The interface features an onboard 12AX7 analog tube and 3-band tone control alongside Twonotes Torpedo power amp modeling and cab simulation.
Anaheim, CA (January 14, 2019) -- British audio company Audient has teamed up with leading cab simulation pioneers, twonotes audio engineering, to present Sono, the ultimate audio interface for guitarists.
Combining Audient's award-winning analogue and digital conversion recording technology with the world's best speaker-cab simulation from twonotes, Sono is home to the ultimate valve guitar preamp. Featuring an onboard 12AX7 analog tube and 3-band tone control alongside twonotes Torpedo power amp modeling and cab simulation, Sono provides countless tonal options for guitarists, whether they're recording, practising or gigging.
"With twonotes, the creative possibilities are endless and you can really start dialling in the tones your hear in your head," says marketing manager, Andy Allen. "Choose from a wide range of guitar and bass cab models based on classics such as the Marshall 4x12, Fender 2x12 or Ampeg Fridge, with more tones downloadable from Torpedo Remote if needed. You can even customise everything from the room type, microphone model and placement too, and once you're happy with your sound, you can store your favourite presets on board Sono and play them in standalone mode at any time - without the need for a computer."
With near zero latency, Sono doesn't get in the way of creativity. Monitor mix allows blending between the guitar input signal and DAW playback, ensuring delay-free recording, playback and monitoring, enabling the artist to stay in the creative zone with none of the latency problems you get when tracking with software.
In addition, Audient encourages Sono users to integrate their existing pedalboard. Andy explains, "Plug in your favourite distortion, reverb and delay pedals directly into Sono's D.I, dial up a tone and instantly start recording or jamming without the need to mic up and play through a noisy amp (or annoy your neighbours).
"However, if you do want to record in the more traditional sense, Sono will always record a clean D.I signal, so you can capture your performances as creativity strikes and reamp through your favourite hardware amps later without the need to buy a dedicated re-amp box," says Andy.
Guillaume Pille, twonotes owner, has been a fan of Audient for some time. "Audient interfaces have long been in our list of benchmark products used to try out our plugins and hardware units," he says. "Today, the whole twonotes team is very excited to present what we think is the perfect interface, not only for the guitarist and bassist, but also for any musician who wants to bring colour into his recordings."
Alongside the more guitar-centric features, Sono is a powerful interface in its own right, with two Audient console mic pres for studio quality recordings, expandability up to 10 inputs via ADAT for recording drums, class leading converters as well as the unique 'to valve' feature. "Try routing vocal microphones or synths through the classic valve preamp, analogue EQ and twonotes processing and start creating crazy new sounds or simply add that classic analogue warmth to your recordings," adds Andy.
"Sono is all about developing creativity and providing an easy-to-use gateway into the world of professional audio recording. It really is a fun tool for guitarists and engineers alike. With Sono anything is possible."
Sono is expected to ship in the first quarter of 2019 and will retail at USA MAP $449.
For more information:
Audient
Featuring Bluetooth input, XLR inputs, and advanced amplifier platform, the KC12 is designed to offer exceptional sound quality and versatility for a wide range of applications.
The KC12 is a first-of-its-kind, 3-way, 3000-watt active loudspeaker system encompassing the visual aesthetic of a column loudspeaker while surpassing the acoustic performance of conventional designs. Simple and easy to deploy, the elegant KC12, available in black and white, is ideal for a wide range of customers and applications from solo entertainers, musicians and bands, mobile entertainers and DJs to corporate AV, event production, and static installations.
Column-style portable loudspeaker systems are most often put into service due to their unobtrusive form factor. However, typical designs lack clarity and definition, particularly when pushed to high output levels, forcing the user into a form-over-function compromise. Solving this common dilemma, the KC12 cleverly utilizes a 3-way design featuring QSCās patented LEAFā¢ waveguide (first introduced in L Class Active Line Array Loudspeakers) combined with a true 1-inch compression driver, two 4-inch midrange drivers, and a high output 12-inch subwoofer, while still maintaining the desired, elegant appearance of a ācolumnā system. The KC12 produces an outstanding full-range horizontal coverage of 145 degrees and 35 degrees of audience-directed vertical coverage with clean and natural sound at all output levels.
The system features three inputs: a Bluetooth Ā® input combined with a 3.5 mm TRS stereo input, as well as two combo XLR inputs (Mic/Line/Hi-Z and Mic/Line/+48 V), with independent, assignableFactory Presets for each XLR input, making it ideal for small events where two microphones are needed for different uses. The rear panel incorporates a multi-function digital display, offering control and selection of several loudspeaker functions, including Global Parametric EQ, Subwoofer level, Presets and Scenes, Bluetooth configuration, Delay (maximum of 200 ms), or Reverb. Bluetooth functionality also provides True Wireless Stereo (TWS), which ensures low latency pairing between the music source and both left and right loudspeakers simultaneously.
Additionally, the KC12 can be deployed with or without its lower column pole, making the system ideally suited for utilization on a floor, riser or raised stage. The system is backed by a 6-year Extended Warranty (with product registration).
āThe KC12 exquisitely resolves the form-over-function compromise that has frustrated users of this category of products since they made their market introduction over 20 years ago,ā states David Fuller, VP of Product Development, QSC Audio. āWith the benefit of time, experience, extensive customer research, and cutting-edge innovation, our talented design team has truly created something very different from the status quo ā not simply a differentiated product, but an overall better solution for the customer.ā
The feature set and performance characteristics of the KC12 are complemented by a new, advanced amplifier platform, first incorporated into the L Class LS118 subwoofer released this past October. Fuller adds, āAmong the platformās key attributes are layers of real-time telemetry and protection to ensure uninterrupted performance day after day, which is a foundational QSC brand attribute.ā
āJust like our first K Series reset the bar for powered loudspeakers, elevating customersā expectations for performance, quality, reliability, usability, and professional appearance, the K Column offers a compelling, new approach to a familiar category and is destined to redefine the whole notion of what a ācolumnā is for users of portable PA products,ā states Ray van Straten, VPBrand, Marketing & amp; Training, QSC Audio. āThe product is simply stunning in its sleek and elegant appearance, but with the marketing tagline, āJust Listenā, weāre confident that once again, QSC sound quality will ultimately be the reason customers will quickly embrace the K Column as the next āNew Standardā in its category.ā
The QSC KC12 K Column carries a MAP price of $1,999.
For more information, please visit qsc.com.
This pedal is designed to offer both unique distortion qualities and a tonal palette of sonic possibilities.
At the heart of the Harvezi Hazze pedal is a waveshaper designed around a unijunction transistor - a relic from the early days of the semiconductor industry unearthed from the e-waste bins of flea markets in Tbilisi, Georgia, the Eastern European country's largest city.
The unijunction transistor offers unique properties allowing one simple component to replace a number of very complex devices. Therefore. depending on the operating mode, users can access a distortion, a limiter, a waveshaper and a generator - with smooth transitions among each of these.
The name "Harvezi Hazze" translates from Georgian as "a fault on the transmission line" or "signal jamming", and both the semantic and phonetic nature of these translations imply what users can expect: an impediment to the input signal, which can range from pleasant harmonic distortions to complete obliteration. The signal chain of Harvezi Hazze consists of an optical compressor with fixed parameters; a dual-mode distorting amplifier with either softer or harsher clipping; a waveshaper built around a unijunction transistor; and a tone stack section designed to tame these sonic building blocks.
Signal flow and controls
Following the input, the signal goes to the Compressor, Distorting Amplifier, Waveshaper, and then to the Tone Stack and output stages. Harvezi Hazze features six control knobs, a three-way switch and a footswitch.
- Gain Control: This controls the output amplitude of the signal in the distorting amplifier section. Depending on the position of the switch, the distortion introduced by this section is soft (with the switch in the left position) or more aggressive with an abundance of high harmonics (with the switch in the middle position).
- Spoil and Spread: This knob controls the operation of the unijunction transistor (waveshaper section). Spoil sets the point on the amplitude axis at which the wave will fold, and Spread sets the amplitude of the folding. The higher the Spread value, the more severe the distortion will be, while Spoil will change the timbre and response threshold. By adjusting Spoil, users can achieve various gating and cutoff effects; at low Spread values, distortion sounds are mixed into the clean sound.
- Tone: This knob adjusts the brightness of the sound. With higher values, higher harmonics become present in the signal.
- Three-way switch. This feature regulates either the distortion mode in the amplifier section (left and center positions), or turns on the total feedback mode (right position) when the values of all knobs begin to influence each other. In this position, effects occur such as resonance at certain frequencies and self-oscillation.
- Level knob: This controls the output volume of the signal.
- Footswitch: This routes the signal through the effect circuitry or from input to output directly (true bypass).
The array of switches on the side of the unit provides even further tonal options; the lower position of the switch enables the specific function:
- Tone Stack: Routes the signal through the tone stack section (Tone knob).
- Bass Boost: Enhances bass frequencies.
- Tone Mode: Changes the behavior of the Tone knob (tilt or lowpass).
- Notch Freq: Changes the central frequency of the filter.
- High Cut: Attenuates high frequencies.
- Compressor: Routes the signal through the compressor.
Harvezi Hazze is priced at ā¬290. To learn more, please visit https://somasynths.com/harvezi-hazze/.
Ibanez Blackout series acoustic guitars feature all-black aesthetic, high-quality electronics, and in-demand woods. Models include AEG721 with Fishman S-core pickups, AEWC621 with Ibanez AEQ-SP2 preamp, and TCY621 with Ibanez under-saddle pickup. With prices ranging from $249.99 to $399.99, these guitars offer a unique and stylish option for musicians.
Ibanez has unveiled its new Blackout series of acoustic guitars to their lineup. Inspired by the popular Iron Label series, these instruments feature an all-black aesthetic, including a matte black finish and black hardware. The Blackout series offers three distinct models: the AEG721 7-string acoustic-electric, the AEWC621, and the TCY621. Each model boasts in-demand woods, including a Spruce top, Sapele back and sides, and Macassar Ebony or Purpleheart for the fingerboard and bridge.
To complement their unique appearance, the Blackout guitars are equipped with high-quality electronics. The AEG721 and AEWC621 feature Fishmanās S-core pickups and Ibanez AEQ-SAP2 preamps, while the TCY621 utilizes an Ibanez under-saddle pickup and AEQ-2T preamp.
For more information, please visit ibanez.com.
AEG721
- AEG body
- 634mm/25" scale
- Spruce top
- Sapele back & sides
- Comfort Grip 3pc Nyatoh/Maple neck
- Macassar Ebony fretboard & bridge
- Black dyed Bone nut & saddle
- Black Die-cast tuners (18:1 gear ratio)
- FishmanĀ® S-core pickup
- Ibanez AEQ-SP2 preamp w/Onboard tuner
- Balanced XLR & 1/4" outputs
- Ibanez Advantageā¢ bridge pins
- D'AddarioĀ® XTAPB1253, plus .070 guage Phosphor Bronze
- String Gauge: .012/.016/.024/.032/.042/.053/.070
- Factory Tuning: 1E,2B,3G,4D,5A,6E,7B
- Recommended case: AEG10C/MAP: $169.99
- Finish: Blacked Out
LIST PRICE: $599.99
ESTIMATED STREET PRICE: $399.99
AEWC621
- AEWC body
- 634mm/25" scale
- Spruce top
- Sapele back & sides
- Comfort Grip Nyatoh neck
- Macassar Ebony fretboard & bridge
- Black Die-cast tuners (18:1 gear ratio)
- FishmanĀ® S-Core pickup
- Ibanez AEQ-SP2 preamp w/Onboard tuner
- Balanced XLR & 1/4" outputs
- Ibanez IACS6C coated strings
- Recommended case: AEG10C/MAP: $169.99
- Finish: Blacked Out
LIST PRICE: $599.99
ESTIMATED STREET PRICE: $399.99
TCY621
- Talman Double Cutaway body
- Neck joint at 16th fret
- Spruce top
- Sapele back & sides
- Okoume neck
- Purpleheart fretboard & bridge
- Black Die-cast tuners
- Ibanez Undersaddle pickup
- Ibanez AEQ-2T preamp w/Onboard tuner
- Ibanez Advantageā¢ bridge pins
- Recommended case: TM50C/MAP: $179.99
- Finish: Blacked Out
LIST PRICE: $374.99
ESTIMATED STREET PRICE: $249.99
Martin's 2025 NAMM Show lineup features new guitars with enhanced playability and vintage aesthetics.
C. F. Martin & Co. is unveiling an exciting lineup of new guitars ahead of The 2025 NAMM Show, including refinements to its trusted Standard Series and two all-new Retro Plus guitars.
With the Standard Series refresh, Martin brings fans enhanced playability, timeless aesthetics, and three stunning new models, while its two new Retro Plus guitars offer thermally aged spruce tops and the classic appearance of an 18-style guitar at an accessible price point. These releases showcase Martin's mission to create instruments that unleash the artist within.
These new guitars and more will be on display at The 2025 NAMM Show in Anaheim, California, through Saturday, January 25, with more releases to come.
Standard Series Refresh
Martin is refreshing its popular Standard Series lineup to bring subtle yet impactful refinements to enhance the look, tone, and playability of these iconic guitars, while introducing three new models to the series: the D-17, 000-17, and OM-45.
One of the key updates is Sitka spruce Golden Era (GE) top bracing, as featured on the Modern Deluxe Series, which offers a more vintage, breathy tone with enhanced sustain. The GE modified low oval neck profile maintains its popular shape but is optimized for vintage appeal with minimal increase in total mass.
It's paired with playability enhancements like a thinner fingerboard with a gently beveled comfort edge and refined string spacing at the nut, while the new GE modern belly bridge features smoother, more comfortable corners.
Standard Series guitars also now feature either bone or ebony bridge pins, along with newly added sunburst and ambertone finish options for select models. Additional aesthetic updates include a long diamond neck transition, a nut cut on angle, and a sleeker vintage-style heel.
These are the changes Martin enthusiasts have been asking for, delivering a blend of vintage appointments and modern playability enhancements. Players will notice improved comfort and vintage tones, particularly with the GE-inspired bracing and aesthetic refinements.
For more information, please visit martinguitar.com.
D-17
The Martin D-17 is a bold new offering in the refreshed Standard Series, combining vintage-inspired appointments with modern refinements for players seeking rich sounds and enhanced playability. Its iconic Dreadnought body shape is a favorite among players for its loud, projective tone and strong bass. This model is handcrafted with a satin-finished solid mahogany body, delivering a warm and woody tone, while vintage-inspired details such as a sleeker heel and nickel open gear tuners give the guitar a timeless, elegant look. With its satin-finished select hardwood neck and 25.4" scale length, whether youāre strumming big chords or picking intricate tunes, the D-17 delivers powerful, dynamic sound with a classic, vintage vibe.
000-17
The Martin 000-17 is another fresh addition to the Standard Series lineup. Its Auditorium (000) body shape offers a balanced tone and comfortable size, making it great for both fingerstyle playing and heavy-handed strumming. Crafted from solid mahogany with a satin finish, it delivers a warm, woody tone with a clear top end and a punchy midrangeāideal for players seeking a vintage-inspired sound with a modern edge. Its satin-finished select hardwood neck and 24.9" scale length contributes to a more relaxed string feel and warmer, mellower tones. Whether youāre playing at home, in the studio, or on stage, the 000-17 delivers the balanced, dynamic sound that players expect from a high-quality Martin.
OM-45
The Martin OM-45 is a pinnacle of craftsmanship in the refreshed Standard Series, combining classic appointments with modern enhancements for a truly exceptional instrument. This all-new full-gloss acoustic is crafted with solid East Indian rosewood back and sides and a solid spruce top, delivering a rich, resonant tone with remarkable sustain. Its genuine mahogany neck ensures a smooth, effortless feel, while the longer 25.4" scale length provides just the right amount of string tension for enhanced clarity, making this guitar great for intricate picking and strumming. Its dazzling pearl inlay, aging toner, and gold open gear tuners offer an elegant touch, making the OM-45 as stunning to look at as it is to play.
De Retro PlusĀ Mahogany
The Martin DE Retro Plus Mahogany is inspired by Martinās legendary 18-style flagship models. It combines powerful tone and iconic design with cutting-edge craftsmanship at a fraction of the price. Its torrefied solid spruce top is thermally aged for enhanced resonance and a beautifully seasoned sound, delivering the rich, broken-in tone of a vintage instrument from the first strum. Itās the same premium feature long reserved for our Authentic and Modern Deluxe series, now available for the first time ever in the Road Series. It even comes stage-ready with Martin E1 electronics, featuring a built-in tuner and controls for dialing in your perfect live tone.
000E Retro PlusĀ Mahogany
This 000 model blends balanced tone with the same cutting-edge craftsmanship and 18-style appearance as its Dreadnought counterpart, including a torrefied solid spruce top. With solid mahogany back and sides, scalloped spruce X bracing, a Performing Artist neck, ebony fingerboard and bridge, and Martin E1 electronics, these guitars have everything you could want in an acoustic. Ideal as a gigging workhorse or your first step into premium acoustics, they deliver best-in-class quality at an unbeatable value for serious players, and a lifetime of inspiration for anyone who picks one up. Just be warned, you wonāt be able to put them downābecause nothing compares to a Martin.