
Photo by Mikkel Bech on Unsplash
There’s way more than blues-rock fodder buried in the crevices of the most overused scale in music.
Beginner
Intermediate
- Explain how chords are generated from scales.
- Create unusual harmonies, chord progressions, bass lines, and melodies using the blues scale.
- Demonstrate how music theory and musical intuition can coalesce to create unique sounds from traditional materials.
Last updated on May 21, 2022
Don't get me wrong, I'm all for blues music, but the blues scale can yield beguiling musical results that bear little resemblance to the traditional blues—particularly if one looks at (and listens to) the scale from a different point of view.
Chord Creation
The idea of harmonization is relatively simple. It means is to play two or more notes together at the same time. Technically speaking, two notes performed at the same time create a dyad, not a chord. It takes three or more notes performed simultaneously to create a chord, although the one exception, the two-note so-called "power chord" in Ex. 1, skews this theory a bit.
So, which two or more notes should you harmonize? Any you want! But, if you desire continuity in your compositions and playing, it's a good idea to harmonize notes from a specific scale.
Most musicians usually start with the major scale, stacking every other note of the scale on top of each other until a triad is created (Ex. 2).
From there you can start adding, or replacing notes, to create variations from these basic triads, as seen in Ex. 3.
I must point out that you can also arpeggiate these chords, playing the notes one at a time (Ex. 4). Since we are emphasizing harmony in this lesson, it helps to let them ring out.
That's the most common way to create chords, but in this lesson we're looking for something unusual. So rather than being so formulaic, let's proceed with the basic idea that playing two or more notes at the same time will work as long as they all come from the blues scale.
The blues scale is just the minor pentatonic scale with one additional note, which gets labeled #4 or a b5 depending on context. Ex. 5 shows the most common "box" pattern for the A blues scale (A–C–D–Eb–E–G). After getting a hold of this scale, I recommend working on it in the key of E and D since many of the notes can be played with open strings.
There are two considerable disparities when it comes to generating chords from the blues scale as compared to the major scale. First, the blues scale only has six notes and second, the intervals between the notes in each scale are significantly different.
This means that the blues scale creates radical changes in chord construction and nomenclature, the theory of which is far beyond the scope of this lesson. For instance, Ex. 6 is a selection of relatively common chords you can generate from the A blues scale. Later on, we will get into more exotic harmonies.
For now, all you really need to understand about the theory is that, the chords, and the melodies I've composed to fit them, all come from harmonizing notes from the A blues scale.
When Theory, Intuition, and Creativity Meet
Once the concept of harmonization is understood, the possibilities are limited only by your imagination. The following examples are just a few of the endless ideas you could generate. I have designed my examples to imitate the styles of well-known composers and guitarists and broken them down into how they are fingered on the fretboard.
Ex. 7 is a particularly fun place to start as this arpeggio is just the A blues scale, but the notes are displaced into different octaves to create chords.
For Ex. 8 I've rearranged the notes ever so slightly to create a slightly more uniform, pseudo-Slayer progression and melody.
Ex. 8
The bent note at the beginning of Ex. 9 immediately made me think of Jimmy Page, so for guitar two, I mimicked Robert Plant's chromatic vocal melody on "Misty Mountain Hop" to create this Led Zeppelin-inspired etude. Note that the first chord is labeled A5(#11) because it contains the D# almost an octave and half higher than the root, making it a #11 in relationship to the A.
Ex. 9
Ex. 10 was a happy accident I discovered while playing around with this lesson's concept. It's unashamedly Nine Inch Nails meets Andy Summers. The second chord in the progression is a little tricky to label, so I went with D5(b9) as it contains Eb an octave and one half-step away from the root, making it the b9.
Ex. 10
Ex. 11 demonstrates the power of playing unexpected, three-note chords over a static bassline, very similar to funk/fusion keyboard players in the 1970s (think Herbie Hancock and Chick Corea). To provide continuity, I've actually harmonized the blues scale using the same method discussed in Ex. 2. The chord labels I've chosen are derived from a combination of the chords and the bass line, though you'll see there are really only two chords: Cm and Asus4, played with different voicings. And take my word for it, the fact that this progression contains both Cm and Am chords is highly unusual and worth more investigation.
Ex. 11
Ex. 12 Is a pseudo-power chord riff a la Fugazi or other bands found in the post-punk/emo genres. I've started here with a variation of the A5(#11) chord. Perhaps this is the defining chord of the harmonized blues scale? The rest of the progression seems to alternate between variations of Am and G, but notice that the bass is playing different notes over the chords, providing harmonic variation. Also pay attention that B and C sections are slightly different.
Ex. 12
Comprehend and Create!
I hope by now you've realized that the key to exploiting the harmonized blues scale is to include the #4/b5 in all your progressions. This is the vital element that distinguishes the blues scale from so many others. Make your own progressions, melodies, and songs based on what we've started here. You are only limited by your imagination.
- Beyond Blues: Keeping it Simple with Blues-Scale Transitions ... ›
- Beyond Blues: The Composite Blues Scale - Premier Guitar ›
- Level Up Your Blues Phrasing - Premier Guitar ›
- Walking the Blues - Premier Guitar ›
- How to Play New Shapes on Guitar - Premier Guitar ›
- Mavis Staples' Guitar Player Rick Holmstrom on His New Solo Album 'Get It' - Premier Guitar ›
Teamwork makes the dream work for the Charleston, South Carolina, twosome, who trade off multi-instrumental duties throughout their sets.
Michael Trent and Cary Ann Hearst have been making music as Shovels & Rope since 2008. The husband-and-wife duo from South Carolina specialize in rootsy, bluesy rock, Americana, and alt-country, but they don’t confine themselves to traditional two-piece arrangements. They switch off on vocal, guitar, percussion, and synth duty throughout their shows, orchestrating a full-band ruckus with all available limbs.
Their seventh full-length, Something Is Working Up Above My Head, released in September last year, and while touring in support of it, they stopped at Nashville’s Brooklyn Bowl in late February. PG’s John Bohlinger caught up with Trent before the gig to see what tools he and Hearst use to maintain their musical juggling act.
Brought to you by D’Addario.Black Bird
Trent’s not a guitar snob: Generally speaking, he plays whatever he can get his hands on. While playing Eddie Vedder’s Ohana Fest, someone loaned him this Gretsch Black Falcon, and he fell in love with it. He likes its size compared to the broader White Falcon. It’s also the band’s only electric, so if it goes down, it’s back to acoustic. Hearst takes turns on it, too.
Trent loads the heaviest strings he can onto it, which is a set of .013s. It lives in standard tuning.
Ol' Faithful
As Trent explains, he and Hearst have done some DIY decorating on this beautiful Gibson J-45—it’s adorned with sweat droplets, stains, and fingernail dust. It runs direct to the venue’s front-of-house system with an LR Baggs pickup. This one is strung with Martin heavy or medium gauge strings; lighter ones are too prone to snapping under Trent’s heavy picking hand (which holds a Dunlop Max-Grip .88 mm pick). And it rolls around in an Enki tour case.
On Call
These second-stringers—a Loar archtop and an LR Baggs-equipped Recording King—are on hand in case of broken strings or other malfunctions.
Need for Tweed
Trent doesn’t trust amps with too many knobs, so this tweed Fender Blues Junior does the trick. It can get fairly loud, so there’s a Universal Audio OX Amp Top Box on hand to tame it for some stages.
Shovels & Rope's Pedalboard
Because Trent and Hearst trade off bass, guitar, keys, and percussion duties, all four of their limbs are active through the set. Whoever is on guitars works this board, with an MXR Blue Box, Electro-Harmonix Nano Big Muff, EarthQuaker Devices Hummingbird, and Boss OC-5, plus a pair of Walrus Canvas Tuners for the electric and acoustic. Utility boxes on the board include a Walrus Canvas Passive Re-Amp, Radial J48, Livewire ABY1, and a Mesa Stowaway input buffer.
A Roland PK-5 MIDI controller, operated by foot, sits on the lower edge of the board. It controls the board for “Thing 2,” one of two MicroKORG synths onstage.
Thing 1 and Thing 2
There’s no one backstage helping Hearst and Trent cook up all their racket; they handle every sound themselves, manually. During the first few sets of a tour, you’re liable to see some headaches, like forgetting to switch synth patches during a song, but eventually they hit a rhythm.
Affectionately given Seuss-ian nicknames, this pair of microKORGs handles bass notes through the set, among other things, via the foot-controlled PK5. “Thing 1” is set up at the drum station, and runs through a board with an EHX Nano Big Muff, EHX Bass9, EHX Nano Holy Grail, and a Radial Pro DI. A Walrus Aetos keeps them all powered up.
The board for “Thing 2,” beside the guitar amps, includes an EHX Mel9 and Bass9 powered by a Truetone 1 SPOT Pro, plus a Radial ProD2.
Featuring a newly-voiced circuit with more compression and versatility, these pedals are hand-crafted in Los Angeles for durability.
Messiah Guitars custom shop has launched a pair of new pedals: The Eddie Boostdrive Session Edition and Lil’ Ed Session Drive.
The two pedals are full-size and mini-sized versions of a newly-voiced circuit based on Messiah’s successful Eddie Boostdrive. The two new “Session” pedals feature more compression and versatility in the overall tone, and showcase Messiah’s ongoing collaboration with Nashville session guitarist Eddie Haddad.
The new Session Boostdrive schematic includes a fine-tuned EQ section (eliminating the need for the Tight switch on the earlier Boostdrive) and two independently operated circuits: a single-knob booster, and a dual-mode drive featuring a 3-band EQ. The booster consists of a single-stage MOSFET transistor providing boost ranging from -3dB to 28dB. At low settings, the boost adds sparkle to the tone, while a fully cranked setting will send your amp to a fuzzy territory. Thebooster engagement is indicated by a purple illuminated foot switch.
The overdrive contains a soft-clipped op-amp stage, inspired by a screamer-style circuit. The pedal includes a classic Silicon clipping mode (when activated, the pedal’s indicator light is blue)and an LED mode for a more open, amp-like break up (indicator light is red).
The active 3-band EQ is highly interactive and capable of emulating many popular drive sounds. Although both effects can be used separately, engaging them simultaneously produces juicy tones that will easily cut through the mix. Both new pedals accept a standard 9V pedal power supply with negative center pin.
“I love my original Boostdrive,” says Haddad, “but I wanted to explore the circuit and see if we could give it more focused features. This would make it more straightforward for guitarists who prefer simplicity in their drive pedals. The boost is super clean and loud in all the right ways…it can instantly sweeten up an amp and add more heft and sparkle to the drive section.”
Like their custom guitars and amplifiers, Messiah’s pedals are hand-crafted in Los Angeles for durability and guaranteed quality.
The Lil’ Ed Session Drive pedal includes:
- 5-knob controls, a 2-way mode side switch
- Durable, space-saving cast aluminum alloy 1590A enclosure with fun artwork
- True bypass foot switch
- Standard 9V/100mA pedal power input
The Eddie Session Edition pedal features:
- 6-knob controls, a 2-way mode switch; space-saving top-side jacks
- Durable, cast aluminum alloy 125B enclosure with fun artwork
- Easy to see, illuminated optical true bypass foot switches
- Standard 9V/100mA pedal power input
The Eddie Boostdrive Session Edition retails for $249.00, and the Lil’ Ed Session Drive for$179.
For more information, please visit messiahguitars.com.
Eddie BoostDrive and Lil' Ed pedal review with Eddie & Jax - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Joe Glaser has been a pillar of Nashville's guitar community for decades. He's a man that dreams in mechanical terms often coming up ideas while deep in a REM cycle. Through his various companies he's designed, developed, and released a handful of "blue water" solutions to age-old instrument problems making the tolerable terrific. In this comprehensive visit to Glaser's home base, we get up close and personal with several of the products that enhance intonation and playability without disrupting the guitar's integrity.
In addition, Music City Bridge CEO Joshua Rawlings introduces us to a couple software ventures. Shop Flow helps increase productivity and efficiency for guitar builders and repair shops, while Gear Check aims to help guitarist's keep track of their collection and its history. Join John Bohlinger as he goes inside this inconspicuous six-string sanctuary.
With 700 watts of power, built-in overdrive, versatile EQ options, and multiple output choices, this bass head is designed to deliver unparalleled clarity and performance in a lightweight, rugged package.
PowerStage 700 Bass is compact and durable for easy transport yet powerful enough to fill any venue. This world-class bass head can also serve as the ideal clean power platform to amplify your preamp or modeler. Streamline your rig without compromising your sound and focus on what truly matters—your music.
Designed by Seymour Duncan’s legendary engineer Kevin Beller, a lifelong bass player, this 700-watt bass head delivers unparalleled clarity and performance in a lightweight, rugged package. Whether plugging in on stage or in the studio, PowerStage 700Bass provides tight low-end and rich harmonics, with a footswitchable built-in overdrive for an extra layer of sonic versatility.
A robust, bass-optimized EQ (treble, low mid, high mid, bass and presence) tailors your sound to any room. Need to switch between active and passive basses? You’re covered - PowerStage700 Bass includes a convenient -10db pad control. Multiple output options (¼”, Speakon, XLRDI, and headphone) work for any setup, whether powering cabinets, going direct to a PA, or recording straight into your audio interface.
- 700 Watts of Power at 4 ohms• Preamp voiced for a wide range of vintage & amp; modern bass sounds
- Built-in Overdrive that can go from a light vintage saturation to full-throttle bone-grinding distortion (with optional foot-switchable control)
- Effects loop allows for post-preamp processing and easy integration with modelers and preamp pedals
- 4 band EQ, Sweepable mid controls, and presence button offer dynamic tone shaping possibilities
- Aux input
- Super lightweight and durable chassis for easy transport with our optional gig bag or rack ears.
For more information, please visit seymourduncan.com.