
Don Peake wields one of his longtime companions, the Gibson ES-335 model.
The Wrecking Crew guitarist played with the Everly Brothers, the Jackson 5, Marvin Gaye, and many more. He shares memories of hanging with Elvis, the Beatles, and the Stones, long sessions with Phil Spector, recording with Sonny and Cher, and spitballing now-iconic guitar lines ingrained in music history.
The Wrecking Crew was a group of Los Angeles session players who shaped hundreds of hit records in the '60s and early '70s. The list of guitarists often named as crew members includes Tommy Tedesco, James Burton, Glen Campbell, Al Casey, Barney Kessel, and Howard Roberts. More rarely mentioned is Don Peake, who was right there in the studio trenches with them, creating timeless tracks for Phil Spector and others.
Peake later cut hits for Motown as well. If you listen to classic pop radio, you have doubtless heard the iconic opening wah-wah lick to Marvin Gaye's "Let's Get It On" and the guitar line doubling the bass on the Jackson 5's "I Want You Back," but probably never knew it was Peake playing those parts.
Though he appears briefly in The Wrecking Crew movie, it's safe to say Don Peake's place in the world of historic session guitarists is shamefully unsung. It's long past time for this purveyor of iconic guitar parts to be recognized. While many of his peers have departed, Peake luckily remains with us, ready to relay some amazing stories, which he does in this Premier Guitar interview.
"Elvis would come in three nights a week. We'd sit with him in the balcony on the break." āDon Peake
Don Peake was born in Los Angeles, California, on June 7, 1940. During high school, he played clarinet and sang with an a cappella choir. Picking up the ukulele at 16, he eventually moved to guitar. When word got out he could play Gene Vincent's "Be-Bop-A-Lula," it was recommended he try out for a gig with rockabilly singer Jackie Lee Cochran.
"I went to a night club called the Rag Doll," Peake recalls. "In the parking lot was a line of guitarists waiting to audition." Cochran fortuitously asked Peake if he knew "Be-Bop-A-Lula," and an affirmative answer helped him clinch the gig. Opening night, after playing that song, Cochran asked the young guitarist what else he knew. "Nothing," he replied.
Peake managed to keep the job, but to fill in the gaps he quickly signed up for lessons at Clara Joyce Sherman's School of Music in Hollywood. As luck would have it, his guitar teacher was Ray Pohlman, who would go on to be a regular guitarist and bassist in the Wrecking Crew. "Ray was a jazz guitarist who played with the Billy May Orchestra," he says. "He taught me to play and mentored me. I bought my blonde, 1946 Gibson ES-350 with the single pickup from him." A special guitar, indeed: The ES-350 Peake bought from Pohlman was a rare one-pickup jazz model made in 1946. Gibson started making the iconic two-pickup models in 1947.
Here's Peake at work in studio, putting his skill at reading music to work. This is a still from the documentary film The Wrecking Crew.
Working with Cochran helped cement the young guitarist's reputation as a rock 'n' roll player, which led to a gig with Lance LeGault, Elvis Presley's movie stand-in. "LeGault loved Ray Charles' songs and had his sax player write out 'Hallelujah, I Love Her So,' 'Drown in My Own Tears,' etc.," says Peake. "I learned the exact guitar parts, which came in handy later. Elvis would come in three nights a week. We'd sit with him in the balcony on the break."
Learning to read music while playing rock 'n' roll gigs provided Peake a perfect primer for later working with the similarly schooled Wrecking Crew, who also helped create much of the era's teenage music. Another bit of serendipity was hanging out with a young Phil Spector.
"Phil was studying with Howard Roberts," Peake remembers. "I started studying with both Barney Kessel and Roberts. Howard would write out arpeggios for me, while Barney was 'Mr. Time.' He would say, 'You've got a rod connecting your forearm to your foot. You have to tap your foot and keep your arm moving. It doesn't matter if you miss the chord, keep going. Never stop your right hand.'" Spector gave Peake a T-Bone Walker LP, adding a blues influence to the guitarist's jazz and rock background. "T-Bone had those wonderful moving 9th chords," he says.
Shown here in 1972 at an RCA Hollywood Studio session, Peake holds a modified ES-335 that began life as a 12-string, owned by John Phillips of the Mamas & the Papas. Fellow sessioner Paul Herman got it from Phillips and cut down the headstock and painted it black before selling it to Peake, who then used the instrument as his primary studio axe.
Courtesy of Don Peake
Spector's friend Marshall Leib, from his group the Teddy Bears, told Peake that the Everly Brothers were looking for a guitar player. Playing with the Everlys would be his first big gig and place him at the center of the musical revolution taking place in early '60s England.
"We flew to London," he recalls. "After the gig, we went to a night club where a pretty good band was playing." Still wearing their matching gray suits, it was clear that Peake and company were a band as well, so the local performers joined them on their break. Among those locals were Albert Lee and Eric Clapton. In his autobiography, Clapton describes Peake as one of the American guitarists who impressed him as being technically better than he was.
On the next trip to England, the Everly Brothers headlined a tour featuring the Rolling Stones, Bo Diddley, and Little Richard. "As I was watching one of the other acts, I noticed a black man in a full-length peignoir across the stage, holding a bible," he says. "One of the stagehands said, 'That's Little Richard Penniman.'"
"Brother Ray came in and sat down at the piano. He said, 'Do you know 'Hallelujah, I Love Her So?'ācut back to Lance LeGault, making me learn those Ray Charles songsāI said, 'Absolutely.'" āDon Peake
Brothers and band soon started hanging with the Beatles and Stones in Hamburg. "The Star-Club had three stages," says Peake. "We traded sets: Everly Brothers, Rolling Stones, Beatles. Jim Gordon came over as the drummer. He went on to play with Clapton."
During his Everly Brothers tenure, Peake had to leave his 1951 Fender Broadcaster at home. "The Everly Brothers were sponsored by Gibson, so we weren't allowed to use a Fender guitar onstage," he explains. "They gave me a brand new, bright red SG. We were strumming hard, and it would constantly break the 3rd or 4th string. I didn't have a spare guitar, so I would finish the show playing an octave higher."
Once back in Los Angeles, producer Jimmie Haskell heard about Peake and arranged for him to play with Ricky Nelson. "I played on the Adventures of Ozzie and Harriet sessions for a little while," he says. "James Burton was there at the same time. He came in the studio one day and started bending strings. I said, 'How did you do that?' He said, 'I've got an E string, where my G string is supposed to be.' That was the first time we saw anybody play a light G string."
Don Peake bought this blonde 1946 Gibson ES-350 with a single pickup from Ray Pohlman, his guitar mentor and Wrecking Crew bandmate. This rare jazz model was a precursor to the two-pickup model introduced in 1947. Peake's chart-reading and big-band chops were honed while playing in the jazz band at L.A. City College, where this photo was taken in 1960.
Photo courtesy of Don Peake
Peake's sessions with the Wrecking Crew started around 1966 with the Righteous Brothers' "You've Lost That Lovin' Feelin'." That record would define Spector's "Wall of Sound" and become one of the most played radio tunes of all time. A sizable chunk of that "wall" was the guitar section, including Barney Kessel, Howard Roberts, Bill Pittman, Tommy Tedesco, and Peake, all playing together.
"Tommy or Barney would be the first chair," Peake recalls. "There were always three guys playing miked Gibson L-5s. I bought mine from Howard Roberts. The board at Gold Star only had seven channels, so they had all the guitar mics running together on one channel. Phil would have us move around to get the balance. He would rehearse us for three hours. Howard Roberts once said, 'Man, you come out here and play this. I'm getting tired.'"
Peake is featured on another major hit that sounds like a Spector production, but isn't. "One day, I'm up at Armin Steiner's studio and a shaggy-haired guy comes in with a beautiful girl in bangs," he relates. "The producer said, 'This is Caesar and Cleo.' The song was 'Baby Don't Go.' I did the tremolo strumming part."
"Don was the best reader of the three of us and would help us with any problems reading charts." āLouie Shelton
A week later, Ahmet Ertegun heard the duo, changed their name to Sonny and Cher, and ordered a full album, which included the massive hit "I Got You Babe."
"That tune is me on my Fender Telecaster with a lot of reverb," says Peake. "Sonny produced the records. He'd been a gofer for Phil Spector and, like Phil, he was into lots of reverb and long rehearsals. Barney Kessel was sitting next to me. He had played jazz with Charlie Parker and Lady Day [Billie Holiday]. After playing this one F7chord for three hours he said, 'Sonny, if a doctor told me I had only two weeks to live, I'd spend them with you because each moment is like an eternity'."
In 1964, Peake landed a gig with a man whose music had inspired him as a teenager. While recording at Gold Star Studios, he ran into his friend Arthur Wright on the phone with Ray Charles' manager Joe Adams. Wright put Peake on the call.
Don Peake with his boss, the great Ray Charles, in the dressing room before a show in Wichita, Kansas, circa 1993.
Courtesy of Don Peake
"Adams said, 'Ray Charles is looking for a guitar player," he recalls. "We've tried 35 guys and can't find anybody who can play the blues, read music, play jazz, and already knows Ray's old songs, because we've lost some of that music.' I said, 'I'm white.' He said, 'Can you play?' I said, 'Yes.' He said, 'Get down here.'"
Peake grabbed his Deluxe Reverb, Gibson L-5, and ES-350, and drove to the studio, where he hauled all three up a flight of stairs. With his hands full, he kicked open the rehearsal room door, slamming it into the wall.
"Staring at me were five saxophones, four trombones, four trumpets, bass, drums, an empty piano chair, and an empty guitar chair," he says. "I'd been playing with the jazz band at L.A. City College, so I knew how to read big band charts. The drummer called an up-tempo Count Basie blues and I started playing that L-5 as fast as I could. Leroy Cooper, the baritone player, leaned over to Lily Fort, the lead singer of the Raelettes, and said, 'That boy is serious.' Then they said, 'Get out your electric.' I picked up the 350 and we did 'Jumping with Symphony Sid.' Brother Ray came in and sat down at the piano. He said, 'Do you know 'Hallelujah, I Love Her So?'ācut back to Lance LeGault, making me learn those Ray Charles songsāI said, 'Absolutely.'"
Joe Adams informed Peake that Charles wanted to hire him at $200 a week. "I told him the Everly Brothers were paying $225," says Peake. Adams said he would have to talk to Mr. Charles. Fearing he had blown the gig of a lifetime, Peake drove to his mother's house, where he lived when he was off the road. "She said, 'Joe Adams called," he recalls. "They're going to pay you $225, but give you a separate envelope for the $25, so the rest of the band doesn't know about it.'" Thus, Don Peake became the first white guitarist to play with Ray Charles.
Don Peake peeks out of a Sonny and Cher sandwich while backing up the iconic duo at L.A.'s Hollywood Bowl in 1966.
Courtesy of Don Peake
Before they hit the road, Charles recorded a live album. During the show, he began playing the introduction to "Makin' Whoopee"āa song for which there was no chart. "I had never played it with him," says Peake. "When he goes up a half-step on the dominant you can hear me slide into it. I'm learning the song onstage while they're recording it."
Peake continued recording with Charles even after he stopped touring with him, cutting classics like "America the Beautiful" and "Crying Time." He can be heard loud and clear on a lesser-known Charles cover, "Blue Moon of Kentucky," playing the signature intro and the solo over the fade. Toward the end of the track, you hear Charles exhorting the guitarist, "Play it! Play it 'til it gets good." Rather than being critical, according to Peake, he is encouraging him. "He's saying, 'Keep going. It's good,'" Peake says.
While "Blue Moon of Kentucky" is a deep cut, the guitarist's soulful blues licks on the massive Charles hit "Let's Go Get Stoned" have been heard by countless millions through the decades. Though the tone sounds Fender-ish, the guitar was an old Gibson ES-175. "I restrung it with real light strings," Peake explains. "I ended up not liking it, but I did use it on that recording."
In 1966, Peake was asked to go on the road with Bobby Darin, but told Darin he wanted to stay in town and be an arranger. A week went by before he got the call from the singer's managers. "I went to their office, where they played me 'If I Were a Carpenter' by Tim Hardin," he says. "They wanted strings and I'd never written for strings before. I went home, opened up the Russell Garcia arranging book [The Professional Arranger Composer], and feverishly figured out how to write the string quartet. When we recorded at Gold Star, I stood near the studio door so I could get out quickly. When the strings came in, I thought, 'That sounds all right,' and started walking back into the studio." This Bobby Darin hit would mark the beginning of an arranging and scoring career that would ultimately replace Peake's session work, but the guitarist still had some classics to cut.
"There are certain guitar licks or solos that always give me goose bumps, and Don Peake's opening part on 'Let's Get It On' is one of those." āDenny Tedesco
By 1969, Motown had started recording in Los Angeles. Diana Ross was going to produce the first Jackson 5 record with Ben Barrett as contractor. For the Ross-produced record, Barrett put together a band that included Peake, David T. Walker, and Louie Shelton on guitar, Wilton Felder on bass, and Gene Pello on drums. "On 'I Want You Back,' I doubled the bass line with Wilton," he recalls. "I had to read it."
Peake was quite good at that, Louie Shelton recalls. "Don was the best reader of the three of us and would help us with any problems reading charts," Shelton says.
In addition to doubling one of the most famous bass parts of all time, Peake appears on much of the Jackson's subsequent output. That's his Coral electric sitar on "Maybe Tomorrow" from Third Album and his early fuzz pedal shaping the memorable distorted part on "ABC." "I also had a Cry Baby wah," says Peake. "It said Thomas Organ Company, Sepulveda, California, on the bottom." He doesn't remember if it was him or Wah Wah Watson, aka Melvin Ragin, playing the wah part on the Jacksons' "Never Can Say Goodbye," but he is very clear about who played the memorable intro to Marvin Gaye's "Let's Get It On." As with many Peake performances, there's a fascinating backstory.
"There was a fabulous guitarist named RenƩ Hall who was also a great arranger," he relates. "Hall started using me because of my blues playing. He actually had me come in and finish a B.B. King album. B.B. had walked away from the record company and wouldn't talk to them. They had already recorded the songs but needed guitar fills, so I did them."
Peake stands beside bassist Wilton Felder on an early Jackson 5 session. Peake played essential parts on some of the group's early, barnstorming hits.
Courtesy of Don Peake
In 1973, Hall was the arranger on "Let's Get It On," working at Motown's L.A. studio on Romaine Street. "RenƩ said, 'I want you to make up something at the beginning'," says Peake. "I turned on my wah-wah pedal and played." As was so often the case in those days, Peake's name was left off the album. Wah Wah Watson was on the road with Gaye at the time, so everyone assumed he played the part. "It's me," says Peake. "I made a terrible mistake about 15 seconds in," he says. "I got excited and hit the open G string." (Editor's note: Actually, it's 13 seconds in, and you can hear it clearly.)
"There are certain guitar licks or solos that always give me goose bumps and Don Peake's opening part on 'Let's Get It On' is one of those," says Denny Tedesco, director of The Wrecking Crew movie and son of Tommy Tedesco.
In addition to playing on some of the biggest hits of the day, Peake played on numerous movie scores. Though his excellent reading skills no doubt played a part, sometimes it was his rock 'n' roll heart that landed him the job.
"I played for Elmer Bernstein on the Steve McQueen movie Baby the Rain Must Fall," he says. "Bernstein called me because, though Tommy Tedesco could pretend to be musically ignorant, I just naturally came up with stuff that was unsophisticated. Bernstein said, 'Just do whatever you want.' On the soundtrack, you'll hear me playing all this crazy guitar."
As the 1970s progressed, with guitarists like Larry Carlton, Jay Graydon, and Steve Lukather coming up, sessions began drying up for Peake's generation of musicians. The guitarist looked toward composing and arranging for the next chapter of his musical life, but to be successful he found he had to fully commit. He began studying arranging and composing with Albert Harris, a famed Hollywood orchestrator, and called composer/conductor and frequent session contractor Ben Barrett to bow out of his studio guitarist role. "He didn't say the words, 'Are you out of your fucking mind?'ābut I know he was thinking it," says Peake. Sane and serious, he sold the instruments in his cartage trunk and devoted himself to a career that would provide compositions and arrangements for more than 50 movies and television shows, including Knight Rider and My Two Dads.
For the last decade, Peake has been a professor at Los Angeles' Bridges Academy, a school for gifted children that have learning differences, such as autism and ADHD. "I teach guitar, jazz, and blues," he says. "Our music program allows these children to put both sides of their brain together. They get better at their studies."
As of this writing, Peake is still playing with some of the surviving members of the Wrecking Crew, including Chuck Berghofer, the bassist who played the slithery part on Nancy Sinatra's "These Boots Are Made for Walking."
"Don Randi is playing piano," he says. "The drummer is Ed Green. We do a Glen Campbell tribute, because we played on his records. We also do a Sonny and Cher song. We were just about to go on the road, when COVID hit."
This just scratches the surface of Peake's extraordinary life. Did we mention he was a champion race car driver? While there may be no official designation of who was in the Wrecking Crew, by any definition, Don Peake deserves mention as a member of that historic assembly. Maybe even more important is the mark his guitar playing left on memorable Motown tunes that have become embedded not just in music history, but in the culture at large.
Don Peake Essential Listening:
Description: Don Peake recorded tracks with Ray Charles even after he stopped touring with the pianist, cutting classics like "America the Beautiful" and "Crying Time." Peake can be heard loud and clear on a lesser-known Charles cover, "Blue Moon of Kentucky," playing the signature intro and the solo over the fade. Toward the end of the track, you hear Charles saying to Peake with enthusiasm, "Play it! Play it 'til it gets good."
Description: Peake played the guitar line doubling the bass on the Jackson 5's "I Want You Back." In addition to complementing one of the most famous bass parts of all time, Peake appears on much of the Jackson 5's subsequent output. He plays a Coral electric sitar on "Maybe Tomorrow" from 1970's Third Album, and that's also Peake's early fuzz pedal shaping the memorable distorted part on "ABC" from the same year.
Description: In 1966, Peake was asked to go on the road with Bobby Darin, but declined because he wanted to stay put and be an arranger. A week later, Peake got a call from the singer's managers to arrange strings for "If I Were a Carpenter." Peake had never written parts for strings before, but quickly figured out how to write for a string quartet. This Bobby Darin hit would mark the beginning of an arranging and scoring career that would ultimately replace Peake's session work.
- Beyond Blues: Scotty Moore's Raucous Rockabilly Licks - Premier ... āŗ
- Forgotten Heroes: Reggie Young - Premier Guitar āŗ
- Forgotten Heroes: Carol Kaye - Premier Guitar āŗ
- 'Reunion!' Bruce Formanās Love Affair With Barney Kesselās Guitar - Premier Guitar āŗ
Just like guitarists, audiophiles are chasing sound. It may be a never-ending quest.
āWhat you got back home, little sister, to play your fuzzy warbles on? I bet you got, say, pitiful, portable picnic players. Come with uncle and hear all proper. Hear angel trumpets and devil trombones.āāAlexander DeLarge (Malcolm McDowell) in the film A Clockwork Orange.
We listen to recorded music for enjoyment and inspiration, but few of us expect recordings to rival the experience of live music. Most guitarists know that the average home sound system, let alone Bluetooth boomboxes, cannot reproduce the weight and depth equal to standing in a room with a full-blown concert guitar rig. Also, classical music lovers recognize that a home system wonāt reproduce the visceral envelope of a live orchestra. Still, much like guitarists, audiophiles spend huge amounts of time and money chasing the ultimate ārealisticā audio experience. I wonder if sometimes thatās misguided.
My exposure to the audio hobby came early, from my fatherās influence. My dad grew up in the revolution of home electronics, and being an amateur musician, he wanted good reproduction of the recordings he cherished. This led him to stock our home with tube components and DIY electrostatic hybrid speakers that rivaled the size and output of vintage Fender 2x12s. I thought this was normal.
Later, I discovered a small shop in my hometown that specialized in āhigh endā audiophile gear. They had a policy: No sale is final until you are completely satisfied. I became an almost weekly visitor (and paying customer) and was allowed to take equipment home to audition, which was dangerous for a young man on a low budget. It was through this program I started to understand the ins and outs of building a cohesive system that met my taste. I began to pay much more attention to the nuances of audio reproduction. Some gear revealed a whole new level of accuracy when it came to acoustic or vocal performance, while lacking the kick-ass punch I desired of my rock albums. I was seeking reproduction that would gently caress the sounds on folk, classical, and jazz recordings, but could also slay when the going got heavy. This made me a bit of an odd bird to the guys at the audio shop, but they wanted to please. With their guidance I assembled some decent systems over time, but through the decades, I lost interest in the chase.
Recently, Iāve begun perusing online audiophile boards and they seem oddly familiar, with tube versus solid-state discussions that might feel at home to guitaristsāexcept the prices are now beyond what Iād imagined. For the most part, they mirror the exchanges we see on guitar boards minus the potty-mouth language. Enthusiasts exchange information and opinions (mostly) on what gear presents the widest soundstage or most detailed high-frequency delivery, all in flowery language usually reserved for fine wines.
Speaking of whining, youāll rethink your idea of expensive cables when you hear folks comparing 18", $1,700 interconnects for their DACs. Some of the systems Iāve seen are more costly than an entire guitar, amplifier, and studio gear collection by a serious margin. Mostly, the banter is cordial and avoids the humble-bragging that might go along with the purchase of a $10,000 set of PAF humbuckers. Still, I have a lack of insight into what exactly most are trying to accomplish.
If youāve ever worked in a big-time studio, you know that the soundscape blasting out of huge monitors is not what most of us have in our homes. My experience rewiring pro-studio patchbays is that less emphasis is placed on oxygen-free, silver-plated, directional cables than the room treatment. Iāve found myself wondering if the people on those audio boardsāwho have spent many tens or even hundreds of thousands of dollars on their home systemsāhave ever been in a studio control room listening to music as loud as a 28,000 horsepower traffic jam of NASCAR racers. That might be an eye-opener.
One of my takeaways is that even though music recording began as an attempt to reproduce what actually happens in a room, it hasnāt been just that for a long time. With all our effects and sonic wizardry on display, recording is like playing an instrument itself, and much more complex. This is not a new revelation to Beatles fans.
What amazes me is that both audiophiles and guitar fanatics pursue the sounds we hear on recordings for differing reasons and with subjective results. Itās a feedback-loop game, where we chase sounds mostly exclusive to the studio. So, how do we determine if our playback is accurate? Will we ever be satisfied enough to call the sale final?
Iām not convinced, but just the same, Iāll continue my own search for the holy grail of affordable, kick-ass sound that still loves a folk guitar
Mooer Prime Minimax M2 Intelligent Pedal boasts 194 effects models, 80 preset slots, MNRS and third-party sample file compatibility, an 80-minute looping module, internal drum machine, high-precision tuner, Bluetooth support, and a rechargeable lithium battery.
Over the last few years, Mooer has released several Prime multi-effects devices, including the Prime P1, P2, S1, and most recently in 2024, the Prime Minimax M1. Excitingly, the company is kicking off 2025 with a brand new addition to the Prime familyāthe Prime Minimax M2 Intelligent Pedal.
Within this small multi-effects device, a whole lot of functionality is packed in, including an impressive 194 effects models, including overdrive, preamp simulators, cabinet models, delays, reverbs, modulation effects, etc., and more. In typical Mooer style, though, the company took things a step further by offering limitless flexibility through the support of its in-house MNRS sample files, as well as third-party IR sample files. Essentially, this means that users can download additional tonal emulations and effects from the Mooer Cloud and third-party sources to the device, which they can then save across 80 preset slots.
As with some past models in the Prime series, the M2 sports a convenient touchscreen design, facilitating easy browsing through the devices banks of presets. However, guitarists are not limited to interfacing with the pedal in this way, as it also features two footswitches, both of which can be used to switch between presets in each bank. There is even a MIDI jack built into the device, enabling users to connect their MIDI controllers to extend the control functions, and the MOOER F4 wireless footswitch support is also supported. Essentially, these augmentation options facilitate additional footswitches to ensure switching preset tones is always as quick and seamless as possible within any workflow.
While the Prime M2 Intelligent Pedal is primarily designed for effects and tonal simulations, it also comes packed with an array of other useful features. For example, it contains a looping module with a hefty 80-minute capacity, in addition to 10 recording save slots to ensure that any looping creations can be kept for future use in performances. Similar to past looper modules in Mooer's products, users are also free to overdub their recordings and even undo or redo their overdubs, offering a lot of real-time flexibility for creating loop-based musical structures.
As if the addition of a looper wasnāt enough, this feature is also synchronizable with an internal drum machine and metronome, a combination that includes 56 drum grooves and 4 metronome varieties. Ultimately, itās a reminder that Mooer clearly recognizes and wishes to solve the struggles that musicians have when attempting to produce precise loops while staying in time. Upon commencing recording, the drum machine can produce four initial beats to serve as a count-in cue, and of course, this can be combined with the device's tap-tempo control for dynamic use. Best of all, this feature can also be applied to modulation and delay effects, ensuring that they work perfectly in time with any performance.
Extra features are included to complete this all-in-one pedal, including a high-precision tunerwith fully customizable frequency ranges. Guitarists can even leverage the M2ās built-inBluetooth input support, allowing them to practice, jam, and even produce looped musicalstructures over their favorite backing tracks, band prototypes, and musical pieces.
Perhaps unsurprisingly for existing Mooer product users, the Prime M2 also boasts an impressive variety of audio routing systems. As was previously mentioned, that includes Bluetooth input, as well as industry standards such as dual-channel stereo output, perfect for stereo delay and modulation effects. It also supports headphone output for those who wish to practice in silence, and even OTG recording, which means that guitarists can record their creations directly to their smartphone whilst on the go.
Speaking of on-the-go, Mooer is continuing its recent portable-play focus with the Prime M2Intelligent Pedal, as it is fitted with a built-in rechargeable lithium battery with a battery life of up to 6 hours. Ultimately, this means that even a lack of local power sources wonāt get in the way of rehearsals and live performances. Combined with the pedalās lightweight and small build, it truly is an ideal addition to the pedalboard of any traveling musician.
Overall, the Prime M2 Intelligent Pedal is set to be an impressive new addition to the Prime series. It features augmented functionality when compared to past models, yet still in a minimalist and easy-to-use package, keeping the size small and light yet still packing in footswitches, a touch screen, and other flexible control systems.
Features:
- 194 built-in effect models and tonal emulations
- 80 preset slots for storing downloaded MNRS and third-party sample files
- Compatibility with the MOOER Cloud tone-sharing platform
- Built-in 80-minute looping module
- Record, overdub, pause, delete, and playback functions for looping
- Internal drum machine module, stocked with 56 drum grooves
- 4 unique metronomes
- Synchronization between drum machine and looper
- Convenient count-in cue function support from the metronome
- High-precision and customizable tuner module
- 2 multi-function footswitches
- 1.28-inch touchscreen interface
- LED digital display
- LED charge indicator
- Portable USB/OTG recording
- Direct compatibility with the MOOER prime mobile APP and MOOER Studio desktop software for preset management
- Bluetooth 5.0 audio playback
- 3000mAh integrated lithium battery with up to 6 hours of use time
- DC 5V/2A power supply and charging
- 3 hours charging time
- Low weight of 228g
- Compact, at 74mm (L), 125mm (W), and 49mm (H)
- Sample rate of 44.1kHz
- Bit depth of 24bit
- Compatible with MOOER F4 wireless footswitch
- 3.5mm MIDI port
- Mono TS Ā¼ā input
- Stereo TS Ā¼ā output
- 3.5mm headphone output
- Power switch button
The Prime Minimax M2 Intelligent Pedal will be available from the official distributors or retailersworldwide.
For more information, please visit mooeraudio.com.
Hereās Chris Martin surrounded by a group of guitars created to commemorate his familyās 192-year history.
The home organ once ruled the world, only to go extinct. Is the acoustic guitar next?
When I was growing up, my Aunt Kate had a home organ in her living room. Back then, home organs were everywhere. They were sold at malls across America, and were a staple of post-WWII households. Brands like Lowrey, Magnus, and Hammond dominated the market. Lowrey, a division of Norlin (which eventually acquired Gibson), was especially massive. In fact, in a year where Gibson generated $19 million in revenue, Lowrey pulled in a staggering $100 million.
But like all booms, the home organās success was temporary. By the 1980s, it had gone bust. A huge contributing factor was the entrance of Casio: a more affordable, portable alternative that rendered the home organ obsolete.
Thankfully, the acoustic guitar has always had portability on its side. Iāve witnessed three major acoustic-guitar booms in my lifetime: the folk and folk-rock explosion of the late ā50s through the late ā70s, the MTV Unplugged resurgence, and most recently, the COVID-era surge.
The ā80s, however, were a tough time for acoustic guitar builders. That decade belonged to pointy electric guitars and hair metal. But the acoustic guitar came back. And unlike the home organ, it has not only endured, but thrived.
My great-grandfather capitalized on the demand for mandolins in the early part of the 20th century. We also tried to make and sell banjos. In addition to that, we made archtops, and although they werenāt as popular as some other brands, we did borrow the 14-fret neck.
While we were making 12-fret guitars with steel strings (the real benefit of that era was a dramatic improvement in the quality of steel strings), we discovered that many players wanted more access to the body and a slimmer profile. Starting with a 000-size guitar, we quickly converted many of our models to the new modern neck design, most notably our dreadnought model. The timing was right, as the dreadnought became the go-to guitar for country music. The steel-string flattop would lend itself to a fantastic melding of styles and types of music from around the world (and around the corner), becoming the driving voice of not just country, but also folk and many other genres.
Baby boomers (myself included) grew up with the sound of the acoustic guitar, and playing the music of our youth remains an essential part of any enthusiastās repertoire. Our generation is not only large but also living longer, thanks to modern medicine and healthier lifestyles. Many of us have accumulated wealth, and for those of us in the business of making and selling guitars, thatās good news.
I mean no disrespect when I say, āThank goodness I wasnāt born into the worldās most famous accordion-making family.ā Accordions had their day, just as the home organ once did. Interestingly, accordions still have a niche following, whereas the home organ is now a historical artifact. While home organs were, for a time, all the rage, I doubt that even at the peak of their popularity anyone owned more than one. Quite a different situation when it comes to guitars and guitar collecting.
I do wish I could share with my ancestors how popular the guitar continues to be.
Every so often, someone writes an article with a headline like, āIs the Guitar Dead?ā My answer is simple: no.
As long as we boomersāand everybody elseākeep playing.
The collection includes Cobalt strings with a Paradigm Core, Tim Henson Signature Classical Strings, and the Tim Henson Signature FretWrap by Gruv Gear.
Engineered for maximum output, clarity, and durability, these strings feature:
- Cobalt with a Paradigm Core (not RPS) for added durability
- Nano-treated for maximum lifespan and corrosion resistance
- Gauges 9.5, 12, 16, 26, 36, 46 (Turbo Slinky set)
- Available individually or as part of the Tim Henson Signature Bundle
Tim Henson Signature Classical Strings
Crafted for dynamic, percussive tonality, these strings pair fluorocarbon trebles with silver-plated copper basses to deliver exceptional response and clarity.
- Gauges: 24, 27, 33, 30, 36, 42
- Available individually or as part of the Tim Henson Signature Bundle
Tim Henson Signature FretWrap by Gruv Gear
An essential string-dampening tool, the Tim Henson Signature FretWrap is designed for cleaner playing by eliminating unwanted overtones and sympathetic vibrations.
- Features Tim Hensonās custom āCherub Logoā design
- Size Small, fits 4-string basses, 6-string electric/acoustic guitars, and ukuleles
- Ideal for live performance and studio recording
- Ernie Ball collaboration with Gruv Gear
- Available individually or as part of the Tim Henson Signature Bundle
The Ernie Ball Tim Henson Accessory Bundle Kit
For players who want the complete Tim Henson experience, the Ernie Ball Tim HensonSignature Bundle Kit includes:
- Tim Henson Signature Electric Strings (9.5-46)
- Tim Henson Signature Classical Strings (Medium Tension)
- Tim Henson Signature FretWrap by Gruv Gear (Small)
- Tim Henson Signature Cable (Exclusive 10ft white dual-conductor cable, only available in the bundle)
The Tim Henson Signature String & Accessory Collection is available starting today, March 19, 2025, at authorized Ernie Ball dealers worldwide.
For more information, please visit ernieball.com.