Cypress, CA (January 19, 2017) -- Lace Music Products is introducing the new, Aluma Disc magnetic pickup for acoustic guitar.
Building upon the Lace patented ācurrent drivenā technology, Aluma Disc offers the player a pickup which offers both feedback suppression and amplified sound in one unit. As natural feedback occurs through many playing situations, the Aluma Disc covers the entire soundhole area while also acting as the magnetic pickup for the guitar.
Based on patented Alumitone technology, which uses an initial ācurrentā rather than voltage design, the pickup is the soundhole feedback suppressor in simple terms.
An elegant design with simple installation gives the Aluma Disc a true acoustic tone without any noise or feedback. Conventional magnetic designs would incur a large coil as part of the pickup, whereas the Aluma Disc coil is designed with 95 percent less copper wire. The Aluma Disc winding weighs a mere 3 ounces, thus defeating the chance of coil feedback and eliminating outside noise completely.
The Aluma Disc will be available Spring 2017. The suggested retail price is $128.99.
For more information, see the Aluma Disc and all other Lace pickups at lacemusic.com or facebook.com/lace pickups.
For more information:
Lace Music
The Gibson EH-185, introduced in 1939, was one of the companyās first electric guitars.
Itās hard to overstate the importance of electric guitar in shaping American popular music over the last half-century. Its introduction was a revolution, changing the course of modern musical styles. Today, when we think of the guitars that started the revolution, we think of the Stratocaster and the Les Paul, guitars held against the body and fretted with the fingertips. But the real spark of this musical mutiny was the lap-steel guitar.
In the early 20th century, guitar music was moving out of the parlors of homes and into public spaces where folks could gather together and dance. Guitarists needed to project their sound far beyond where their wimpy little acoustic instruments could reach. Instrument manufacturers began experimenting with larger body sizes, metal construction, and resonators to increase volume.
Around this time, George Beauchamp began experimenting with electric guitar amplification. He settled on a design using two U-shaped magnets and a single coil of wire. Beauchamp was in business with Adolph Rickenbacker, and they decided to stick this new invention into a lap steel.
If we put on our 1930s glasses, this decision makes perfect sense. The most popular music at the time was a blend of Hawaiian and jazz styles made famous by virtuosos like Solomon āSolā HoŹ»opiŹ»i. Photos of HoŹ»opiŹ»i with a metal-body resonator aboundāone can imagine his relief at being handed an instrument that projected sound toward the audience via an amplifier, rather than back at his own head via resonator cones. Beauchamp and Rickenbacker were simply following the market.
As it turned out, the popularity of Hawaiian music gave way to swing, and electric lap steels didnāt exactly take the world by storm. But Beauchamp and Rickenbacker had proven the viability of this new technology, and other manufacturers followed suit. In 1937, Gibson created a pickup with magnets under the strings, rather than above like Beauchampās.
āWhen I plugged in the EH-185 I expected to hear something reminiscent of Charlie Christianās smooth, clean tone. But what I got was meatierācloser to what I associate with P-90s: warm and midrange-y.ā
The first page of Gibsonās āElectrical Instrumentsā section in the 1939 catalog features a glowing, full-page write-up of their top-of-the-line lap steel: the EH-185. āEverything about this new electric Hawaiian Guitar smacks of good showmanship,ā effuses the copy. āIt has smoothness, great sustaining power, and an easy flow of tone that builds up strongly and does not die out.ā
Picking up the 1940 EH-185 at Fannyās House of Music is about as close as one can get to traveling back in time to try a new one. It is just so clean, with barely any dings or even finish checking. Overall, this is a 9/10 piece, and itās a joy to behold. Speaking of picking it up, the first thing you notice when you lift the EH-185 out of the case is its weight. This is a much heavier instrument than other similar-sized lap steels, owing to a length of thick metal between the body and the fretboard. The catalog calls it āHyblum metal,ā which may be a flowery trade name for an early aluminum alloy.
This 1940 EH-185 is heavier than other lap steels in its class, thanks to a length of metal between its fretboard and body.
Photo by Madison Thorn
There are numerous other fancy appointments on the EH-185 that Gibson didnāt offer on their lesser models. Itās made of highly figured maple, with diamond-shaped decorations on the back of the body and neck. The double binding is nearly a centimeter thick and gives the instrument a luxurious, expensive look.
Behind all these high-end attributes is a great-sounding guitar, thanks to that old pickup. Itās got three blades protruding through the bobbin for the unwound strings and one longer blade for the wound strings. When I plugged in the EH-185 I expected to hear something reminiscent of Charlie Christianās smooth, clean tone. But what I got was meatierācloser to what I associate with P-90s: warm and midrange-y. It was just crying out for a little crunch and a bluesy touch. Itās kind of cool how such a pristine, high-end vintage instrument can be so well-suited for a sound thatās rough around the edges.
As far as electric guitars go, it doesnāt get much more vintage than this 1940 Gibson EH-185 Lap Steel. It reminds us of where the story of the electric guitar truly began. This EH-185 isnāt just a relicāitās a testament to when the future of music was unfolding in real time. Plug it in, and you become part of the revolution.
Sources: Smithsonian, Vintage Guitar, Mozart Project, Gibson Pre-War, WIRED, Steel Guitar Forum, Vintaxe
Editorial Director Ted Drozdowskiās current favorite noisemakers.
Ted Drozdowski - Editorial Director
My favorite is my Burns Buzz, a stomp custom-made for me by Gary Kibler of Big Knob Pedals. Gary specializes in recreations of old circuits, and this Burns Buzzaround-inspired box has four germanium NOS transistors and sounds beautifully gnarly. It improves on the original, which Robert Fripp favored in early King Crimson, by adding a volume control. I went a little stir-crazy acquiring fuzzes during Covid lockdown and now have an embarrassing amount. My other current darlings are a SoloDallas Orbiter (which balances fuzz with core-signal clarity), a Joe Gore Duh (a no-nonsense, 1-knob dirt shoveler), and my Big Knob Tone Blender MkII 66, which taught me how smooth and creamy fuzz can be with carefully calibrated settings. These pedals allow me to cover all of my favorite fuzz sounds from the past 60 years. I do have one more secret weapon fuzz that only travels to the studio: an original Maestro FZ-1 that I picked up used for about $20 in the early ā90s. Itās banged up but functional, takes two 9V batteries, and is righteously juicy.
Nick Millevoi - Senior Editor
The two greatest fuzzes Iāve ever played are a Pigdog Tone Bender build and a Paul Trombetta Bone Machine. Both experiences will stick with me for decades to come. But creations by those two masters of fuzz come with a price tag high enough to keep my time with those pedals fleeting.
Instead, my favorite fuzz is an inexpensive, mass-produced pedal that hasnāt left my board since I reviewed and subsequently purchased it in 2021: the Electro-Harmonix Ripped Speaker, designed to emulate the distorted tones on ā50s and ā60s records that were created with broken or misused gear.
Retro inspiration is not all it has to offer though. The rip knob, which controls transistor bias, is the star of the show, interacting with the fuzz level to deliver everything from a smooth, mild fuzz to sputtery mayhem that can evoke a faulty channel strip or old tube combo thatās been set ablaze. I prefer to crank the rip knob and feed it to a phaser and slapback analog delay, which gives me a bit-crushed-like gnarliness. Pull back on the rip or add a boost in front of the pedal, and it has a more organic but still gated sound, which, for me, can be just the thing to set my sound apart in a more traditional setting.
For a cool $116, the Ripped Speaker, which seems to fly under most fuzz freaksā radars, might be the special something that complements the rest of your board or just a tone you turn to on occasion. Either way, itās a great deal.
Luke Ottenhof - Assistant Editor
You could give me the most powerful-sounding fuzz in the world, but if it was in a stupid-looking enclosure, I donāt know if Iād give it a second look. This is just how we operate: Vision is the sense we privilege most, even in matters of audio.
Luckily, the most seismic, monstrous fuzz Iāve ever heard also happens to come in a beautiful package. The Mile End Effects Kollaps, built by Justin Cober in Montreal, measures an elephantine 7 3/8" x 4 5/8" x 1 1/2", and its MuTron-meets-ā60s-Soviet aesthetic matches the sounds its guts produce. The Kollaps is modeled after the nasty Univox Super-Fuzz circuit, and carries a few of that pedalās hallmarks, including its use of germanium diodes and midrange boost control. Cober added a switchable Baxandall active EQ circuit, with up to 12 dB of boost and cut to both low and high frequencies. Coupled with the mid-boost toggle, this gives the Kollaps a shockingly broad range of tonality to play with.With the mids off, the Kollaps is jagged and ruthless, a deafening turbojet of upper mids and chest-vibrating lows that yanks me toward the darker, less commercially successful corners of ā90s doom and noise rock. Kicking on the EQ circuit and boosting the lows turns it titanic. With the balance (volume) and expand (gain) controls maxed, the Kollaps starts to live up to its name, crumbling into a thick, overextended chaos in a way more polite fuzz circuits rarely do.
My favorite Kollaps sounds occur when the mids are engaged, for an articulate, deeply textured fuzz sound that retains your attack. Playing with your guitarās volume knob, you can coax a range of EQ profiles and take advantage of the upper- and lower-octave content in the fuzz. With guitar volume lower, you can access some unbelievably emotive and sensitive sounds that still teeter on the edge of chaos and violence. Itās a rich, volatile circuit that gets as close as Iāve heard to a sound and physical feeling Iād call āplanet-destroying.ā
Charles Saufley - Gear Editor
My first fuzz, A Sovtek Big Muff, remains tied for first place among many favorites. The pedalās most famous virtuesācorpulence and sustaināare among the reasons I treasure it. But the way the Sovtek pairs with a Rickenbacker 330 and Fender Jaguar, which were once my two primary guitars for performance and recording, made it invaluable in various projects for a long time. Neither the Ricky nor the Jag are sustain machines, but the wailing mass of theBig Muff makes their focused voices an assetāinspiring tight, concise fuzz phrases, hooks, and riffs as well as articulate chords.
A silicon Fuzzrite clone built by good pal Jesse Trbovich (long-time member ofKurt Vileās Violators) runs second place to the Sovtek in terms of tenure, and is a very different fuzz. Itās a piercing, hyper-buzzy thing, but a perfect match for a squishy 1960s Fender Bassman head and 2x12 I adore. Perversely, I sometimes couple it with a Death By Audio Thee Ffuzz Warr Overload or Wattson FY-6 Shin-Ei Super-Fuzz clone. These tandems create chaos and chance, but sing loud and melodiously tooāat least when Iām not intentionally bathing in feedback. The Jext Telez Buzz Tone, a clone of the mid-ā60s Selmer circuit, is often my go-to now. Itās a low-gain affair compared to the other fuzzes here, and I use it in its even-lower-gain (and vintage-correct) 3-volt setting. Itās pretty noisy, but it is thick, dynamic, detailed, raunchy, and plenty trashy when the occasion demands it. Itās also a very cool overdrive when you back off the gas.Jason Shadrick - Managing Editor
I rarely need fuzz in my everyday gigs, but it's one of the most fun effects to explore when I'm noodling around. At a NAMM show a few years ago I plugged into Mythos' Argo and as soon as I hit a note my eyes lit up. The sound of the fuzz wasn't unwieldy or hard to manage. It gave me the illusion of control while the octave was the magic dust on top. I knew right then I wasn't leaving the show without one. After I spent some time with it, I became enamored by how much more the Argo can do.
It's inspired by the Prescription Electronics C.O.B. (Clean Octave Blend), so the control set is similar. The octave is always present in the signal path, but you can dial it out with the blend knob. The fuzz and volume knobs are self explanatory, but dialing the fuzz and octave knobs all the way down gives you a killer boost pedal. I find my favorite settings are at the extremes of the fuzz and blend ranges. Typically, both are either all the way up or all the way down. Another great experiment is to turn the fuzz down and then pair it with a separate drive pedal. And in octave mode, Argo is one of those pedals that inspires you to head directly for the neck pickup and stay above the 12th fret.
