
Yves Jarvis’ methods for simulating effects include using a whammy bar while riding his guitar’s volume for reversed guitar sounds. But many are done the old-fashioned way: manipulating tape on his TEAC reel-to-reel as it passes from one head to another.
Embracing battered 6-strings, lo-fi tech, tunings du jour, and his own restless muse, the singer-songwriter does whatever he can to make his guitar-playing life difficult.
Yves Jarvis—born Jean-Sébastien Yves Audet—is allergic to being complacent. “I don’t like to tune my guitar live,” the Canadian-born singer-songwriter says about his almost irrational fear of creative ennui. “I don’t even have a tuner. I like to make my entire set in the same tuning—that’ll be an alternate tuning, it’ll be something random. I force myself to find a way to reinterpret all my songs in the same tuning.”
In fact, Jarvis chooses one tuning for an entire tour. He does that although each of his songs first comes to life—as it is being written and recorded—in an original song-specific tuning. But tunings, at that early stage, are just compositional devices. Once a song is recorded, its tuning is forgotten, and when it’s time to hit the road, he relearns each song in the new tuning chosen for that tour. If he decides to reprise an older song, he learns it up yet again in that new tuning as well.
All that learning and tuning keeps Jarvis on his toes, which he finds exciting. “I get stuck in too many patterns, too many shapes, so I throw myself off,” he says. “I love being thrown off.”
Yves Jarvis - "Bootstrap Jubilee"
What was the tuning Jarvis used on his recent summer tour? Good question.
“I’m in D–A–D-something, that’s for sure,” he says. To figure out the rest, he brought his laptop—we spoke via Zoom—into another room with a piano. “Someone once asked me about my tuning at a show, and people think I’m being coy, but I actually don’t know what it is. I know how to get there with a guitar, but I don’t know what the notes are.”
He tuned up his guitar by ear, sat at the piano, and figured it out. It didn’t take long. His summer 2022 tuning was D–A–D–E–A–C#. It won’t be that again.
That type of unpredictable spontaneity is how Jarvis does everything. That explains his addiction to cheap gear, his aversion to pedals—which he never uses—and why he didn’t even bother with an amp on The Zug, his latest release, which he recorded at ArtScape, the artist-friendly place he was living in at the time. “It’s a subsidized-for-artists condo in Toronto [where rents are sky high] and the building is full of artists,” he says.
Yves Jarvis recorded his fourth album, The Zug, at Toronto’s ArtScape, a subsidized living space for artists. The Zug is a masterclass in lo-fi guitar orchestration on a limited budget.
The Zug is Jarvis’ fourth release since 2016 under the moniker Yves Jarvis (Jarvis is his mother’s maiden name), and prior to that he released the critically acclaimed Tenet under the name Un Blonde. In 2019, he was longlisted for a Polaris Music Prize. The Zug is an intimate collection of songs, and that means intimate, as in up close and personal. The vocals sound as if he’s whispering in your ear and letting you in on a joke. Jarvis plays all the instruments himself, and that includes an array of alternative timbres and sounds. “Noise was an issue,” he says about the challenges of recording in a condominium. “Nevertheless, I was playing the drums with chopsticks, but that was for feel, not for noise suppression.”
Chopsticks aside, most of the effects on The Zug were done with guitar. On songs like “At the Whims” and “Enemy,” Jarvis employs dramatic swells and backwards-sounding leads, which complement the more subtle fingerpicking and gentle warbles on “Prism Through Which I Perceive” and “You Offer a Mile.” The album is also a masterclass in lo-fi orchestration. Check out “Why” and, especially, “Stitchwork,” with its string-sounding pulses and layered effects that are, in a simple way, almost Beatle-esque. All done with guitar, and on a very limited budget.
But lo-fi also has its share of challenges. “I need to invest in a vocal mic because it would be nice to not have to do 100 takes of the same thing,” Jarvis says about his idiosyncratic multi-layered vocal sound. “It started out as an aesthetic thing, being that I wanted to create this texture that was inspired by D’Angelo—many voices at once, perfectly stacked. But then, layering became a necessity because I was not pleased with the single takes. In order for all the nuances of my voice to translate to the recording, I have to have multiple layers.”
“But I’m not averse, at all, to effects. I have just always gotten off on forcing myself to simulate my own effects.”
That labor-intensive effort is how Jarvis gets his guitar tones as well. As mentioned, he doesn’t use pedals. “I can’t imagine looking down at a pedalboard, frankly,” he says. “I think I’m getting there in my growth as an artist where I see the potential of using pedals. But that’s precisely the problem—too much potential. Although I see where I could benefit with experimenting with new tech.”
The distortion sounds were created by running his guitar into an old TEAC reel-to-reel machine—and a single, loved, beaten reel of tape—and then into the open-source DAW Audacity, which is ultimately where everything ends up. “It’s nice to manipulate sound with such an analog piece,” he says about his tape machine. “I also like stretching and distorting the tape. I’ve never really used a different reel of tape. It’s been the same reel on there for years and years and years, and the degradation of that reel has really played into the sound of the guitar. I think the best example of it on the record is at the end of ‘What?’ That electric guitar solo is the most quintessential sound of my TEAC, for sure.”
But Jarvis’ aversion to pedals doesn’t come from some purist notion of tone craft. Rather, similar to choosing a new tuning for each tour, he sees limitations as a creative tool, albeit with ideological strings attached. “Constraints are very helpful for me,” he says. “I don’t like options—especially in our culture today where everything is custom. You go into a restaurant, and you can customize your order, I hate that. Tell me what to get, or don’t tell me what to get, but constrain me. Two options are all I need. That’s where the experimentation comes from—from some sort of physical parameter like playing percussion backwards, for example, so that the feel is different—just little things like that. But I’m not averse, at all, to effects. I have just always gotten off on forcing myself to simulate my own effects.”
Yves Jarvis’ Gear
Yves Jarvis plays solo acoustic at the Colony in Woodstock, New York, in February 2022. His acoustic is a Fender he bought for $50 in Gravenhurst, Ontario.
Photo by Michael O’Neal
Guitars
- Fender acoustic
- Hondo Formula I
- Yellow S-style
Recording/Sound Manipulation
- Tascam Portastudio 424 MkIII
- TEAC Reel to Reel
Strings
- Any brand, heavy gauge, usually starting with a .012 for the high E
Jarvis’ methods for simulating effects aren’t completely outlandish. His reversed guitar sounds—which you can hear on The Zug’s “Enemy”—are done with a whammy bar and riding his guitar’s volume knob. Some of his delay-like effects are done the old-fashioned way: manipulating tape as it passes from one head to another.
Yet despite his embrace of the reel-to-reel, his first love is a Tascam Portastudio 424 MkIII multitrack cassette recorder. “I’ve gone through maybe a dozen Tascam 424 MkIIIs,” he says. “That’s the only piece of gear that I know about, which is crazy. Ten years ago, I got them for $100 bucks a pop every time. Now they’re $1,000 bucks.”
Another outgrowth of his quest for unpredictability is how Jarvis uses a capo, which he often places high up on the neck at around the 8th or 10th fret. He prefers it like that, with the strings taut, similar to a smaller-scale instrument like a ukulele or mandolin. It opens up a very different world of harmonics and other sonic possibilities, although he has more pedestrian reasons for using a capo, too, which is the difference in how he sings live versus the studio.
Once Jarvis records a song, its tuning is forgotten. When it’s time to hit the road, he relearns each song in a new tuning chosen for that tour. His 2022 tuning was D–A–D–E–A–C#.
Photo by Michael O’Neal
“I like my voice to be like a whisper on recordings, but live I like to really sing,” he says. “That’s the thing: The textural qualities that I’m looking to lay down on the record are not at all similar to what I’m trying to do live. Live, I like to be clear-eyed vocally, and with recordings I want it to be more of a whisper. That’s the main impetus for the capo, too. I usually perform the song much higher than the recording—although I also use a capo because I usually use pretty shitty gear—and I like the guitar to have that twang, that sharpness of a mandolin or something very taut.”
In Jarvis’ telling, that sharpness can take on a somewhat mystical feel as well. He’s searching for a certain synchronized resonance between his voice and the instrument’s natural vibrations. “I’m definitely making an effort to match those resonances,” he says. “The guitar on the chest, the guitar on the belly, and amplifying that, and amplifying each other. I feel that is a very deconstructive process in the studio, and then live it’s something that I’m trying to have as a unit, a package of songwriting.”
And just in case you think Jarvis doesn’t do enough to avoid becoming complacent, his instruments of choice are usually low-budget starter guitars, which, obviously, come with their own issues and quirks.
“I’m excited to plug in a cool guitar that I just got back. It’s a guitar I’ve had since I was a little kid: an electric Hondo. It’s an Explorer shape. It’s red and it’s got all these stripes on it.”
And his electric?
“I’m excited to plug in a cool guitar that I just got back,” he says. “It’s a guitar I’ve had since I was a little kid: an electric Hondo. It’s an Explorer shape. It’s red and it’s got all these stripes on it. I left it at my buddy’s when I lived in Calgary as a kid, and then he had it for 10-plus years. He fixed it up for me. He just gave it back and it sounds amazing. That’s a guitar that I’m really excited to have back because it’s just so dirty and gritty and sounds just straight off Neil Young’s Everybody Knows This Is Nowhere, which is a beacon for me in terms of electric guitar tone.”
It’s not a gimmick. Jarvis is a unique, forward-thinking artist, and, ultimately, the tricks he employs make for engaging, compelling music—music that takes on new life with every retelling. “Because of the improvisational nature of the production, relearning my music and restructuring it in a more traditional format is really an exciting thing for me,” he says.
It’s exciting for his listeners, too.
Yves Jarvis - Full Performance (Live on KEXP at Home)
In this intimate acoustic performance recorded for Seattle’s KEXP radio, Yves Jarvis plays five songs with assistance from his faithful capo.
After eight years, New Orleans artist Benjamin Booker returns with a new album and a redefined relationship to the guitar.
It’s been eight years since the New Orleans-based artist released his last album. He’s back with a record that redefines his relationship to the guitar.
It is January 24, and Benjamin Booker’s third full-length album, LOWER, has just been released to the world. It’s been nearly eight years since his last record, 2017’s Witness, but Booker is unmoved by the new milestone. “I don’t really feel anything, I guess,” he says. “Maybe I’m in shock.”
That evening, Booker played a release celebration show at Euclid Records in New Orleans, which has become the musician’s adopted hometown. He spent a few years in Los Angeles, and then in Australia, where his partner gave birth to their child, but when he moved back to the U.S. in December 2023, it was the only place he could imagine coming back to. “I just like that the city has kind of a magic quality to it,” he says. “It just feels kind of like you’re walking around a movie set all the time.”
Witness was a ruminative, lonesome record, an interpretation of the writer James Baldwin’s concept of bearing witness to atrocity and injustice in the United States. Mavis Staples sang on the title track, which addressed the centuries-old crisis of police killings and brutality carried out against black Americans. It was a significant change from the twitchy, bluesy garage-rock of Booker’s self-titled 2014 debut, the sort of tunes that put him on the map as a scrappy guitar-slinging hero. But Booker never planned on heroism; he had no interest in becoming some neatly packaged industry archetype. After Witness, and years of touring, including supporting the likes of Jack White and Neil Young, Booker withdrew.
He was searching for a sound. “I was just trying to find the things that I liked,” he explains. L.A. was a good place for his hunt. He went cratedigging at Stellaremnant for electronic records, and at Artform Studio in Highland Park for obscure jazz releases. It took a long time to put together the music he was chasing. “For a while, I left guitar, and was just trying to figure out what I was going to do,” says Booker. “I just wasn’t interested in it anymore. I hadn’t heard really that much guitar stuff that had really spoke to me.”
“For a while, I left guitar, and was just trying to figure out what I was going to do. I just wasn’t interested in it anymore.”
LOWER is Booker’s most sensitive and challenging record yet.
Among the few exceptions were Tortoise’s Jeff Parker and Dave Harrington from Darkside, players who moved Booker to focus more on creating ambient and abstract textures instead of riffs. Other sources of inspiration came from Nicolas Jaar, Loveliescrushing, Kevin Shields, Sophie, and JPEGMAFIA. When it came to make LOWER (which released on Booker’s own Fire Next Time Records, another nod to Baldwin), he took the influences that he picked up and put them onto guitar—more atmosphere, less “noodly stuff”: “This album, I was working a lot more with images, trying to get images that could get to the emotion that I was trying to get to.”
The result is a scraping, aching, exploratory album that demonstrates that Booker’s creative analysis of the world is sharper and more potent than ever. Opener “Black Opps” is a throbbing, metallic, garage-electronic thrill, running back decades of state surveillance, murder, and sabotage against Black community organizing. “LWA in the Trailer Park” is brighter by a slim margin, but just as simultaneously discordant and groovy. The looped fingerpicking of “Pompeii Statues” sets a grounding for Booker to narrate scenes of the homelessness crisis in Los Angeles. Even the acoustic strums of “Heavy on the Mind” are warped and stretched into something deeply affecting; ditto the sunny, garbage-smeared ’60s pop of “Show and Tell.” But LOWER is also breathtakingly beautiful and moving. “Slow Dance in a Gay Bar” and “Hope for the Night Time” intermingle moments of joy and lightness amid desperation and loneliness.
Booker worked with L.A.-based hip-hop and electronic producer Kenny Segal, trading stems endlessly over email to build the record. While he was surrounded by vintage guitars and amps to create Witness, Booker didn’t use a single amplifier in the process of making LOWER: He recorded all his guitars direct through an interface to his DAW. “It’s just me plugging my old Epiphone Olympic into the computer and then using software plugins to manipulate the sounds,” says Booker. For him, working digitally and “in the box” is the new frontier of guitar music, no different than how Hendrix and Clapton used never-heard-before fuzz pedals to blow people’s minds. “When I look at guitar players who are my favorites, a lot of [their playing] is related to the technology at the time,” he adds.
“When I look at guitar players who are my favorites, a lot of [their playing] is related to the technology at the time.”
Benjamin Booker's Gear
Booker didn’t use any amps on LOWER. He recorded his old Epiphone Olympic direct into his DAW.
Photo by Trenity Thomas
Guitars
- 1960s Epiphone Olympic
Effects
- Soundtoys Little AlterBoy
- Soundtoys Decapitator
- Soundtoys Devil-Loc Deluxe
- Soundtoys Little Plate
“I guess I have a problem with anything being too sugary. I wanted a little bit of ugliness.”
Inspired by a black metal documentary in which an artist asks for the cheapest mic possible, Booker used only basic plugins by Soundtoys, like the Decapitator, Little AlterBoy, and Little Plate, but the Devil-Loc Deluxe was the key for he and Segal to unlock the distorted, “three-dimensional world” they were seeking. “Because I was listening to more electronic music where there’s more of a focus on mixing than I would say in rock music, I think that I felt more inspired to go in and be surgical about it,” says Booker.
Part of that precision meant capturing the chaos of our world in all its terror and splendor. When he was younger, Booker spent a lot of time going to the Library of Congress and listening to archival interviews. On LOWER, he carries out his own archival sound research. “I like the idea of being able to put things like that in the music, for people to just hear it,” says Booker. “Even if they don’t know what it is, they’re catching a glimpse of life that happened at that time.”
On “Slow Dance in a Gay Bar,” there are birds chirping that he captured while living in Australia. Closer “Hope for the Night Time” features sounds from Los Angeles’ Grand Central Market. “Same Kind of Lonely” features audio of Booker’s baby laughing just after a clip from a school shooting. “I guess I have a problem with anything being too sugary,” says Booker. “I wanted a little bit of ugliness. We all have our regular lives that are just kind of interrupted constantly by insane acts of violence.”
That dichotomy is often difficult to compute, but Booker has made peace with it. “You hear people talking about, ‘I don’t want to have kids because the world is falling apart,’” he says. “But I mean, I feel like it’s always falling apart and building itself back up. Nothing lasts forever, even bad times.”
YouTube It
To go along with the record, Booker produced a string of music videos influenced by the work of director Paul Schrader and his fascination with “a troubled character on the edge, reaching for transcendence.” That vision is present in the video for lead single “LWA in the Trailer Park.”
Note the cavity cover on the back, which houses the components of Andy Summers’ mid-boost system.
We’ve covered Andy’s iconic guitar and what makes it so special, so now we’ll get to building our own.
Hello and welcome back to Mod Garage for the second installment of the Andy Summers Telecaster wiring. We covered many of the details of this unique guitar last time, so now we’ll jump right in to assembling your own.
In general, you can use any Telecaster and convert it to Andy Summers’ specs. If you want to stay as close as possible to the original guitar, the way to go is an alder body—just like Andy’s, which is 2-piece—with a 3-tone sunburst finish and white double binding.
The neck should be quarter-sawn, 1-piece maple with a C profile, 21 vintage-style frets, and a 7.25" fretboard radius. Of course, you can choose your own specs here, too. The original guitar has a brass nut rather than bone or plastic, and it should be no problem to find a brass nut blank for a Telecaster. You will need different tools to work on it compared to bone, plastic, or graphite, so keep this in mind. If you do not have the right tools or don’t feel comfortable making nuts, you should leave this task to your local guitar tech. Summers’ guitar has Schaller M6 tuning machines, which are still available from the German Schaller company, and two chrome butterfly string trees. You may not really need two of them—usually one for the B and the high E string will do the trick, especially with a well-made nut.
The original has a heavy brass bridge plate with six individual brass saddles, which will increase overall weight significantly. You can still buy this type of brass bridge from several companies, but there are much lighter bridges on the market.
The stereo output jack is installed in a rectangular chrome plate, like on a Les Paul, which I think is superior to the typical Telecaster jack cup. Interestingly, the plate on Summers’ guitar is only held by two of four screws, but do yourself a favor and use all four to make this spot as strong as possible. You should attach the plate really tight, especially when you use an output jack with a tight grip for the plug.
“Electronically, there is nothing too specialized that you will need for the controls.”
The rest of the hardware is chrome and standard: two regular strap buttons, a standard Telecaster control plate, ’60s Telecaster flat-top knobs, a black ’60s-style top-hat switch knob on the 3-way pickup selector switch, and two flat-lever mini-toggle switches. You should have no problem getting all of these parts from any guitar shop. The pickguard is a 3-ply mint green pickguard with a standard humbucker routing for the neck pickup.
Electronically, there is nothing too specialized that you will need for the controls: a standard 3-way pickup selector switch, two 250k audio pots for master volume and master tone, a gain control pot for the booster, and two additional mini DPDT on-on toggle switches for switching the booster on and off and for the phase control of the bridge pickup. The resistance of the gain control pot depends on the booster you want to use: e.g. for the Fender Clapton mid-boost kit, a 500k type will work great.
For the bridge pickup, there is a standard early-’60s-style Telecaster single-coil pickup, and every pickup company will have something like this in their catalog. Because the bridge pickup is installed to an out-of-phase mini-toggle switch, your pickup will need three conductors, with the metal base plate separated from the pickup’s common ground, and a third wire that connects the bridge plate individually to ground. If you have a regular two-conductor model, you need to break this connection, soldering a third wire directly to the base plate.
Interestingly, the bridge pickup on Summers’ Tele is installed directly into the wood of the pickup’s cavity. I see no reason why you shouldn’t install it the regular way on your guitar.
Here’s a close-up of the bridge on Summers’ historic Tele.
Photo courtesy of Ten-Guitars (https://ten-guitars.de)
In the neck position, there is a ’59 PAF humbucker with a conventional two-conductor wiring installed directly into the pickguard in the standard way, with the open pole pieces facing towards the neck. The choice of late-’50s PAF copies has never been better than it is today. You can buy excellent versions from a lot of companies, just make sure to choose the correct string spacing, which is usually called “F-spacing” or something similar, and is usually 2.070" (52.6 mm). (Gibson spacing, or G-spacing, is 1.930" or 49 mm.)
You’ll need humbucker routing on your body to make it fit. If you don’t have a body with humbucker routing and don’t want to get your Tele body re-routed, you can consider one of the numerous stacked humbuckers that will fit into a standard Telecaster neck pickup cavity. My experience is that there is a noticeable difference in tone compared to a full-sized humbucker, and it will be a compromise.
Next is the active booster. Finding a good booster module and wiring it up is much easier than fitting it into the tight space of a Telecaster body. There are a wide range of available booster options. There are complete DIY sets available that include the PCB and all of the necessary parts to build your own, and there are also drop-in PCBs that are already populated, like the well-known Fender mid-boost circuit kit. You can also find mini-sized booster modules using high-quality SMD parts, which only require a fraction of space compared to the regular PCBs.
“Finding a good booster module and wiring it up is much easier than fitting it into the tight space of a Telecaster body.”
The available options include treble boosters, mid-boost circuits, full-range boosters, etc. Choose what you like best. The problem will be that you need to stuff it into a Telecaster body. As you know, there is not much space inside a Telecaster, and you need to add the booster itself, the 9V battery, an additional pot for controlling the booster, and two additional mini-toggle switches—one for turning the booster on and off, and the other to get the bridge pickup out of phase. This is a lot of stuff! On Summers’ guitar, this problem was solved by adding a large cavity on the back and closing it with a plastic back plate, as on a Gibson Les Paul.
A look inside the cavity for the mid-boost unit.
Photo courtesy of TeleManDon from Vancouver Island, BC (https://tdpri.com)
You can clearly see the two big routings for the booster’s PCB and the 9V battery, plus the additional pot to control the amount of boost as well as the mini-toggle switch to turn the booster on and off. If you are not afraid of routing two big chambers into your Telecaster’s body, this is a suitable way to go.
On a Telecaster, there are not many alternatives I can think of to fit all these parts. One possible way of saving space would be to use a stacked pot with two 250k pots for volume and tone, so you have the second hole in the control plate available for the gain control pot of the booster. Between the two pots, it should be no problem to place the two mini-toggle switches. Or you use a push-pull pot for the gain control to save one of the mini-toggle switches. The guitar will look much cleaner, at least from the front side. But you still have to put the booster PCB and the battery somewhere. A customer of mine did this by completely routing the area under the pickguard. But even with only a regular single-coil neck pickup, it was a really tight fit, so with a regular-sized humbucker, it will be close to impossible. So, you or your luthier will have to be creative, and I wouldn’t be surprised if a company offers Andy Summers Telecaster bodies with all chambers already routed.
Here we go for the wiring. Wherever possible, I tried to keep the diagram as clean as possible. The wiring of the booster is only an example and depends on the booster you want to use, but the basic wiring is always the same.
Here’s a helpful schmatic of the Andy Summers‘ Telecaster wiring.
Illustration courtesy of SINGLECOIL (www.singlecoil.com)
That’s it. Next month, we will take a deep look into guitar cables and wires, what really makes a difference, and how you can use this to reshape your guitar tone. So stay tuned!
Until then ... keep on modding!
PG’sJohn Bohlinger caught up with Moak at his Nashville studio known affectionately as the Smoakstack.
Grammy-nominated session guitarist, producer, mixer, and engineer Paul Moak stays busy on multiple fronts. Over the years he’s written, played, produced and more for TV sessions (Pretty Little Liars, One Tree Hill) and artists including Third Day, Leeland, and the Blind Boys of Alabama. But most recently he’s worked with Heart and Ann Wilson and Tripsitter.
Time Traveler
Moak is most loyal to a 1963 Stratocaster body that’s mated to a 1980s-vintage, 3-bolt, maple, bullet-truss-rod, 1969-style Fender Japan neck. The bridge has been swapped as many as four times and the bridge and neck pickups are Lindy Fralins.
Cool Cat
If there’s one guitar Moak would grab in a fire, it’s the Jaguar he’s had since age 20 and used in his band DC Talk. When Moak bought the guitar at Music Go Round in Minneapolis, the olympic white finish was almost perfect. He remains impressed with the breadth of tones. He likes the low-output single-coils for use with more expansive reverb effects.
Mystery Message Les Paul
Moak’s 1970 L.P. Custom has a number of 1969 parts. It was traded to Moak by the band Feel. Interestingly, the back is carved with the words “cheat” and “liar,” telling a tale we can only speculate about.
Dad Rocker
Almost equally near and dear to Moak’s heart is this 1968 Vox Folk Twelve that belonged to his father. It has the original magnetic pickup at the neck as well as a piezo installed by Moak.
Flexi Plexis
This rare and precious trio of plexis can be routed in mix-and-match fashion to any of Moak’s extensive selection of cabs—all of which are miked and ready to roll.
Vintage Voices
Moak’s amps skew British, but ’60s Fender tone is here in plentitude courtesy of a blonde-and-oxblood Bassman and 1965 Bandmaster as well as a 2x6L6 Slivertone 1484 Twin Twelve.
Guess What?
The H-Zog, which is the second version of Canadian amp builder Garnet’s Herzog tube-driven overdrive, can work as an overdrive or an amp head, but it’s probably most famous for Randy Bachman’s fuzzy-as-heck “American Woman” tone.
Stomp Staff
While the Eventide H90 that helps anchor Moak’s pedalboard can handle the job of many pedals, he may have more amp heads on hand than stompboxes. But essentials include a JHS Pulp ‘N’ Peel compressor/preamp, a DigiTech Whammy II, DigiTech FreqOut natural feedback generator, a Pete Cornish SS-3 drive, Klon Centaur, and Electro-Harmonix Deluxe Memory Man.
PG Contributor Tom Butwin dives into three standout baritone guitars, each with its own approach to low-end power and playability. From PRS, Reverend, and Airline, these guitars offer different scale lengths, pickup configurations, and unique tonal options. Which one fits your style best? Watch and find out!