The effects guru puts two historic pedals—the TS808 and the Nobels ODR-1—inside a single box, with a fresh circuit design that allows for four variations on their revered voices.
At first glance, Keeley Electronics’ new Noble Screamer seems like a guitarist’s dream version of a Reese’s Peanut Butter Cup. This enticing morsel tastefully pairs two classic overdrive flavors, the timeless (and ubiquitous) Ibanez TS808 Tube Screamer and the best-kept-secret Nobels ODR-1.
The two circuits lurk side-by-side beneath the Noble Screamer’s sleek hood, ready for action. But there’s more: Keeley Electronics’ founder and designer Robert Keeley provides a nifty additional twist for creating your own sonic mashups. With the Noble Screamer pedal you can link the Tube Screamer-like overdrive section—a masterpiece of soft-clipping aural bliss—with the ODR-1’s thumping sonic flavors. Or conversely, you can deploy the ODR-1’s hard-clipping drive with the Tube Screamer’s famously midrange-forward tone circuit. Voila! Suddenly you have four pedals in one.
Beyond providing some pretty darn sweet guitar tones, the Noble Screamer also embodies a few bigger and more profound themes. It shows increased emphasis on made-in-the-USA manufacturing, a trend that extends far beyond music gear. It offers additional options for buffering and true bypass as standard equipment on a guitar pedal—highly useful even for guitarists who remain stubbornly technology averse. And it aims to reinvent a key product line from an iconic company. But let’s start at the beginning…
Nailing the Right Shade of Green
“Pairing the ODR and Tube Screamer isn’t just about the green color, but it sure helped,” laughs Robert Keeley. “There is a rhyme and reason why I chose those two pedals for the Noble Screamer. I had never done any mods or anything based on the ODR-1, but the idea for the pedal came from this: Wouldn’t it be fun to combine two green pedals? And what if I could allow you to hear what makes each pedal unique, and borrow from one to the other? I was able to choose between the Tube Screamer tone control or the ODR tone control, and do the same thing with their clipping sections. So, I built both circuits in there, so people could mix-and-match and hear what makes each pedal unique.”
Keeley Electronics Noble Screamer Overdrive and Boost - Tech Demo
Keeley knew he would face heavy scrutiny in tackling the ODR-inspired circuit. Introduced in 1992, the Nobels ODR-1 has attained near-mythic status in the Nashville scene, spurred by the advocacy of session veteran Tom Bukovac. Almost singlehandedly, Bukovac—fondly known as “Uncle Larry” to his online followers—helped popularize the original ODR-1 among his Nashville friends and collaborators. And over the years, many of Nashville’s heaviest hitters have made the pedal an essential part of their arsenal.
Tom Bukovac x Keeley Electronics - Noble Screamer vs Vintage ODR-1 vs Vintage TS808
“There’s a constituency in Nashville, Brentwood, and Franklin that really loves this pedal,” Keeley notes. “They’re all friends and they’re damn near family, and this pedal works so well with their music. So, one of our goals became winning over that Nashville crowd. We carefully compared this to some great examples of 808s and ODRs—using audio analyzers, too—and then we took it to Nashville and asked veteran players to compare it to the original units.”
The Noble Screamer passed the audition. After A/B’ing it with an original ODR-1, Nashville session and stage ace Guthrie Trapp acknowledged “we’re sitting here and can hardly tell the difference. And to not have to spend $1,500 or $2,000 on a pedal…,” he added, shaking his head. And even Bukovac himself says, “They sound pretty similar. The guitar tone sounds great.”
Guthrie Trapp x Keeley Electronics - Noble Screamer vs Vintage ODR-1 vs Vintage TS808
Adding a Few Twists
Plenty of players will be hooked by the authentic sound of the Noble Screamer’s two iconic overdrives. But for many guitarists, the real fun begins when you experiment with tone/overdrive mashups, combining a Tube Screamer with an ODR tone circuit, and vice versa. “The Noble Screamer’s ODR tone control is a spectrum control,” Keeley notes, “and it moves up the bass and the treble at the same time. The Tube Screamer is a simple low-pass filter that helps create the midrange hump. They make a fun combination and they allow you to get some unique sounds.”
L.A.-based guitarist Brett Papa lauds the approach: “It’s really interesting to see how it nails both of those classic tones. But for me, the hybrid is the coolest thing about that pedal, because it really is the best of both worlds. Some pedals are so temperamental circuit-wise, but it doesn’t really matter with this pedal, because wherever your amp is at, you can dial in a great sound.”
The stompbox also offers unusual flexibility in its switching and buffering capabilities. It utilizes the buffer that Keeley perfected with his earlier Halo pedal (designed with guitarist Andy Timmons). In the Noble Screamer, the player can easily select true-bypass or buffered bypass: Simply step on the on/off switch for two seconds and it’ll toggle between the two settings.
“This pedal’s switching also makes it unique,” says Keeley. “For years I had been carrying around the quote that Bill Finnegan put on his KTR pedal, which has a switch where you can choose true bypass or buffered. He printed ‘almost always better’ on the setting when you switch on the buffer. I think it’s really valuable to have noiseless switching like the old Boss and Ibanez pedals. True bypass is great in a few cases, but the inevitability of it making a clicking sound can be a problem, so that’s why we’re offering buffered bypass, too.”
Taking Control and Upping the Ante
Beyond its sonic characteristics, the Noble Screamer underscores important investments, production advancements and design choices from a company reshaping itself and preparing for its next chapter. The Noble Screamer is the first pedal to take advantage of Keeley’s new Oklahoma City factory and its expanded production capabilities. The most visible sign is the pedal’s newly designed heavy-duty aluminum case. The streamlined, rugged enclosure is built in-house following a large investment in specialized equipment. “Making my own folded aluminum enclosure is a brand new capability,” Keeley explains. “I wanted to stop buying aluminum enclosures from China and start making my own. That way I can control the process and get exactly the type of enclosures that I want. To take full advantage of the enclosures, we also increased our capacity for circuit board manufacturing, and that was another big investment. We got another printer, powder coating booth, and oven. I doubled everything in the whole shop and invested in the future. Other manufacturers who are like-minded can do more manufacturing in the U.S. It’s pretty cool to see so much manufacturing coming back to the States.”
Keeley Factory Drone Video
Keeley chose to design a pedal that combines battle-worthy toughness and understated elegance. The Noble Screamer enclosure boasts a slightly slanted top—an homage to old-school classic pedals—but with a modern look and premium knobs. “The knobs and the subtle graphics speak really loudly on that slanted enclosure,” he says. It’s built like a tank—albeit a rather stylish one.
Was it a difficult decision to go with a standard-sized pedal when mini pedals have seen increasing popularity? Keeley is adamant. “At a time when a lot of people are cutting back on spending, I’m going against the trend and choosing to put out our boldest, most innovative ideas and give people a reason to spend their money on them,” he declares. “I think I can control the costs. The Noble Screamer is the exact same size as comparable pedals. There’s a definite trend toward small pedalboards with pedals that can fulfill one sound. Mini pedals are great and I plan on keeping them as an entry point for our product line. I don’t see any reason why I can’t fold aluminum for my own mini pedals at some point. But in the meantime, when we’re releasing our next generation of pedals, I’m going to focus on this new platform. I want this new line to redefine our product line and what we’re capable of. We’ve had success with compressors and reverbs and delays. This new line is hopefully going to redefine our drives.”
The Noble Screamer heralds a new direction for Keeley Electronics, and guitarists can look forward to more exciting mashups in the future. After all, the Reese’s Peanut Butter Cup turned out to be an enduring classic. So, you can expect plenty more ear candy from Keeley in years ahead.
The PXO was created as a live or studio tool. When we sent Phil the overdrive sample he found that it saved him in backline situations and provided him a drive that plays well with others.
The PXO is an overdrive/boost where you can select pre or post giving you variety in how you want to boost, EQ and overdrive. We have provided standard controls on the overdrive side such as Volume/Gain/Overdrive and EQ but on the boost side you have a separate Tilt EQ that allows you to EQ with simplicity. You can experiment by cascading in a pre or post situation and experiment from there. The PXO has a lush, thick feel to the bottom end and a smooth top end that begs you to dig into the note.
J. Rockett Audio Designs PXO Phil X Signature Overdrive Pedal
Phil X Signature OverdrivePacific Island pluckers had a hand in developing the beloved dreadnought acoustics, and changed the course of American guitar music.
In 1906, a devastating earthquake and three days of raging fires leveled 80 percent of San Francisco. Nine years later, to honor the opening of the Panama Canal and signal that San Francisco was back, the city held the Panama-Pacific International Exposition.
More than 18 million people visited. One of the most popular attractions was the Hawaiian Pavilion. Live music and hula dancing, integral parts of Hawaiian culture, were in the show, where they could be experienced on a large scale on the mainland for one of the first times.
That was the beginning of the Hawaiian music craze that had a good run in the U.S. until the Great Depression. Hawaiian musicians had already embraced the ukulele and steel-string guitar, originating the slide-based lap style (versus the typical, so-called Spanish-style playing orientation). Both instruments saw unprecedented demand on Hawaii and the mainland. The story of the ukulele is well-told, but in doing research for this article, I came across a funny comment that caught my eye: “It could be said that in the mid-1920s, Martin was a ukulele company that also made guitars!”
In early 1916, we made a large-body custom guitar for Hawaiian musician Major Kealakai. He ordered it through our largest distributor, Ditson. It was kind of a 0000-size, 12-fret, steel-string guitar with an extra-deep body. The Major and his band were touring the U.S. mainland, and he felt he needed a bigger, louder guitar.
Shortly after that, Ditson commissioned a new larger, pear-shaped steel-string guitar from us to capitalize on the growing interest in Hawaiian music. It was called the dreadnought. It had just 12 frets, a slotted headstock, and a sizable, resonant body. Initially, the dreadnought didn’t sell very well. We did find success, however, making many of our smaller-bodied guitars with steel strings set up for “Hawaiian-style” playing. These were often made with a koa-wood back and sides, and occasionally tops as well. Additionally, if players wanted to use our other guitars lap-style with a slide, Martin manufactured a nut extender to raise the strings far enough above the frets so they wouldn’t interfere.
“It could be said that in the mid-1920s, Martin was a ukulele company that also made guitars!”
While steel strings were available in the late 1800s, the quality was inconsistent. Thanks to the popularity of the banjo and the mandolin, steel-string quality improved. The steel string provided the extra volume many players were looking for.
During the Great Depression, Ditson suffered financial difficulties and was sold. We kept the dreadnought in the line and put the Martin name on it, but sales still remained low. In 1929, we made a one-off, 14-fret steel-string version of our 000-size guitar for a well-known vaudeville banjo player, Perry Bechtel. We squared off the shoulders to accommodate the 14-fret neck. He loved it—and we thought we were onto something.
Gibson also saw opportunity in larger-bodied guitars with steel strings and 14-fret necks. They introduced three new models in 1932: the HG-20, HG-22, and HG-24. The first two were slightly smaller than our dreadnought, and the third was slightly bigger. They realized the value of a 14-fret neck for modern playing styles with steel strings. But instead of squaring off the shoulders, they moved the bridge down and attached the neck to the slope-shouldered bodies.
Not only did those models have a traditional round soundhole, but they also had four f-holes and a sound baffle to try to compete with the newfangled resophonic guitars that were quite loud. But the Gibsons were not well received by consumers, and were eventually discontinued.
In 1934, we redesigned our dreadnought with square shoulders to accommodate a 14-fret neck. That same year, Gibson reintroduced the HG-24 body size with a single round soundhole—no more f-holes or sound baffle—and called it the Jumbo. The Martin Dreadnought and the Gibson J Series guitars are still wildly popular.
I do wonder if they would even exist today if Hawaiian music hadn’t entered the American-pop music sphere in the 1920s?
The tiniest TS on Earth has loads of practical upside and sounds that keep pace with esteemed overdrive company.
Solid Tube Screamer tones in a microscopic machine. Light and easy to affix to anything.
Small enough to lose easily! Vulnerable in the presence of heavy steppers?
$99
Olinthus Cicada
olinthus.com
The Olinthus Cicada’s Tube Screamer-on-a-postage-stamp concept is a captivating one. But contemplating the engineering impetus behind it begs questions: How much area does the pedal and mandatory/included TRRS breakout cable actually conserve? Where do you situate it in relation to other pedals so you can actually tap the bypass—which is the pedal enclosure itself! Would my neighbor’s cat eat it? As it turns out, there’s many good reasons for the Cicada to be.
For starters, small size and light weight on this order are a big deal. Flying with gear is stupid expensive. So, for players that don’t relish the antiseptic aspects of modeling, this micro-analog middle path could be a sensible one. Altogether, pedal and cable are about the size of a set of keys. You can stuff it all in a pocket, put clean laundry in your gig bag, and tour for a while, as long as the rain doesn’t soak your shoes.
All this assumes you roll with very small and very few additional effects. But if you can survive on overdrive alone, you can stick a little adhesive to the back—tape, Velcro, bubblegum, etc.—and affix the Cicada to almost anything. It sounds really good, too! A classic TS application—Fender combo and Stratocaster—yields soulful blues smoke. The same Fender amp and an SG means dynamite, raunchy, and rich Mick Taylorisms. It even does the Iommi stomp pretty well at high gain! I’m still not sure if the Cicada is a solution for a less-than-pressing engineering problem. Nevertheless, it opens up real practical possibilities and sounds more than legit in the process.
Featuring a slim Headlock system, water-resistant shell, and spacious front pocket. Available in classic Black and Ash, as well as new colors Moonlight Blue, Amazon Green, and Burnt Orange.
This brand new design reimagines and elevates the original to new heights, featuring a fresh range of colors and a refined slim Headlock system. The enhanced MONO Sleeve is engineered for durability, featuring industrial-grade webbing handles reinforced with steel rivets and bar-tack stitching, a water-resistant 420D shell, and plush interior lining. A spacious front pocket offers easy access to essentials like cables, tuners, and other gear, while the ergonomic shoulder straps ensure comfort during long-distance commutes. Sleek and compact, the MONO M80 Sleeve 2.0 is the perfect choice for guitarists on the go.
To bring the MONO M80 Sleeve 2.0 to life in the launch campaign, MONO collaborated with renowned guitarist Rock Choi from Seoul, South Korea, known for his bold and precise playing style, and Susannah Joffe, an emerging indie-pop musician from Austin, Texas, USA. Together, the artists showcase the M80 Sleeve 2.0 in a dynamic video set in New York City, demonstrating how effortlessly the case integrates into the urban lifestyle while offering superior protection for their instruments.
The updated Sleeve 2.0 is available in classic Black and Ash, and for the first time in MONO’s history, debuts a range of new colors: Moonlight Blue, Amazon Green, and Burnt Orange, giving artists fresh avenues to express themselves through their gear.
The MONO M80 Sleeve 2.0 features include:
- An ergonomically designed case that is sleek and suited for urban travel, along with comfortable shoulder straps and a tactile side handle for easy carrying.
- A water-resistant 420D shell and plush interior lining, built to military specs and extreme resistance to abrasion and the elements.
- A slim Headlock system, made from shock-absorbing EVA rubber, secures the guitar's neck and headstock, while the EVA insole protects the body and strap pin from impact.
- A spacious front pocket for essentials like laptops and cables, and a small interior mesh pocket for critical items.
- Side-release chest buckles provide added security and a construction reinforced with steel rivets for extra durability.
- Rock-solid, industrial webbing handles that are standard in MONO cases. Bar-tack stitching and steel rivets reinforce strength, while high-grade webbing offers a comfortable grip.
- String guard protection to safeguard your guitar’s strings.