Bluegrass’ biggest ambassador continues expanding his sound with more pedals, more modeling, more Martins, and a dark-arts guitar. Plus, we find out whose ashes are inside his 1945 D-28.
It’d be hard to argue that anyone has changed their sound as much as Billy Strings has in the last 10 years. If you reference the pre-war traditional collaboration albums he first did with Don Julin (Rock of Ages and Fiddle Tune X), and his solo debut EP Billy Strings, and then witnessed one of his recent high-voltage shows, the songs and sounds are both worlds apart … yet familiarly rooted. He went from opening on the Bluegrass circuit to a crossover festival headliner that’s more Dead than Doc. He’s now filling arenas and amphitheaters as an evening-with performer that often crushes for over three hours by incorporating sideways jams and creative covers. However, each set still includes moments where the four musicians onstage stand around a single mic, just as their bluegrass forefathers did generations ago. So, even as he sends bluegrass into the cosmos, he keeps one foot planted in Appalachia.
Strings shared his thoughts on that juxtaposition during a 2019 PG interview: “Before writing my own music, I used to be boxed in by bluegrass, but enjoying other musical genres made me realize it’s a self-made, transparent box,” he said. “Music should be freeing, with no borders. I want to express myself emotionally with my guitar, however it pours out of me.”
When the Rig Rundown team traveled north to Indianapolis’ TCU Amphitheater at White River State Park, we didn’t know what to expect, but Strings’ full-monty setup did not disappoint. His rig still has delightful dreadnoughts, including some new old friends from Martin, but the many tricks rolled up his sleeve (or in his rack) allows this psychedelic sorcerer to cast spells over audiences all night long. Billy gave an hour to PG’s Perry Bean, where they covered electrifying acoustics, just whose ashes are in his 1945 Martin D-28, and how he continues coloring outside the traditional lines with stompboxes and modelers.
Brought to you by D’Addario XS Strings.Meet Frankenstein
This 2017 Preston Thompson DBA dreadnought, dubbed Frankenstein, is Strings’ No. 1 touring acoustic. Within his recent PG cover story with fellow bluegrass superstar Molly Tuttle, he elaborated on the guitar’s history: “It’s a Brazilian rosewood, spruce-top dreadnought. I’ve been playing it for several years and that’s the guitar that I play onstage. It’s been through hell. It’s been smashed and it’s been put back together. But it always sounds the best plugged in. I use a K&K pickup and I run it through a Grace Design BiX. Also, I have a ’45 Martin that I just put a pickup in. I just wanted to have an old one that I can play onstage. But every time, I go back to Old Faithful. I started calling that guitar Frankenstein—originally because I put all those different pickups in it, and the switch, and it’s got a Shure microphone installed on the inside that goes to my in-ears. And I had them make me another one just like it, and that’s The Bride.”
Additionally in the Rundown, Strings notes that this dread is the best plugged-in acoustic he has in his collection. Part of its voice is the K&K Sound Pure Pickup system that is underneath the bridge saddle, which he puts on all his acoustic-electric guitars. An added development since our 2019 Rundown was the incorporation of the K&K Sound Double Helix soundhole pickup that is hum-canceling and dual-coil. A Shure WB98H/C Cardioid Clip-on Instrument Microphone lives underneath the guitar’s top, giving a pure feed to FOH and his in-ear monitors. The switch on the guitar’s top (added by Scale Model Guitars’ Dave Johnson) engages the soundhole pickup when he wants to run his acoustics through his electric rig that hits pedals and a Kemper. All of Billy’s acoustic-electric instruments have this wiring.
Strings made sure to give a shout-out to D’Addario for their XS Phosphor Bronze strings (.013–.056), saying “Gotta have that medium gauge, gotta have that coated, ’cause we sweat like crazy. And they don’t break!” All his guitars take the medium set. He exclusively uses Elliott Capos and he plays BlueChip TP48 Speed Bevel Right Hand picks onstage. He landed on this particular pick because it’s what Bryan Sutton shreds with.
Busted
Frankenstein has not only gone through electrical updates, but it’s spent some time on Dave Johnson’s workbench getting repaired due to road burn.
Bride of Frankenstein
Four years ago, Strings toured with just one Thompson. His love and bond with Frankenstein, or Old Faithful, spawned into a pair of Preston Thompson DBAs. The Bride has the same specs and electrical DNA as its predecessor, but features a smoky charcoal sunburst finish. The inset photos show off subtle nods to the ’30s monster classic, including lightning bolts on the bridge and fretboard, while the headstock sports the iconic character originally played by Elsa Lanchester. He often uses it in a lower tuning for the title track off Home.
Jody Like a Melody
Yes, that’s a pickup selector on a 1945 Martin D-28, but before you vilify Billy for such blasphemy, understand this acoustic was in shambles when he acquired it. The bridge had been incorrectly moved, there were holes drilled into it near the bottom strap button, the binding was cracked, and the neck was so bowed it had a hump in the middle. Prior to Strings, it belonged to longtime Willie Nelson guitarist Jody Payne, who died in 2013. Billy had Nashville tech Dave Johnson bring it back to life with all the required pickups and mics. Strings addresses potential criticism by sharing that “it’s a 1945 Martin that is now being played onstage in front of thousands of people each night, and that makes me happy.” Another thing Billy had done was handled by the Martin Custom Shop where they refinished and reshaped the neck into a more familiar modified-V profile.
Ashes to Ashes
This next bit has to be one of the more astonishing (and touching) revelations uncovered during a Rundown. While Billy was out at the Hollywood Bowl for Willie Nelson’s 90th birthday bash in April, he showed the instrument to Willie’s right-hand man and harmonica player Mickey Raphael. He couldn’t believe it was Jody’s Martin, so he suggested to Strings that he should sprinkle in some of Payne’s ashes that have been on tour with the Family since 2013. He obliged, and, as you can see, Jody has been on tour with Billy ever since.
Billy addressed the conflicting feelings behind that during the Rundown, stating that, “who are we to make Jody’s spirit continue to be onstage every night, but Mickey was his good friend, and he thinks that’s what he would’ve wanted. It’s a beautiful guitar, I love this thing dearly, and they all mean something to me. They’re both my tools and my children.”
All the Bells and Whistles
This stunner is a custom D-45 from Martin that is equipped with all of Billy’s mics and pickups. Unplugged, it is snappy, booming, and full. As you’ll see in all the photos, anywhere they could dress it up, whether binding, inlays, headstock, tuners, neck joint, or rosette, they did it.
Pride and Joy
This 1940 Martin D-28 will never go near a drill press or Dremel tool. Strings uses it for moments onstage when the band (guitar, standup bass, banjo, and fiddle) goes back in time and huddle around a mic for throwback jams. This prewar icon rarely leaves Billy’s sight and travels with him to the hotel each night.
Excalibur
If you ever wondered where Billy was going to take his music and sound next, we have seen his future, and it resides in this 1980s Casio DG-20 Digital Guitar Synth. To take it from the toy aisle to the stage, Dave Johnson had to work on the saddle and rework the MIDI pickups for each string.
Billy Strings' Rack
Bluegrass purists were shaking their fists at the sky when Strings’ 2019 Rundown revealed he ran his flattop through a DI, 10 pedals, and a Fender Deluxe Reverb. They’ll need to screw their calvaria back on after seeing Billy’s setup now. It now includes a DI, 21 pedals, two expression pedals, a pair of volume pedals, a RJM Mastermind MIDI switcher, and a Kemper Profiler. The amp he landed on inside the modeler is a high-gain SLO-100, based on the coveted Soldano screamer. Utility components in the rack include a pair of RJM Effect Gizmos, a Radial SW4 Balanced Switcher, a RJM Mini Effect Gizmo, and a Radial JX44 Guitar Signal Manager and Switcher.
Billy Strings' Pedals
When Billy wants to turn his acoustic into space dust, he’s got a hearty squadron of willing vaporizers. Starting at the top left, he has a Voodoo Lab Sparkle Drive, Electro-Harmonix Micro POG, MXR Bass Envelope Filter, Source Audio EQ2, Boss DD-8 Digital Delay, Source Audio C4 Synth, and a Strymon Lex. A Strymon Ojai powers the pedals in this drawer. Moving to the right, he has a Jam Pedals Waterfall, Boss SY-1 Synthesizer, EHX Pitch Fork, Red Panda Raster, and an Eventide H9. All of these gizmos are powered by a Strymon Zuma. Going down to the bottom left, Strings assembles this drawer with a NativeAudio Pretty Bird Woman, a Chase Bliss Wombtone, Source Audio Nemesis, DigiTech Polara, Boss DC-2w Dimension C, and an EHX Freeze. Another Strymon Zuma powers all these creatures. The final drawer houses a Chase Bliss Audio Mood, Electro-Harmonix Intelligent Harmony Machine, and a Chase Bliss Audio Automatone MKII Preamp. Everything comes to life with a third Strymon Zuma.
Command Center
This is where Billy Strings tap dances each night—an incredible feat given how much he’s already doing with his hands. A RJM Mastermind GT MIDI switcher is the brains of the operation as it engages all his pedals and the Kemper’s SLO-100 profile. The Grace Design BiX gives FOH a clean, pure acoustic sound. A pair of Mission Engineering SP-1 expression pedals handle manipulating time-based and modulation effects. His two Ernie Ball 40th Anniversary Volume Pedals bring in Leslie effects and the Kemper. A TC Electronic Ditto Looper remains on the board since our last encounter. A Peterson StroboStompHD covers any on-the-fly tuning needs during his sets. Nashville’s XAct Tone Solutions built out this tonal headquarters and features several of their custom devices and routing boxes. A couple Strymon Zuma units power everything on the floor, while a duo of Radial boxes helps organize. (The SGI-44 talks to the rack-mounted JX44, and the JDI is a passive direct box designed to handle gobs of levels without any unwanted crunch.)
Just like guitarists, audiophiles are chasing sound. It may be a never-ending quest.
“What you got back home, little sister, to play your fuzzy warbles on? I bet you got, say, pitiful, portable picnic players. Come with uncle and hear all proper. Hear angel trumpets and devil trombones.”—Alexander DeLarge (Malcolm McDowell) in the film A Clockwork Orange.
We listen to recorded music for enjoyment and inspiration, but few of us expect recordings to rival the experience of live music. Most guitarists know that the average home sound system, let alone Bluetooth boomboxes, cannot reproduce the weight and depth equal to standing in a room with a full-blown concert guitar rig. Also, classical music lovers recognize that a home system won’t reproduce the visceral envelope of a live orchestra. Still, much like guitarists, audiophiles spend huge amounts of time and money chasing the ultimate “realistic” audio experience. I wonder if sometimes that’s misguided.
My exposure to the audio hobby came early, from my father’s influence. My dad grew up in the revolution of home electronics, and being an amateur musician, he wanted good reproduction of the recordings he cherished. This led him to stock our home with tube components and DIY electrostatic hybrid speakers that rivaled the size and output of vintage Fender 2x12s. I thought this was normal.
Later, I discovered a small shop in my hometown that specialized in “high end” audiophile gear. They had a policy: No sale is final until you are completely satisfied. I became an almost weekly visitor (and paying customer) and was allowed to take equipment home to audition, which was dangerous for a young man on a low budget. It was through this program I started to understand the ins and outs of building a cohesive system that met my taste. I began to pay much more attention to the nuances of audio reproduction. Some gear revealed a whole new level of accuracy when it came to acoustic or vocal performance, while lacking the kick-ass punch I desired of my rock albums. I was seeking reproduction that would gently caress the sounds on folk, classical, and jazz recordings, but could also slay when the going got heavy. This made me a bit of an odd bird to the guys at the audio shop, but they wanted to please. With their guidance I assembled some decent systems over time, but through the decades, I lost interest in the chase.
Recently, I’ve begun perusing online audiophile boards and they seem oddly familiar, with tube versus solid-state discussions that might feel at home to guitarists—except the prices are now beyond what I’d imagined. For the most part, they mirror the exchanges we see on guitar boards minus the potty-mouth language. Enthusiasts exchange information and opinions (mostly) on what gear presents the widest soundstage or most detailed high-frequency delivery, all in flowery language usually reserved for fine wines.
Speaking of whining, you’ll rethink your idea of expensive cables when you hear folks comparing 18", $1,700 interconnects for their DACs. Some of the systems I’ve seen are more costly than an entire guitar, amplifier, and studio gear collection by a serious margin. Mostly, the banter is cordial and avoids the humble-bragging that might go along with the purchase of a $10,000 set of PAF humbuckers. Still, I have a lack of insight into what exactly most are trying to accomplish.
If you’ve ever worked in a big-time studio, you know that the soundscape blasting out of huge monitors is not what most of us have in our homes. My experience rewiring pro-studio patchbays is that less emphasis is placed on oxygen-free, silver-plated, directional cables than the room treatment. I’ve found myself wondering if the people on those audio boards—who have spent many tens or even hundreds of thousands of dollars on their home systems—have ever been in a studio control room listening to music as loud as a 28,000 horsepower traffic jam of NASCAR racers. That might be an eye-opener.
One of my takeaways is that even though music recording began as an attempt to reproduce what actually happens in a room, it hasn’t been just that for a long time. With all our effects and sonic wizardry on display, recording is like playing an instrument itself, and much more complex. This is not a new revelation to Beatles fans.
What amazes me is that both audiophiles and guitar fanatics pursue the sounds we hear on recordings for differing reasons and with subjective results. It’s a feedback-loop game, where we chase sounds mostly exclusive to the studio. So, how do we determine if our playback is accurate? Will we ever be satisfied enough to call the sale final?
I’m not convinced, but just the same, I’ll continue my own search for the holy grail of affordable, kick-ass sound that still loves a folk guitar
Kirk Hammett has partnered with Gibson Publishing to release The Collection: Kirk Hammett, a premium hardcover coffee-table photo book where Kirk tells the stories behind his rare and collectible instruments.
“I am thrilled to announce the launch of The Collection: Kirk Hammett. I’ve worked diligently on this curated collection of vintage and modern guitars for the book. I feel the book captures the rich history and artistry behind each of these unique and rare instruments. Every picture tells a story and thanks to Ross Halfin and his exceptional photography, every picture in this book is worth a million words! This book could not be possible without the help of Gibson, so I’d like to thank them for making my passion for Greeny, and guitars a reality. I hope all of you enjoy this journey as much as I did.”
“It’s exciting the time has come to release The Collection: Kirk Hammett by Gibson,” adds Cesar Gueikian, President and CEO of Gibson. “We have been working on this project with Kirk for years now, and I had the opportunity to work closely with Kirk on the composition of the collection for the book. It was a thrill to put this together and it took a village to get it done! I hope everyone appreciates the work that went into this book and enjoys every story behind the guitars.”
The Collection: Kirk Hammett, Custom Edition is limited to just 300 numbered copies signed by KIRK HAMMETT and comes in a huge 19 x 14.5” (490 x 370mm) presentation box featuring custom artwork and an outstanding case candy package. In addition to the large-format 17 x 12” (432 x 310mm) hardcover version of the book with a stunning lenticular cover, the boxset includes a frameable 16 x 11.6” (407 x 295mm) art print of a Ross Halfin portrait of KIRK HAMMETT signed by both Halfin and the Metallica guitarist. Other case candy includes an Axe Heaven miniature replica of Hammett’s 1979 Gibson Flying V with case and stand, an exclusive pick tin complete with six Dunlop® Kirk Hammett signature Jazz III guitar picks, and a Gibson Publishing Certificate of Authenticity.
Explore The Collection: Kirk Hammett book HERE.
Here’s Chris Martin surrounded by a group of guitars created to commemorate his family’s 192-year history.
The home organ once ruled the world, only to go extinct. Is the acoustic guitar next?
When I was growing up, my Aunt Kate had a home organ in her living room. Back then, home organs were everywhere. They were sold at malls across America, and were a staple of post-WWII households. Brands like Lowrey, Magnus, and Hammond dominated the market. Lowrey, a division of Norlin (which eventually acquired Gibson), was especially massive. In fact, in a year where Gibson generated $19 million in revenue, Lowrey pulled in a staggering $100 million.
But like all booms, the home organ’s success was temporary. By the 1980s, it had gone bust. A huge contributing factor was the entrance of Casio: a more affordable, portable alternative that rendered the home organ obsolete.
Thankfully, the acoustic guitar has always had portability on its side. I’ve witnessed three major acoustic-guitar booms in my lifetime: the folk and folk-rock explosion of the late ’50s through the late ’70s, the MTV Unplugged resurgence, and most recently, the COVID-era surge.
The ’80s, however, were a tough time for acoustic guitar builders. That decade belonged to pointy electric guitars and hair metal. But the acoustic guitar came back. And unlike the home organ, it has not only endured, but thrived.
My great-grandfather capitalized on the demand for mandolins in the early part of the 20th century. We also tried to make and sell banjos. In addition to that, we made archtops, and although they weren’t as popular as some other brands, we did borrow the 14-fret neck.
While we were making 12-fret guitars with steel strings (the real benefit of that era was a dramatic improvement in the quality of steel strings), we discovered that many players wanted more access to the body and a slimmer profile. Starting with a 000-size guitar, we quickly converted many of our models to the new modern neck design, most notably our dreadnought model. The timing was right, as the dreadnought became the go-to guitar for country music. The steel-string flattop would lend itself to a fantastic melding of styles and types of music from around the world (and around the corner), becoming the driving voice of not just country, but also folk and many other genres.
Baby boomers (myself included) grew up with the sound of the acoustic guitar, and playing the music of our youth remains an essential part of any enthusiast’s repertoire. Our generation is not only large but also living longer, thanks to modern medicine and healthier lifestyles. Many of us have accumulated wealth, and for those of us in the business of making and selling guitars, that’s good news.
I mean no disrespect when I say, “Thank goodness I wasn’t born into the world’s most famous accordion-making family.” Accordions had their day, just as the home organ once did. Interestingly, accordions still have a niche following, whereas the home organ is now a historical artifact. While home organs were, for a time, all the rage, I doubt that even at the peak of their popularity anyone owned more than one. Quite a different situation when it comes to guitars and guitar collecting.
I do wish I could share with my ancestors how popular the guitar continues to be.
Every so often, someone writes an article with a headline like, “Is the Guitar Dead?” My answer is simple: no.
As long as we boomers—and everybody else—keep playing.
The collection includes Cobalt strings with a Paradigm Core, Tim Henson Signature Classical Strings, and the Tim Henson Signature FretWrap by Gruv Gear.
Engineered for maximum output, clarity, and durability, these strings feature:
- Cobalt with a Paradigm Core (not RPS) for added durability
- Nano-treated for maximum lifespan and corrosion resistance
- Gauges 9.5, 12, 16, 26, 36, 46 (Turbo Slinky set)
- Available individually or as part of the Tim Henson Signature Bundle
Tim Henson Signature Classical Strings
Crafted for dynamic, percussive tonality, these strings pair fluorocarbon trebles with silver-plated copper basses to deliver exceptional response and clarity.
- Gauges: 24, 27, 33, 30, 36, 42
- Available individually or as part of the Tim Henson Signature Bundle
Tim Henson Signature FretWrap by Gruv Gear
An essential string-dampening tool, the Tim Henson Signature FretWrap is designed for cleaner playing by eliminating unwanted overtones and sympathetic vibrations.
- Features Tim Henson’s custom ‘Cherub Logo’ design
- Size Small, fits 4-string basses, 6-string electric/acoustic guitars, and ukuleles
- Ideal for live performance and studio recording
- Ernie Ball collaboration with Gruv Gear
- Available individually or as part of the Tim Henson Signature Bundle
The Ernie Ball Tim Henson Accessory Bundle Kit
For players who want the complete Tim Henson experience, the Ernie Ball Tim HensonSignature Bundle Kit includes:
- Tim Henson Signature Electric Strings (9.5-46)
- Tim Henson Signature Classical Strings (Medium Tension)
- Tim Henson Signature FretWrap by Gruv Gear (Small)
- Tim Henson Signature Cable (Exclusive 10ft white dual-conductor cable, only available in the bundle)
The Tim Henson Signature String & Accessory Collection is available starting today, March 19, 2025, at authorized Ernie Ball dealers worldwide.
For more information, please visit ernieball.com.