​Introducing the Red Sea, an all-analog signal routing matrix, designed for countless stereo and mono signal path routing options. The Red Sea was born out of the vision to provide complex signal routing options available to the live/performing musician, that up until now, are only found in a studio mixing environment. The Red Sea has accomplished this in a compact, easy-to-use, and cost-effective solution.

Wet | Dry | Wet

The Red Sea gives you the ability to run a FULL Stereo wet dry wet rig using only 2 amps or just 2 signals to the FOH, while also giving you complete control over your Wet & Dry mix! Use the Blend knob to control the overall mix between stereo wet effects and mono dry/drive signals.

Stereo Dual Amps

Run dual amp modelers if full stereo w/ stereo effects. Gone are the traditional ways of one amp in the Left channel and another in the Right channel. Now use the Red Sea to seamlessly blend between two separate amps in true stereo. Think of this as a 2-channel amp where you can blend anywhere between both amps.

Stereo Parallel FX

Red Sea has two independent stereo FX loops. Use each FX loop to run stereo delay's and reverb's in parallel, where each effect does not interact with each other. Huge soundscapes can be achieved with washy reverbs and articulate delay repeats while being able to blend between each FX loops mix level.

The Red Sea can also do the following routing options:

• Wet | Dry utilizing a single amp
• Clean Wet | Dry | Wet (drives DO NOT run into wet effects)
• Wet | Dry | Wet with dual delays (one in the L channel & other in R channel)
• Parallel Dual Amps (run dual amp modelers in FULL stereo)
• Convert a tube amp's serial FX Loop to a parallel FX Loop
• Stereo and Mono analog dry through (avoid latency in digital pedals)

Features: