Uncle Ed makes a meaningful guitar for his nephew, Rog, incorporating special woods from local trees and buildings in their Irish community.
Woodie was born during lockdown when my Uncle Ed combined a number of very special woods into one guitar. Iād never thought about how a guitar was made before, so it was a real combination of my āguitarist ideas,ā and Edās ingenuity and patience. That, combined with a worldwide pandemic and time to try something new.
Ed gave me free rein to choose any design I wanted. This is a daunting proposition, so I did my research and decided on the ātoneā that Ed kept talking about. All my other electric guitars have a whammy bar, so I thought it might be interesting to not have one. I knew Iād miss the dive bends and the portamento, but Iād been reading about Vivian Campbellās vibrato, and Iād tried a Malmsteen Strat in a guitar shop. So, I asked Ed if he would go down the thicker tone route and scallop all the frets so I could still get lots of bend out of any note. I asked for a kill switch so I could try out some rhythmic things.
The woods used in this build are a mixture of reclaimed tropical and locally sourced hardwoods. The most personal wood is from a chestnut tree that my father planted when I was born (it is full-size now). The neck is made from a holly tree from where I grew up in Ireland. Irish guitarist Pat McManus was an early inspiration as he lived close by. Ed made the body from a piece of mahogany that a friend gave him about 10 years ago. He knew it was from a significant building in Belfast but couldnāt remember where. Turns out, the mahogany came from the old reception desk in Belfast City Hospital ... this was the hospital I was born in! There is also a little bit of rowan wood on the back: Rowan is Edās surname. Obviously, I named this guitar āWoodie.ā
The scalloped frets took a little time to get used to, especially when keeping barre chords in tuneāyouāve got to keep a light touch. Iāve settled on Ernie Ball .010s and use thick picks made of wood or bone. My other guitars are D- and C-shaped necks, but Woodie could be described as a U-shaped neckāitās seriously thick. It took some time, but my fingers became much stronger and there is so much tone.
Rog Rowan's uncle, Ed, contemplates the task at hand.
The hardware switches and electrical components were procured from various U.K. and Irish suppliers:
ā¢ Tune-o-matic bridge and tailpiece
ā¢ Kluson machine heads
ā¢ Japanese nickel alloy fret wire
ā¢ Double humbucker pickups
ā¢ Logarithmic potentiometers (500k log pots)
ā¢ Orange drop capacitors (.022 ĀµF)
ā¢ Tesi gold kill switch
ā¢ 3-way pickup selector switch
ā¢ Jack plug socket and cover
ā¢ Double-action truss rod
ā¢ Oversized brass strap buttons
ā¢ Australian abalone shell fretboard side markers
ā¢ Vintage braided cloth 22awg wiring
To thank him for his beautiful work, I bought Uncle Ed an Appalachian dulcimer and posh whiskey! PG
Send your guitar story to submissions@premierguitar.com.
- Reader Guitar of the Month: The Wizard āŗ
- Reader Guitar of the Month: Olde Skully āŗ
- Reader Guitar of the Month: Keith Richards Swamp Monster āŗ
The Texan rocker tells us how the Lonestar State shaped his guitar sounds and how he managed to hit it big in Music City.
Huge shocker incoming: Zach Broyles made a Tube Screamer. The Mythos Envy Pro Overdrive is Zachās take on the green apple of his eye, with some special tweaks including increased output, more drive sounds, and a low-end boost option. Does this mean he can clear out his collection of TS-9s? Of course not.
This time on Dipped in Tone, Rhett and Zach welcome Tyler Bryant, the Texas-bred and Nashville-based rocker who has made waves with his band the Shakedown, who Rhett credits as one of his favorite groups. Bryant, it turns out, is a TS-head himself, having learned to love the pedal thanks to its being found everywhere in Texas guitar circles.Bryant shares how he scraped together a band after dropping out of high school and moving to Nashville, including the rigors of 15-hour drives for 30-minute sets in a trusty Ford Expedition. Heās lived the dream (or nightmare, depending on the day) and has the wisdom to show it.
Throughout the chat, the gang covers modeling amps and why modern rock bands still need amps on stage; the ins and outs of recording-gear rabbit holes and getting great sounds; and the differences between American and European audiences. Tune in to hear it all.
Get 10% off your order at stewmac.com/dippedintone
Guest picker Carmen Vandenberg of Bones UK joins reader Samuel Cosmo Schiff and PG staff in divulging their favorite ways to learn music.
Question: What is your favorite method of teaching or learning how to play the guitar?
Guest Picker - Carmen Vandenberg, Bones UK
The cover of Soft, Bones UKās new album, due in mid-September.
A: My favorite method these days (and to be honest, from when I started playing) is to put on my favorite blues records, listen with my eyes closed, and, at the end, see what my brain compartmentalizes and keeps stored away. Then, I try and play back what I heard and what my fingers or brain decided they liked!
Bone UKās labelmade, Des Rocks.
Obsession: Right now, I am into anyone trying to create sounds that havenāt been made beforeābands like Queens of the Stone Age, Jack White, and our labelmate, Des Rocs! Thereās a Colombian band called DiamantĆ© Electrico who Iāve been really into recently. Really anyone whoās trying to create innovative and inspiring sounds.
Reader of the Month - Sam C. Schiff.
Sam spent endless hours trying to learn the solo Leslie West played on āLong Red,ā off of The Road Goes Ever On.
A: The best way to learn guitar is to listen to some good guitar playing! Put on a record, hear something tasty, and play on repeat until it comes out of your fingers. For me, it was Leslie West playing āLong Redā on the Mountain album, The Road Goes Ever On. I stayed up all night listening to that track until I could match Leslieās phrasing. I still canāt, no one can, but I learned a lot!
Smithās own low-wattage amp build.
Obsession: My latest musical obsession is low-wattage tube amps like the 5-watt Fender Champ heard on the Laylaalbum. Crank it up all the way for great tube distortion and sustain, and itās still not loud enough to wake up the neighbors!
Gear Editor - Charles Saufley
Charles Saufley takes to gear like a duck to water!
A: Learning by ear and feel is most fun for me. I write and free-form jam more than I learn other peopleās licks. When I do want to learn something specific, Iāll poke around on YouTube for a demo or a lesson or watch films of a player I like, and then typically mangle that in my own āspecialā way that yields something else. But I rarely have patience for tabs or notation.
The Grateful Deadās 1967 debut album.
Obsession: Distorted and overdriven sounds with very little sustaināKeith Richardsā Between the Buttons tones, for example. Jerry Garciaās plonky tones on the first Grateful Dead LP are another cool, less-fuzzy version of that texture.
Publisher - Jon Levy
A: Iām a primitive beast: The only way I can learn new music is by ear, so itās a good thing I find that method enjoyable. Iām entirely illiterate with staff notation. Put sheet music in front of me and Iāll stare at it with twitchy, fearful incomprehension like an ape gaping at the monolith in 2001: A Space Odyssey. Iām almost as clueless with tab, but I can follow along with chord charts if Iām under duress.
The two-hit wonders behind the early ā70s soft-rock hits, āFallinā in Loveā and āDon't Pull Your Love.ā
Obsession: Revisiting and learning AM-radio pop hits circa 1966ā1972. The Grass Roots, Edison Lighthouse, the Association, the Archies, and Hamilton, Joe Frank & Reynoldsānothing is too cheesy for me to dissect and savor. Yes, I admit I have a serious problem.
Diamond Pedals introduces the Dark Cloud delay pedal, featuring innovative hybrid analog-digital design.
At the heart of the Dark Cloud is Diamondās Digital Bucket Brigade Delay (dBBD) technology, which seamlessly blends the organic warmth of analog companding with the precise control of an embedded digital system. This unique architecture allows the Dark Cloud to deliver three distinct and creative delay modesāTape, Harmonic, and Reverseāeach meticulously crafted to provide a wide range of sonic possibilities.
Three Distinct Delay Modes:
- Tape Delay: Inspired by Diamondās Counter Point, this mode offers warm, saturated delays with tape-like modulation and up to 1000ms of delay time.
- Harmonic Delay: Borrowed from the Quantum Leap, this mode introduces delayedoctaves or fifths, creating rich, harmonic textures that swirl through the mix.
- Reverse Delay: A brand-new feature, this mode plays delays backward, producing asmooth, LoFi effect with alternating forward and reverse playbackāa truly innovativeaddition to the Diamond lineup.
In addition to these versatile modes, the Dark Cloud includes tap tempo functionality with three distinct divisionsāquarter note, eighth note, and dotted eighthāensuring perfect synchronization with any performance.
The Dark Cloud holds special significance as the final project conceived by the original Diamondteam before their closure. What began as a modest attempt to repurpose older designs evolved into a masterful blend of the company's most beloved delay algorithms, combined with an entirely new Reverse Delay setting.
The result is a āgreatest hitsā of Diamond's delay technology, refined into one powerful pedal that pushes the boundaries of what delay effects can achieve.
Pricing: $249
For more information, please visit diamondpedals.com.
Main Features:
- dBBDās hybrid architectureļ· Analog dry signalļ· New reverse delay setting
- Three distinct, creative delay modes: Tape, Harmonic, Reverse
- Combines the sound and feel of analog Companding and Anti-Aliasing with an embedded system delay line
- Offering 3 distinct tap divisions with quarter note, eighth note and dotted eighth settings for each of the delay modes
- Pedalboard-friendly enclosure with top jacks
- Buffered bypass switching with trails
- Standardized negative-center 9VDC input with polarity protection
Dark Cloud Multi-Mode Delay Pedal - YouTube
Curious about building your own pedal? Join PG's Nick Millevoi as he walks us through the StewMac Two Kings Boost kit, shares his experience, and demos its sound.