A union of fuzz-motivated minds yields a beastly wah.
A beautiful marriage of fuzz and wah. Searing, focused fuzz tones. Pairs perfectly with PAF-style humbuckers. Quality construction.
Internally mounted pots for fuzz volume and gain. Narrow sweep may suit pedal but will leave some players longing for more range.
$229
Dunlop Cry Baby Daredevil Fuzz Wah
jimdunlop.com
I first got to know Daredevil Pedals’ Johnny Wator because I recognized a fellow Stooges fan. As you’d expect from any pedal-building acolyte of Ann Arbor’s finest, Wator’s wares explored the filthier side of the effects spectrum: raspy silicon fuzzes, dirty delays, and the sound of cocked wahs. And for players drawn to all things punky, scuzzy, and dragged through the gutter, Daredevil’s roster is, forgive the pun, a funhouse. It’s hard to imagine a bunch of folks more sympathetic to Wator’s aims than Dunlop. They harbor many maniacs with a deep affinity for the heavy and unhinged. And the fruit of their collaboration with Wator, the Cry Baby Daredevil Fuzz Wah, is as beautifully nasty as you would dare imagine.
The Cheetah Growls in Chrome
Given a wah pedal’s extroverted musical mission, I think they should be stylish things, too. Wator and Dunlop seem to feel the same. The treadle is adorned with a crown logo that would make a killer hood or grille ornament. It’s also chrome plated in the style of vintage Colorsound and Vox wahs. Even the side-mounted toggle switch that activates the fuzz is mounted against a suitably glam steel lightning bolt.
The circuit is a unique design based on custom-order fuzz wahs that Wator built in his Chicago shop, and in this mass-produced iteration it is very carefully put together. The circuit itself is fastidiously laid out on through-hole circuit board, and switches for both the wah and the fuzz are enclosure mounted, making replacement and repair easy. The circuit board is also home to two small knobs that control fuzz gain and volume. It’s too bad that the two controls are internally mounted given the profound way that they can shape the pedal’s tone and functionality. And considering their placement on the outboard edge of the circuit board, you can imagine how the knobs could be mounted on the enclosure’s exterior. On the other hand, such a feature would have driven production costs skyward, making the reasonable $229 price less appealing.
Filter the Fuzz Fantastic
Wator’s conceptual departure point for the Daredevil Fuzz Wah was a union of the old Clyde McCoy Cry Baby sound and his own LSD Fuzz, which is a sort of high-octane derivative of the Mosrite Fuzzrite circuit. On its own, the wah exhibits pronounced midrange-y leanings, which can drive the fuzz to manic heights. I have wahs that are creamier sounding, which is lovely for soul ballads and mellow psychedelia. The Daredevil, however, comes on relatively strong. There’s a distinct volume jump when you click it on. And the taper from the heel down position to biting midrangey zones can seem both fast and steep. Wator deliberately made the tone sweep of the Daredevil’s rocker shorter and narrower—a quality he admires in Cry Babys from the mid to late 1970s. While this filtering curve can make the Daredevil feel less subtle and sound a little more nasal, there are abundant shadings to explore in the middle and higher ranges of the sweep. It can give a Stratocaster a lot more body and attitude in a solo, and it is a beautiful match for PAFs, which can mellow its more aggressive edges.
Everything from Stones-y garage folk and Stooges punk to My Bloody Valentine walls of sound can be awakened by the way the Daredevil lunges for the jugular.
Kicking on the fuzz, meanwhile, is an electric thrill. Fuzz tones in the toe-down range are white hot and focused. And a lot of players that quest for the most perfectly vicious mid-’60s fuzz will find it here. At many rocker settings, the fuzz buzzes and explodes with feral fury. But it’s the way it can scythe through a mix that make it feel like the ultimate ’60s fuzz, and everything from Stones-y garage folk and Stooges punk to My Bloody Valentine walls of sound can be awakened by the way the Daredevil lunges for the jugular.
While I generally kept the fuzz gain at maximum, I kept the master volume much lower, because at maximum output the DareDevil is blistering hot and very, very loud. There are benefits to this volume. Toying with feedback at the higher output levels, for instance, is a joy and broadens the palette of the pedal, your guitar, and an amp. Navigating these feedback zones necessitates a bit of a dance with your amplifier as you find just-right proximities for coaxing certain overtones. But even minor mastery of the technique yields thrilling results, and there are copious, unexpected tone colors to source.
The Verdict
The Daredevil Fuzz Wah is not a mere branding exercise or some insignificant twist on an existing Cry Baby design. It’s a cool, idiosyncratic, if slightly aggressive, wah paired with a deadly take on a silicon Fuzzrite. Can you link up any wah and a Fuzzrite clone and achieve the same effect? My attempts to do so yielded a much less cohesive and less pleasing take on the sound Wator concocted here. Because the Daredevil is engineered to yield a very specific sonic sum, evaluation scores should be considered fluid based on musical predilections. If you like confrontational, retro-punky assault, go with my scores here. If you like smoother, more predictable outcomes, you may want to round down a bit on the tone side. But if you’re keen to escape wah convention or love the emotive, unshackled wah styles of Ron Asheton, Eddie Hazel, or Mick Ronson, the Daredevil Fuzz Wah is a perfect vehicle for cutting loose.
Dunlop Cry Baby Daredevil Fuzz Wah Demo | First Look
It’s Day 26 of Stompboxtober! Today’s pedal from MXR could be yours—enter now and return tomorrow for more!
MXR M309 Joshua Ambient Echo Pedal
The MXR Joshua Ambient Echo is your ticket to iconic sonic sanctuaries, featuring a foundation of carefully concocted tones and textures, highly customizable delay, and other features to help you craft soundscapes worthy of tonal trips out of the ’60s and ’70s and ethereal ambience from the ’80s.
This pedal requires 9 volts (300mA) and can be powered by the Dunlop ECB003 9-volt adapter or the MXR Iso-Brick Pro, Iso-Brick, and Mini Iso-Brick power supplies. This pedal cannot be powered by a battery.
Vintage-style reverb, tremolo, and vibrato sounds abound in a 3-in-1 stomp that might be the only box you need.
The Keeley ZOMA combines two of iconic amp effects—tremolo and reverb—into one pedal.
Key Features of the ZOMA
● Intuitive Control Layout: Three large knobs give you full control over Reverb Level, Tremolo Rate,and Depth
● Easy Access to Alternate Controls: Adjust Reverb Decay, Reverb Tone, and Tremolo Volume withsimple alt-controls.
● Instant Effect Order Switching: Customize your signal path. Position tremolos after reverb for avintage, black-panel tone or place harmonic tremolo before reverb for a dirty, swampy sound.
● True Bypass or Buffered Trails: Choose the setting that best suits your rig.
Three Reverb and Tremolo Modes:
● SS – Spring Reverb & Sine Tremolo: Classic spring reverb paired with a sine wave tremolo for that timelessblack-panel amp tone.
● PH – Plate Reverb & Harmonic Tremolo: Smooth, bright plate reverb combined with swampy harmonictremolo.
● PV – Plate Reverb & Pitch Vibrato: Achieve a vocal-like vibrato with ethereal plate reverb.
Reverb: Sounds & Controls
● Spring Reverb: Authentic tube amp spring reverb that captures every detail of vintage sound.
● Plate Reverb: Bright and smooth, recreating the lush tones of vibrating metal plates.
● Reverb Decay: Adjust the decay time using the REVERB/ALT SWITCH while turning the Level knob.
● Reverb Tone: Modify the tone of your reverb using the REVERB/ALT SWITCH while turning the Rate knob.
Tremolo: Sounds & Controls
● Sine Wave/Volume Tremolo: Adjusts the volume of the signal up and down with smooth sine wavemodulation.
● Harmonic Tremolo: Replicates classic tube-amp harmonic tremolo, creating a phaser-like effect withphase-split filtering.
● Pitch Vibrato: Delivers pitch bending effects that let you control how far and how fast notes shift.
● Alt-Control Tremolo Boost Volume: Adjust the boost volume by holding the REVERB/ALT footswitch whileturning the Depth knob.
The ZOMA is built with artfully designed circuitry and housed in a proprietary angled aluminum enclosure, ensuring both simplicity and durability. Like all Keeley pedals, it’s proudly designed and manufactured in the USA.
ZOMA Stereo Reverb and Tremolo
The first sound effects built into amplifiers were tremolo and reverb. Keeley’s legendary reverbs are paired with their sultry, vocal-like tremolos to give you an unreal sonic experience.
By now, we’re all familiar with the many options out there for amp modeling. Mic modelers are another reliable asset to digital recording tech, and can rapidly grow your inventory with just a few clicks.
As guitarists, we’re very aware of amp-modeling and profiling technologies, such as the Line 6 Helix, Fractal Axe-Fx, Neural DSP Quad Cortex, and Kemper Profiler. While our bases are covered for these (with modelers available for every “holy grail” amp under the sun), we are still missing another vital area of the recording process—microphones—for the acoustic instruments and vocals we might want to capture.
What if we could record them using holy-grail-modeled microphones? This month, let’s evaluate microphone modeling to help you make better-sounding recordings. Tighten up, the Dojo is now open.
The Sincerest Form of Flattery
Microphone modeling is an intriguing advancement in recording technology, offering great flexibility and possibilities for musicians, producers, and engineers. Makers like Slate Digital, Antelope, and Antares make many offerings, from hardware to software.
Universal Audio’s Sphere DLX ($1299 Street), LX ($799), and their six new Standard Mic series have impeccably modeled classic mics, and when coupled with their classic mic pre and compressor plugins, you can enjoy the same highly coveted mic chains appreciated the world over.
How It Works
The technology behind microphone-modeling systems relies heavily on convolution and impulse response techniques. These techniques involve capturing the unique sonic fingerprint of a microphone by recording its response to a wide range of frequencies and sound pressure levels. The immediate benefit is that this means you can grow your mic locker exponentially and gain access to a wide range of legendary microphone tones and textures all from a single mic! Most modeling microphones are usually either small- or large-diaphragm, multi-pattern, condenser microphones that are capable of capturing a wide frequency range and dynamic response. By adding other modeling mics, you can record in stereo or surround, and/or record multiple instruments at a fraction of the cost of owning multiples of the modeled mics themselves.
A Wealth of Options
One significant advantage of mic-modeling systems is their ability to offer a vast array of microphone options within a single session instead of having the time-consuming duty of swapping them out to achieve different sounds. With a modeling system, you can switch between different mic models instantly and audition various mics to find the perfect tone for the recording.
“The same vintage microphone can sound different on different days depending on temperature, humidity, and the voltage from the wall.”
Another lovely bonus is that microphone-modeling systems also offer the ability to swap microphone characteristics after the recording has been made! Want to swap your AKG C12 for a Neumann U 47 long after the recording session is over? No problem! This is especially useful when the initial microphone choice may not have been ideal or when the production requires a different tonal character than originally intended.
Weighing the Pros and Cons
Some audio purists argue digital emulation can’t truly replicate the sound of a physical microphone, especially when it comes to vintage models that have unique characteristics developed over decades of use. The subtleties of these microphones and their aging components shape the way they interact with different preamps and compressors.
After making over a hundred records at Blackbird over the last eight years, I’ve grown quite familiar with a good portion of our 1,800-plus vintage mics, like Telefunken 251s, AKG C12s, Neumann U 47s and KM 84s, Shure SM7s and SM57s, RCA 44s and 77s, and Royer R-121s. These are the very same mic models that most modeling mics are trying to capture. But experience has taught me that not all microphones sound identical even if they are the same make and model (and year). Also, the same vintage microphone can sound different on different days depending on temperature, humidity, and the voltage from the wall (that’s why Blackbird has its own regulated power and all the studios strive for consistent temperature and humidity year-round).
For home studios and smaller production environments, microphone-modeling systems can be a game changer. You’ll get a wide range of high-end microphone sounds without the need for a large microphone collection, and the ability to change microphone models after the fact gives budding producers and engineers greater confidence and flexibility in their work.
In reality, most users find that the convenience, cost savings, and versatility offered by modeling systems far outweigh any potential shortcomings. Finally, keep in mind that even though the mic “profile” you choose (U 47, U 67, SM7, etc.) will be consistent day in and day out, the modeling mic itself is also still a mic and will require you to be mindful of these same issues I mentioned above in order for your mic “profile” to be as accurate as possible.
Until next time, namaste.