The Italian-Australian may travel light—a single F Bass VF4—but he still delivers unlimited funky-fresh low-end thunder from Down Under that gets the women swooning, the men fuming, and everyone grooving like it’s Studio 54.
There’s comical bands (Gwar), there’s parody bands (Steel Panther), and there’s clever combinations of both (Mac Sabbath). The Italian-Australian Donny Benét is none of those and all of those at the same time. His polished compositions, breezy rhythms, and funky fretwork are no laughing matter. Instead, Donny is the joke … or is he?
“I thought, “What would I think if I saw some bald, chubby dude shredding on bass and fretless?’ I’d be like ‘hell yeah,’ so I might as well be the guy that’ll do it,” explains Benét.
Donny (born Ben Waples) is from a musical family in Sydney, Australia. He grew up performing on several instruments, became classically trained on piano, and earned a master’s degree in double bass. The fluent musician started a career as a jazz bassist for various artists in Sydney, and eventually shifted to an experimental jazz/electronica band, Triosk. While both endeavors were challenging and rewarding, Ben wasn’t having fun. After Triosk disbanded, Waples continued writing and recording on his own. It started with Cubase and a Line 6 DL4 that gave him 48-second loops. He started making “Donny Benét” joke songs. His friends and family continued encouraging him to make more, and before he knew it he had enough material to create Don’t Hold Back. (To this day he still records all the parts except saxophone, played by his brother Daniel Waples.) And through his passion for creating music combined with his love for ’70s funk and R&B—he mentions his introduction to electric bass was via a VHS tape featuring Larry Graham, Bernard Edwards, and Nile Rodgers—infused with the aesthetic and aura of Itala-disco performers, Donny Benét was born.
“I’m a seriously trained jazz musician in a prior life, and I try not to take myself too seriously now, but I’m deadly serious about taking the piss out of myself. I like humor, but I definitely don’t make joke music,” states Benét.
Since 2011, he’s released six albums, all showing an evolution and refinement of the Don. Each release has revealed a new part of Benét's infinite swagger, blending influences of Prince, Alan Vega, Lou Reed, Tom Jones, and, of course, James Jamerson, “Duck” Dunn, and the funk forefathers. Yes, Donny B can sweep you off your feet, but that’s because one thing reigns supreme—the music.
“With Donny I’ve always taken the approach of ‘what would I listen to?’ I started there and I continue to follow it. If no one likes it, that’s fine, so long as I like it. If someone else likes it, even better,” says Benét.
Before his headlining gig at Nashville’s Basement East, Donny B welcomed PG’s Chris Kies onstage to chat about his minimal-but-musical setup. Benét explains the origins of “Donny,” covers his custom Furlanetto 4-string and why he calls it “probably the best live instrument I got,” and discusses scoring tons of gear when the exchange rate presents deals.
Brought to you by D’Addario Pedalboard Essentials: & D’Addario"It's Probably the Best Live Instrument I Got."
Benét has been a longtime fan of Steve Swallow. He recalled seeing the bass legend perform with an “F” bass and assumed it was Fodera. He later learned it stood for F Bass, founded by George Furlanetto in 1978. During a tour that was taking him from Toronto to Chicago, Donny B swung by F Bass HQ in Hamilton, Ontario, to check out their instruments. He left the shop without a new companion, but later connected with current owner Marcel Furlanetto and spec’d out this beauty that he stylized after “an ’80s high-end custom bass.” So, he had to have the two-tone body decked out with gold hardware (with a Hipshot D Tuner), a 5-piece neck with stringers, an ebony fretboard, Aguilar AG 4 P/J-HC set pickups, and a custom F Bass 9V preamp with bass, mid, and treble boost. Though the custom F has a P-J setup, Benét notes that during the U.S. tour he’s been playing it more as a P, and because of its versatile setup he can approximate many of the basses in his collection, depending on pickup selection and EQ. He claims that every note is even and it’s a FOH engineer’s dream to mix because it’s so clear and present. The F uses La Bella RX-S4D Rx Stainless Roundwound Bass strings (.045–.105).
Class D for B
Benét has toured the last decade and seen a growing (or shrinking) trend among bassists — smaller setups. He’s onboard with the travel-friendly rigs and has been using a Bergantino Forté HP 2 that has 1200W on tap and weighs just over 6 pounds. Donny mentions he gets most of the bass he needs for monitoring through his wedge, so he could’ve taken a 1x12, but the kind folks at Bergantino sent him through North America using a NXT410-C.
Donny Benét Pedalboard
Most of Donny’s “effects” come from his VF4’s EQ and playing style or attack, but when he needs to intensify or widen his core bass sound, he’ll tap on either the Boss OC-2 Octave or the DC-2W Waza Craft Dimension C chorus. A Boss TU-3 Chromatic Tuner keeps his Furlanetto in check. And everything rides on a Pedaltrain Metro 16 board.
Keymaster
He’s toured with a Moog Little Phatty (bad idea) and records a lot with a Sequential Prophet-6, but for these spring shows he brought over the Korg Monologue analog synthesizer. He’s used them all over the world, and after each run he sings their praises for being durable, dependable, and damn cheap. The best part is that it fits in his carry-on case.
Shop Donny Benét's Rig
Aguilar AG 4 P/J-HC Set Pickups
Boss DC-2W Waza Craft Dimension C
Boss TU-3 Chromatic Tuner
Pedaltrain Metro 16 Pedalboard
Korg Monologue Analog Synthesizer
La Bella RX-S4D Rx Stainless Roundwound Bass Strings (.045–.105)
- Digging Deeper: Developing a Funk-Guitar Orchestra ›
- Downstroke Funk ›
- How to Turn Fender Guitar Amps into Bass Rigs ›
- Behind the Scenes: Donny B's Minimal Setup & Origins - Premier Guitar ›
A satin finish with serious style. Join PG contributor Tom Butwin as he dives into the PRS Standard 24 Satin—a guitar that blends classic PRS craftsmanship with modern versatility. From its D-MO pickups to its fast-playing neck, this one’s a must-see.
PRS Standard 24 Satin Electric Guitar - Satin Red Apple Metallic
Standard 24 Satin, Red App MetIntroducing the new Firebird Platypus, a tribute to the rare transitional models of 1965.
In early 1965, the original Firebird design transitioned through several different iterations. One of the significant transitions that occurred flipped the headstock to the Non-Reverse shape. Unlike the original Reverse Firebird headstock design, which featured a two-layered headstock with a holly veneer, the new headstock was flat, like the bill of a platypus.
Mahogany body and glued-in mahogany neck
The Firebird Platypus has a mahogany body with the appearance of a traditional neck-through Reverse Firebird body for that classic Reverse Firebird appearance, while the neck of the Firebird Platypus uses glued-in, set neck construction like the Les Paul and SG and delivers outstanding sustain and resonance.
Platypus transitional headstock design
The headstock features the flat, transitional style “platypus” design that was found only on rare models from the 1965 transitional period when the Firebird was gradually switching over from the features found on the original models that were released in 1963 to the features that were used for the later Non-Reverse Firebird models.
Firebird humbucker pickups
It’s outfitted with two Firebird humbucker pickups. These pickups are equipped with Alnico 5 magnets and have a unique sound that is not quite like any other humbucking pickup, with unmatched clarity, chime, and bite. They sound great for both clean and overdriven tones.
Exclusive Cherry Sunburst finish
This exclusive Cherry Sunburst finish is available only on Gibson.com and at the Gibson Garage.
For more information, please visit gibson.com.
The exquisite BilT Brothers collaborative guitar: a Frank Brothers Ultra Light in BilT eggplant sparkleburst with Arcane 3x3 Gold Foil Humbuckers and loaded with a Caroline Custom Cannonball Distortion.
This forward-thinking custom guitar commissioned by our columnist makes a special case for partnership in the guitar building community.
Owning a guitar shop, your brain is full of to-do lists, questions, and plenty of compulsive thoughts over details. And when you run a shop that specializes in custom builds that you spec out from boutique companies, the ideas for these guitars often come at the most random times of day (and night). While I don’t subscribe to the notion of fate, the following makes a case for its existence.
It was like any other random day at work: We had customers coming in, items shipping out, services on the bench. I was simultaneously working on a pedalboard for a customer and making plans with some vendors. I was on the phone with Brandon Darner of BilT Guitars when DHL dropped off our latest Frank Brothers guitar. Now, I’m never shy about talking up builds from any of our vendors. Spec’ing guitars for our shop, seeing their execution exceed my expectations, and then getting it into the hands of its new owner is one of my absolute favorite parts of my job. So, naturally I mentioned that we just got a new Frank Brothers in. Brandon told me how much he loved their stuff—sort of a “game recognizing game” kind of thing.
After we unboxed the guitar, I called Tim Frank to let him know how we continue to be impressed with their work and how much we loved the new arrival. I also mentioned Brandon had some very nice things to say about their work. Tim’s response was something like, “Oh wow! That’s really cool. Their stuff is amazing and we have a lot of respect for those guys.” At first, I thought he was just being polite, but I’ve gotten to know him pretty well. I knew that the compliment and sentiment was genuine and past the point of his wonderful Canadian pleasantness. One thing led to another, and I started a group text. Very quickly, they became friends. In fact, Brandon even ordered a Frank Brothers shortly after the introduction.
The Frank Brothers and BilT team, left to right: Tim Frank, Tim Thelen (BilT), Nick Frank, and Brandon Darner (BilT).
My last call of the day was to Philippe Herndon from Caroline Guitar Company. As we talked, he was glowing about the pedal building community and how friendly and collaborative it is, and obvious questions popped into my head: “Why aren’t guitar companies like that?” “Why can’t we do a collab guitar?”
Long story extremely short, with tons of excitement, I got Brandon and Tim on the phone and proposed the idea of doing a guitar together. Without hesitation, the response from both was “Hell yeah, let’s do it!” and it was time for us to spec it. We decided on a Frank Brothers Ultra Light. BilT would apply their world-class fit/finish as well as their signature effects treatment. I picked my favorite finish in the BilT repertoire called eggplant sparkleburst, selected Arcane 3x3 Gold Foil Humbuckers, and tapped Philippe on the shoulder to ask if he had any Custom Cannonball Distortions—the first pedal I bought from Caroline in 2013—that he could provide for the build, to which he happily obliged.
A year or so later, the BilT Brothers was born. Of course, it is exceptional beyond words and is a true testament to the results of these incredible companies working together to produce something truly remarkable. We decided, with custom shirts and all, to proudly debut our creation at Fretboard Summit in Chicago. The reaction from everyone exceeded our expectations and showed me that the level of mutual respect and admiration in this business can lead to phenomenal results.
This project has opened a lot of doors that I’m not sure anyone knew existed. For me, the most exciting part of all of this is the fact that, like the smaller pedal companies, there is an actual community here filled with like-minded, pure enthusiasts who also happen to be master craftsmen—and who truly geek out over each other’s work.
Never was this more evident than at the Wood Wire Volts show this January, where not only did the BilT and Frank Brothers crews travel and stay together, they were also often in deep chats with fellow luminaries Sacha Dunable (Dunable Guitars) and Carlos Lopez (Castedosa Guitars), discussing the trade, the work, and ideas for the future. If the vibe is any indicator, we can safely assume that while the BilT Brothers was, by all accounts, the first ever collab guitar of its kind, it will not be the last.
This entire experience is reminiscent of the DIY community ethos that I’ve clung to and has inspired me for most of my life. There is a cliché about the journey being greater than the destination, and while the destination in this case is one of the finest guitars I’ve ever laid my hands on, I’d have to say it holds true
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beauty–both in sound and appearance–of the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.