
The Malian master blows Bill Frisell's mind. The technique, tone, and conceptual breadth of his debut album, Mande Guitar, will astonish you, too.
Boubacar "Badian" Diabaté's debut release, Mande Guitar, will shatter your preconceptions about what the instrument is truly capable of. Don't believe me? Then take it from Bill Frisell, the sonic groundbreaker who practically reinvented the jazz guitar playbook. In Frisell's words, "Boubacar 'Badian' Diabaté blows my mind. He's doing things I've never heard anyone do before."
Comprised of mostly solo guitar gems with occasional overdubs and a smattering of guitar duets (with Badian's brother Manfa Diabaté and producer/African music historian Banning Eyre), Mande Guitar is a musical kaleidoscope, imbued with unexpected moments of jaw-dropping virtuosity. While the album's instrumentation is stripped-down, the original plan was even more austere. Eyre had wanted Badian [that nickname translates as "tall father"] to record a strictly solo guitar album. Along the way, some compromises were made, including the addition of percussionist Baye Kouyaté, who plays tama (talking drum) and calabash on one track, "Fadento." "Some people like to just listen to one instrument, but others like to hear the ambience of an interaction between players, so I wanted to touch both things and strike a balance," says Badian. "Also, when you play solo, you have to cover everything—you have to keep the line, the harmony, and the rhythm, whereas when someone is accompanying you, you're freer to do a lot of things that you can't do if you're playing alone."
Badian Diabaté et Goussou Kouyaté
In Badian's circle of musicians, the cultural norm is that everyone is raised to be an adept multi-instrumentalist. We know that most guitarists can dabble on bass, but in Badian's clique, it's the real deal—there's no faking it. "I usually perform with two or three additional musicians, and we'd switch instruments from song to song. It's very normal to start with one instrument and then move on to another and to experience the music from these different directions. The musicians I play with can play multiple instruments: guitar, ngoni (a 4-string instrument), tama, etc. If I have a drummer, he can typically play the calabash. I've actually made recordings in Mali where I've played all of these instruments. In concert, I mostly play guitar, but I would also play some ngoni or some tama."
A Rich Musical Tradition
Guitar geeks might tune into Mande Guitar for its fretboard fireworks, but for Badian the album serves a greater purpose. "I wanted to show the world the value of this culture," he says. "There's rock 'n' roll, there's jazz. Everything's out there and people know those things, but they don't know that this rich culture exists."
Boubacar "Badian" Diabaté (left) recorded Mande Guitar with his brother, Manfa (right), at Afropop Worldwide's Studio 44 in Brooklyn, New York. In Diabaté's circle of musicians, everyone is a multi-instrumentalist and able to switch duties from song to song. "It's very normal to start with one instrument and then move onto another and to experience the music from these different directions," Diabaté says.
In Badian's case, his rich musical culture dates back several generations. "I was born in a griot family. In the world of griots, people grow up in an environment where music is a traditional profession—my mother was a singer. My father was a functionary, an official in the government of Mali. Although he was a griot, he did not play guitar. It's a world where music is 'the thing' and you're surrounded by all of these instruments." His first instrument, when he was very young, was the tama. From there he went to the ngoni, which a lot of Malian guitarists start on. "Ngoni is the principal instrument of griots in Mali, along with voice," says Badian, "The ngoni is also the closest [traditional] instrument to guitar in Africa, so the natural instinct of a guitarist in the tradition is to try to imitate the ngoni. The guitarist improvises with the sound of the ngoni in his ear." Baidan switched to guitar when he was about 10, after hearing the music of Mande guitar great Bouba Sacko.
"The ngoni is also the closest [traditional] instrument to guitar in Africa, so the natural instinct of a guitarist in the tradition is to try to imitate the ngoni."
The origins of Mande Guitar began in 1995, when Eyre went to Africa to study guitar with Djelimady Tounkara for six months. One day, Badian came over to the house and was introduced by Tounkara, who, with a slight mix of (as Eyre put it) "disapproval and awe," described Badian as a "young player who will surpass me one day." Eyre had a Hohner G3T that Badian really wanted, so Eyre proposed giving Badian the guitar in exchange for permission to film him. "I realized he was a unique talent," Eyre says. A deal was struck and Eyre filmed a two-hour session of Badian playing in both solo and duet (with ngoni) contexts, all taking place in a construction site repurposed as a studio.
Boubacar “Badian” Diabaté’s Guitars
Diabaté has a fondness for electrics without headstocks, and this Steinberger SS-2F, which replaced a Hohner G3T, is his current plugged-in mainstay.
- Steinberger SS-2F
- Traveler Guitar
- Seagull 12-string
Badian and Eyre remained friends, and Badian reached out to Eyre when he came to New York with his wife, singer Nene Soumano, in 2010. Numerous times over the years, Badian asked Eyre for help recording an album, and in 2021, when Eyre launched Lion Song Records, his request was fulfilled. Eyre pegged Badian to record Lion Song's debut offering, Mande Guitar.
Remaking Malian Music
Eight of the cuts on Mande Guitar are traditional Malian songs, and the challenge for Badian was in trying to inject his own diverse musical personality into them while keeping true to the tradition. "I went to the Institut National des Arts de Bamako, which is the best music school in Bamako [Mali's capital], and there I learned Western pop music and jazz, pentatonic music, because there's a lot of pentatonic styles in Mali that's branched from the blues," says Badian. You'll hear such blending in "Bayini," the jazzy chromatic phrases in "Miri" and "Korosa," and some repeating short fragments in "Sakonke" played at hyper-speed à la Carlos Santana. He and Eric Clapton are Badian's favorite Western guitar heroes.
Dressed for his role as griot—a traditional artist who preserves and shares oral history through music, poetry, or storytelling—Boubacar "Badian" Diabaté cradles his Seagull acoustic 12-string. While he also plays 6-string, Diabaté may be one of the finest 12-string acoustic players on the planet.
You'll also hear some unexpected cross-cultural influences on Mande Guitar. "My favorite track is 'Bayini,' which starts with a Mande feel, then jumps into a Spanish flamenco feel," Badian says. "That's to show that Mande music can be fused with any kind of music, because music is universal. But for this record, I wanted to stick mostly to the Mande folklore. You might hear some of that stuff here or there, and on other projects I would bring in a lot more of those influences. But here I went for traditional Mande guitar."
"I wanted to show the world the value of this culture."
Exemplary Technique
In keeping with the traditional right-hand technique of Malian guitar players, Badian plays using his thumb and index finger. This method can look unusual to uninitiated Westerners watching the guitarist use his index finger to pluck in both directions. But Badian plays with an exemplary version of this technique that is impressive and incendiary. "I'm going up and down like a pick," he explains. "The fingernail becomes like a flatpick, and just with the thumb and forefinger I can play four strings. The thumb plays the tonic of the key, which is very defining to the atmosphere of the piece. The thumb's main role is to keep that in the picture at all times. It's not exactly like playing a bass line. Rather, its main role is to emphasize the tonic. However, there are times when the thumb will also contribute to a melody."
TIDBIT: Producer Banning Eyre originally wanted Diabaté to record a solo guitar album, but the guitarist insisted on overdubs and a few duets to add additional colors.
There are a few unusual tunings on Mande Guitar, like F–A–D–G–C–E, but most of the album is in standard tuning, and the album was recorded live with no click track. The only overdubbing was on tracks where Badian accompanied himself.
"The fingernail becomes like a flatpick, and just with the thumb and forefinger I can play four strings. The thumb plays the tonic of the key."
Necessity Is the Mother of Invention
"Right now, I just have two guitars: a 12-string Seagull acoustic and a Steinberger electric," says Badian, whose penchant for headless guitars creates a conundrum of sorts. Double ball strings, as used on the Steinberger and his previous Hohner G3T (which got its neck broken off after being loaned to Badian's brother), are hard to find even in music capitals like New York City and Los Angeles. But where there's a will, there's a way. "Even now, there's no store in Mali where you can buy these kinds of strings. The first thing to do is try to get someone that's going to France to bring you some," explains Badian. "But sometimes I would just make my own double-ball strings. I would cut strings and attach a new ball to them. You take the little ring off another string and wind it very tight."
This Seagull 12-string and Steinberger SS-2F are Badian's only two guitars. Getting strings for the Steinberger is nearly impossible in Mali, so he has them shipped from friends and family in New York or France, or jerry-rigs his own double-ball-end strings.
Badian also sometimes relies on a care package from family for accessories. "I get strings from my brother in New York, and I just use whatever he sends. My preference is medium gauge strings, but I'll work with whatever comes in." His resolve to make any piece of gear work is the antithesis of how GAS-stricken gear nerds roll, and Badian is living proof that tone is, indeed, in the fingers. "When I play a gig, I'll rent an amp, and I'll work with whatever I get. As long as it works, I'll make it sound good."
YouTube It
With transcendent elegance and virtuosity, Boubacar Diabaté, on 12-string, and kora player Ballaké Sissoko team up for a performance at a Parisian festival. Prepare to be blown away by their improvisational genius. It's that simple.
- Music in Exile: The Saga of Songhoy Blues - Premier Guitar ›
- Digging Deeper: African Guitar 101 - Premier Guitar ›
- Rokia Traoré: Global Guitar - Premier Guitar ›
A reverb-based pedal for exploring the far reaches of sound.
Easy to use control set. Wide range of sounds. Crush control is fun to explore. Filter is versatile.
Works best as a stereo effect, which may limit some players.
$299
Old Blood Noise Endeavors Dark Star Stereo
oldbloodnoise.com
The Old Blood Dark Star Stereo (DSS) is one of those pedals that lives beyond simple effect categorization. Yes, it’s a digital reverb. But like other Old Blood designs, it’s such a feature-rich, creative take on that effect that to think of it as a reverb feels not only imprecise but unfair.
The Old Blood Dark Star Stereo (DSS) is one of those pedals that lives beyond simple effect categorization. Yes, it’s a digital reverb. But like other Old Blood designs, it’s such a feature-rich, creative take on that effect that to think of it as a reverb feels not only imprecise but unfair.
In this case, reverb describes how the DSS works more than how it sounds. I’ve come to think of this pedal as a reverb-based synthesizer, where reverb is the jumping-off point for sonic creation. As such, the sounds coming out of the Dark Star can be used as subtle sweetener or sound design textures, opening up worlds that might otherwise be unreachable.
Reverb and Beyond
Functionally speaking, the DSS starts with reverb and applies a high-/low-pass filter, two pitch shifters, each with a two-octave range in each direction, plus bit-crushing and distortion. Controls for lag (pre-delay), multiply (feedback), and decay follow, with mini knobs for volume, mix, and spread. Additional control features include presets, MIDI functionality, plus expression and aux control.
The DSS can be routed in mono, stereo, or mono-in/stereo-out. Both jacks are single TRS, and it’s easy to switch between settings by holding down the bypass switch and selecting via the preset button.
Although it sounds great in mono, stereo is where this iteration of the Dark Star—which follows the mono Dark Star and Dark Star V2—really comes alive. Starting with the filter, both pitch shifters, and crush knobs at noon—all have center detents—affords the most neutral settings. The result is a pad reverb, as synthetic as but less sparkly than a shimmer. The filter control is a fine way to distinguish clean and effect signals. In low-pass mode, the effect signal can easily get dark and spooky while maintaining fidelity and without getting murky. On the other end, high-pass settings are handy for refining those reverb pads and keeping them from washing out the clarity of the clean signal.
Lower fidelity is close at hand when you want it. The crush control, when turned counterclockwise, reduces the bit rate of the effect signal, evoking all kinds of digitally compromised sounds, from early samplers to cell phones, depending on how you flavor it. Counterclockwise applies distortion to the reverb signal. There’s a lot to explore within the wide ranges of the two pitch controls, too. With a four-octave range, quantized in half steps, the combinations can be extreme, and Dark Star takes on a life of its own.
Formless Reflections of Matter
The DSS is easy to get acquainted with, especially for a pedal with so many features, 10 knobs, and two footswitches. I quickly got a feel for the reverb itself at the most neutral filter and pitch settings, where I enjoyed the weight a responsive, textural pad lent to everything I played.
With just the filter and crush controls, there’s plenty to explore. Sitting in the sweet spot between a pair of vintage Fenders, I conjured a Twin Peaks-inspired hazy fog to accompany honeyed diatonic arpeggios, slowly filtering and crushing that sound into a dark, evil low-end whir as chords leaned toward dissonance. Eventually, I cranked the high-pass filter, producing an early MP3-in-a-good-way “shhh” that was fine accompaniment to sparser voicings along my fretboard. It was a true sonic journeyThe pitch controls increase possibilities for both ambience and dissonance. Simple tweaks push the boundaries of possibility in exponentially deeper directions. For more subtle thickening and accompaniment sounds, adding octaves, which are easy to tune by ear, offers precise tone sculpting, dimension, and a wider frequency range. Hearing simple harmonic ideas plucked against celeste- and organ-like reverberations kept me in the Harold Budd and Brian Eno space for long enough to consider new recording projects.
There is as much fun to be had at the highest feedback settings on the DSS. Be forewarned: Spend too much time there and you might need a name for your new ambient band. Cranking the multiply and decay knobs, I’d drop in a few notes, or maybe just a chord, and get to work scanning the pitch knobs and sculpting with the filter. Soon, I conjured bold Ligeti-inspired orchestral sounds fit for a guitar remix of 2001: A Space Odyssey.
The Verdict
The Dark Star Stereo strikes a nice balance between deep control, a wide range of sonic rewards, playability, and an always-sounds-great vibe. The controls are easy to use, so it doesn’t take long to get in the zone, and once you do, there’s plenty to explore. Throughout my time with the DSS, I was impressed with its high-fidelity clarity. I attribute that to the filter, which allows clean and reverb signals to perform dry/wet balance and EQ functions. That alone encouraged more adventurous and creative exploration. Though not every player needs this kind of tone tool, the DSS is a must-check-out effect for anyone serious about wild reverb adventures, and it’s simple and intuitive enough to be a good fit for anyone just starting exploration of those zones. However you come to the Dark Star, it’s a unique-sounding pedal that deserves attention. PG
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beauty–both in sound and appearance–of the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.
Introducing the Gibson Acoustic Specials – J-45, Hummingbird & L-00 Special - YouTube
Great Eastern FX Co. has released the limited-edition OC201 Preamp, featuring vintage Mullard OC201 transistors for a unique fuzz sound. Part of the 'Obsolete Devices' series, this pedal combines classic circuits with modern components for optimal tone and reliability.
Boutique British pedal designers GreatEastern FX Co. have released a new pedal. Limited to just 50 units, the OC201 Preamp is an intriguing twist on the familiar two-transistor fuzz circuit, built around a pair of new-old-stock Mullard OC201 transistors.
“The OC201 is a very early silicon transistor,” company founder David Greeves explains. “It was actually the first silicon transistor made by Mullard, using the same method as their germanium devices. It’s pretty crude by modern standards, with very low gain and limited bandwidth, but that’s exactly what makes it so great in a fuzz pedal.”
This little-known low-gain silicon transistor is responsible for the OC201 Preamp’s palette of sounds, which GreatEastern FX say ranges from dirty boost and garage rock drive sounds up to a raw and richly textured fuzz, all with the excellent volume knob clean-up characteristics this style of fuzz is famous for. The circuit has also been tweaked to deliver a healthy kick of volume to your amp.
This limited-edition pedal is the first in a new series that Great Eastern FX are calling ‘Obsolete Devices’. According to the company, the Obsolete Devices series will feature the company’s take on a range of classic circuits, constructed using a mixture of vintage and modern components. It’s a distinct departure from Great Eastern FX’s main range of pedals.
“With pedals like the Design-a-drive and the XO Variable Crossover, we’re really committed to developing original designs that bring something new to the table,” founder David Greeves explains. “I’m always very conscious of choosing parts that aren’t going to go obsolete so we can go on making the pedals for as long as people want to buy them. But I also love messing around with old parts and classic circuits, which is a totally different mentality. The Obsolete Devices series is basically a way for me to have fun modifying these classic circuits and experimenting with my stash of NOS components, then share the results.
“The name is a little bit of an inside joke,” he continues. “I think what gets labelled as ‘obsolete’ is very subjective. As pedal designers and guitar players, we obsess over obsolete components and what, in any other field, would be considered outdated designs. So the name is a nod to that. I also loved the thought of us coming out with some brand-new Obsolete Devices of our own!”
Alongside the pedal’s new-old-stock Mullard OC201 transistors – which are the reason only 50 of them are being made – the OC201 Preamp uses quality modern components, including high-tolerance Dale metal film resistors and WIMA capacitors. GreatEastern FX say that this hybrid approach, using vintage parts where they make the most difference sonically and low-noise modern parts elsewhere, will deliver the best combination of tone and reliability while also keeping the price from spiralling out of control.
The OC201 Preamp will cost £249 in the UK, $299 in the US and €299 in the EU. It’s available now direct from Great Eastern FX Co. and from the following dealers:
- UK – Andertons
- Europe – Pedaltown.nl
- USA – Sound Shoppe NYC
- Canada – Electric Mojo Guitars
For more information, please visit greateasternfx.com.
Obsolete Devices OC201 Preamp | Great Eastern FX Co. - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.“I do think that PTP circuits should stay that way, and circuits made for PCB sound great and don’t need to be handwired to sound good,” says R2R Electric's Cris Vincent, who is especially adept at creating vintage-flavored fuzz machines.
Do vintage parts make better pedals? Not always.
Treble boosters have been used by legends like Brian May, Tony Iommi, Rory Gallagher, Marc Bolan, Stevie Ray Vaughan—you name it. They have empirically proven their place in the evolution of rock ’n’ roll, and even paved the way for entirely new music genres. Naturally, as a pedal builder, I had to make my own. In fact, I was building treble boosters even before Sehat Effectors was born. Technically speaking, the circuit is simple—just a single transistor and a few components.
Treble booster pedal, Vintage fuzz pedals, R2R Electric effects, Guitar pedal building, Brian May treble booster, Dallas Rangemaster clone, Vintage guitar tones, Recycled pedal components, Boutique guitar pedals, Handmade effects pedals, Analog guitar effects, Point-to-point wiring, DIY guitar pedals, Vintage amplifier tone
But here’s the catch: The results didn’t meet my expectations. At least, not with the setup I had at the time: an old Japanese Iwama Strat copy and a small solid-state practice amp. The sound was terrible—just downright awful! I kept asking myself, “Did I do something wrong? Or was I missing some secret sauce?” My experiments with the treble booster ended up as a long-abandoned project, collecting dust in my workshop.
Years later, I stumbled across R2R Electric on Instagram, and man, I was blown away by this guy. He’s laser-focused on crafting treble boosters using all kinds of old, recycled parts, and they sound amazing! I couldn’t help but be influenced by what he showcased in each post. It was like a masterclass on how he builds treble boosters and how vintage fuzz pedals work their magic.
This curiosity led me to reach out to Cris Vincent of R2R Electric to ask him about his perspective on treble boosters and vintage fuzz.
Can you share the origin story of R2R Electric?
R2R Electric began officially five years ago. I had been saving old parts from reel-to-reel recorders, old radios, and other vintage audio equipment. I had no experience in building pedals, so I didn’t know what to do with all the parts.
One day, I met Tucker [Krishock] of Lamp Electric and asked him to build a Dallas Rangemaster from the parts I had collected. The first time we plugged in, it blew our minds! So, we began “Reel To Reel Effects.” I began practicing copying the pedal Tucker had made me, and selling them on Reverb under the brand “R2R.” Sadly, Tucker ended up passing away, and so I decided to carry on by combining our two names into R2R Electric.
“If you feel better playing a hand-built pedal versus a mass produced one, there’s something to that. Even if it’s only in your head.”
What fascinates you about treble boosters and vintage Fuzzes?
I became obsessed with vintage effects during my time working in recording. I would always be hunting for new tones or to replicate tones from classic records. I had picked up a Roland BeeBaa, which has a fuzz and a treble booster, and I decided to see what the booster sounded like. I loved it! There is something to the simplicity of these old circuits that I feel give a more natural feel and tone. A vintage boost or fuzz needs to be as equal in your rig as the guitar or amplifier—they have that much impact on the overall performance of a rig.
Do you believe vintage effects should ideally be paired with vintage amplifiers?
I think they can sound great through both vintage and modern amps. The drawback with some vintage amps is that they weren’t meant to be hammered by a huge fuzz signal. I’ve had to refine several vintage speakers that couldn’t handle fuzz. Most modern amps are designed with pedals as a fact of life and can handle most of the tones you throw at them. So, from a reliability standpoint, modern amps handle old fuzz pedals a bit better. But for those classic tones, the pairing of a vintage amp and vintage pedal is the only way to get there.
What inspired you to use recycled components?
That was all I had. I have no formal electrical experience, so I didn’t realize that old parts could go bad or be noisy. It took a lot of working with them to realize how unreliable they can be. I also feel like they have a sound that modern components can produce too. Using old parts to build old circuits just makes sense to me.
Do you think there's a tonal difference between PCB construction and point-to-point designs?
I don’t think one sounds better than the other, really. I think it comes down to the original design of the circuit and the limitations of that particular construction type. I do think that PTP circuits should stay that way, and circuits made for PCB sound great and don’t need to be handwired to sound good. The old PTP circuits tend to sound better, but that’s just my opinion. I think it all comes down to everyone’s own personal taste. If you feel better playing a hand-built pedal versus a mass-produced one, there’s something to that. Even if it’s only in your head.
Based on this brief interview, I’ve come to realize just how deeply spiritual and immersive the experience of finding the sound in your head can be. It’s a stark contrast to my own initial disappointment with the treble booster I built—it was something I felt was a failure and quickly discarded. Cris, on the other hand, exemplifies someone who devoted himself with unwavering focus, constantly seeking until he reached that moment of enlightenment—the “eureka” moment—that validated what he had believed in all along.
In a way, what I’ve done—like replacing electric guitar strings with nylon strings—was not technically wrong, but clearly not the right fit. The same principle applies to treble boosters, fuzz pedals, and perhaps many other effects pedals. They each have unique tendencies and characteristics that may be waiting for their own “eureka” moment to truly shine.