The use of samples by hip-hop producers is part of a much longer tradition that goes back to the roots of jazz.
A lot has been made of the fact that a large portion of early hip-hop was based on “taking” pre-existing songs and recordings, created decades before, and presenting them in a new, different light. This process was known as sampling, named for the sampler, which could literally record chunks of time as digital audio and allow users to manipulate it at will via keyboards or drum pads.
The best examples of these machines, which included the Akai MPC60 and Ensoniq ASR-10, allowed users to change the pitch, reverse, chop into pieces, sequence, alter dynamics, and much more. Aside from the technology that made all this possible, the intended usage, as defined by the designers, was not all that different to earlier instruments like the Mellotron. However, what hip-hop producers did with sampling technology and all those extra parameters, was wholly different.
Depending on who one asks, the age of sampling confirmed that hip-hop’s early producers were either truly lazy or geniuses. The lazy part is the most obvious and unimaginative take—they didn’t create the music they sampled, and in many cases, didn’t credit the original composer. The genius part requires a little more open-mindedness and understanding of what was actually occurring, both from a musical and cultural perspective.
Some have argued that, aside from playing traditional instruments at a very high level, there was actually very little difference between what hip-hop producers did and what jazz musicians had been doing for many decades before. Just like hip-hop producers, jazz musicians took existing music, created for one purpose, and manipulated it, transforming it into their vehicle, for another.
In the beginning, this transformation was mostly stylistic/rhythmic, leaving the original song clearly discernible to the listener. But by the time we get to John Coltrane, we were observing jazz musicians who improvised over earlier songs by other composers, which had been transformed to the point of being unrecognizable, even to the most sophisticated of ears. Take, for example, Coltrane’s “Fifth House” (1961), which was actually based on “What Is This Thing Called Love,” a well-known Cole Porter composition written for the 1929 musical Wake Up and Dream.
In the case of hip-hop, the goal was to create interesting vehicles for emcees to rap over. One of the earliest examples was “Rapper’s Delight” (1979), where the Sugarhill Gang literally looped an entire instrumental section of Chic’s “Good Times” (1979), transforming it into the perfect vehicle for 14 minutes and 37 seconds of nonstop rapping. Later on, hip-hop producers such as J Dilla contorted the samples used in their productions to the point where, even to this day, fans still argue over exactly where they came from. The most creative hip-hop producers have drawn from far and disparate sources to find the samples they use in their productions.“Hip-hop producers such as J Dilla contorted the samples used in their productions to the point where, even to this day, fans still argue over exactly where they came from.”
In my opinion, it cannot be refuted that both jazz and hip-hop musicians mastered this process by constantly pushing the envelope. All the while, they constantly used pre-existing art and transformed it to serve a completely different purpose, in aid of a completely different artistic statement. Theirs was a process of re-contextualization and this was central to both musics. Neither jazz nor hip-hop musicians were interested in simply “covering” popular songs, which audiences at the time already loved, in the way that a wedding band might. To go further, many of their transformations were so extreme that it would’ve probably just been easier for them to create completely new compositions. Many of them certainly possessed the ability to do so. So, why did they sample? I would argue that recontextualizing is not unique to literature, jazz, or even hip-hop. It is a fundamental technique employed by artists within many disciplines, and most likely has been for millennia.
The saying “There is nothing new under the sun” is apt. In reality, the actual nature of music is such that everything is based on something earlier. There are precious few artists who have actually created anything which could be considered completely new, and this is even more so the case post the establishment of the modern music industry. How many songs use exactly the same progression, or melody, or arrangements, or drum patterns, or bass lines? This is before we even consider lyrical content! There’s a reason why plagiarism within music is confined to a very narrow set of circumstances. Covering, reinterpreting, or recontextualizing earlier music is what most musicians have done for the vast majority of history.
Like jazz before it, hip-hop provided new leases on life for many long-forgotten songs. That also came with the additional benefit of more profit for publishers, but ironically, in the end, it was publishing that killed sampling. It just became too expensive, with some publishers asking so much for sample clearances that there was nothing left for anybody else. At first, producers tried to “recreate” samples with slight changes to get around this, but a few lawsuits later, it became clear that using samples was over.
EBS introduces the Solder-Free Flat Patch Cable Kit, featuring dual anchor screws for secure fastening and reliable audio signal.
EBS is proud to announce its adjustable flat patch cable kit. It's solder-free and leverages a unique design that solves common problems with connection reliability thanks to its dual anchor screws and its flat cable design. These two anchor screws are specially designed to create a secure fastening in the exterior coating of the rectangular flat cable. This helps prevent slipping and provides a reliable audio signal and a neat pedal board and also provide unparalleled grounding.
The EBS Solder-Free Flat Patch Cable is designed to be easy to assemble. Use the included Allen Key to tighten the screws and the cutter to cut the cable in desired lengths to ensure consistent quality and easy assembling.
The EBS Solder-Free Flat Patch Cable Kit comes in two sizes. Either 10 connector housings with 2,5 m (8.2 ft) cable or 6 connectors housings with 1,5 m (4.92 ft) cable. Tools included.
Use the EBS Solder-free Flat Patch Cable Kit to make cables to wire your entire pedalboard or to create custom-length cables to use in combination with any of the EBS soldered Flat Patch Cables.
Estimated Price:
MAP Solder-free Flat Patch Cable Kit 6 pcs: $ 59,99
MAP Solder-free Flat Patch Cable Kit 10 pcs: $ 79,99
MSRP Solder-free Flat Patch Cable Kit 6 pcs: 44,95 €
MSRP Solder-free Flat Patch Cable Kit 10 pcs: 64,95 €
For more information, please visit ebssweden.com.
Upgrade your Gretsch guitar with Music City Bridge's SPACE BAR for improved intonation and string spacing. Compatible with Bigsby vibrato systems and featuring a compensated lightning bolt design, this top-quality replacement part is a must-have for any Gretsch player.
Music City Bridge has introduced the newest item in the company’s line of top-quality replacement parts for guitars. The SPACE BAR is a direct replacement for the original Gretsch Space-Control Bridge and corrects the problems of this iconic design.
As a fixture on many Gretsch models over the decades, the Space-Control bridge provides each string with a transversing (side to side) adjustment, making it possible to set string spacing manually. However, the original vintage design makes it difficult to achieve proper intonation.
Music City Bridge’s SPACE BAR adds a lightning bolt intonation line to the original Space-Control design while retaining the imperative horizontal single-string adjustment capability.
Space Bar features include:
- Compensated lightning bolt design for improved intonation
- Individually adjustable string spacing
- Compatible with Bigsby vibrato systems
- Traditional vintage styling
- Made for 12-inch radius fretboards
The SPACE BAR will fit on any Gretsch with a Space Control bridge, including USA-made and imported guitars.
Music City Bridge’s SPACE BAR is priced at $78 and can be purchased at musiccitybridge.com.
For more information, please visit musiccitybridge.com.
The Australian-American country music icon has been around the world with his music. What still excites him about the guitar?
Keith Urban has spent decades traveling the world and topping global country-music charts, and on this episode of Wong Notes, the country-guitar hero tells host Cory Wong how he conquered the world—and what keeps him chasing new sounds on his 6-string via a new record, High, which releases on September 20.
Urban came up as guitarist and singer at the same time, and he details how his playing and singing have always worked as a duet in service of the song: “When I stop singing, [my guitar] wants to say something, and he says it in a different way.” Those traits served him well when he made his move into the American music industry, a story that begins in part with a fateful meeting with a 6-string banjo in a Nashville music store in 1995.
It’s a different world for working musicians now, and Urban weighs in on the state of radio, social media, and podcasts for modern guitarists, but he still believes in word-of-mouth over the algorithm when it comes to discovering exciting new players.
And in case you didn’t know, Keith Urban is a total gearhead. He shares his essential budget stomps and admits he’s a pedal hound, chasing new sounds week in and week out, but what role does new gear play in his routine? Urban puts it simply: “I’m not chasing tone, I’m pursuing inspiration.”
Wong Notes is presented by DistroKid.
Use this link for 30% off your first year.
PG contributor Tom Butwin takes a deep dive into LR Baggs' HiFi Duet system.