The company takes the TS beyond simple screaming.

 
Gibson Les Paul, bridge pickup, into a JTM45-style amp set for light crunch.
0:00 – Pedal off.
0:06 – Pedal on, Gain Mode #1 (symmetrical LED clipping), Level 45%, Gain 50%, Tone 50%
0:26 – Gain Mode #3 (asymmetrical diode clipping), Level 45%, Gain 50%, Tone 50%
0:45 – Gain Mode #2 (opamp boost), Level 45%, Gain 50%, Tone 50%
1:04 – Back to Gain Mode #1, but Gain knob maxed.
 

Ratings

Pros:
A great sounding, versatile TS-style pedal with excellent clarity, good headroom, and plenty of grind when you need it.

Cons:
Drastic level changes when you move between clipping modes.

Street:
$99

EarthQuaker Devices Plumes
earthquakerdevices.com



Tones:


Ease of Use:


Build/Design:


Value:
 

Though they’ve long avoided jumping on the crowded Tube Screamer-clone bandwagon, EarthQuaker Devices has finally issued its own contestant in the TS wars. We’re not surprised, however, to discover that this creative Akron, Ohio, pedalmaker is doing the TS thing very differently.

Green Meanie
EarthQuaker Devices calls the Plumes pedal a “small signal shredder,” which we’ll guess means “low- to medium-gain overdrive.” The interface is gloriously simple, with controls for gain, tone, and level plus a 3-way clipping mode switch. These govern a cleverly conceived circuit that honors EQD founder Jamie Stillman’s vow to never produce “just another Tube Screamer.”

The circuit is op-amp based in classic TS style. And you hear a lot of headroom and clarity right off the bat. But the Plumes also delivers—courtesy of the 3-way mini-toggle—a choice of symmetrical LED clipping, no clipping (op-amp-driven boost only), or asymmetrical diode clipping. Combined with the extended range of the other controls and a tone knob that delivers “more bass to the left, more middles in the middle, and more treble to the right,” as EQD puts it, there are a lot of sounds to explore.

The die-cast metal box is a standard 4 3/4"x 2½"x1½", with top-mounted input, output, and center-negative DC jacks. The Flexi-Switching footswitch is nifty too: tap once for standard latching switching to activate the effect, tap again to turn it off; or, press and hold for momentary activation, then release to bypass it.

The Plumes exhibits more clarity and articulation than the typical Screamer.

Three Ways to Clip (or Not)
I tested the Plumes with a Gibson 1958 Les Paul Reissue and a Fender Telecaster into a Friedman Small Box head and 2x12 cab, and a tweed Deluxe-style 1x12 combo. My main take-away was that while there’s plenty of TS-like character here, this personality-rich pedal is unique enough to be categorized outside the TS family. For some players, it might even warrant a place alongside a favorite Screamer-style overdrive and used for contrasting dirt tones.

The Plumes exhibits more clarity and articulation than the typical Screamer, with enhanced string-to-string separation in dirty settings and none of the “TS haze” that many similar pedals slather over your basic tone. The midrange is slightly pronounced, which is typical of a TS-style pedal, though not distractingly so. Both low-end and high-end content are distinct and impressive. Of the three gain settings, I enjoyed the symmetrical LED clipping most—mostly for its aggressive, Marshall-y grind when you wind the gain up past noon. But all three are useful and sound great in the right application, which, to my ears, is rowdy rock ‘n’ roll.

It’s worth noting that switching between the three clipping modes isn’t always viable if you're mid gig, because each clipping mode results in a very different output level. (No clipping is especially loud.) So flipping the switch usually means at least adjusting the master output control, too. But those differences also effectively make Plumes three-pedals-in-one, and that’s a significant bonus.

The Verdict
The Plumes is a standout in the crowded TS-style overdrive market. And although it does many of the things you expect of a Tube Screamer very well, it produces many unique tones, too—all while coming in at a very impressive price.

Watch the First Look:


A bone nut being back-filed for proper string placement and correct action height.

It doesn’t have to cost a lot to change your acoustic guitar’s tone and playability.

In my early days, all the guitars I played (which all happened to be pre-1950s) used bone nuts and saddles. I took this for granted, and so did my musician friends. With the exception of the ebony nuts on some turn-of-the-century parlors and the occasional use of ivory, the use of bone was a simple fact of our guitar playing lives, and alternative materials were simply uncommon to us.

Read More Show less

While Monolord has no shortage of the dark and heavy, guitarist and vocalist Thomas V Jäger comes at it from a perspective more common to pop songsmiths.

Photo by Chad Kelco

Melodies, hooks, clean tones, and no guitar solos. Are we sure this Elliott Smith fan fronts a doom-metal band? (We’re sure!)

Legend has it the name Monolord refers to a friend of the band with the same moniker who lost hearing in his left ear, and later said it didn’t matter if the band recorded anything in stereo, because he could not hear it anyway. It’s a funny, though slightly tragic, bit of backstory, but that handle is befitting in yet another, perhaps even more profound, way. Doom and stoner metal are arguably the torch-bearing subgenres for hard rock guitar players, and if any band seems to hold the keys to the castle at this moment, it’s Monolord.

Read More Show less
x