ›
- 10 High-Gain Lunchbox Amps That Will Melt Your Face - Premier ... ›
Day 12 of Stompboxtober means a chance to win today’s pedal from LR Baggs! Enter now and check back tomorrow for more!
LR Baggs Session DI Acoustic Guitar Preamp / DI
Inspired by the LR Baggs Handcrafted Video Sessions and our experience in some of Nashville’s great studios, the Session Acoustic DI brings our signature studio sound to your live rig. The Session DI enhances your acoustic pickup and imparts the rich sonic character that you’d expect from an experienced audio engineer using some of the world’s finest studio gear. We’ve captured this studio magic and put it into a compact, easy-to-use DI that will transform your live sound.
Here, our XAct Tone Solutions columnist walks you through every aspect of how to put together your ideal pedalboard.
A well-organized pedalboard may be just as crucial to a guitar player’s setup as the guitar itself. Even the most seasoned professional can be completely sabotaged by a malfunctioning or poorly performing pedalboard setup. Things like layout and logistics may seem trivial until that boost pedal is just far enough out of reach to cause your crunchy, soaring solo to be decidedly quiet and squeaky-clean.
The process of designing and arranging a pedalboard can go far beyond simply placing pedals in a straight line and patching them together from junk-drawer cables; from conception to completion, a pedalboard setup rewards careful planning.
Before diving into the physical setup of your pedalboard, start by assessing your current collection of pedals and any potential additions. Start with the bare minimum of devices needed for your current repertoire, whether they be for a gig or at-home play. What types of effects do you need to cover the style of music you’re looking to perform? You’ll likely want to cover the basics of tuning, overdrive, distortion, boost, and delay, but you may need specific devices to cover unique parts in cover songs or personal compositions. A certain modulation for this bridge, a certain reverb for that intro. While it is impossible to completely future-proof your rig, you can make sure that you attempt to account for changing needs.
Next, you’ll need a platform suitable for holding the pedals you’ve chosen. Companies like Pedaltrain and Creation Music Company have a selection of pedalboards in various sizes. These can include bags or cases to fit. There are custom-sized pedalboard options available, but they and the associated cases/bags usually cost more due to their bespoke nature. Consider your needs when selecting a bag or case to protect your pedalboard. If you seldom leave the house, you might just need a well-made gig bag. These can even be sufficient for semi-professional playing, so long as you or a trusted ally are carrying it and responsibly packing it away. If you need something more durable, cases like those from Pedaltrain are sufficient for many touring arrangements. Bear in mind, they are lightweight in construction with a minimal amount of lateral padding. For heavy touring, a real ATA-style case will be required. Their stalwart construction and thicker internal padding will stand up to long-term touring abuse.
“Even the most seasoned professional can be completely sabotaged by a malfunctioning or poorly performing pedalboard setup.”
Pedalboard planning and design can be frustratingly iterative. As a result, you may begin with picking all the pedals you’d love to have, but then the board you’ve picked won’t quite fit everything. If so, you might go back a step, adjust the pedal choices, and start to move forward again. Similarly, power requirements can push and pull on your pedal selections. Pedals require consistent power at specific voltages and amperages to function correctly. If a supply does not have the necessary power ports, you may have to eliminate a certain pedal or change the power supply scheme altogether. Furthermore, the supply may or may not fit under the pedal mounting surface of the pedalboard type you’ve selected. Again, this may cause an adjustment to previous decisions that must be propagated.
Cabling carries your signal between your pedals and out to your amp, so you’ll want to make sure you have something of sufficient quality. Solderless cable systems allow you to make custom length cables, but may not be as long-lasting as soldered cables. Soldered cables can be a DIY affair if you have the inclination and time to develop enough expertise. In lieu of that, companies like BTPA and Goodwood Audio can make excellent soldered cables in custom lengths.
Another key thing to keep in mind is that signal order doesn’t necessarily dictate the physical location of your pedals. I recommend arranging your pedals based on frequency of use. Pedals you use most often should be positioned where they are easily accessible during performance. If you are right-footed, this may mean low and to the right. Pedals used less frequently can be placed further away or in less convenient spots. Pedals used in fast-breaking, small sections of songs may not be needed frequently, but must be available quickly when needed. Ensure that you can comfortably reach and engage each pedal as you play the required material.
A well-thought-out pedalboard layout and implementation can significantly enhance your performance and playing experience. Like practice and rehearsal, it may not be the most glamorous bit of guitar rudiments, but with the right approach, your pedalboard can become a powerful tool that complements your musical journey.
Our columnist stumbled upon massive success when he shifted his focus to another instrument. Here, he breaks down the many benefits you can get from doing the same.
A while back, I was doing a session for the History Channel at Universal in Hollywood, California. After the session, I sheepishly admitted to some of the other session players that I was really getting into bluegrass and specifically the square-neck resonator, or dobro guitar. Now, as a progressive-jazz guitarist, that was quite a revelation. After some classic lines from the Burt Reynolds movie, Deliverance, another friend said he also was getting into mandolin and banjo.
Long story short, we put together a band, Honeywagon (which is the vehicle that cleans out the toilets under actors’ trailers on movie sets), started playing bluegrass around L.A. (up and down the Sunset Strip), and three months later, we had a record deal. We sang three-part harmony, made “deranged” covers of songs by famous artists, produced it ourselves, and sold well over 1.5 million albums and counting, and played all over the world.
What started all of that was my love for Jerry Douglas’ dobro playing. It’s so vocal, and his timbral range! You see, music is a universal language that transcends cultural, social, and linguistic boundaries. And learning another instrument is a gateway to unlock levels of self-expression, creativity, and emotional exploration you might not even be aware of.
I don’t believe in “mastery”—there are always deeper levels to discover—so let me say that while gaining significant proficiency on one instrument is a huge achievement, the benefits of learning to play at least one other instrument are immense. It will enhance your musical skills, cognitive abilities, and personal growth. Tighten up your belts, the Dojo is now open.
Enhancing Musical Skills and Understanding
Learning multiple instruments can profoundly deepen a musician’s understanding of music theory, composition, and performance. Each instrument has its unique challenges, techniques, and approaches that require you to adapt and learn new skills. For instance, a guitarist transitioning to the piano will need to understand new techniques, two-hand interdependence, chord shapes, and different ways of producing sound.
New instruments also allow you to appreciate different timbres, textures, and roles within an ensemble. A drummer who learns to play the bass, for example, will gain a deeper understanding of rhythm and timing, as they experience how their drumming interacts with the bassline. This cross-instrumental knowledge can lead to more creative compositions and more nuanced performances, as musicians become adept at thinking from multiple musical perspectives.
Cognitive Benefits
The cognitive benefits of playing an instrument are widely documented. Learning to play an instrument can improve memory, enhance coordination, and increase cognitive flexibility. When a musician learns to play an additional instrument, these cognitive benefits are amplified. The process of learning new fingerings, reading different clefs, and adapting to various physical requirements engages the brain in unique ways, promoting neuroplasticity and cognitive growth.
“Music is a universal language that transcends cultural, social, and linguistic boundaries.”
Moreover, playing multiple instruments can improve problem-solving skills and adaptability. We often face challenges when learning a new instrument, but successfully navigating these challenges builds resilience and perseverance—skills that are valuable both in music and in other areas of life.
Emotional and Personal Growth
Music is not just a technical skill, it is also a deeply emotional and expressive art form. Learning to play multiple instruments can enhance your ability to express and connect with your rich emotions. Each instrument has its own voice and character, offering different ways to convey those emotions and tell stories. A violinist who learns to play the flute, for instance, may discover new ways to express lyrical melodies or subtle nuances in phrasing. In addition, taking on another instrument can boost confidence and self-esteem.
Expanding Musical Opportunities
It can also open you up to a wide range of musical opportunities. Musicians who can play multiple instruments are often more versatile and in-demand for various musical projects. The more you’re able to adapt to different genres, styles, and ensemble settings, the more valuable a collaborator you’ll be in bands and recording sessions.
Which One?
Ultimately, I’ve found that the instruments I can play besides the guitar have helped me deepen my connection with music and discover new ways to express myself. If this article is resonating with you, I would suggest choosing your new instrument based around what excites you the most. Is it bass, keys, pedal steel (one of my personal faves), or modular-synth programming? The possibilities are as wide as your mindset. In “Song of Myself, 51,” Walt Whitman said, “I am large, I contain multitudes.” Namaste.John Mayer Silver Slinky Strings feature a unique 10.5-47 gauge combination, crafted to meet John's standards for tone and tension.
“I’ve always said that I don’t play the guitar, I play the strings. Having a feeling of fluidity is so important in my playing, and Ernie Ball strings have always given me that ability. With the creation of the Silver Slinky set, I have found an even higher level of expression, and I’m excited to share it with guitar players everywhere.”
— John Mayer
hese signature sets feature John’s previously unavailable 10.5-47 gauge combination, perfectly tailored to his unique playing style and technique. Each string has been meticulously crafted with specific gauges and core-to-wrap ratios that meet John’s exacting standards, delivering the ideal balance of tone and tension.
The new Silver Slinky Strings are available in a collectible 3-pack tin, a 6-pack box, and as individual sets, offered at retailers worldwide.
"Very few guitarists in the history of popular music have influenced a generation of players like John Mayer. For over 25 years, John has not only been a remarkable artist but also a dear friend to the Ernie Ball family. This partnership represents our shared passion for music and innovation, and we can't wait to see how John’s signature Silver Slinky strings continue to inspire guitarists around the world.”— Brian Ball, CEO of Ernie Ball
Product Features
- Unique gauge combination: 10.5, 13.5, 17.5, 27, 37, 47
- John’s signature gauge for an optimal balance of tone, tension, and feel
- Reinforced Plain Strings (RPS) for enhanced tuning stability and durability
- Custom Slinky recipes tailored to John’s personal preferences