My years-long search for the “right” Bigsby-outfitted box finally paid off. Now how do I make this sumbitch work in my band?
Considering the amount of time I’ve spent (here and elsewhere) talking about and lusting after Gretsch hollowbody guitars, it’s taken me a remarkably long time to end up with a big Bigsby-outfitted box I truly love. High-end Gretsches are pricey enough that, for a long time, I just couldn’t swing it. Years ago I had an Electromatic for a while, and it looked and played lovely, but didn’t have the open, blooming acoustic resonance I hoped for. A while later, I reviewed the stellar Players Edition Broadkaster semi-hollow, and it was so great in so many ways that I set my sights on it, eventually got one, and adore it to this day. Yet the full-hollowbody lust remained.
I’ve long been more of a single-coil player than a humbucker guy, so the more I thought about it, the more intrigued I was by the idea of a hollow with pickups that weren’t of the Filter’Tron variety. I also liked the idea of a lower-key aesthetic. So in early April, after a bunch of research and listening, I pulled the trigger on a beauty from the other stellar “G” hollowbody brand. With its transparent blonde finish and P-90-esque Franz single-coil pickups, the Guild X-175B Manhattan I picked up ticks both boxes nicely. And for a very reasonable used price, too.
After outfitting it with a set of Thomastik-Infeld flatwound strings, I ended up loving the Manhattan’s woody resonance so much I had to try it with my band. Problem is, I play in a drums-and-guitar duo where my Vibrolux Reverb runs in tandem with a bass amp to fill out the sonic space (two of my main band axes are baritones, and a keyboard goes through the same pedalboard and amp array). As you might’ve guessed, the Manhattan did not initially love the bass amp. When I plugged in with my usual settings, the howling was so rabid I figured the Guild would never work out at band volumes—or at least not in that band.
You can’t ride the wild horsey without widening your entire playing mindset to be much more cognizant of when something … threatens to cause a fit of mad buzzing.
But the more I played the 175B through other amps and at quieter volumes, the more I realized I had to give it another go. The guitar’s acoustic depth and the Franz’s clear-but-mellow, almost Jazzmaster-esque response are so old-school charming but big and bold and vibrant that I decided it might be worth revamping settings for the entire bass-and-guitar-amp rig.
Figuring it all out has been a wild mustang ride. Tremolo and vibrato intensity needed to be increased a tad to yield the same vibes they do with other guitars. But my usual gnarly fuzz tastes are too out-of-control and indistinct with the Manhattan, so fuzz might be off the board indefinitely. The good news is that you can work that howling susceptibility to your advantage and create huge, pulsating sounds that are as bombastic in their own way as a fuzzed-out solidbody.
To bridle the beast, I tried shoving a sock or four through the f-holes. It worked a bit, but it also deadened the sound and killed that “alive” feeling that makes the resonating body so cool to work with in the first place. So out the socks went. Interestingly, bringing down the volume of the Vibrolux—not the bass amp—helped significantly, though I refuse to take it below 3 because it just won’t sound right. Being mindful of how playing positions and proximity to the amps exacerbate the problem are also key. Even so, you can’t ride the wild horsey without widening your entire playing mindset to be much more cognizant of when something—most often it’s simply sustaining a 6th-string note—threatens to cause a fit of mad buzzing. It’s an entirely new world of dynamics, dampening, and muting, with both your fretting and your picking hands.
We’re still experimenting with how all this might shake out in the band, but so far the sounds and overall vibes are so cool we’re considering adjusting song arrangements, instrumentation, and tunings to better coalesce around the Guild’s wonderful sounds. (The simplicity of one guitar, one keyboard, and not too many pedals has its attendant benefits, too, including a streamlined sonic aesthetic and reduced time and technical issues between songs.) Anyway, wish us luck!
- Gretsch G6636TSL Silver Falcon Review - Premier Guitar ›
- Gretsch G6609TFM Players Edition Broadkaster Review - Premier ... ›
- Gretsch Streamliner G2420T Review - Premier Guitar ›
In collaboration with Cory Wong, the Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
In collaboration with Cory Wong, this Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: Iconic blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
Renowned international funk guitar maestro and 63rd Grammy nominee Cory Wong is celebrated for his unique playing style and unmistakable crisp tone. Known for his expressive technique, he’s been acclaimed across the globe by all audiences for his unique blend of energy and soul. In 2022, Cory discovered the multi-functional Soul Press II pedal from Hotone and instantly fell in love. Since then, it has become his go-to pedal for live performances.Now, two years later, the Hotone team has meticulously crafted the Wong Press, a pedal tailored specifically for Cory Wong. Building on the multi-functional design philosophy of the Soul Press series, this new pedal includes Cory’s custom requests: a signature blue and white color scheme, a customized volume pedal curve, an adjustable wah Q value range, and travel lights that indicate both pedal position and working mode.
Cory’s near-perfect pursuit of tone and pedal feel presented a significant challenge for our development team. After countless adjustments to the Q value range, Hotone engineers achieved the precise WAH tone Cory desired while minimizing the risk of accidental Q value changes affecting the sound. Additionally, based on Cory’s feedback, the volume control was fine-tuned for a smoother, more musical transition, enhancing the overall feel of volume swells. The team also upgraded the iconic travel lights of the Soul Press II to dual-color travel lights—blue for Wah mode and green for Volume mode—making live performances more intuitive and visually striking.
Features
- True Bypass
- 4 in 1 functionality (volume, expression, wah, volume/wah)
- New dual-color STATUS LED strip indicating pedal mode and position in real time
- Cory’s custom volume curve and wah Q control
- Classic-voiced wah tone with flexible tonal range
- Active volume design for keeping lossless tone
- Separate tuner and expression outputs for more connection possibilities
- 9V DC or 9V battery power supply
Introducing the Hotone Wong Press - Cory Wong's signature Volume/Wah/Expression Pedal - YouTube
Check the product page at hotone.com
Big time processing power in a reverb that you can explore for a lifetime.
An astoundingly lush and versatile reverb of incredible depth and flexibility. New and older BigSky algorithms included. More elegant control layout and better screen.
It’s pricey and getting the full use out of it takes some time and effort.
$679
Strymon BigSky MX
strymon.net
Strymon calls the BigSky MX pedal “one reverb to rule them all.” Yep, that’s a riff on something we’ve heard before, but in this case it might be hard to argue. In updating what was already one of the market’s most comprehensive and versatile reverbs, Strymon has created a reverb pedal that will take some players a lifetime to fully explore. That process is likely to be tons of fun, too.
Grinding out impressive DSP power via an 800 MHz tri-core ARM processor with 32-bit floating-point processing, the BigSky MX introduces seven brand-new reverb algorithms, allows users to load any compatible convolution reverb (or impulse response) as well as to use two reverbs simultaneously—in series, parallel, and split—plus it delivers several other mind-bending features. Given this wealth of goodies, it’s impossible to test and discuss every sound and function, but what we heard is exciting.
Infinite Space
The updated MX will look very familiar to those who know the original BigSky. The form factor is nearly identical, though the MX is a bit larger. Its control interface is similar too, albeit rearranged into a single row of knobs that looks more balanced. Rotary controls include decay, pre-delay, tone, mod, parameter 1, parameter 2, and mix. A value knob enables effect-level manipulation on the larger, clearer OLED screen. It also allows you to select between the older or “classic” algorithms from the original BigSky and the seven new ones. Three footswitches allow for preset selection, bank up or down (two switches pressed together), and an infinite hold/sustain switch that’s always available. The rotary “type” knob in the upper-left corner spins between 12 basic reverb voices. As with most things Strymon, many of these controls are multi-function.
Also very Strymon-like are the top-mounted, 5-pin DIN MIDI I/O connections, which come in handy if you want to maximize the pedal’s potential in a MIDI-controlled rig. But you can access more than enough right from the pedal itself to satisfy the needs of most standard pedalboard-based setups. A USB-C port enables computer connection for MIDI control via that route, use of the Nixie 2 editing app, or firmware updates.
There are stereo jacks for both input and output, plus a multi-function 1/4" TRS/MIDI expression jack for use with a further range of external controllers. The standard center-negative power jack requires a DC supply offering at least 500 mA of current draw.
It is utterly hypnotic and addictive once you settle in and work a little more intuitively.
Sky’s the Limit
The BigSky MX was, initially, a bit mind-boggling on account of the seemingly endless possibilities. But it is utterly hypnotic and addictive once you settle in and work a little more intuitively. Suffice it to say, the core quality of the reverb sounds themselves are excellent, and the sheer variety is astounding. Beyond the standard emulations, I really dug several permutations of the cloud reverb, the chorale mode (which adds tenor and baritone harmonizing tones), and bloom mode (which generates deep synthesizer-style pads), and I could have gotten lost in any of these for hours if there wasn’t so much more to explore. Among the highlights: There is now an option to pan reverbs across the stereo field. The MX also uses audio design concepts borrowed from tape delays to create rhythmic pattern-based reverbs, which is an excellent compositional tool.
The Verdict
This latest evolution of the already impressive and super-capable BigSky is the kind of pedal that could cause you to disappear into your basement studio, never to return. The sounds are addictive and varied and can be configured in endless creative ways. The programmability and connectivity are also superb. Additionally, the new algorithms weren’t added at expense of the old BigSky algos. There’s no doubt that it will be flat-out too much horsepower for the guitarist that needs a few traditional sounds and, perhaps, a few more spacious options. And it would be interesting to know what percentage of the pedal’s customers end up being synth artists, engineers, or sound designers of one kind or another. If you’re the kind of guitar player that enjoys stretching the sound and capabilities of your instrument as far as they will go, the BlueSky MX will gladly ride along to the bounds of your imagination. It may test the bounds of your budget, too. But in many ways, the BigSky MX is as much a piece of outboard studio gear as a stompbox, and if you’re willing to invest the time, the BigSky MX has the goods to pay you back.
“The Player II Series represents our continued evolution in design and functionality,” said Justin Norvell, EVP of Product, FMIC. “We listened to the feedback from musicians around the world and incorporated their insights to refine and innovate our instruments. The re-introduction of rosewood fingerboards is a restoration of the ‘original Fender recipe’ and will no doubt be a fan favorite - but we didn’t want to stop there. We’ve also incorporated our rolled fingerboard edges for a broken-in feel, upgraded hardware, and have some new body options as well- which underscores our commitment to providing players and creators with the tools they need to express their unique sound and style. The Player II Series is not just an upgrade, it's a detailed re-imagining of our core silhouettes, highlighting our dedication to quality and the continuous refinement of our instruments.”
Additionally, Player II offers new options for chambered ash and chambered mahogany bodies for the Player II Stratocaster and Telecaster models, which will be available in October. Designed for musicians ready to elevate their craft, the Player II Series sets a new standard for quality and performance in the mid-price range.
Fender Player II Stratocaster HSS Electric Guitar - Coral Red
Player II Strat HSS RW, Coral RedFender Player II Jaguar Electric Guitar - Aquatone Blue
Player II Jaguar RF, Aquatone BlueThis reader solicited the help of his friend, luthier Dale Nielsen, to design the perfect guitar as a 40th-birthday gift to himself.
This is really about a guy in northern Minnesota named Dale Nielsen, who I met when I moved up there in 2008 and needed somebody to reglue the bridge on my beloved first guitar (a 1992 Charvel 625c, plywood special). Dale is a luthier in his spare time—a Fender certified, maker of jazz boxes.
Anyway, we became friends and I started working on him pretty early—my 40th birthday was approaching, and that meant it was time for us to start designing his first solidbody build. If you stopped on this page, it’s because the photo of the finished product caught your eye. Beautiful, right? The 2018 CCL Deco Custom: Never shall there be another.
Old National Glenwood guitars were my design inspiration, but I wanted a slim waist like a PRS and the like. We used a solid block of korina to start, routed like MacGyver to get the knobs and switches where I wanted them. Dale builds all his own lathes and machines (usually out of lumber, y’all), as the task requires. This beast took some creativity—it’s tight wiring under that custom-steel pickguard. Many were the preliminary sketches. Four coats of Pelham blue, 11 coats of nitro. Honduran mahogany neck, Madagascar ebony fretboard with Dale’s signature not-quite-Super-400 inlays. He designed the logo; I just said, “Make it art deco.”
We sourced all the bits and bobs from StewMac and Allparts and Reverb and the like, mostly to get that chrome look I so adore. Graph Tech Ratio tuners, Duesenberg Radiator trem (had to order that one from Germany), TonePros TP6R-C roller bridge. The pickups were a genius suggestion from the builder, Guitarfetish plug ’n’ play 1/8" solderless swappable, which means I have about 10 pickups in the case to choose from: rockabilly to metal. And both slots are tapped, with the tone knobs serving as single- to double-coil switches. I put the selector on the lower horn to accommodate my tendency to accidentally flip the thing on Les Pauls—definite lifesaver.
Reader and guitar enthusiast, Cody Lindsey.
Dale offered to chamber this monster, but I said what doesn’t kill you makes you stronger. It weighs in at 11 pounds, if it’s an ounce. We carved the neck to match a ’60s SG, so it’s like the mini bat you get at the ballpark on little kids’ day. Easy peasy. 1 11/16" nut, 25" scale, jumbo frets, just 2 1/8" at the 12th fret.
Delivery in its lovely, hygrometer-equipped Cedar Creek case actually happened a month or two shy of my 41st, but hey, you can’t rush these things. We ended up with a studio Swiss Army knife; it does a bit of everything and does it effortlessly. A looker, too. Dale didn’t spend his career doing this kind of thing—he was in IT or some such—and I imagine he’s winding this “hobby” of his down these days, enjoying retirement with a bottle of Killian’s and a lawn chair at Duluth Blues Fest. But this guitar will live on as a marker of his skill and otherworldly patience. It sits at the head of the class in my practice room, welcoming any visitors and bringing a smile to my face every day. And Dale, my friend, I’ll be 50 before you know it....
Cody requested that Dale design an art deco logo for the guitar’s headstock.