On her debut solo album, Activities, the in-demand bassist flexes feel over flash, converging her upright roots with electric bass playing to make songs that transcend genre.
“I’ve never been particularly interested in listening to people shred on the bass,” explains bassist/composer Anna Butterss. “It’s certainly impressive, but it doesn’t hit me emotionally at all. I’m more interested in how the music feels.” How the music feels perfectly encapsulates the sonic and stylistic kaleidoscope that is Butterss’ debut solo release, Activities. Released on June 24 via Pete Min’s Colorfield Records, Activities represents the musical culmination of the different ideas, concepts, and aesthetic choices that Butterss has been exploring in recent years.
Aside from Butterss’ impressive formal musical education on upright, and the subsequent following she’s gathered in the jazz community, she’s also now five years into playing electric bass and has performed with Aimee Mann, Phoebe Bridgers, and Bright Eyes, among others. These alternative musical experiences permeate the songs on Activities just as much as her work with jazz luminaries Makaya McCraven, Jeff Parker, and Larry Goldings.
Doo Wop
Anchored by Butterss’ kinetic bass playing, the multi-layered soundscapes of Activities effortlessly fuse these seemingly disparate musical genres. Labeled as experimental/ambient jazz, Activities certainly fits that description, but the record also incorporates indie- and world-music elements, and emphasizes atmosphere and composition over all else. From the opening East Asian vibes of “Entrance” to the alternative rumble of brooding synths on “Super Lucrative” to the gorgeous jazz-chamber-like ode of “Blevins” to the creeping, crawling, avant-garde upright bass exercise of “Do Not Disturb,” Butterss’ deftly demonstrates that feel is the definitive muse fueling her creative output and connecting the dots between her broad musical tastes. “I’ve gone between playing a lot of different styles of music,” she admits. “And that seems to have converged pretty organically on Activities, which I’m happy about.”
Butterss started out on upright when she was just 13. She got into what she calls “the nitty-gritty” of playing the upright bass, “a complicated and difficult instrument,” first at the University of Adelaide in Australia (where she’s from) and then at graduate school at Indiana University in Bloomington. She majored in Jazz Bass at both. She also spent much of those formative years learning classical music and playing in orchestras. Though she “dabbled” in electric bass on and off during that time, she didn’t seriously start playing it until about five years ago, after settling in Los Angeles. “I started getting interested in indie-music styles,” she recalls. “It’s not like they necessarily require electric bass, but I felt I’d have more opportunities to play a wider range of music. So, that was the impulse.”
“My dear friend Paul Bryan, who’s a great bass player, and producer and writer, sat down with me and was like, ‘Look, this is what you should buy. This is a good deal, buy this one.’”
Though there are obvious similarities between upright and electric bass, but Butterss says learning to play the latter was like learning a different instrument. “The tuning is the same, the strings are the same, and I guess the function that they play in the music is the same,” she explains. “But that seems really surface-level when you’re dealing with a totally different timbre and a totally different texture. I was surprised at how different they were. I started not thinking of them as related in any way.”
She describes the upright bass as the instrument that she feels the most comfortable on, and the one where she has already developed a sound. When she started playing electric bass, she had to start from square one in learning how to play it. “For the first two years, it really felt like I could play the instrument—I knew where the notes were, I could execute things that I needed to execute in whatever song I was playing, but I don’t know if I necessarily felt like I had a concrete sound or style on the instrument the same way that I did on upright, so that’s definitely been a work-in-progress.”
Anna Butterss recorded her solo debut, Activities, with Pete Min at his studio, Lucy’s Meat Market, in Eagle Rock, California.
When it comes to other bass players, Butterss admits she’s never really been one for direct influences but does namecheck a few OGs of electric bass. “When I started getting into electric bass, I was listening to Willie Weeks, some James Jamerson, a fair amount of Meshell Ndegeocello, who is someone I’m always listening to a fair amount of, really [laughter],” she chuckles. “I listen to a lot of things, and maybe one particular moment or feeling from one song on one record will stand out to me and I’ll carry that with me, but it’s never like, ‘Okay this is the bass player I’m going to play like.’”
The first electric bass she bought was an old Kay K-5924 Semi-Hollow Body from about 1966 or ’67 that she still uses. “I bought it because my dear friend, Paul Bryan [Aimee Mann, Rufus Wainwright], who’s a great bass player and producer and writer, sat down with me and was like, ‘Look, this is what you should buy. This is a good deal, buy this one.’ He was a mentor and someone whose sensibility on the instrument I’ve always appreciated—maybe not specific things about the way that he played, but his general approach to the instrument definitely influenced me.”
Anna Butterss’ Gear
Butterss is an in-demand bassist who has played with Phoebe Bridgers, Aimee Mann, Jenny Lewis, Madison Cunningham, and more.
Photo by Zach Caddy
Basses
- Kay K-5924 (’66 or ’67)
- Guild Starfire II
- 1930s German-made upright bass (unknown maker)
- Realist LifeLine Upright Bass Pickup
Strings, Picks & Accessories
- LaBella 760FS Deep Talkin’ Flats (electric)
- Pirastro Evah Pirazzi Slap (upright)
- Dunlop Tortex Standard 1.0 mm and 1.14 mm
- Mono Bass Cases
Effects
- MXR M234 Analog Chorus
- MXR M133 Micro Amp
- Electro-Harmonix Micro POG
- Moog Minifooger MF Delay
Amps
- Aguilar Tone Hammer 500 (head)
- Aguilar SL 112 (cabinet)
For recording Activities, Butterss went mostly direct with the electric bass. She did bring one of her own basses and played it on one song, but because Activities was recorded at Pete Min’s studio, Lucy’s Meat Market in Eagle Rock, California, she had a lot of “really interesting instruments” at her disposal.
“At the start of the recording process, I was gravitating towards all these semi-hollow-bodies, like Kay and Harmony basses, with really warm sounds,” she attests. “And by the end of the record, everything I was playing was like Jazz bass with the tone rolled all the way off. I got all that warmth out of my system [laughter].”
“By the end of the record, everything I was playing was like Jazz bass with the tone rolled all the way off. I got all that warmth out of my system [laughter].”
One of the recording/mixing strategies Butterss and Min utilized for several bass tracks on Activities was to record the electric bass, convert it to MIDI, and then layer synths on it. “Limitations and Dogma,” for example, which also employs a chorus effect on the bass, displays this technique. “I recorded the electric bass part, which is kind of like a solo, and then we converted it to MIDI and layered some synths on it, and then switched those in and out,” explains Butterss. “We did that on ‘The Worst Thing You Could Do for Your Health,’ too.”
On “Ben,” she stumbled across a happy accident. “On the part at the end, I’d been playing something with an overdrive pedal on guitar and we just plugged the bass into the same [signal] chain, and I forgot to turn off the overdrive, so we started tracking and the bass came in super-hot and distorted, but it ended up being a really cool sound.”
Anna Butterss started playing upright bass at age 13 and studied jazz bass at both the University of Adelaide in Australia (where she’s from) and Indiana University in Bloomington.
Photo by Ted Miller
While the aforementioned tunes exemplify Butterss’ approach to tracking electric bass, “Do Not Disturb” epitomizes her upright sound and technique. Raw, aggressive, and frighteningly fierce, it captures the rhythmic nature of her ability that makes her so desirable to others as a side person.
“I had an idea about how I wanted that song to feel, and I started it on upright, trying to get a weird, creepy, kind of messy-but-driving crazy feeling, and it was really hard to do it,” she explains. “I was in there for a while trying to figure it out, and then Pete and I listened back in the control room, and it’s just me, trying, and then stopping, and then swearing a little bit and then trying again, and, at some point, I’m just like, ‘How do you do this?’ So, we ended up splicing it together, which is what I wanted to do anyway. I wanted it to feel organic, as in acoustic, but also with this weird element of robotic-ness. There’s something alien about it. I wanted it to sound more like a sample, rather than something that we just recorded acoustically with a beautiful sound. And then we converted it to MIDI and layered a synth on top of it to make it sound even weirder. I really wanted it to feel like a hybrid of that fundamental acoustic sound with all these extra layers on top of it.”
“I wanted it to feel organic, as in acoustic, but also with this weird element of robotic-ness—there’s something alien about it.”
When it comes to playing someone else’s music, whether jazz, indie, or otherwise, Butterss says she needs to be thinking about what they want in their music rather than anything to do with the technical aspects of bass playing. “I’m lucky in that most of the people I work with now, at this point in my career, call me because they want me to have my own musical opinions and my own input within their music,” she says. “I feel like I do have a lot of freedom to follow my own instincts.”
Circling back to her earlier sentiment about preferring to follow her senses over shredding, she concludes that she’s at her best when she’s thinking about music as “an act of service. The more I can think of the broader impact of the whole musical landscape, rather than thinking about whatever I’m playing on the instrument, technically speaking, I think the better it is.”
YouTube It—Jenny Lewis: NPR Music Tiny Desk Concert
- Top 5 Bass Rig Rundowns - Premier Guitar ›
- The Bass Is Not a Guitar - Premier Guitar ›
- Esperanza Spalding: Soul Mining - Premier Guitar ›
- On Bass: Layering the Low End - Premier Guitar ›
- Quest for an Acoustic Bass Amp - Premier Guitar ›
- Electric Bass, Upright Sound - Premier Guitar ›
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibson’s EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (It’s easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didn’t look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as you’re able to find today. “Why?” you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ’56), the Longhorn 4623 (’58), and the Shorthorn 3612 (’58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses “baritone guitars,” to add to our confusion today. But these vintage “baritones” were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the “tic-tac” bass sound of Nashville records produced by Chet Atkins, or the “click-bass” tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
“When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye.”
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button “Tone Selector Switch” that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
It’s sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
It’s sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? That’s because the model’s single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul ’Bursts. So as people repaired broken ’Bursts, converted other LPs to ’Bursts, or otherwise sought to give other Gibsons a “Golden Era” sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isn’t original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesn’t have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald City’s $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Bacon’s “Danelectro’s UB-2 and the Early Days of 6-String Basses” Reverb News article, Gruhn’s Guide to Vintage Guitars, Tom Wheeler’s American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmark—including delay time, feedback, and independent rate and depth knobs for the modulation—plus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ’80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.