PRS Pedal Reviews: Horsemeat Transparent Overdrive, Mary Cries Optical Compressor, and Wind Through the Trees Dual Analog Flanger
Paul Reed Smith may hate pedals, but his first foray into the realm delivers nothing but gems.
Inside each box containing a brand new PRS pedal, there’s a little fold-out card with a picture of Paul Reed Smith and a simple caption: “I hate pedals.” It’s not hard to imagine Smith’s indifference to stompboxes. PRS guitars are immaculately executed, ultra-playable instruments that reflect a focus on elemental interactions between fingers, strings, and fretboard. Indeed, for much of Paul Reed Smith’s career, stompboxes were probably held in the same regard as a broken toaster—a needless impediment to the communication of unadulterated tone.
Certainly, there is a visceral thrill to playing a guitar without effects—particularly one as nice as the average PRS. But while that’s true, stompboxes are, to many musicians, equally artful and thrilling vehicles of expression. And more than a few pedals have done their magic with a PRS guitar at the other end of a cable.
PRS’ three debut pedals—an optical compressor, overdrive, and dual flanger—do not feel like willy-nilly concessions to market pressures. In fact, in keeping with PRS tradition and ethos, these pedals seem selected and designed to offer minimal intrusion on the guitar/amp relationship if the player chooses that route. But they also have the bandwidth to be bold and even positively extroverted. Unsurprisingly, they are also built to a very high standard of quality and reflect an intense attention to detail.
PRS Horsemeat, Mary Cries & Wind Through the Trees Demos | First Look
Horsemeat Transparent Overdrive
Horsemeat isn’t a pretty name, but I’m guessing it alludes to making short work—mincemeat, if you will—of the Klon Centaur in a head-to-head battle. It’s hard to know exactly how much inspiration PRS derived from the Klon. PRS emphatically insists that Horsemeat is a very original design. And its circuit board is flipped, making it impossible to determine similarities in topology. It shares at least one important design element with the Klon, in the form of germanium clipping diodes. In a very general sense, germanium diodes tend to contribute soft-edged compression and a high capacity for distortion. But without knowing how other components in the circuit modify the performance of the diodes, you have to rely on your ears. And alongside my favorite Klon clone, Horsemeat sounds like a very different animal indeed.
Next to the Klon clone—which serves here as a familiar baseline rather than a direct comparison—the Horsemeat’s headroom and the leeway to work with it via picking dynamics or the flexible and practical control array is striking.
Though the Horsemeat can get aggressive, moving through the gain control’s range yields many nuanced shades. At maximum gain levels (and with relatively neutral treble, bass, and voice settings), the Horsemeat exhibits a lot of Marshall-plexi-like characteristics. There’s a distinct sense of size, a viscerally satisfying growl to the voice, and lots of top-end response that gives first- and second-string output heat and room to breathe. If you keep the output level at a reasonable setting, the compression in the distortion never feels oppressive or muddy. Instead, the pedal’s natural compression tends to lend cohesion. And even at advanced output level settings (and there is a lot of room to run in that respect), the distortion remains articulate.
“Moving through the gain control’s range really yielded shades of gain rather than heaps of extra crunch and aggression.”
Reducing gain reveals an impressive capacity for touch sensitivity. I can’t remember the last gain device I used that responded so well to variations in fingerpicking intensity. Guitar volume attenuation, too, yields rich and very pretty clean tones. And if you’re frustrated by your single-coil pickup’s tendency to bleed high end with volume reduction, you’ll be tickled by how readily the Horsemeat can replace some of that sparkle.
The bass and treble controls not only have a lot of range, but offer very colorful and varied tones within those areas. You can extract exceptionally bright tones out of the Horsemeat (in fact, extra-trebly settings rather than high-gain sounds struck me as the pedal’s most “extreme” settings). The voice control, which shapes frequency response in the clipping stage, helps you color the pedal’s tones in even more specific ways. Aggressively clockwise settings sound and feel hot and explosive, while the lower-to-middle third of its range have a sweetness that works with the pedal’s intrinsic dynamism to add soulful movement to chord melodies.
The Verdict
It’s hard to imagine an overdrive user that wouldn’t dig working with the Horsemeat. Players that prefer the squish in overdriven Fender tweed circuits might find the output a touch too even across frequencies. But I suspect a lot of players that love the more articulate side of a Marshall’s voice or really obsess over relative transparency will find a soulmate in this fine and varied drive machine.
Mary Cries Optical Compressor
Like the Horsemeat, the Mary Cries comp hints at a possible PRS design team directive: That a guitar’s fundamental voice should always be able to be its best, most exciting self. That’s no surprise for a company whose instruments are typically so rich and sonorous. But like the Universal Audio Teletronix LA-2A optical studio compressor that inspired it, the Mary Cries succeeds so well that it could probably make a busted kazoo shine.
“The Mary Cries could probably make a busted kazoo shine.”
If you ever use a real LA-2A in a studio, you’ll never forget the way it fattens, flatters, and warms a signal. You’ll also be struck by how economical the layout is. Apart from a compression ratio switch, there’s a peak reduction knob (typically just called the compression control) and a make-up gain or output gain control. Even a novice can competently use an LA-2A using ears and intuition.
Building a pedal-sized optical compressor circuit does not automatically make it the equivalent of an LA-2A. That verges on the impossible. But the Mary Cries excels at the same tasks: adding body and excitement to a signal and enabling quick adjustments without overthinking the process. The Mary Cries reduces the control scheme of an LA-2A to just the compression and output gain controls (which are the controls studio engineers use most). But just as a studio LA-2A can dramatically recast a sound with these simple interactions, the Mary Cries has the capacity to completely alter the feel and force of an instrument—beyond adding sustain and mitigating the effects of nasty peaks.
Even modest compression settings on the Mary Cries also have the effect of thickening and tightening low- and low-mid frequencies, giving the perception of extra mass and resonance without overpowering the top end. Mary Cries also colors trebles with bell-like sustain that tends to decay in almost perfect balance with the fatter low end. Players often use comps to achieve balance between frequency band extremes, but the Mary Cries’ cohesiveness, if you’ll permit a food analogy, has the feel of a sauce where every ingredient shines brilliantly.
This ability to gather and highlight fundamentals and overtones in a balanced whole does wonders for simple and extended chords. And these tone composites can purr and growl gorgeously depending on where you situate your output gain. Incidentally, Mary Cries is a magnificent clean boost when you kick up the output gain and reduce the compression to a minimum.
The Verdict
Mary Cries does a superb job of sounding and feeling transformative with very little fuss. It’s beautifully built, which manifests itself in the unit’s exceptionally quiet performance. At 219 bucks, it may seem expensive to players accustomed to other superficially simple comps. But I suspect even a cursory side-by-side play with many of these units would reveal much about Mary Cries’ nuance, elegance, and value.
Wind Through the Trees Dual Analog Flanger
Compared to its relatively streamlined siblings the Mary Cries and the Horsemeat, the analog, LFO-driven Wind Through the Trees flanger looks like a handful to manage. But for all the knobs that populate the Wind’s enclosure, it’s surprisingly intuitive.
Many contemporary, digitally attuned players will insist that a pedal this full of possibilities should come with presets. But the Wind Through the Trees’ analog interface is fluid and clear enough that you can move between varied settings with relative ease. That makes exploring the pedal’s myriad textures a flat-out joy—particularly because you can home in on very specific modulation profiles to suit a musical moment.
“One of the Wind Through the Trees greatest strengths is its ability to generate very mellow and hauntingly subliminal modulations.”
Flange is not an effect players typically associate with subtlety. But one of the Wind Through the Trees’ greatest strengths is its ability to generate very mellow and hauntingly subliminal modulations. These subtleties are made possible by the Wind Through the Trees very interactive, sensitive, and rangy controls. And, in my experience at least, the LFO mix, wet/dry output, and the very clearly labeled “added highs” controls are key to these textures.
Using these controls, you can, for instance, fashion a very understated modulation on LFO 1, blend in just a touch of twitchy, deep, high-rate modulation from LFO 2, add a touch of haze or brightness to taste with the added highs control, and then mix the sum into your signal with the very sensitive dry/wet knob. These are obviously not revolutionary means of control, but the way they work on the Wind Through the Trees feels surgical and gives you a real sense of command where some flangers feel monochromatic or purely chaotic.
But if chaos—or at least the surreal—is what you crave, the Wind Through the trees can deliver. For instance, very effective, weird-but-musical textures can be crafted by dialing closely adjacent but just offset rate and depth settings in the two LFOs, then setting their respective manual (or waveform delay) controls in opposition and cranking the regen to extra whooshy levels. Using the same scheme but mixing slow and fast rate settings in the two LFOs yields even stranger and more complex variations that combine hints of rotary speaker and ring modulation. And backgrounding these wild combinations by subtracting high end and using a dryer mix adds mysterious animation to chords and melody lines.
The Verdict
At about 350 bucks, the Wind Through the Trees is the most expensive of the new PRS pedals. And it’s understandable that some might perceive that price as high for an effect that’s, ostensibly, specialized. But the Wind Through the Trees proves how expansive a flanger can be when done right. There are lovely chorus-like sounds, plenty of intense vintage phase tones, and the deep but elegant and intuitive control set makes crafting complex modulations feel effortlessly creative.
Players accustomed to presets on a pedal with such broad capabilities may be bummed by their absence. And it’s true that moving between vastly different flange settings in the midst of a performance won’t always be a piece of cake. But in the context of song creation and in the studio, where you have the luxury of hunting for the perfect modulation color, Wind Through The Trees can be a potent musical companion.
- First Look: PRS SE Silver Sky John Mayer - Premier Guitar ›
- Factory Tour: PRS Guitars - Premier Guitar ›
- When Exactly Did "Boutique Pedals" Become a Thing? - Premier ... ›
- Messiah Guitars Introduces Dandelion Fuzz & Quiggly Octofuzz - Premier Guitar ›
- Paul Reed Smith Ends the Tonewood Debate - Premier Guitar ›
- PG Explained: Guitar Pedals/Effects - Premier Guitar ›
We chat with Molly about Sister Rosetta’s “immediately impressive” playing, which blends jazz, gospel, chromaticism, and blues into an early rock ‘n’ roll style that was not only way ahead of its time but was also truly rockin’.
In the early ’60s, some of the British guitarists who would shape the direction of our instrument for decades to come all found themselves at a concert by Sister Rosetta Tharpe. What they heard from Tharpe and what made her performances so special—her sound, her energy—must have resonated. Back at home in the U.S., she was a captivating presence, wowing audiences going back to her early days in church through performing the first stadium rock ‘n’ roll concert—which was also one of her weddings—and beyond. Her guitar playing was incendiary, energetic, and a force to be reckoned with.
On this episode of 100 Guitarists, we’re joined by guitarist Molly Miller, who in addition to being a fantastic guitarist, educator, bandleader, and performing with Jason Mraz, is a bit of a Sister Rosetta scholar. We chat with Molly about Sister Rosetta’s “immediately impressive” playing, which blends jazz, gospel, chromaticism, and blues into an early rock ‘n’ roll style that was not only way ahead of its time but was also truly rockin’.
Featuring the SansAmp section, Reverb/Delay/Roto effects, and OMG overdrive, with new additions like a switchable Pre/Post Boost and Effect Loop. Pre-configured for the RK Killer Wail wah, this pedal offers versatile tones and unmatched flexibility.
Since the debut of the original RK5 in 2014, Richie’s needs have changed, both on and off the road. The RK5 v3 retains the same SansAmp section, Reverb/Delay/Roto section, and Richie’sSignature OMG overdrive. New features include a switchable Pre/Post Boost to beef up drive and distortion or increase the overall volume to punch up fills and solos, along with the addition of an Effect Loop. It has also been pre-configured to provide phantom power for Richie’s Tech21 Signature RK Killer Wail wah.
The all-analog SansAmp section of the RK5 focuses on clean tones within the tube amplifier sound spectrum. It includes 3-band active EQ, and Level and Drive controls. To dirty things up, you have the flexibility of using the Drive control, and the Boost function, or you can add overdrive from the OMG section. Or all three. Each method achieves different tones. The OMG section is based upon the Richie Kotzen Signature OMG pedal, which provides a wide range of overdrive, from clean to aggressive. You can add personality to a clean amp or use it for extra punch with a dirty amp tone. Controls include Drive for the overall amount of gain and overdrive and Tone with specialized voicing for adjusting the high-end and mid-range. A Fuzz switch changes the character and attack of the overdrive to a fuzz-style tone, making it thicker and woolier.
Other features include an independent foot-switchable Reverb witha choice of large and small“room sizes;” Tap Tempo Delay, which can be transformed into a rotating speaker effect; included Tech 21 Model #DC9 universal self-adjusting 9V DC power supply, with interchangeable international prong assemblies for use anywhere in the world. Anticipated availability: January 2025
For more information, please visit tech21nyc.com.
OM-balance and comfort suited for the fingerstylist on a budget.
Comfortably, agreeably playable. Balanced dimensions. Nice fretwork.
Lighter mahogany top looks less classically mahogany-like. Some compressed sounds in heavy-strumming settings.
$299
Guild OM-320
guildguitars.com
The Premier Guitar crew is spoiled when it comes to hanging out with nice flattops. But while those too-brief encounters with acoustics we can’t afford teach us a lot about the flattop at its most refined, they also underscore a disconnect between the cost and the acoustic guitar’s status as a true folk instrument of the people.
Guild’s OM-320, from the company’s new 300 series, sells for $299, which isn’t much more than a good-quality, entry-level flattop cost in the 1980s. Strikingly, there’s a lot of competition in this price class. Even so, the OM-320’s nice build quality and pretty tone in fingerpicking applications stand out in a very crowded price segment.
The United Guild of Deal-Seeking Pickers
Though Guild, in all its incarnations, has always made accessible guitars a part of their offerings, a $300 instrument with the company’s logo might give pause to players familiar with guitars from their various U.S. factories. Quality can be hit-or-miss on any guitar from any brand at the entry level. What’s more, a lot of guitars with different brand names come from just a few OEM facilities—lending a certain sameness on top of irregular quality. But the recent acquisition of Guild by Yamaha, who has a reputation for solid entry-level instruments, inspires confidence as far as these concerns go.
So, too, does the integrity of the OM-320 at the nuts-and-bolts level. I couldn’t find any overt lapses in quality control. And in many spots where that really counts, like the fretwork, the execution is especially good. Little details like the Guild logo overlay (rather than a simple decal) add a soupçon of luxury. So do the Guild-branded, Grover Sta-Tite-style butterbean tuners, which look stylish and feel sensitive and accurate.
“The neck inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue.”
Though the body is built from layered mahogany on the back and sides and a solid mahogany top, the latter is much lighter and amber- or honey-toned than the rich cocoa-hued mahogany tops you’d associate with a vintage Guild M-20, or, for that matter, theM-120 from the company’s contemporary Westerly line. As a result, you see a little more contrast in the grain and a little dimpling in certain sections of the wood. The lighter wood isn’t unattractive, it just looks less trad, if you’re chasing Nick Drake’s Bryter Layter style. If that’s important, you should adjust the “design/build” score appropriately.
Sit and Stay Awhile
Barring being covered in porcupine spines, almost any OM or 000 will qualify as a pure-comfort title finalist. It’s not too thick, too wide, nor too petite—a size and profile that also pays unique, civilized sonic dividends. Here, the OM body is complimented by a neck that feels like an especially natural match. I don’t have a bunch of inexpensive OMs on hand to compare, and there isn’t anything wildly unique about the shape, but the neck profile feels very proportionate to the body. It also, depending on your own sense of such things, inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue. The neck is not classically OM-like in terms of nut width. The M-320’s nut measures 1 13/16", which is typical of a 000, rather than the 1 3/4" associated with OMs. The extra width, of course, would make the guitar more appealing to some fingerstylists that need the space. At no point, however, did I feel anything close to cramped; it’s just very comfortable.
The combination of layered back and sides, OM/000 dimensions, and mahogany mean the OM-320 feels and sounds less than super-widescreen in terms of tone spectrum and power. Nevertheless, it sounds balanced and pretty—particularly with a droning, dropped 6th string and other more-elastic tunings where the guitar can exercise the lower extremes of its voice. Tuning to standard has the effect of highlighting midrange emphasis, which can get boxy and render the 3rd and 4th strings a bit less potent and present. That said, it’s still balanced and almost never collapses into a distorted harmonic blur. The bottom end maintains an appealing growl and, as long as you use a gentler picking approach, you can use the highest four strings in very dynamic ways. Using a capo emphasizes other cool, high-mid-focused voices in the guitar that coexist well with most strumming approaches.
The Verdict
Inexpensive guitars that feel great can make up for a lot of shortcomings in tone. But the OM-320’s deficiencies in the latter regard are few, and some perceived limitations, like midrange emphasis, are intrinsic to guitars with OM dimensions. So, while forceful strumming is not the OM-320’s strength, the comfortable playability might just lead you to those places anyway. And if you compensate accordingly with touch dynamics, you can conjure many sweetly chiming tones that might sound extra sweet given the bargain price
Featuring vintage tremolos, modern slicer effects, and stereo auto-panners, the update includes clever Rate and Tempo controls for seamless syncing and morphing.
Today Kemper announces the immediate availability PROFILER OS 12.0 including the highly anticipated collection of advanced Tremolo and Slicer FX for the entire range of KEMPER PROFILER guitar amps.
The Collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever Rate and Tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values,
The new Advanced Tremolo Modules in Detail
- The Tube Bias Tremolo is the familiar Tremolo in the Kemper Profilers. Formally named "Tremolo“ and available in the PROFILERs since day one, it is a reproduction of the famous Fender Amp tremolos from the 50‘s. Placed in front of the amp it beautifully interacts with the amp distortion.
- The Photocell Tremolo dates back to the 60‘s and features a steeper pulse slope, and its width varies with the intensity.
- The Harmonic Tremolo also dates back to the 60‘s and was introduced by Fender. The low and high frequencies alternate with the tremolo rate.
- The Pulse Slicer is a modern slizer or stutter effect that will continuously transition from the smoothest sine wave to the sharpest square wave, using the "Edge“ parameter. The "Skew“ parameter changes the timing of the high level versus the low level, sometimes also called pulse width or duty cycle.
- The Saw Slicer creates a ramp like a saw wave. The saw wave has a falling ramp when "Edge“ is at full position, and a rising edge at zero position. Towards the middle position a rising and falling ramp are forming a triangle wave. The „Skew“ parameter changes the slope of the rising and falling ramp from a linear trajectory to a more convex or concave shape.
- The Pulse Autopanner and the Saw Autopanner are derivates from their respective Slicers, they spread their signals in the stereo panorama. The "Stereo“-control parameter is included in many effects of the PROFILER. Here, it introduces a novel "super-stereo" effect that lets the Autopanner send the signal well outside the regular stereo image. This effect works best if you are well positioned in the correct stereo triangle of your speakers. When you move the “Stereo” soft knob beyond the +/-100% setting, the super-stereo effect comes into place, reaching its maximum impact at +/-200%.
- A single press on the TAP button at the beginning of the bar will bring the rhythmic modulation effects, such as Tremolo or Slicer, back into sync with the music without changing the tempo. The sync will happen smoothly and almost unnoticeable, which is a unique feature. Of course, tapping the tempo is possible as well.
- Modulation Rate - The “Rate” control available in many modulation effects is based on a special philosophy that allows continuous control over the speed of the modulation and continuous Morphing, even when linked to the current tempo via the To Tempo option. The fine Rate resolution shines when seamlessly morphing from, e.g., 1/8 notes to 1/16 notes or triplets without a glitch and without losing the timing of the music.