
The Spring King Junior follows in the footsteps of the original Spring King reverb, however, with a much smaller footprint.
Building on a 25-year legacy, Danelectro has launched the brand new Spring King Junior reverb pedal.
"Danelectroās new Spring King Junior offers authentic reverb from a real built-in spring tankā¦but in a more compact pedalboard-friendly size. And the Spring King Junior passes the ultimate spring reverb test with flying colors: bump it and youāll get thunderous reverb sound, just like vintage spring reverbs."
Spring King Junior features include:
- Built-in spring reverb tank
- True bypass soft switching
- Two knobs for controlling reverb Depth and Tone
- Standard 9-volt DC input; no battery compartment
- Rugged die-cast case measuring 2-1/2ā wide x 6ā long x 2-1/8ā high
Danelectroās Spring King Junior carries a street price of $199.
- Danelectro 3699 Review āŗ
- Quick Hit: Danelectro 59 M-NOS Review āŗ
- Danelectro Dead On '67 Guitar Review āŗ
Thereās so much more that goes into building a pedalābut you do need to get your workstation in order first.
Think that price tag on that pedal is a bit high? Thereās a lot more that goes into it than just whatās in the box.
The inspiration for this topic comes from a recent video published by JHS Pedals. The video consists of Josh Scott giving an honest breakdown and rebuttal to a video posted to YouTube by John Nathan Cordy. In Cordyās clip, he disassembles a JHS pedal while asking if the general consumer is getting āripped offā because the cost of the parts isnāt very exorbitant. (Cordy later issued an apology.) Iāve often lived by the motto, āYouāre not paying for the parts; youāre paying for how theyāre put together.ā So, what goes into making a pedal, and are they overpriced? Thereās a lot to cover, so letās dig in.
It can be easy for a consumer to get bogged down by the cost of the end product in relation to the value of raw materials. This is made even more evident given that we have access to the value of the raw materials. A quick web search for a Fuzz Face schematic, followed by some research on where to purchase those components, along with their value, might leave you scratching your head as to why a boutique manufacturer might be selling a Fuzz Face-style pedal for $199 and up. Iād immediately point out that your head isnāt the only thing that weāve scratched in this exampleāweāve only scratched the surface of the cost.
Letās say Iām a contractor, and you want me to put up a fence on your property, and I buy $100 worth of wood and nails and put it up in 10 hours. Is that job worth $100? No. I donāt think anyone reading this would think that. People understand costs when they go past the tangible. Weāre talking about labor. The very thing that employees are reimbursed for. Thatās still not the aspect that I think the common consumer struggles to grasp. I think that they have a disconnect when it comes to the ancillary. In this example, it would be the cost of the tools, the insurance and fuel for the work truck, and the advertising cost for the page where you found the contractor in the first place. Letās bring this back to pedals and unpack this a little bit more.
Iām going to attempt to outline bringing a pedal to life, from the inception of the idea to the selling of the final productāall while trying to expose the costs that I think people forget or simply donāt know about. I feel like a magician right now. āIām going to attempt to make 15 buses appear on this skyscraper. All while hanging upside down and blindfolded.ā Anyway, letās give it a try.
āYouāre not paying for the parts; youāre paying for how theyāre put together.ā
We know that the cost of the parts for a fuzz pedal is on the low side. Residing here in America (and for me in New England), we know that labor costs are on the higher side. But letās keep digging up and exposing those forgotten or unknown running costs. After the idea of making the product, it starts with having the space to design and work on it. That would be rent, business insurance, liability insurance if there are employees, and common utilities bills. You need a bench to work at with adequate lighting, storage for the parts, and the parts themselves. These parts are only in our possession after hours of research on which parts we want to use. This includes specs like tolerance, material construction, component size, lead pitch, voltage ratings, and so on. But letās not jump the gun. We need to order a variety of parts so that we can assemble the circuit on a breadboard, test it, make changes and additions, and record the results onto a schematic. That is, of course, after we purchase and learn how to work on a breadboard, and connect it to an instrument and amplifier. Then we need to learn how to read and write in the language that is electronics schematics. This is something that 95 percent of pedalbuilders learn on their own. So thereās no formal education cost here, but itās hours and hours of learning.
Letās say weāve made it this far and we know what we want to use in the fuzz circuit. Next, we order the parts (most likely from several suppliers and pay separate shipping costs for all). Once they arrive, we stock them in their appropriate locations. Now weāve arrived at a big step: turning what we have on the breadboard and schematic into a circuit board that mates with an enclosure. Oh, dear!
Join me for part two as I break down the next steps in this journey from idea to final productāand final price.
Light and very comfortable to play. Creative tonal options. Excellent hardware.
P-90s may be too hot or bright for some. Middle pickup not as articulate as expectedāand surprisingly difficult to activate on the fly.
$1,229
Vola Guitars JZ FRO
volaguitars.com
Pro hardware, unusual circuit tweaks, and killer playability lend new twists to the P-90 solidbody template.
For nearly 10 years, Vola Guitars' Japan-made instruments stood out for their somewhat unorthodox features, quality execution, visual vibes that walk the line between traditional and modern, and mid-level prices that rival industry heavyweights. In the companyās varied line of 6- and 7-string guitars (and 4- and 5-string basses), the JZ FRO is more on the traditional end. Yet it still stakes out its own territory in terms of style and performance.
Subtle Upgrades
Volaās most distinctive aesthetic feature is undoubtedly the bodyline scoop/flourish near the rear strap button. On the JZ FRO, it lends a dash of elegance and sophistication to an outline that might otherwise seem too literally Jazzmaster-like, while the handsome roasted maple neck, swooped reverse headstock, and nonstandard pickup scheme help make it clear this isnāt your average offset. Itās a classy, understated look even in the modelās flashier aged-copper and shell-pink hues. But look closer and youāll note appointments that a lot of seasoned guitarists will appreciate, including Luminlay position markers, stainless steel frets, and a direct-to-output circuit bypass switch situated between the volume and tone knobs.
Slicing and Then Some
Itās not often you see a solidbody outfitted with a pair of humbucker-sized P-90s anda Strat-style middle pickup. The P-90s are alnico 5 units measuring 9.5k and 10.5k ohms resistance. To avail you of this circuitās numerous tones the JZ FRO incorporates a deceptively simple-looking control array. Thereās a lone tone knob, a traditional 3-way selector, and a master volume that pulls up to bring the S-style middle pickup into the mix. In this mode, with the pickup selector down, you get the bridge and middle pickup, in the middle you get all three pickups, and in the up position you get the neck and middle pickups. (More on mid-pickup tones in a minute.)
The P-90s are pretty hot, with a lot of punch and zing. In fact, the bridge pickupās leanness and the neck pickupās gristliness sometimes evoke Gibson P-100s.
With the JZ FRO routed through a Celestion Ruby-outfitted 6973-powered combo set to a bit of grind, I loved the bridge pickupās tough airiness. Thereās a detailed, vintage-esque character, and it gets toothier as you pair it with a boost or dirt pedal to drive an amp hard. Compared to the vintage-spec Curtis Novak P-90s in my Les Paul Special, the Volaās bridge pickup is a little less warm and brawny, but also probably a bit more malleable and adaptable to different genres, especially if youāve got a lot of effects in your signal path. The neck pickup is similarly powerful, though its contrasts with a traditionally voiced P-90 feel less apparent.
How about that middle pickup? Paired with the bridge unit, it yields funky, Strat-like quackāa tone youāre not going to get with most dual P-90 guitars. Accent them with a wiggle of the super smooth-operating Gotoh trem, and the Strat allusion is even stronger. Mind you, all this tone variation is available beforeyou activate the tone-circuit bypass. It acts like a powerful onboard boost: Everything is louder, hotter, and leaner.The Verdict
Vola deserves big kudos for packing so many unique features into a guitar that feels and plays this nicely at such a reasonable price. The novel tone-circuit bypass could help you cut through a dense mix or boost your solo even when youāre away from your pedalboard. That said, in some positions I found it sounded a little strident or hi-fi, and the fact that the circuit-bypass mode renders the volume knob useless makes it something of an all-or-nothing proposition. The added middle pickup expands tonal possibilities beyond P-90 norms, but donāt expect the same type of added clarity youād get from a Stratās middle pickup. Even so, the JZ FROās exceptionally smooth performing hardware and excellent craftsmanship make playing a breeze and a pleasure, and its VFP90 pickups pack a mix of power, clarity, and flexibility that make it a great choice for biting rock and thick, bristling blues tones.
Tighten up your rhythm playing by focusing on how to get a great sound, balancing your wrist and elbow, and understanding how to subdivide rhythms.
Nile Rodgers brings the rhythm at Bonnaroo 2018.
How the rhythm-playing hitmaker behind Chicāand our columnistālearned to love pop music, and why maybe you should, too.
When Nile Rodgers speaks, we should listen. His seminal work with his own band, Chic, as well as Sister Sledge, Michael Jackson, Mick Jagger, Eric Clapton, Peter Gabriel, Madonna, David Bowie, and Daft Punk, has made him a legend. He also filmed an entertaining Rig Rundown with PG just last year.
I recently listened to his 2017 South by Southwest address, where he told a story about a formative moment in his life. Nile was complaining to his guitar teacher, Ted Dunbar, about having to sing the Archiesā āSugar, Sugarāat an upcoming cover band gig. Dunbar replied, āLet me tell you something. Any song that sells and gets to the Top 40 ... is a great composition.ā Rodgers was skeptical. Then Dunbar added, āEspecially āSugar, Sugar.ā That has been No. 1 for four or five weeks.ā Next, Dunbar said something that changed Rodgerās life. āāSugar, Sugarā was successful,ā he said, ābecause it speaks to the souls of a million strangers.ā Rodgers noted: āTwo weeks later, I wrote a song called āEverybody Dance.āā Released in 1977, it was a Top 40 single on Chic's first album.
In a BBC This Cultural Life interview, Rodgers said that Dunbar ādescribed an artist to me. I wasnāt an artist until he defined that. I wanted to speak to the souls of a million strangers, but I thought what I wanted to do was speak to some real cool people hanging out in jazz clubs.ā
āEverybody Danceā and āSugar, Sugarāboth have hypnotizingly simple lyrics you inevitably replay in your head. Humans like chants, cheers, slogans, and catchy choruses. Rodgers' success came, at least in part, from opening himself up to simplicity that appeals to the masses instead of the complexity that appeals to jazzers. Thatās the irony. Jazz, which ostensibly is all about freedom, is often restrictive. Like the old joke goes, jazzers play millions of chords for four people. Pop, rock, and country artists play four chords for millions of people.
Rodgers said, āThat's what my teacher taught me, that anti-snobbery. Be open. Love all the music you are around, or at least try and appreciate what that artist is trying to say. Try and have, what we call in the music business, big ears.ā
My friends and I have all, at times, been music snobs. I went through a blues binge in my youth where I was prejudiced against shredders. This was not uncommon at the time. After Nirvana hit with Nevermind in 1991, suddenly musicians were openly mocked for playing complex, difficult parts. It was almost like if you cared enough to really learn to play guitar, you were uncool. That was a big relief for me, as I could play neither complex nor difficult parts at the time.
āTaylor Swift is the Beatles of my daughterās generation.ā
Later, when I moved to Nashville, I was all about clean Telecasters and thought ill of music with lots of dirt or effects. Younger me would have plenty of condescending quips about my current love of overdriven humbuckers and delay. Most of my snobbery was driven by my deep insecurities, but part of it was tribalism. The heart wants what it wants; when you find your musical tribe, most of the young zealots trade all others for their one true religion. It might be the only way to get good at something.
On the other hand, my friends and I listen to a variety of music, but the common factor is it usually involves good guitar playing. We love what we love because it speaks to our souls. But most guitar players are drawn to those who are doing what we wish we could do. My uncle Fred used to say, āThereās nothing wrong with being a snob. It just means that you have good taste.ā
Between club dates, sessions, and the occasional TV gig, I play with tons of people. I have no say in the set list, so āSugar, Sugarā moments are unavoidable. I used to feel deep shame playing those types of songs, like it reflects poorly on my personal taste or abilities. In short, I was prejudiced until I saw all of the true pros who could find something beautiful, challenging in the seemingly mundane. Itās like the old actorās adage: There are no small parts, just small players.
According to Forbes, Taylor Swift was āThe Biggest Artist in the World in 2023.ā That being the case, her songs inevitably come up on cover gigs. When this happens, some musicians might groan, like it makes them cool to hate on pop culture. But thatās probably because they don't really know her work. Taylor Swift is my 8-year-old daughterās Alexa go-to, so I know Taylorās catalog really well. Turns out, itās amazing, full of truly catchy, engaging, touching songs. Taylor Swift is the Beatles of my daughterās generation. Snobs will think that statement is heresy, but snobs often donāt know what they are talking about, and they never have as much fun as the people who are dancing violently to āShake It Off,ā or singing with eyes closed to āAll Too Well.ā