
Photo by Mikkel Bech on Unsplash
There’s way more than blues-rock fodder buried in the crevices of the most overused scale in music.
Beginner
Intermediate
- Explain how chords are generated from scales.
- Create unusual harmonies, chord progressions, bass lines, and melodies using the blues scale.
- Demonstrate how music theory and musical intuition can coalesce to create unique sounds from traditional materials.
Last updated on May 21, 2022
Don't get me wrong, I'm all for blues music, but the blues scale can yield beguiling musical results that bear little resemblance to the traditional blues—particularly if one looks at (and listens to) the scale from a different point of view.
Chord Creation
The idea of harmonization is relatively simple. It means is to play two or more notes together at the same time. Technically speaking, two notes performed at the same time create a dyad, not a chord. It takes three or more notes performed simultaneously to create a chord, although the one exception, the two-note so-called "power chord" in Ex. 1, skews this theory a bit.
So, which two or more notes should you harmonize? Any you want! But, if you desire continuity in your compositions and playing, it's a good idea to harmonize notes from a specific scale.
Most musicians usually start with the major scale, stacking every other note of the scale on top of each other until a triad is created (Ex. 2).
From there you can start adding, or replacing notes, to create variations from these basic triads, as seen in Ex. 3.
I must point out that you can also arpeggiate these chords, playing the notes one at a time (Ex. 4). Since we are emphasizing harmony in this lesson, it helps to let them ring out.
That's the most common way to create chords, but in this lesson we're looking for something unusual. So rather than being so formulaic, let's proceed with the basic idea that playing two or more notes at the same time will work as long as they all come from the blues scale.
The blues scale is just the minor pentatonic scale with one additional note, which gets labeled #4 or a b5 depending on context. Ex. 5 shows the most common "box" pattern for the A blues scale (A–C–D–Eb–E–G). After getting a hold of this scale, I recommend working on it in the key of E and D since many of the notes can be played with open strings.
There are two considerable disparities when it comes to generating chords from the blues scale as compared to the major scale. First, the blues scale only has six notes and second, the intervals between the notes in each scale are significantly different.
This means that the blues scale creates radical changes in chord construction and nomenclature, the theory of which is far beyond the scope of this lesson. For instance, Ex. 6 is a selection of relatively common chords you can generate from the A blues scale. Later on, we will get into more exotic harmonies.
For now, all you really need to understand about the theory is that, the chords, and the melodies I've composed to fit them, all come from harmonizing notes from the A blues scale.
When Theory, Intuition, and Creativity Meet
Once the concept of harmonization is understood, the possibilities are limited only by your imagination. The following examples are just a few of the endless ideas you could generate. I have designed my examples to imitate the styles of well-known composers and guitarists and broken them down into how they are fingered on the fretboard.
Ex. 7 is a particularly fun place to start as this arpeggio is just the A blues scale, but the notes are displaced into different octaves to create chords.
For Ex. 8 I've rearranged the notes ever so slightly to create a slightly more uniform, pseudo-Slayer progression and melody.
Ex. 8
The bent note at the beginning of Ex. 9 immediately made me think of Jimmy Page, so for guitar two, I mimicked Robert Plant's chromatic vocal melody on "Misty Mountain Hop" to create this Led Zeppelin-inspired etude. Note that the first chord is labeled A5(#11) because it contains the D# almost an octave and half higher than the root, making it a #11 in relationship to the A.
Ex. 9
Ex. 10 was a happy accident I discovered while playing around with this lesson's concept. It's unashamedly Nine Inch Nails meets Andy Summers. The second chord in the progression is a little tricky to label, so I went with D5(b9) as it contains Eb an octave and one half-step away from the root, making it the b9.
Ex. 10
Ex. 11 demonstrates the power of playing unexpected, three-note chords over a static bassline, very similar to funk/fusion keyboard players in the 1970s (think Herbie Hancock and Chick Corea). To provide continuity, I've actually harmonized the blues scale using the same method discussed in Ex. 2. The chord labels I've chosen are derived from a combination of the chords and the bass line, though you'll see there are really only two chords: Cm and Asus4, played with different voicings. And take my word for it, the fact that this progression contains both Cm and Am chords is highly unusual and worth more investigation.
Ex. 11
Ex. 12 Is a pseudo-power chord riff a la Fugazi or other bands found in the post-punk/emo genres. I've started here with a variation of the A5(#11) chord. Perhaps this is the defining chord of the harmonized blues scale? The rest of the progression seems to alternate between variations of Am and G, but notice that the bass is playing different notes over the chords, providing harmonic variation. Also pay attention that B and C sections are slightly different.
Ex. 12
Comprehend and Create!
I hope by now you've realized that the key to exploiting the harmonized blues scale is to include the #4/b5 in all your progressions. This is the vital element that distinguishes the blues scale from so many others. Make your own progressions, melodies, and songs based on what we've started here. You are only limited by your imagination.
- Beyond Blues: Keeping it Simple with Blues-Scale Transitions ... ›
- Beyond Blues: The Composite Blues Scale - Premier Guitar ›
- Level Up Your Blues Phrasing - Premier Guitar ›
- Walking the Blues - Premier Guitar ›
- How to Play New Shapes on Guitar - Premier Guitar ›
- Mavis Staples' Guitar Player Rick Holmstrom on His New Solo Album 'Get It' - Premier Guitar ›
A 6L6 power section, tube-driven spring reverb, and a versatile array of line outs make this 1x10 combo an appealing and unique 15-watt alternative.
Supro Montauk 15-watt 1 x 10-inch Tube Combo Amplifier - Blue Rhino Hide Tolex with Silver Grille
Montauk 110 ReverbThe two-in-one “sonic refractor” takes tremolo and wavefolding to radical new depths.
Pros: Huge range of usable sounds. Delicious distortion tones. Broadens your conception of what guitar can be.
Build quirks will turn some users off.
$279
Cosmodio Gravity Well
cosmod.io
Know what a wavefolder does to your guitar signal? If you don’t, that’s okay. I didn’t either until I started messing around with the all-analog Cosmodio Instruments Gravity Well. It’s a dual-effect pedal with a tremolo and wavefolder, the latter more widely used in synthesis that , at a certain threshold, shifts or inverts the direction the wave is traveling—in essence, folding it upon itself. Used together here, they make up what Cosmodio calls a sonic refractor.
Two Plus One
Gravity Well’s design and control set make it a charm to use. Two footswitches engage tremolo and wavefolder independently, and one of three toggle switches swaps the order of the effects. The two 3-way switches toggle different tone and voice options, from darker and thicker to brighter and more aggressive. (Mixing and matching with these two toggles yields great results.)
The wavefolder, which has an all-analog signal path bit a digitally controlled LFO, is controlled by knobs for both gain and volume, which provide enormous dynamic range. The LFO tremolo gets three knobs: speed, depth, and waveform. The first two are self-explanatory, but the latter offers switching between eight different tremolo waveforms. You’ll find standard sawtooth, triangle, square, and sine waves, but Cosmodio also included some wacko shapes: asymmetric swoop, ramp, sample and hold, and random. These weirder forms force truly weird relationships with the pedal, forcing your playing into increasingly unpredictable and bizarre territories.
This is all housed in a trippy, beautifully decorated Hammond 1590BB-sized enclosure, with in/out, expression pedal, and power jacks. I had concerns about the durability of the expression jack because it’s not sealed to its opening with an outer nut and washer, making it feel more susceptible to damage if a cable gets stepped on or jostled near the connection, as well as from moisture. After a look at the interior, though, the build seems sturdy as any I’ve seen.
Splatterhouse Audio
Cosmodio’s claim that the refractor is a “first-of-its-kind” modulation effect is pretty grand, but they have a point in that the wavefolder is rare-ish in the guitar domain and pairing it with tremolo creates some pretty foreign sounds. Barton McGuire, the Massachusetts-based builder behind Cosmodio, released a few videos that demonstrate, visually, how a wavefolder impacts your guitar’s signal—I highly suggest checking them out to understand some of the principles behind the effect (and to see an ’80s Muppet Babies-branded keyboard in action.)
By folding a waveform back on itself, rather than clipping it as a conventional distortion would, the wavefolder section produces colliding, reflecting overtones and harmonics. The resulting distortion is unique: It can sound lo-fi and broken in the low- to mid-gain range, or synthy and extraterrestrial when the gain is dimed. Add in the tremolo, and you’ve got a lot of sonic variables to play with.
Used independently, the tremolo effect is great, but the wavefolder is where the real fun is. With the gain at 12 o’clock, it mimics a vintage 1x10 tube amp cranked to the breaking point by a splatty germanium OD. A soft touch cleans up the signal really nicely, while maintaining the weirdness the wavefolder imparts to its signal. With forceful pick strokes at high gain, it functions like a unique fuzz-distortion hybrid with bizarre alien artifacts punching through the synthy goop.
One forum commenter suggested that the Gravity Well effect is often in charge as much the guitar itself, and that’s spot on at the pedal's extremes. Whatever you expect from your usual playing techniques tends to go out the window —generating instead crumbling, sputtering bursts of blubbering sound. Learning to respond to the pedal in these environments can redefine the guitar as an instrument, and that’s a big part of Gravity Well’s magic.
The Verdict
Gravity Well is the most fun I’ve had with a modulation pedal in a while. It strikes a brilliant balance between adventurous and useful, with a broad range of LFO modulations and a totally excellent oddball distortion. The combination of the two effects yields some of the coolest sounds I’ve heard from an electric guitar, and at $279, it’s a very reasonably priced journey to deeply inspiring corners you probably never expected your 6-string (or bass, or drums, or Muppet Babies Casio EP-10) to lead you to.
Kemper and Zilla announce the immediate availability of Zilla 2x12“ guitar cabs loaded with the acclaimed Kemper Kone speaker.
Zilla offers a variety of customization to the customers. On the dedicated Website, customers can choose material, color/tolex, size, and much more.
The sensation and joy of playing a guitar cabinet
Sometimes, when there’s no PA, there’s just a drumkit and a bass amp. When the creative juices flow and the riffs have to bounce back off the wall - that’s the moment when you long for a powerful guitar cabinet.
A guitar cabinet that provides „that“ well-known feel and gives you that kick-in-the-back experience. Because guitar cabinets can move some serious air. But these days cabinets also have to be comprehensive and modern in terms of being capable of delivering the dynamic and tonal nuances of the KEMPER PROFILER. So here it is: The ZILLA 2 x 12“ upright slant KONE cabinet.
These cabinets are designed in cooperation with the KEMPER sound designers and the great people from Zilla. Beauty is created out of decades of experience in building the finest guitar cabinets for the biggest guitar masters in the UK and the world over, combined with the digital guitar tone wizardry from the KEMPER labs. Loaded with the exquisit Kemper Kone speakers.
Now Kemper and Zilla bring this beautiful and powerful dream team for playing, rehearsing, and performing to the guitar players!
ABOUT THE KEMPER KONE SPEAKERS
The Kemper Kone is a 12“ full range speaker which is exclusively designed by Celestion for KEMPER. By simply activating the PROFILER’s well-known Monitor CabOff function the KEMPER Kone is switched from full-range mode to the Speaker Imprint Mode, which then exactly mimics one of 19 classic guitar speakers.
Since the intelligence of the speaker lies in the DSP of the PROFILER, you will be able to switch individual speaker imprints along with your favorite rigs, without needing to do extensive editing.
The Zilla KEMPER KONE loaded 2x12“ cabinets can be custom designed and ordered for an EU price of £675,- UK price of £775,- and US price of £800,- - all including shipping (excluding taxes outside of the UK).
For more information, please visit kemper-amps.com or zillacabs.com.
The author in the spray booth.
Does the type of finish on an electric guitar—whether nitro, poly, or oil and wax—really affect its tone?
There’s an allure to the sound and feel of a great electric guitar. Many of us believe those instruments have something special that speaks not just to the ear but to the soul, where every note, every nuance feels personal. As much as we obsess over the pickups, wood, and hardware, there’s a subtler, more controversial character at play: the role of the finish. It’s the shimmering outer skin of the guitar, which some think exists solely for protection and aesthetics, and others insist has a role influencing the voice of the instrument. Builders pontificate about how their choice of finishing material may enhance tone by allowing the guitar to “breathe,” or resonate unfettered. They throw around terms like plasticizers, solids percentages, and “thin skin” to lend support to their claims. Are these people tripping? Say what you will, but I believe there is another truth behind the smoke.
It’s the shimmering outer skin of the guitar, which some think exists solely for protection and aesthetics, and others insist has a role influencing the voice of the instrument. Builders pontificate about how their choice of finishing material may enhance tone by allowing the guitar to “breathe,” or resonate unfettered. They throw around terms like plasticizers, solids percentages, and “thin skin” to lend support to their claims. Are these people tripping? Say what you will, but I believe there is another truth behind the smoke.
Nitrocellulose lacquer, or “nitro,” has long been the finish of choice for vintage guitar buffs, and it’s easy to see why. Used by Fender, Gibson, and other legendary manufacturers from the 1950s through the 1970s, nitro has a history as storied as the instruments it’s adorned. Its appeal lies not just in its beauty but in its delicate nature. Nitro, unlike some modern finishes, can be fragile. It wears and cracks over time, creating a visual patina that tells the story of every song, every stage, every late-night jam session. The sonic argument goes like this: Nitro is thin, almost imperceptible. It wraps the wood like silk. The sound is unhindered, alive, warm, and dynamic. It’s as if the guitar has a more intimate connection between its wood and the player's touch. Of course, some call bullscheiße.
In my estimation, nitro is not just about tonal gratification. Just like any finish, it can be laid on thick or thin. Some have added flexibility agents (those plasticizers) that help resist damage. But as it ages, old-school nitro can begin to wear and “check,” as subtle lines weave across the body of the guitar. And with those changes comes a mellowing, as if the guitar itself is growing wiser with age. Whether a tonal shift is real or imagined is part of the mystique, but it’s undeniable that a nitro-finished guitar has a feel that harkens back to a romantic time in music, and for some that’s enough.
Enter the modern era, and we find a shift toward practicality—polyurethane and polyester finishes, commonly known as “poly.” These finishes, while not as romantic as nitro, serve a different kind of beauty. They are durable, resilient, and protective. If nitro is like a delicate silk scarf, poly is armor—sometimes thicker, shinier, and built to last. The fact that they reduce production times is a bonus that rarely gets mentioned. For the player who prizes consistency and durability, poly is a guardian. But in that protection, some say, comes a price. Some argue that the sound becomes more controlled, more focused—but less alive. Still, poly finishes have their own kind of charm. They certainly maintain that showroom-fresh look, and to someone who likes to polish and detail their prized possessions, that can be a big plus.
“With those changes comes a mellowing, as if the guitar itself is growing wiser with age.”
For those seeking an even more natural experience, oil and wax finishes offer something primal. These finishes, often applied by hand, mostly penetrate the wood as much as coating it, leaving the guitar’s surface nearly bare. Proponents of oil and/or wax finishes say these materials allow the wood to vibrate freely, unencumbered by “heavy” coatings. The theory is there’s nothing getting in the way—sort of like a nudist colony mantra. Without the protection of nitro or poly, these guitars may wear more quickly, bearing the scars of its life more openly. This can be seen as a plus or minus, I imagine.
My take is that finishes matter because they are part of the bond we have with our instruments. I can’t say that I can hear a difference, and I think a myth has sprouted from the acoustic guitar world where maybe you can. Those who remove their instrument’s finish and claim to notice a difference are going on memory for the comparison. Who is to say every component (including strings) went back together exactly the same? So when we think about finishes, we’re not just talking about tone—we’re thinking about the total connection between musician and instrument. It’s that perception that makes a guitar more than just wood and wire. The vibe makes it a living, breathing part of the music—and you.