A pair of overdrives with vintage aesthetics and tones to match.
Rugged build. Sweet saturation.
Can sound ragged around the edges at high gain.
$149
Warm Audio Warmdrive
warmaudio.com
Many recording enthusiasts know Warm Audio for their well-regarded and affordable takes on otherwise unattainable classic studio microphones, preamps, and processors. Most of these imitate the handsome aesthetics of those units along with their functionality, which adds to the allure. Warm Audio ventured into pedal building a few years back with lovingly rendered versions of the Roland Jet Phaser and Foxx Tone Machine. This time out, though, they’ve taken on two less obscure pedals, the Lovepedal/Hermida Zendrive and Klon Centaur, in the form of the Warmdrive and Centavo, respectively.
Some of the language Warm Audio uses to describe the Warmdrive and Centavo pedals—like “accurate recreation” and “true reproduction”—is bound to raise eyebrows among circuit snobs. Yet both pedals are ruggedly built. Plenty of attention is paid to the cosmetic details. Both circuits are put together using sturdy through-hole boards and populated with reputable components. And there’s a general air of quality about them, both inside and out, that promises real road reliability which should squash a lot of the chagrin from naysayers.
In some ways, the company’s decision to build clones of two pedals that have been copied many times over is a curious one. But Warm Audio’s attention to aesthetic details will no doubt entice cost-conscious enthusiasts chasing both the sound and visual cachet attached to these historically important effects.
Warmdrive
The original Zendrive was created by Alfonso Hermida in the mid ’00s as an attempt to re-create Robben Ford’s hallowed Dumble-driven lead tones in an overdrive pedal. That remains a lofty goal. But many players agree that Hermida succeeded just about as well as one could. The results were good enough for Ford himself, who frequently uses a Zendrive with non-Dumble amps (often a Fender Twin Reverb).
The Warmdrive control layout is identical to that of the Zendrive, and includes gain, volume, tone, and voice knobs. The latter is a versatile control that moves the pedal’s overall character between dark and bright tones in a more expansive way than you experience using a typical high- or low-pass-filter-based tone knob. Signal-sweetening gubbins include 1N34A germanium diodes, 2N7000 MOSFETs, and an NE5532 op-amp. The steel enclosure and true-bypass switch feel more than solid enough to survive repeated stomping. The cosmetics, in typical Warm Audio fashion, imitate the original.
Dum Dum Drive
With a Gibson Les Paul, Fender Telecaster, ’66 Fender Princeton combo, and 65amps London head and 2x12 cab, the Warmdrive was a fast track to the kind of Dumble-y, creamy saturation that’s kept players drooling through the decades. I suspect even cynics will be smiling when they slide into sustain-driven fusion improvs.
The Warmdrive is a thick, chewy overdrive at heart, but moves easily from smooth and warm to crisp and crackling, depending on where you set the voice knob. And there’s lots of room to fine-tune further using the tone control. There’s also plenty of range in the gain and level controls, which makes the pedal capable of much more than full-on lead tones. It’s a surprisingly good low-gain drive as a result. Even so, the real treats are in the near pedal-to-the-metal settings. Setting the gain around 2 o’clock, the volume around 11 o’clock, and tone and voice pretty close to noon makes a sound I could truly get lost in. I didn’t think about its Dumble-imitating origins, or how it sounded compared to a Dumble, or for that matter a Zendrive. I just knew it sounded great. If you want to feel like Robben Ford for a few minutes, this is an easy way to get there.
Centavo
Cloning a pedal that’s unavailable in its original form (and prohibitively costly when you find one) is generally a service to the guitar community. In the case of the Klon, however, there are enough klones, and hype around them, that the addition of yet another will probably induce a few eye rolls. That said, the ongoing, often raging, debate over which klone clones the Klon best, indicates there’s still room for anyone that wants to take a shot at building a better, more accurate one.
To date, only one klone I know of comes in an accurate die-cast enclosure like the box that houses the Centavo: the well-regarded Centura from Ceriatone Amplification of Malaysia. So, Warm Audio’s insistence on vintage accuracy will be a boon for players seeking the original’s handsome look at a fair price. The 6.75" x 5" x 2.25" dimensions, though, mean itmight be less appealing to those eager to conserve real-estate on crowded boards.
Elsewhere, Warm Audio chased authenticity pretty relentlessly. Like the original, the Centavo uses buffered bypass, TL072 op-amps, and a charge-pump voltage regulator. The oxblood pointer knobs for gain, treble, and output are another nice vintage touch that looks great. Warm Audio did take one very practical liberty with original design in the form of a MOD switch, which is situated between the input and output on the pedal’s crown and extends the circuit’s low-end response.
Chasing Mythical Beasts
Tested via the same guitars and amps used for the Warmdrive evaluation, the Centavo provides many reminders of why the original Klon became so beloved in the first place. For me, at least, the tastiest function, just as on the original, is when it’s used as a near-clean or just slightly dirty boost. Even at unity gain it sounds excellent, which is apparent just as soon as you turn it off. If the Centavo had a photo filter equivalent, it would be one that illuminates everything with golden-hour light. Everything you hear is essentially the same—just somehow more magical.
When you wind up the gain for a more lead/overdrive setting, the Centavo doesn’t disappoint. It can sound a touch furry and woofy at times and is occasionally a little ragged around the edges. Yet it still adds loads of character to lead lines. Though purists might be bummed by its inclusion, I found the low-end lift from the MOD switch useful—particularly at lower gain settings, where it fills out the bottom end especially well. In general, though, the MOD switch’s effect on the output is subtle and doesn’t overpower the Centavo’s basic voice. If there are any noteworthy audible differences between the Centavo and an original Klon, it might be the Centavo’s lack of midrange glimmer, a quality that, for me, distinguishes the Klon Centaur. Maybe that’s why originals are $5,000 these days. But, man, that’s a lot of money for a little extra midrange!
The Verdict
Both of these new pedals from Warm Audio are well-built and carefully executed renditions of their inspirations and deliver very close approximations of the target sounds. If they aren’t dead on, and few clones ever are, they certainly get very close for extremely reasonable money, both yielding dynamic overdrive regardless of price. That they do so much to deliver the visual appeal of the originals only sweetens the deal.
Better Than the Klon & Zendrive?! Warm Audio Centavo & Warmdrive Demos | First Look
- Warm Audio Introduces the Foxy Tone Box and Jet Phaser ›
- First Look: Warm Audio Jet Phaser ›
- Warm Audio Jet Phaser Review ›
- Warm Audio Launches Two New Guitar Pedals - Premier Guitar ›
- Warm Audio ODD and Mutation Phasor Demos | PG Plays - Premier Guitar ›
- Warm Audio RingerBringer and Warm Bender Demo ›
- Warm Audio WA-C1 Chorus Vibrato & Pedal76 Release - Premier Guitar ›
- Warm Audio Pedal76 & WA-C1 Pedal Demos with Tom Butwin - Premier Guitar ›
The pedals keep coming! Enter Stompboxtober Day 28 for your chance to win today’s featured pedal from Line 6!
Line 6 Hx One Stereo Multi-Effects Pedal
The Line 6 HX One is a powerful stereo effect pedal with intuitive controls that fits onto any pedalboard. Select one of 250+ effects taken from the acclaimed HX family processors and easily adjust the parameters displayed on the OLED screen using the three corresponding knobs. You can also automate parameter changes via the unique Flux controller and trigger them with the Tap/Flux footswitch. Connect an optional expression pedal or two external footswitches for additional control (all sold separately). . HX One also provides adjustable input impedance with a choice of True Bypass or buffered DSP Bypass, MIDI In and Out/Thru connectors, 128 Presets or a USB-C port for firmware updates and use with the HX One Preset Librarian application. HX One may be powered using the included 9V power supply or most third-party power supplies, making it easy to add to your pedalboard.250+ effects taken from the HX family processors. Intuitive controls make selecting and editing effects easy. Flux Controller for automating parameter changes . Adjustable input impedance to match your instrument . Connect an optional expression pedal or two external footswitches (sold separately). MIDI In, Out/Thru connectors (receives PC and CC messages). Stereo I/O with choice of True Bypass or buffered DSP Bypass. 128 preset slots. USB-C port for firmware updates and use with HX One Preset Librarian . 9V power supply included.PG contributor Tom Butwin details RAB Audio GSRS – a studio racking system purpose-built for guitarists looking to declutter, customize, and elevate their creative space. Whether you’re a pedal enthusiast or amp collector, RAB Audio has a solution for your recording setup.
RAB Audio ProRak SRS1 Guitar Studio Racking System
3 adj amp head decks, laminated plywood, Blk TrimHandcrafted in the USA, the JEL-50 features 50 watts of all-tube power, two channels, and a transparent effects loop. The JEL-212 Cab is loaded with Celestion Creamback speakers.
Jake E. Lee ranks high on the shortlist of influential gunslinger guitarists that emerged as the heroes of a new generation in the early ‘80s. Best known for the burning guitar work and innovative songwriting, Lee contributed to two of Ozzy Osbourne's most revered albums, 1983’s Bark at the Moon and 1986’s Ultimate Sin.
With Ozzy, his post-Ozzy band, Badlands and most recently, with his own group, Red Dragon Cartel, Lee’s playing embraced the athleticism of the ‘80s while remaining firmly rooted in the hard rock fundamentals of the ‘70s. Jake’s tonal choices provide the evolutionary glue between the sonics of those two great eras. Jake E Lee and Dave Friedman combined their legendary ears and talents to create the new Friedman JEL-50, a signature amplifier that offers Lee’s ultimate tones in a boutique hand-wired package.
In Lee’s own words, “this amp puts the two specific tones I use to create my sound in one head: The sweetness and warmth of a classic Plexi and the more aggressive slant of the master volume amps of the ‘80s -- all tweaked to my taste. Dave has an innate understanding of where I’m coming from as a player and we’re alike in the way we hear tones. Dave doesn’t hear things as a technician, he hears things like a musician, and that made him really easy to work with. I grew up in the ‘70s and those muscular, articulate rock tones were the tones I always sought, but I made a name for myself in the ‘80s when you needed a little more aggression and a little more scream. I’ve always tried to retain a little of that ‘70s heart and I still do, and that’s what this amp does -- though it’s got plenty more on tap if you need it!”
The JEL-50 was specifically designed to take pedals well especially boosts, ODs, phasers, flangers, tremolos, and wahs. The ultra-transparent buffered, series effects loop takes time-based effects pedals and rack units equally well. This is the exact same FX loop Friedman uses on all its amplifiers including the legendary BE-100. The head cabinet features beautiful red tolex, white piping and solid Baltic Birch construction.
SPECIFICATIONS
- 50-Watt all-tube head
- Two channels
- Handwired in the USA
- Custom USA made transformers
- 2 x EL34 power tubes
- 3 x 12AX7 preamp tubes
- JEL channel - Gain, Master, 3-way Bright switch
- JEL Channel Hi/Lo (Push pull gain switch)
- Plexi channel - Gain, Volume, 3 way Bright Switch
- EQ- Bass, Middle, Treble shared with Ch1 and CH2
- Ultra-transparent series effects loop
- Thump knob - ( Rear ) Varies lowered response of the amps power section
- Presence - ( Rear) Varies high end content of the amps power section
- Single button foot switch for channel selections
- 4, 8 and 16 ohm Impedance jacks
- Limited Lifetime Warranty
- Dimensions: 8.75″ (D) x 24″ (W) x 10″ (H)
- Weight: 33.5 lbs
2x12” Celestion Creamback Loaded Extension Cab
The Friedman JEL 2x12” is a rear ported closed-back extension cabinet which utilizes tongue and groove Baltic Birch construction to deliver the bass, mid response and great sound you would expect from a Friedman cab. The JEL 212 Cab features red tolex, white piping and black grille cloth, designed to cosmetically match the Friedman Signature Jake E Lee heads.
At the heart of the cab is a Celestion G12M-65 Creamback 16 Ohm speaker. The G12M Creamback is perhaps the definitive vintage Celestion ceramic magnet guitar speaker. Developed in the mid-sixties, it was quickly adopted by players like Hendrix, Beck and Page, who typified the louder and more aggressive blues-rock playing styles that came to characterize that era. The higher power handling G12M-65 Creamback used in the JEL 1x12 produces that familiar woody tone, making it ideally suited when both vintage and modern tones are desired. The increased power handling brings with-it low-end grunt complementing the warm and vocal mid-range, crunchy upper mids and sweet, refined highs.
As with all Friedman cabinets, oversized 12-gauge speaker wire is soldered between the speaker and terminal, assuring you capture every ounce of valuable tone. This compact monster not only excels in the studio, but the perfect compliment to your stage rig. The Friedman JEL-212 Cab is handcrafted with pride in the U.S.A. and designed to withstand the rigors of the road.
SPECIFICATIONS
- Hand crafted in USA
- Cosmetics to match the Jake E Lee Signature Heads
- 2 x Celestion G12M-65 12" Creamback Speakers
- Nominal impedance - 8 Ohms
- Closed back -rear ported cabinet design
- Limited lifetime warranty
- Dimensions: 12" (D) x 30" (W) x 20.75" (H)
- Weight: 58 lbs.
The Friedman JEL-50 Head carries a street price of $2999.99 and the JEL-212 Cabinet carries a street price of $999.99.
For more information, please visit friedmanamplification.com
Friedman Amplification - All new Jake E Lee 50-Watt Head featuring Jordan Ziff - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Friedman JEL-50 Jake E Lee Signature 50-watt Tube Head and 2x12" Cabinet
Jake E Lee 50W Tube Head 212 StkThe Boss GX-10 Multi-FX Processor offers 23 guitar amps, nine bass amps, and 170 effects for versatile sound creation.
Boss announces the GX-10, a powerful new amp and effects processor for guitar and bass. Equipped with the core sound engine and color touch display from the acclaimed GX-100 released in 2022, the GX-10 offers players the same inspiring experience in an even more portable footprint. Adding in multi-mode footswitches, an integrated expression pedal, and USB audio connectivity, the GX-10 seamlessly transitions from nightly stage performing to desktop recording, song creation, and daily practice sessions.
The GX-10 delivers a universe of ultra-responsive tones in a travel-ready size. There are 23 guitar amps and nine bass amps to choose from, including high-gain X-Ultra, X-Optima, and X-Titan types crafted with the latest BOSS modeling technologies. Players can color sounds with 170 different effects, including overdrives and distortions, mod effects, delays, and reverbs, plus dedicated bass effects and BOSS classics like Slow Gear, Octave, Slicer, and more.
The GX-10 enables fast sound creation with an inviting color touch display and four dynamic parameter knobs. Up to two amps and 15 effects are supported in each memory, and it’s easy to change effect order and create series or parallel routings by dragging blocks with a finger on the screen. Send/return jacks are available to integrate favorite pedals or an amp’s effects loop into the GX-10 signal flow.
The GX-10's clever control options provide versatile real-time sound adjustment possibilities while performing. Multiple control modes and user-assignable settings offer maximum flexibility with just three footswitches. By default, the expression pedal toggles between volume and wah and activates the tuner when the pedal is pulled back. But it can be customized to control nearly anything using the GX-10’s assign matrix.
Boss Tone Studio allows users to edit sounds and load their own speaker cab IRs from a Mac or Windows computer. The GX-10 also supports the optional Bluetooth® Audio MIDI Dual Adaptor, which unlocks on-the-gig wireless editing via the mobile version of the app.
Boss Tone Studio includes additional tools to organize GX-10 sounds for different gigs and playing situations. It also provides direct access to Boss Tone Exchange, an online platform for downloading professionally created sounds and sharing GX-10 Livesets with the global BOSS community. GX-100 Livesets are fully compatible with the GX-10 as well. In addition, there’s a built-in USB-C audio interface for capturing high-quality guitar tones in music production apps on computers and mobile devices.
The new Boss GX-10 Guitar Effects Processor will be available for purchase at authorized U.S. Boss retailers in October for $399.99.
For more information, please visit boss.info.