A session man’s take on the sound of a great tube amp—without the glowing glass.
Wickedly great EQ controls. A very musical range of overdrive tones.
Tight control can be a bit too subtle.
The Tilt is a new collaboration between Revv and session ace Shawn Tubbs that combines a robust medium-gain overdrive with a nuanced clean boost. Around Nashville, Tubbs has a reputation for burning lead lines and immaculately crafted tones. Designed to emulate the feel and response of a cranked single-channel amp, the Tilt absolutely nails the mission at hand. The overdrive circuit is based on LED clipping and features a rather simple control setup with volume, gain, bass, and treble. On the other side you have a 12 dB clean boost with two rather interesting controls: tilteq and a three-way tight toggle switch.
I tested the Tilt with my HSS Fender Stratocaster and a T-style Schroeder Chopper TL into a clean Fender Hot Rod Deluxe. Starting with the overdrive, I was quite impressed with how accurate and clear the EQ controls were. There were useful settings throughout the different frequency ranges. The drive was softer in the midrange than I was expecting but allowed for richer harmonics as I moved through different pickup positions. Not surprisingly, the sound of a dirty, cranked Princeton came to mind as I was exploring the width of the gain control. Mike Campbell tones for days.
It’s not likely that anyone would mistake the Tilt for a high-gain monster, but with the gain cranked it does an admiral job of emulating Marshall-style tones—especially when you kick in the boost. The standout feature on the boost side is the tilteq, which simultaneously affects the lows and highs depending on which direction you turn it. My setup with the Schroeder was a bit bright, so I was able to surgically slice out some high end with ease with both the EQ and toggle switch, which affects the overall voicing of the boost. While none of us will get the exact same tone that Tubbs is famous for, the Tilt can shine a brighter light on the best parts of what you sound like.
- Collaboration between session/stage/YouTube guitarist extraordinaire Shawn Tubbs and Revv found Dan Trudeau
- Exceptionally natural amp-like OD tones that are highly responsive to your playing
- 2-band drive EQ and tilt boost EQ for exceptional tone shaping capabilities
- 3-position tight switch to cut out the mud on higher boost settings
- Road-worthy construction, with a blue sparkle finish and custom Shawn Tubbs graphic
- Top-mounted 1/4-inch inputs to save room on your pedalboard
A brief history of Fender’s heavyweight champ amp—plus, how to make it float like a butterfly and sting like a bee.
“If an alien came to earth and wanted to hear an American guitar sound, I’d play him my Twin with a set of Jensens.”
I found this statement many years ago and it summarizes my feelings about the Twin Reverb, the flagship of Fender amps. So, let me share my insights about the biggest brother in the Fender family and discuss speakers, tube swaps, and how to unlock its secrets. My goal is to turn you all into educated fans of this legendary amp that has somewhat lost its place in the modern world. But first, a few facts.
Fender released the Twin Reverb as we know it today in 1963 as one of the first black-panel-era amps. It was a dual-channel combo with two 12" speakers, a diode rectifier, reverb, tremolo, and four 6L6GC tubes producing 85 watts. It was targeted at professionals and was the most powerful amp Fender had ever made. During the earlier tweed era, the Twin arrived as a 2x12" combo amp—first, a low-power 25-watt version with a single power tube pair; then, after 1958, a high power-version with four 6L6GC tubes and 80 watts.
“Speakers are like ice cream—everyone has their favorite.”
The blonde Tolex Twin came in 1960 and looked more like the black-panel classic that we know today, with separate normal and vibrato channels on the faceplate. Reverb and a diode rectifier were added to the black-panel Twin Reverb, which had all the features and the biggest iron that Fender could offer at the time. It was the first and only black-panel amp with a full tone stack on both channels, with bass, mid, treble, and a bright switch allowing you to dial in everything between a Dick Dale Strat surf tone and a mellow jazz sound for, say, a big box Gibson. The silver-panel Twin Reverb went through several changes from 1972 onwards, mostly in the power circuitry. There was a 100-watt and 135-watt silver-panel version with master volume. They aren’t very popular today but will work well as a cheap practice amp if you can find one in good condition.
The cons of the Twin Reverb are weight and loudness. Depending on the speakers, a Twin weighs 73 to 88 pounds. The 13-pound JBL D120F speakers that came in the original black-panel Twins were, in my opinion, too heavy for the amp, as were the four 10" JBLs in the Super Reverb. While these speakers are highly collectible, the weight of these ceramic JBLs will eventually tear the wooden cabinet apart. So, you cannot transport these amps around for regular touring.
My favorite vintage speakers for the Twin Reverb are the lighter Jensen C12N (7 pounds) or the Fender Oxford 12T6. The Oxfords sound surprisingly tight and good, and not as mushy as the Oxfords you find in other, low-powered Fender amps. The 1965 reissue black-panel Twin Reverb’s modern Jensen C12Ks sound unforgivingly stiff to my ears. Even if they improve after years of playing, I prefer to replace them with the lighter Jensen P12Q, which has a smaller voice coil and a vintage steel basket, or Warehouse Guitar Speakers’ brighter G12C/S. The G12C/S delivers a great authentic Fender tone at a reasonable weight (10 pounds) and price. But don’t solely trust my speaker advice. Speakers are like ice cream—everyone has their favorite. With the right speakers for your ears, a reissue Twin Reverb will deliver all the goods for you.
While other Fender amps typically break up at around 4 with a Strat, the Twin Reverb stays clean up to almost 6—and those clean notes are sharp as a knife’s edge and will hold up against heavy drummers and bass players. This is exactly what the amp is made for: being played un-miked in, say, a gospel band in a 300-seat church every Sunday, or on Friday nights in a cowboy bar in Bakersfield, circa ’63. It is designed to not break up. You therefore need to have your expectations set correctly—or be adept with pedals—to really appreciate the evil Twin.
A simple trick to lower the headroom is to disengage one of the speakers and pull the two inner or outer power tubes. You will, then, essentially, have a 1x12" 40-watt amp while still benefiting from the ambience of the large speaker cabinet. Other than that, there are no mods that I recommend with this amp. The Fender Twin Reverb is made for big occasions, and once you learn how to use it correctly, you’ll enjoy a very physical tone experience together with everyone else onstage—who will have no problem hearing this amp. I promise.
Day #4 continues with a great giveaway from Pigtronix! Enter for your chance to win a Gloamer.
This post contains affiliate links which help support Premier Guitar.
Gloamer is an all-analog, polyphonic amplitude synthesizer that alters the attack and decay time of any sound source without sacrificing the fidelity of the original tone. Its attack function provides a pick-triggered volume swell: a cinematic “slow gear” effect that is smooth and controllable with variable timing from extremely fast to very slow. The volume swell cycle can be reset at any moment by muting, allowing players to craft bowed string-like lines and chords with ease. Gloamer also features a powerful optical compressor that can add subtle punch or extreme sustain, helping to maintain a smooth volume swell effect even with very long attack times. A Volume knob controls loudness at the peak of the attack cycle, while a master Blend control allows players to layer an uncompressed clean sound in with the volume swell effect. Additionally, when activated, the Decay function causes notes to fade out once the attack cycle is complete. When the decay cycle is completed, an auto-reset function causes the attack to begin again immediately, as long as there is audio input. This allows you to create a wide range of undulating, asymmetrical tremolos at slower settings as well as pulsating stutter effects when using faster attack and decay times.