Factory Tour: Martin

With roots that date back to the early 19th century, the multi-generational Martin Guitars—which also employs a host of multi-generational builders—draws on their long history to combine the traditional handmade methods of their early days with modern 21st century computerized optimization, all of which are on display throughout this thorough, detailed factory tour that makes every stop along the assembly process.

Instrument design manager Rameen Shayegan leads Bohlinger through the factory, where they see workers, each specialized in various parts of the creation process, building the company’s instruments. Their first stop starts at the very beginning of the manufacturing process, at the raw wood acclimation department and the sawmill, and we get to see firsthand where guitars begin to take shape and necks are rough cut. Next, we see how backs are made and are introduced to the clamp carrier machine, where they’re glued up and set to dry. Braces are then carved and installed onto the guitars’ tops—which we see being laser cut to precision—and backs. Once the sides are bent, a rim is applied, glued, and a guitar body is made. Then, binding is installed, necks meet the bodies, frets meet fretboards, guitars are finished, and we meet the imposing and futuristic polishing robot, which makes that finish shine.

By the time the tour winds down in the setup department, we witness the final steps of the Martin creation process, where guitar get the Plek-machine treatment, get strung up for the very first time, and electronics are installed. Quality control doesn’t stop until after every instrument spends time in four-day hold and gets a thorough reinspection before shipping off to its next destination.