
Over the course of all these Rig Rundowns, we see a lot of pedalboards! Here are 13 of our favorites from the past year, from Billy Strings, Nile Rodgers, Rodrigo y Gabriela, Sunn O))), and more.
Billy Strings
Billy Strings’ Pedalboard
Bluegrass’ biggest ambassador has continued expanding his sound with more pedals and more modeling. When Billy wants to turn his acoustic into space dust, he’s got a hearty squadron of willing vaporizers. This is where Strings tap dances each night—an incredible feat given how much he’s already doing with his hands. A RJM Mastermind GT MIDI switcher is the brains of the operation as it engages all his pedals and the Kemper’s SLO-100 profile. The Grace Design BiX gives FOH a clean, pure acoustic sound. A pair of Mission Engineering SP-1 expression pedals handle manipulating time-based and modulation effects. His two Ernie Ball 40th Anniversary Volume Pedals bring in Leslie effects and the Kemper. A TC Electronic Ditto Looper remains on the board since our last encounter. A Peterson StroboStomp HD covers any on-the-fly tuning needs during his sets. Nashville’s XAct Tone Solutions built out this tonal headquarters, which features several of their custom devices and routing boxes. A couple Strymon Zuma units power everything on the floor, while a duo of Radial boxes helps organize. (The SGI-44 talks to the rack-mounted JX44, and the JDI is a passive direct box designed to handle gobs of levels without any unwanted crunch.)
Here’s a peek behind the scenes, into the inside of Strings’ rack. Starting at the top left, he has a Voodoo Lab Sparkle Drive, Electro-Harmonix Micro POG, MXR Bass Envelope Filter, Source Audio EQ2, Boss DD-8 Digital Delay, Source Audio C4 Synth, and a Strymon Lex. A Strymon Ojai powers the pedals in this drawer. Moving to the right, he has a Jam Pedals Waterfall, Boss SY-1 Synthesizer, EHX Pitch Fork, Red Panda Raster, and an Eventide H9. All of these gizmos are powered by a Strymon Zuma. Going down to the bottom left, Strings assembles this drawer with a NativeAudio Pretty Bird Woman, a Chase Bliss Wombtone, Source Audio Nemesis, DigiTech Polara, Boss DC-2W Dimension C, and an EHX Freeze. Another Strymon Zuma powers all these creatures. The final drawer houses a Chase Bliss Audio Mood, EHX Intelligent Harmony Machine, and a Chase Bliss Automatone MKII Preamp. Everything comes to life with a final Strymon Zuma.
Blu DeTiger
Blu DeTiger’s Pedalboard
“I haven’t gone through that phase of using crazy pedals yet. Live, I just really love the sound of a clean bass tone,” admits bassist DeTiger. Whether slapping on TikTok, headlining solo tours, performing with Jack Antonoff and Olivia Rodrigo, or improvising over her DJ set, this board represents her go-to gear. Each piece in this cast of characters gets used for specific moments. She uses the octave up on the Electro-Harmonix Micro POG for “shredding” and the sub octave setting to “change the vibe for a second.” The Electro-Harmonix Bass Big Muff enhances some of the POG’s shadings with added stank. The EarthQuaker Devices Spatial Delivery is used for the funky intro to “enough 4 u,” her collaboration with Chromeo. She prefers the Spatial Delivery to the Mu-FX Micro-Tron III (which doesn’t get used at all now) and the MXR Analog Chorus is engaged for one instance. The Boss RE-2 Space Echo sees action with the Strat for “Sonic Youth freakouts” during “Kinda Miss You.” A Boss TU-3 Chromatic Tuner keeps all four strings in line and a Voodoo Lab Pedal Power 2 Plus provides the volts.
Christone “Kingfish” Ingram
Kingfish’s Pedalboard
Christone “Kingfish” Ingram is well on his way to becoming the blues’ newest 6-string ruler and he doesn’t use much gear to get the job done. Kingfish’s signal starts with a Shure BLX4 Wireless Receiver, which hits a Boss TU-3W Tuner. From there, the route is a Dunlop Cry Baby Mini Wah, a Marshall Shredmaster, and a Boss DD-3 Delay, all powered by Strymon. The pedals live on a Pedaltrain Nano board and were assembled by Barry O’Neal at XAct Tone Solutions.
Emily Wolfe
Emily Wolfe’s Pedalboard
“If I get a new piece of gear, I have to figure out every single part of it before I can really use it,” the shreddin’ Texan confessed to PG while talking about her 2021 album, Outlier. That sensible curiosity has led her to dialing in precise parameters on the pedals and creating colossal combos with singular gain staging. Her silver bullet is the EarthQuaker Devices Tentacle Analog Octave Up, running into a Fulltone OCD, and an MXR Six Band EQ. Wolfe claimed to PG, “That’s the sound that belongs to me.” The sequence creates a “crazy fuzztone” from the overdrive. Then she uses the EQ to reduce some of the lows and boost the mids for a sound she says will get her guitar to cut through any mix.
Other spices in the rack include an Analog Man King of Tone, an EarthQuaker Devices Dirt Transmitter fuzz, an Ibanez Analog Delay Mini, an Origin Effects Cali76 Compact Deluxe, a Walrus Audio Julia, and a Strymon Flint. The Empress Buffer puts the Delay Mini and Flint outside the RJM Mastermind PBC’s control.
Underneath the hood, Wolfe has tucked in a pair of MXR M109S Six Band EQ pedals (one hitting the King of Tone and the other hitting the OCD), an Electro-Harmonix Pitch Fork, the EarthQuaker Devices Tentacle, and a couple of Strymon power supplies (Ojai and Zuma).
Hermanos Gutiérrez
Estevan Gutiérrez’s Pedalboard
The Gutiérrez brothers pack light. You can see that Estevan Gutiérrez utilizes nearly every square inch of his pedalboard. Overlaps between the brothers’ boards include the MXR Dyna Comp Mini, the Strymon Flint, and the Strymon El Capistan. You might think their setup is basic now, but they used to play sans pedals. Eventually, Estevan discovered the Strymon El Capistan, and their sound was never the same. “I remember that day,” he recounted to PG about first playing the pedal. “I fell in love. I knew it was gonna change something in our sound.” As soon as he purchased the El Capistan, he called his brother and said, “You have to buy this. This is gonna be next level for us.”
The remaining effects for Estevan include a Malekko Omicron Vibrato, a Boss RC-500 Loop Station, and a Boss TU-3 Chromatic Tuner (off the board) keeps his Gretsch in check. Lastly, you’ll notice a G7th Performance 3 ART Capo on the pedalboard, too.
Alejandro Gutiérrez’s Pedalboard
Alejandro, who plays guitar and lap steel, relies on this compact board that holds a MXR Dyna Comp Mini, a Boss GE-7 Equalizer, a Strymon Flint, and the influential Strymon El Capistan. While Estevan discovered the El Cap and unlocked its magic for Hermanos Gutiérrez, Alejandro has molded it to his sound in different ways. “I use it as a layer,” he explains. “Really subtle. My brother uses it more as a delay. He has this horse sound, like this galloping sound he can create with his slapping, which only he can do.” A Boss TU-3 keeps his guitars in line.
Nile Rodgers
Nile Rodgers’ Pedalboard
The Hitmaker doesn’t drown in effects. Instead, Rodgers maintains a simple, sophisticated signal chain into his Fender Hot Rod Deville. Rodgers uses a Pedaltrain Classic 2, loaded up with an Eventide PowerMax Power Supply. The Eventide feeds a Korg Pitchblack Chromatic Tuner, a Boss DD-3 Digital Delay, an Ibanez CS9 Stereo Chorus, a Mad Professor Snow White AutoWah, an Ibanez TS808 40th Anniversary Tube Screamer, and a Jam Pedals Wahcko Wah Pedal. The stompboxes are all wired together with Reference Laboratory RIC-01 cabling.
Rodrigo y Gabriela
Rodrigo Sánchez’s Pedalboard
The eclectic, trailblazing guitar maestros blend acoustic and electric sounds in their respective rigs. The pickup return from Sánchez’s wireless rack goes to the volume pedal via a Lehle 3at1 switcher, then out to a Lehle P-Split signal splitter. The direct out from the P-Split goes to another Lehle splitter, while the ISO line out runs to the rest of the pedals before ending up at a Fractal. (The ISO out of the first splitter goes to the JHS Mini A/B pedal into the Boss OC-3, then to a separate channel on the desk.) His tone-shapers include an MXR Micro Amp, TWA WR-3 Wah Rocker, MXR Analog Chorus, and a Boss DD-3 Digital Delay. He stays in tune thanks to a Boss TU-3S Chromatic Tuner. It’s all powered by a pair of Truetone 1 Spot Pro CS7 power supplies.
Gabriela Quintero’s Pedalboard
It doesn’t get much simpler than this. Quintero’s pedalboard funnels the acoustic’s first two channels—the undersaddle and the body’s piezos—into a stereo volume pedal. From there, they run through a Dunlop Cry Baby and a Boss DD-3 Digital Delay. The signal is then split, with the first side going back to the DI, and the second running through a Dunlop volume pedal into a Boss OC-3 for an extra bottom octave.
Sunn O)))
Stephen O’Malley’s Pedalboard
Drone metal overlords Stephen O’Malley and Greg Anderson use volume as an aesthetic. “My concept in playing this music for tone involves many, many, many different gain stages that are all intonated differently depending on the pitch of the sound,” O’Malley told us last year. “There are slight shades of color saturation or grain as if it’s a paint—the shorter bandwidth color gradation or the density of the paint.” All these subtle sweeps of saturation, sustain, and feedback are enlivened and exaggerated with Stephen’s pedal palette. His current collection of slaughtering stomps includes the band’s most recent collaboration with EarthQuaker Devices (Life Pedal V3), an Ace Tone FM-3 Fuzz Master, a Pete Cornish G-2, and an EarthQuaker Devices Black Ash. For subtler shadings, he has a J. Rockett Audio Designs Archer.
The EQD Swiss Things creates effects loops to engage the FM-3, G-2, or the Black Ash. In addition, he runs a Roland RE-201 Space Echo through the Swiss Things. O’Malley uses the Aguilar Octamizer as a “fun punctuation that comes on once in a while” that “abstracts the guitar into minimalist electronics.” The custom Bright Onion Pedals switcher keeps the amps in sync with phase controls and ground lifts. A Peterson StroboStomp HD keeps his Travis Bean in check. Off to the side of the board is a Keeley-modded RAT that initiated the band’s core sound, plus a Lehle Mono Volume. This circuit includes the heralded LM308 chip and was the basis for their partnership with EQD and the Life Pedal series.Elevated off the stage floor and secured by a stand are O’Malley’s Roland RE-201 Space Echo and Oto Machines BAM Space Generator Reverb.
Greg Anderson’s Pedalboard
“To be honest with you, I try to keep it pretty simple now because I love pedals and have fallen down a lot of rabbit holes with them, but I found myself troubleshooting and having more issues than my sound warranted. When I started with this band, it was just a RAT and tuner pedal, so I try to just bring what I need,” says Anderson. He found a potent pairing with the EQD Life Pedal V2 acting as a boost and running into a vintage Electro-Harmonix Civil War Big Muff that creates a “powerful, chewy, ooze” tone. Like O’Malley, he also has a custom Bright Onion Pedals box and an Aguilar Octamizer set to unleash a “ridiculous, beating, fighting, chaotic, sub-bass sound.” An Ernie Ball VP JR handles dynamics, a Boss TU-2 Chromatic Tuner keeps his Les Paul in shape, and an MXR Mini Iso-Brick powers his pedals.
The Flaming Lips
Steven Drozd’s Pedalboard
Given the nature of the Flaming Lips’ expansive and deranged sounds, you wouldn’t be blamed if you thought Drozd would have a rack of pedals or three tethered boards. But you’d be wrong—as he’s currently touring with nine stomps and an Ernie Ball volume pedal. Doing a lot of the heavy lifting is the Boss GT-1000CORE. The other sonic scalpels and sizzlers are a Subdecay Liquid Sunshine, a duo of Universal Audio units—a Starlight Echo Station delay and Golden Reverberator—a TC Electronic Spark Booster, a ZVEX Fuzz Factory, a Source Audio Nemesis Delay, a Keeley Electronics 30ms Automatic Double Tracker, and a Boss EQ-200 Graphic Equalizer.
Unknown Mortal Orchestra
Ruban Nielson’s Pedalboard
The New Zealand guitarist is a tone tactician. He’s never been satisfied with stock sounds and a pedal’s inherent limitations. “If I find a pedal I like, I use it for a long time and then I try to build a clone to see if I can improve on it,” he explains. “I sit around in my basement tweaking it plugged in—on the breadboard—and changing out different components and adjusting the trim until I get everything just exactly how I want it.” So, looking down at his stomp selection you’ll notice a few nondescript devices on the beautiful Twin Peaks Woodworks pedalboard custom-built by both Nielson’s tech Ben Gram and Caspian guitarist Jonny Ashburn.
His signal hits an Effectrode PC-2A Tube Compressor (you’ll notice two on the board—one is a backup). He enjoys how the PC-2A up front fattens his entire sound, and how it smooths and shaves off the transient tinges. The Strymon Deco has a stereo out that hits a pair of JAM Pedals RetroVibes. Both are set to have slightly different speeds and depths so that they really take that stereo signal for a journey in real time, and they’re panned in the PA to amplify this effect.
One of Nielson’s creations shows up inside the gray box titled “Octave Magic,” which is based on the Foxx Tone Machine. The suede purple devil next to it is the JAM Fuzz Phrase LTD, about which Nielson says, “It’s the wooliest, most musical Fuzz Face I’ve ever played.” Sometimes the answer to Nielson’s problems is the Benson Germanium Boost. “If something’s wrong,” he explains, “I’ll kick on that pedal and it makes everything louder and resets the gain structure.” The Gamechanger Audio Plus pedal sees a lot of action throughout the set: It helps Nielson seam the tail end of a solo and discreetly rejoin the band in rhythm mode.
The remaining pedals include a Boss DD-3 Digital Delay (a gift from Mike Baranik), a Danelectro Back Talk reverse delay, an Electro-Harmonix Holy Grail reverb, and in the top-left corner, an unnamed pedal that Nielson built that is currently not in the signal. (He can’t remember if it’s a RAT or Tube Screamer clone.) Utility boxes include a Boss TU-3 Chromatic Tuner, an Electro-Harmonix Switchblade Plus channel selector, and a Lehle Little Dual II switcher.
Do you overuse vibrato? Could you survive without it?
Vibrato is a powerful tool, but it should be used intentionally. Different players have different styles—B.B. King’s shake, Clapton’s subtle touch—but the key is control. Tom Butwin suggests a few exercises to build awareness, tone, and touch.
The goal? Find a balance—don’t overdo it, but don’t avoid it completely. Try it out and see how it changes your playing!
The author dials in one of his 20-watt Sonzera amps, with an extension cabinet.
Knowing how guitar amplifiers were developed and have evolved is important to understanding why they sound the way they do when you’re plugged in.
Let’s talk about guitar amp history. I think it’s important for guitar players to have a general overview of amplifiers, so the sound makes more sense when they plug in. As far as I can figure out, guitar amps originally came from radios—although I’ve never had the opportunity to interview the inventors of the original amps. Early tube amps looked like radio boxes, and once there was an AM signal, it needed to be amplified through a speaker so you could hear it. I’m reasonably certain that other people know more about this than I do.
For me, the story of guitar amps picks up with early Fenders and Marshalls. If you look at the schematics, amplifier input, and tone control layout of an early tweed Fender Bassman, it’s clear that’s where the original Marshall JTM45 amps came from. Also, I’ve heard secondhand that the early Marshall cabinets were 8x12s, and the roadies requested that Marshall cut them in half so they became 4x12s. Similarly, 8x10 SVT cabinets were cut in half to make the now-industry-standard 4x10 bass cabinets. Our amp designer Doug Sewell and I understand that, for the early Fender amps we love, the design directed the guitar signal into half a tube, into a tone stack, into another half a tube, and the reverb would join it with another half a tube, and then there would be a phase splitter and output tubes and a transformer. (All 12AX7 tubes are really two tubes in one, so when I say a half-tube, I’m saying we’re using only the first half.) The tone stack and layout of these amps is an industry standard and have a beautiful, clean way of removing low midrange to clear up the sound of the guitar. I believe all but the first Marshalls came from a high-powered tweed Twin preamp (which was a 80-watt combo amp) and a Bassman power amp. The schematic was a little different. It was one half-tube into a full-tube cathode follower, into a more midrange-y tone stack, into the phase splitter and power tubes and output transformer. Both of these circuits have different kinds of sounds. What’s interesting is Marshall kept modifying their amps for less bass, more high midrange and treble, and more gain. In addition, master volume controls started being added by Fender and Marshall around 1976. The goal was to give more gain at less volume. Understanding these circuits has been a lifelong event for Doug and me.
Then, another designer came along by the name of Alexander Dumble. He modified the tone stack in Fender amps so you could get more bass and a different kind of midrange. Then, after the preamp, he put in a distortion circuit in a switchable in and out “loop.” In this arrangement, the distortion was like putting a distortion pedal in a loop after the tone controls. In a Fender amp, most of the distortion comes from the output section, so turning the tone controls changes the sound of the guitar, not the distortion. In a Marshall, the distortion comes before the tone controls, so when you turn the tone controls, the distortion changes. The way these amps compress and add harmonics as you turn up the gain is the game. All of these designs have real merit and are the basis of our modern tube–and then modeling—amplifiers.
Everything in these amps makes a difference. The circuits, the capacitor values and types, the resistor values and types, the power and output transformers, and the power supplies—including all those capacitor values and capacitor manufacturers.
I give you this truncated, general history to let you know that the amp business is just as complicated as the guitar business. I didn’t even mention the speakers or speaker cabinets and the artform behind those. But what’s most important is: When you plug into the amp, do you like it? And how much do you like it? Most guitar players have not played through a real Dumble or even a real blackface Deluxe Reverb or a 1966 Marshall plexi head. In a way, you’re trusting the amp designers to understand all the highly complex variations from this history, and then make a product that you love playing through. It’s daunting, but I love it. There is a complicated, deep, and rich history that has influenced and shaped how amps are made today.
Lenny Kravitz’s lead-guitar maestro shares how his scorching hit solo came together.
Hold onto your hats—Shred With Shifty is back! This time, Chris Shiflett sits down with fellow west coaster Craig Ross, who calls in from Madrid equipped with a lawsuit-era Ibanez 2393. The two buddies kick things off commiserating over an increasingly common tragedy for guitarists: losing precious gear in natural disasters. The takeaway? Don’t leave your gear in storage! Take it on the road!
Ross started out in the Los Angeles band Broken Homes, influenced by Chuck Berry, Buddy Holly, and the Beatles, but his big break came when he auditioned for Lenny Kravitz. Kravitz phoned him up the next day to tell him to be at rehearsal that evening. In 1993, they cut one of their biggest hits ever, “Are You Gonna Go My Way?” Ross explains that it came together from a loose, improvisatory jam in the studio—testament to the magic that can be found off-leash during studio time.
Ross recalls his rig for recording the solo, which consisted of just two items: Kravitz’s goldtop Les Paul and a tiny Gibson combo. (No fuzz or drive pedals, sorry Chris.) As Ross remembers, he was going for a Cream-era Clapton sound with the solo, which jumps between pentatonic and pentatonic major scales.
Tune in to learn how he frets and plays the song’s blistering lead bits, plus learn about what amps Ross is leaning on these days.
If you’re able to help, here are some charities aimed at assisting musicians affected by the fires in L.A:
https://guitarcenterfoundation.org
https://www.cciarts.org/relief.html
https://www.musiciansfoundation.org
https://fireaidla.org
https://www.musicares.org
https://www.sweetrelief.org
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editor: Addison Sauvan
Graphic Design: Megan Pralle
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
Tobias bass guitars, beloved by bass players for nearly half a century, are back with the all-new Tobias Original Collection.
Built for unrivaled articulation, low-end punch, and exceptional ergonomics, the all-new Tobias Original Collection comprises an array of six four and five-string bass models all offered in both right and left-handed orientations. The Tobias range features Classic, Killer B, and Growler models, and each is equipped with high-quality hardware from Babicz and Gotoh, active electronics from Bartolini, and the iconic Tobias asymmetrical neck design. Crafted from the finest tonewoods, Tobias Original Collection bass guitars are now available worldwide on Gibson.com, at the Gibson Garage locations, and at authorized Gibson dealers.
The bass world has been clamoring for the return of the authentic, high-end Tobias basses, and now, Tobias has returned. Combining the look and tone of the finest exotic tonewoods, such as quilted maple, royal paulownia, purpleheart, sapele, walnut, ebony, and wenge, with the feel of the famous Tobias Asym asymmetrical neck and the eye-catching shapes of the perfectly balanced contoured bodies, Tobias basses are attractive in look and exceptional in playing feel. However, their sonic versatility is what makes them so well suited to the needs of modern bassists. The superior tone from the exotic hardwoods, premium hardware, and active Bartolini® pickups and preamps results in basses with the tonal flexibility that today’s players require. Don’t settle for less than a bass that delivers everything you want and need –the look, the feel, and the sound, Tobias.
“I’m thrilled to release Tobias basses, emphasizing the use of exotic woods, ergonomics, and authenticity to the original Tobias basses,” says Aljon Go, Product Development Manager for Tobias, Epiphone, and Kramer. “This revival is a dream come true, blending modern craftsmanship with the timeless essence of Tobias.”
“It’s amazing to see this icon of the bass world return,” adds Andrew Ladner, Brand Manager for Epiphone and Kramer. “These models are truly a bass player’s bass, and true to the DNA that makes Tobias world-class—the ace up the sleeve of bass players around the globe since 1978. Today’s players can find that unique voice and feel that only Tobias can offer.”
For more information, please visit gibson.com.