Big time processing power in a reverb that you can explore for a lifetime.
An astoundingly lush and versatile reverb of incredible depth and flexibility. New and older BigSky algorithms included. More elegant control layout and better screen.
It’s pricey and getting the full use out of it takes some time and effort.
$679
Strymon BigSky MX
strymon.net
Strymon calls the BigSky MX pedal “one reverb to rule them all.” Yep, that’s a riff on something we’ve heard before, but in this case it might be hard to argue. In updating what was already one of the market’s most comprehensive and versatile reverbs, Strymon has created a reverb pedal that will take some players a lifetime to fully explore. That process is likely to be tons of fun, too.
Grinding out impressive DSP power via an 800 MHz tri-core ARM processor with 32-bit floating-point processing, the BigSky MX introduces seven brand-new reverb algorithms, allows users to load any compatible convolution reverb (or impulse response) as well as to use two reverbs simultaneously—in series, parallel, and split—plus it delivers several other mind-bending features. Given this wealth of goodies, it’s impossible to test and discuss every sound and function, but what we heard is exciting.
Infinite Space
The updated MX will look very familiar to those who know the original BigSky. The form factor is nearly identical, though the MX is a bit larger. Its control interface is similar too, albeit rearranged into a single row of knobs that looks more balanced. Rotary controls include decay, pre-delay, tone, mod, parameter 1, parameter 2, and mix. A value knob enables effect-level manipulation on the larger, clearer OLED screen. It also allows you to select between the older or “classic” algorithms from the original BigSky and the seven new ones. Three footswitches allow for preset selection, bank up or down (two switches pressed together), and an infinite hold/sustain switch that’s always available. The rotary “type” knob in the upper-left corner spins between 12 basic reverb voices. As with most things Strymon, many of these controls are multi-function.
Also very Strymon-like are the top-mounted, 5-pin DIN MIDI I/O connections, which come in handy if you want to maximize the pedal’s potential in a MIDI-controlled rig. But you can access more than enough right from the pedal itself to satisfy the needs of most standard pedalboard-based setups. A USB-C port enables computer connection for MIDI control via that route, use of the Nixie 2 editing app, or firmware updates.
There are stereo jacks for both input and output, plus a multi-function 1/4" TRS/MIDI expression jack for use with a further range of external controllers. The standard center-negative power jack requires a DC supply offering at least 500 mA of current draw.
It is utterly hypnotic and addictive once you settle in and work a little more intuitively.
Sky’s the Limit
The BigSky MX was, initially, a bit mind-boggling on account of the seemingly endless possibilities. But it is utterly hypnotic and addictive once you settle in and work a little more intuitively. Suffice it to say, the core quality of the reverb sounds themselves are excellent, and the sheer variety is astounding. Beyond the standard emulations, I really dug several permutations of the cloud reverb, the chorale mode (which adds tenor and baritone harmonizing tones), and bloom mode (which generates deep synthesizer-style pads), and I could have gotten lost in any of these for hours if there wasn’t so much more to explore. Among the highlights: There is now an option to pan reverbs across the stereo field. The MX also uses audio design concepts borrowed from tape delays to create rhythmic pattern-based reverbs, which is an excellent compositional tool.
The Verdict
This latest evolution of the already impressive and super-capable BigSky is the kind of pedal that could cause you to disappear into your basement studio, never to return. The sounds are addictive and varied and can be configured in endless creative ways. The programmability and connectivity are also superb. Additionally, the new algorithms weren’t added at expense of the old BigSky algos. There’s no doubt that it will be flat-out too much horsepower for the guitarist that needs a few traditional sounds and, perhaps, a few more spacious options. And it would be interesting to know what percentage of the pedal’s customers end up being synth artists, engineers, or sound designers of one kind or another. If you’re the kind of guitar player that enjoys stretching the sound and capabilities of your instrument as far as they will go, the BlueSky MX will gladly ride along to the bounds of your imagination. It may test the bounds of your budget, too. But in many ways, the BigSky MX is as much a piece of outboard studio gear as a stompbox, and if you’re willing to invest the time, the BigSky MX has the goods to pay you back.
- Rig Rundown: Jason Isbell & Sadler Vaden [2024] ›
- Strymon Releases the Iridium Amp & IR Modeler ›
- Strymon Iridium Review ›
Featuring the SansAmp section, Reverb/Delay/Roto effects, and OMG overdrive, with new additions like a switchable Pre/Post Boost and Effect Loop. Pre-configured for the RK Killer Wail wah, this pedal offers versatile tones and unmatched flexibility.
Since the debut of the original RK5 in 2014, Richie’s needs have changed, both on and off the road. The RK5 v3 retains the same SansAmp section, Reverb/Delay/Roto section, and Richie’sSignature OMG overdrive. New features include a switchable Pre/Post Boost to beef up drive and distortion or increase the overall volume to punch up fills and solos, along with the addition of an Effect Loop. It has also been pre-configured to provide phantom power for Richie’s Tech21 Signature RK Killer Wail wah.
The all-analog SansAmp section of the RK5 focuses on clean tones within the tube amplifier sound spectrum. It includes 3-band active EQ, and Level and Drive controls. To dirty things up, you have the flexibility of using the Drive control, and the Boost function, or you can add overdrive from the OMG section. Or all three. Each method achieves different tones. The OMG section is based upon the Richie Kotzen Signature OMG pedal, which provides a wide range of overdrive, from clean to aggressive. You can add personality to a clean amp or use it for extra punch with a dirty amp tone. Controls include Drive for the overall amount of gain and overdrive and Tone with specialized voicing for adjusting the high-end and mid-range. A Fuzz switch changes the character and attack of the overdrive to a fuzz-style tone, making it thicker and woolier.
Other features include an independent foot-switchable Reverb witha choice of large and small“room sizes;” Tap Tempo Delay, which can be transformed into a rotating speaker effect; included Tech 21 Model #DC9 universal self-adjusting 9V DC power supply, with interchangeable international prong assemblies for use anywhere in the world. Anticipated availability: January 2025
For more information, please visit tech21nyc.com.
Featuring vintage tremolos, modern slicer effects, and stereo auto-panners, the update includes clever Rate and Tempo controls for seamless syncing and morphing.
Today Kemper announces the immediate availability PROFILER OS 12.0 including the highly anticipated collection of advanced Tremolo and Slicer FX for the entire range of KEMPER PROFILER guitar amps.
The Collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever Rate and Tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values,
The new Advanced Tremolo Modules in Detail
- The Tube Bias Tremolo is the familiar Tremolo in the Kemper Profilers. Formally named "Tremolo“ and available in the PROFILERs since day one, it is a reproduction of the famous Fender Amp tremolos from the 50‘s. Placed in front of the amp it beautifully interacts with the amp distortion.
- The Photocell Tremolo dates back to the 60‘s and features a steeper pulse slope, and its width varies with the intensity.
- The Harmonic Tremolo also dates back to the 60‘s and was introduced by Fender. The low and high frequencies alternate with the tremolo rate.
- The Pulse Slicer is a modern slizer or stutter effect that will continuously transition from the smoothest sine wave to the sharpest square wave, using the "Edge“ parameter. The "Skew“ parameter changes the timing of the high level versus the low level, sometimes also called pulse width or duty cycle.
- The Saw Slicer creates a ramp like a saw wave. The saw wave has a falling ramp when "Edge“ is at full position, and a rising edge at zero position. Towards the middle position a rising and falling ramp are forming a triangle wave. The „Skew“ parameter changes the slope of the rising and falling ramp from a linear trajectory to a more convex or concave shape.
- The Pulse Autopanner and the Saw Autopanner are derivates from their respective Slicers, they spread their signals in the stereo panorama. The "Stereo“-control parameter is included in many effects of the PROFILER. Here, it introduces a novel "super-stereo" effect that lets the Autopanner send the signal well outside the regular stereo image. This effect works best if you are well positioned in the correct stereo triangle of your speakers. When you move the “Stereo” soft knob beyond the +/-100% setting, the super-stereo effect comes into place, reaching its maximum impact at +/-200%.
- A single press on the TAP button at the beginning of the bar will bring the rhythmic modulation effects, such as Tremolo or Slicer, back into sync with the music without changing the tempo. The sync will happen smoothly and almost unnoticeable, which is a unique feature. Of course, tapping the tempo is possible as well.
- Modulation Rate - The “Rate” control available in many modulation effects is based on a special philosophy that allows continuous control over the speed of the modulation and continuous Morphing, even when linked to the current tempo via the To Tempo option. The fine Rate resolution shines when seamlessly morphing from, e.g., 1/8 notes to 1/16 notes or triplets without a glitch and without losing the timing of the music.
PG's demo master quickly (and easily) drops in an H-S-S setup into his 1994 40th Anniversary Stratocaster that needed help. Find out what happens when gets his first taste of active pickups.
EMG SL20 Steve Lukather Signature Pre-wired Pickguard with 3 Pickups - Black Pearl
Barry Little’s onstage rig.
How you want to sound and what makes you happy are both highly subjective. When it comes to packing and playing gear for shows, let those considerations be your guide.
I was recently corresponding with Barry Little, aPG reader from Indiana, Pennsylvania, about “the One”—that special guitar that lets us play, and even feel, better when it’s in our hands. We got talking about the gear we bring to gigs, and Barry sent me the photo that appears with this column.
“I’m mostly old school and take quite the amp rig, and usually two or three Strats or ‘super strats,’ plus some Teles,” he wrote. “Some are in different tunings.” Barry also has a rack, built with famed guitar-rig designer Bob Bradshaw’s help, that he says holds a Bad Cat preamp bearing serial number one. For his ’70s/’80s rock outfit and his country band, this covers the waterfront.
I love Barry’s rig; it looks awesome! So … why do I feel guilty about the substantial amount of gear I take to gigs where my five-piece band will be playing a concert-length set? Onstage, my setup looks fantastic—at least to me. It’s the gear I’ve always wanted. But packed inside cases and ready to load into the Honda Odyssey with a rooftop carrier that all five of us and our instruments travel in for away dates … it seems excessive. Currently, I take three guitars: my customized reissue Fender Esquire “Dollycaster,” my Zuzu one-off Green Monster, and a Supro Conquistador, plus a 1-string electric diddley bow made from a crawfish-boiling pot. They start every show in open G octave (D–G–D–G–D–G), open D, standard tuning, and A, respectively. There’s also a Sony GLXD6+ wireless, and a pedalboard with 13 effects stomps, a tuner, and two power boxes, along with a Brown Box. That board is the launchpad for the stereo signal that runs into two Carr 1x12 combos: a Vincent and a Telstar. In addition, there’s a big black bag with spare cables, fuses, capos, strings, extension cords, microphones, straps, duct tape, and just about anything else you might need. After all that, miraculously, there is also room for my bandmates–another guitarist, bass, drums, and theremin—and their gear, plus light luggage.
I admit that’s a lot, but it used to be more—at least by the pound. In the late ’90s and early 2000s, I often played through two Marshall 4x12s with a Mesa/Boogie Duel Rectifier Trem-O-Verb on one and a ’72 Marshall Super Lead atop the other. And before that, it was the Marshall with a 4x12 plus a ’66 Fender Twin Reverb. I kept a waist back-support belt in the van, but spent a decent chunk of that era living with regular back pain.
“I admit that’s a lot, but it used to be more—at least by the pound.”
Where am I going with this? Besides a desire for you to absolve me of my guilt, I feel like all of this gear is … um … necessary? It’s the recipe for the sound I want to hear, for the versatility of the material, and for me to play from my happiest place—onstage in the middle of a glorious stereo field of my own making. It’s not really about gear and it’s not about somebody else’s definition of practicality. It’s about joy. Ideally, you should be able to bring whatever gives you joy to a gig. Period.
Sure, naysayers will yap that after a guitar, a cable, and an amp, nothing else is necessary. And on a certain misguided, intolerant level, they are right. We can all play a show with just the basics, but I, for one, don’t want to—unless maybe it’s a solo gig. Neither did Jimi Hendrix. There is a universe of tones out there waiting to be discovered and explored. There are improvisational paths that only a pedalboard can suggest. (Of course, if you’re playing a small stage, traveling in too tight quarters, or claiming turf that impinges on bandmates, those considerations apply. “Be kind” is a good rule of thumb for life, including band life.)
Remember, the naysayers are not in your bones, and onlyyour bones know what you need and want. Don’t let the voices—even in your own head—nag you. (I, too, must take this advice to heart.) Bring whatever you want to bring to gigs, as long as you can get it there. Do it guiltlessly. Have fun. And listen to your bones.