Gibson’s archives give up lost treasure.
Delicious smooth-to-silky P-90 sounds. Awesome chunky neck. Pretty, unusual-for-Gibson body profile.
Holy cow, it’s expensive.
$4,999
Gibson Theodore
gibson.com
Gibson has had a lot of time to evolve as a guitar company. But that doesn’t make the breadth of personalities among their instruments any less astonishing. A Firebird, an ES-150, an ES-330, a Les Paul Standard, and an SG Jr. can each inspire very different paths for a given musical idea—or different ideas altogether. Each has its own musicality, attitude, and energy.
So, while it may not look the part at first, the Gibson Theodore, which existed only as a sketch by Ted McCarty from March 1957, is a perfect—or perfectly oddball—fit for the Gibson family. Slim, slender, scimitar-headstocked, and built around a pair of very lively P-90s, Theodore looks and feels like it longs to rock first and foremost. But it also has more feline and economical lines than many of its Gibson brethren. And like a goldtop or SG Special, the Theodore dwells just as happily in smoky jazz settings and mellow, meandering chord melody zones as rocking domains. This blend of attributes and capabilities make Theodore very versatile. It’s also an intriguing peek at the many design directions Ted McCarty was considering for Gibson while at a zenith of his creativity.
Tulip Mania
Striking as Theodore looks, it wasn’t the only guitar at the time to embrace a tulip-shaped double-cutaway design. And one has to wonder if Gibson didn’t reconsider Theodore as a production instrument upon seeing Rickenbacker’s similarly tulip-shaped Model 400 from the previous year. McCarty’s tulip shape is slimmer and more uniform than Rickenbacker’s. But while Theodore might estrange Gibson fans that prefer the company’s more overtly muscular shapes, there’s still much of the adventure and daring that went into the Explorer and Flying V at work here. And though Theodore didn’t fit the future-forward ethos of the Explorer and V, the way it spans 1930s Deco and the fancy organic shapes of Ibanez, Alembic, and Doug Irwin guitars from the ’70s make it a fascinating mash up of 20th century design modes.
There are practical upsides to the configuration as well. The body is alder, just as McCarty’s original sketch called for (it also has a walnut center strip that is implied in the sketch but not listed as a manufacturing specification). Alder construction makes Theodore lighter than a mahogany Melody Maker or SG. And though McCarty’s sketch specified that the body should be flat, it also includes a cross-section diagram of the lower bout that calls for a comfortable contour where guitar and ribs meet, suggesting that the Stratocaster’s ergonomic refinements had put guitar builders on notice. So, though the Theodore isn’t as form-fitting as a Stratocaster, it sits more comfortably against the human body than many slab-bodies guitars of the period.
Hooked up to two old black-panel Fenders, the bridge pickup made as perfect a rock ’n’ roll growl as I could imagine.
Chunky Style, All Butter
The Theodore’s neck is a 2-piece mahogany slab cut in what Gibson calls a chunky C-profile. It’s a fistful, but it’s awesome. And what it may sacrifice in slim-and-shreddy slinkiness it makes up for with inviting, lean-into-it heft that compels you to linger on single notes and extract every microtone, vibrato nuance, and bit of sustain. That approach is rewarded to no end by the excellent P-90s, which are bold, loud, and relatively noise free. Hooked up to two old black-panel Fenders, the bridge pickup made as perfect a rock ’n’ roll growl as I could imagine.
Rocking tones aside, players should not hesitate to use these P-90s at lower volume. Cutting the guitar volume back by just a few notches here and there yields some of the most soulful and dynamic sounds from the guitar. These tones excel for mellower lead passages, jangle rhythms, and jazzy chord ballads. Even at these slightly attenuated volumes the top end output remains very alive and energetic, and you can easily coax excited, just-dirty sounds from your amplifier if you add intensity to your pick attack.
The Verdict
The Theodore is a beautiful playing machine. The P-90s are delicious on the rocking and mellow sides of the spectrum, and they are sensitive—responding in cool ways to picking dynamics when wide open and at cleaner, lower volumes. The substantial neck is fantastic. And though the body profile will doubtless elicit strong opinions, I really warmed to the shape for its elegant economy of line. The short horn on the lap side may make it a less-than-ideal instrument for extended seated sessions as the short horn can slip off your lap in certain positions. But hanging on a strap it feels light, sturdy, responsive, and ready to do damage.
As for the cost: Well, five grand is a lot—a lot—for a guitar that, technically, is short on bells and whistles. On the other hand, the Theodore is immaculately built and sounds heavenly. Given its low production numbers and niche appeal, Theodore is almost certainly bound to be a very rare bird. Hold on to it for a while and you may be repaid with much more than hours of sweet tones and praise from fans of eccentric electrics.
Gibson Theodore Demo | First Look
Ted McCarty's archives reveal a long-lost treasure.More First Look videos: https://bit.ly/FIrstLookSubscribe to PG's Channel: https://bit.ly/SubscribePGYouTube...- Gibson SG Modern Review - Premier Guitar ›
- The Mysterious Gibson Moderne - Premier Guitar ›
- Gibson G-00 and G-200 Review - Premier Guitar ›
- Gibson Falcon 5 and 20 Amp Review ›
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beauty–both in sound and appearance–of the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.
Introducing the Gibson Acoustic Specials – J-45, Hummingbird & L-00 Special - YouTube
Great Eastern FX Co. has released the limited-edition OC201 Preamp, featuring vintage Mullard OC201 transistors for a unique fuzz sound. Part of the 'Obsolete Devices' series, this pedal combines classic circuits with modern components for optimal tone and reliability.
Boutique British pedal designers GreatEastern FX Co. have released a new pedal. Limited to just 50 units, the OC201 Preamp is an intriguing twist on the familiar two-transistor fuzz circuit, built around a pair of new-old-stock Mullard OC201 transistors.
“The OC201 is a very early silicon transistor,” company founder David Greeves explains. “It was actually the first silicon transistor made by Mullard, using the same method as their germanium devices. It’s pretty crude by modern standards, with very low gain and limited bandwidth, but that’s exactly what makes it so great in a fuzz pedal.”
This little-known low-gain silicon transistor is responsible for the OC201 Preamp’s palette of sounds, which GreatEastern FX say ranges from dirty boost and garage rock drive sounds up to a raw and richly textured fuzz, all with the excellent volume knob clean-up characteristics this style of fuzz is famous for. The circuit has also been tweaked to deliver a healthy kick of volume to your amp.
This limited-edition pedal is the first in a new series that Great Eastern FX are calling ‘Obsolete Devices’. According to the company, the Obsolete Devices series will feature the company’s take on a range of classic circuits, constructed using a mixture of vintage and modern components. It’s a distinct departure from Great Eastern FX’s main range of pedals.
“With pedals like the Design-a-drive and the XO Variable Crossover, we’re really committed to developing original designs that bring something new to the table,” founder David Greeves explains. “I’m always very conscious of choosing parts that aren’t going to go obsolete so we can go on making the pedals for as long as people want to buy them. But I also love messing around with old parts and classic circuits, which is a totally different mentality. The Obsolete Devices series is basically a way for me to have fun modifying these classic circuits and experimenting with my stash of NOS components, then share the results.
“The name is a little bit of an inside joke,” he continues. “I think what gets labelled as ‘obsolete’ is very subjective. As pedal designers and guitar players, we obsess over obsolete components and what, in any other field, would be considered outdated designs. So the name is a nod to that. I also loved the thought of us coming out with some brand-new Obsolete Devices of our own!”
Alongside the pedal’s new-old-stock Mullard OC201 transistors – which are the reason only 50 of them are being made – the OC201 Preamp uses quality modern components, including high-tolerance Dale metal film resistors and WIMA capacitors. GreatEastern FX say that this hybrid approach, using vintage parts where they make the most difference sonically and low-noise modern parts elsewhere, will deliver the best combination of tone and reliability while also keeping the price from spiralling out of control.
The OC201 Preamp will cost £249 in the UK, $299 in the US and €299 in the EU. It’s available now direct from Great Eastern FX Co. and from the following dealers:
- UK – Andertons
- Europe – Pedaltown.nl
- USA – Sound Shoppe NYC
- Canada – Electric Mojo Guitars
For more information, please visit greateasternfx.com.
Obsolete Devices OC201 Preamp | Great Eastern FX Co. - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.PRS Guitars celebrates 40 years with the Limited Edition 40th Anniversary Custom 24-08 Semi-Hollow.
This limited-edition instrument also features a “10-top” grade figured maple top, semi-hollow body, ziricote fretboard and headstock veneer, and special inlay package. Only 300 of this special release will be available worldwide, each including a certificate hand-signed by Paul Reed Smith.
“The Custom 24 is one of the first two guitars I made to launch the company and has been our flagship design,” said PRS Guitars Founder & Managing General Partner, Paul Reed Smith. “Updating the 24-08 version for our 40th Anniversary with a semi-hollow body, EQ mini toggles, and this wood combination really allow the instrument to ‘sing’ in a full, beautiful voice of its own.”
Now made with American alnico and updated build specs, TCI pickups are designed to offer a full, musical sound reminiscent of single-coil and soapbar tones without the hum.
The dual EQ mini-toggle switches were originally developed in PRS’s Private Stock department and act as tuned high-pass filters when engaged (in the up position), removing shelved low-end and allowing the high frequencies through for more clarity and musical highs.
For more information, please visit prsguitars.com.
40th Anniversary Custom 24-08 Semi-Hollow Limited Edition | Demo | PRS Guitars - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Geppetto Guitars introduces The Atomic Punk humbucker pickup set, handcrafted with high wind bridge and low wind neck pickups for superior tone. Featuring AlNiCo magnets and customizable covers, this set, developed for gigging pro Jason Soules, offers versatility and quality craftsmanship.
Geppetto Guitars has introduced its newest humbucker pickup set, The Atomic Punk. Featuring a high wind bridge and a low wind neck pickup, each pickup reflects Geppetto’s well-established ethos: made by hand, one at a time, with an emphasis on workmanship and superior tone.
The Atomic Punk bridge pickup features an AlNiCo 8 magnet and the neck is built with an AlNiCo 3 magnet, with wax potting available upon request. Atomic Punk pickup sets are available with polished nickel, raw nickel or aged nickel covers, as well as uncovered.
Geppetto Guitars owner Mike O'Donoghue developed the Atomic Punk at the behest of longtime customer and friend Jason Soules, a gigging pro who currently writes and plays guitar with the bands The Problem Eels (from Nashville TN) and Crimson Devils (Austin TX).
“I built it to Jason’s exact request,” says O’Donoghue, “and this set absolutely has the best characteristics in the bridge, neck, and middle positions. It really covers a multitude of voices as well as tones.”
The Atomic Punk bridge pickup’s DC resistance is approximately 13.5k and features an Alnico 8magnet. The Atomic Punk neck pickup DCR is 6.75k and features an Alnico 3 magnet.
Both pickups come with two-conductor wiring as standard configuration, although the AtomicPunk bridge pickup is available with optional four-conductor wiring.
The Atomic Punk pickup set carries a street price of $250 (including your choice of covers) and is directly from Geppetto Guitars via telephone at 512-630-8423, online at geppettoguitars.com as well as Austin Vintage Guitars, Austin TX.
For more information, please visit geppettoguitars.com.