
This sharp fiesta red Strat and Pro Reverb sang beautiful Knopfler-esque melodies, but all that glitters isn’t gold.
A search for a fiesta red Stratocaster and a Knopfler tone didn’t turn out the way our columnist hoped it would.
The latest chapter of my quest for perfect sounds is a love story filled with surprises and valuable insights worth sharing about a fiesta red Stratocaster with a maple neck. Along the way, I’ll explain how I used it to dial in a timeless Mark Knopfler tone from old-school Fender amps.
My personal journey with this elusive guitar tone began at the age of 10, in 1985, when my mother, who was a music teacher, introduced me to Dire Straits’ Brothers in Arms album. Mark Knopfler’s melodic guitar and his signature Stratocaster and Les Paul sounds left a mark on my musical soul. However, I must confess that I'd never been particularly enamored with the looks of his fiesta red Strat. I have gravitated towards Fenders with rosewood necks and lighter body colors like vintage white, surf green, and shell pink.
It was in September of last year that everything changed. I found myself holding a pristine fiesta red Stratocaster in my hands, and a revelation occurred. The color, in real life, is far more nuanced than the intense and dark shades often depicted in magazine spreads or on screens. In the physical world, it’s a beautiful blend of pale red, carrot orange, and delicate pink undertones. It appears that cameras and screens simply cannot capture the true essence of this classic finish.
While browsing for guitars here in Norway, I stumbled upon a 1958 Fender Custom Shop Strat, crafted in 1997, which had been on sale for an extended period, causing its price to gradually decline. It seemed that the absence of the receipt, the certificate of authenticity (COA), and the “case candy,” coupled with the fiesta red finish’s apparent limited popularity, had contributed to the lowered price. I made the seller an offer of $2,090, which he graciously accepted. Today, it is hard to find any Custom Shop Stratocaster below $3,000 to $4,000. My purchase felt like a good deal.
The photos in the advertisement showcased the usual Fender Custom Shop badges and stamps on the headstock, neck plate, neck, and inside the body’s neck pocket. The neck bore a date stamp of February 18, 1997, and there were no telltale signs of other paint colors in the body’s neck pocket or the pickup cavity. With a minor setup, the guitar demonstrated impeccable playability and sustain reminiscent of a grand piano. I proudly and loudly played my newfound fiesta red for a week, eagerly looking forward to the next gig. The only tweak I considered was replacing the small vintage frets with 6105 stainless steel, enabling easier bending and shaking.
“Play from the heart, without overplaying, and you'll find yourself transported to the realm of ‘Sultans of Swing.’”
With my new Strat in hand, I once again set off in pursuit of the classic Knopfler sound. I gravitated towards amplifiers featuring light and low-powered 10" speakers known for their remarkable touch sensitivity. Think of the black-panel or early silver-panel Super Reverb or Vibrolux Reverb models with CTS alnico speakers, famously known for their pristine clean tones. Crank these amps’ volumes up to around 5 or 6, engage the bright switch, ditch your pick, and delicately pluck a set of light or medium strings using the combined bridge and middle pickup position. Play from the heart, without overplaying, and you'll find yourself transported to the realm of “Sultans of Swing.”
Things took an unexpected turn when I reached out to Fender to request a new COA. They responded quickly and asked for more close-up pictures of the wiring harness, pickups, and components. To my great surprise, they informed me that the serial number did not align with a fiesta red with a maple neck; instead, it corresponded to a ’60s flame maple top aged cherry sunburst, crafted in 1998. Even more disheartening was that the wiring, switches, and pots did not appear to be vintage-correct.
While I had heard rumors of discrepancies in Fender’s historical records, it was challenging to accept that my guitar could be a “partscaster” with mismatched components. Nonetheless, the absence of a COA significantly impacted the guitar’s secondhand value. What was I to do? As much as I enjoyed the instrument, the nagging feeling that something was wrong kept me awake at night. Ultimately, I contacted the seller and requested a refund. To my relief, he understood the situation and accepted the return. As a token of gratitude, I gifted him a bottle of Châteauneuf-du-Pape.
A lingering doubt remained: What if Fender’s records were incorrect? I may never have a definitive answer. And so, my quest for the perfect Knopfler fiesta red continues.
- Fender American Professional II Stratocaster Review ›
- Fender American Professional Stratocaster Review ›
- Fender Jimi Hendrix Stratocaster Review ›
- Trash or Treasure: Fender Tex-Mex Stratocaster ›
We’re giving away more gear! Enter Stompboxtober Day 24 for your chance to win today’s pedal from Maxon!
Maxon OD-9 Overdrive Pedal
The Maxon OD-9 Overdrive Effects Pedal may look like your old favorite but that's where the similarity ends. Improved circuitry with a new chip yields the ultra-smooth dynamic overdrive guitarists crave. Drive and Level controls tweak the intensity and volume while the Hi-Boost/Hi-Cut tone controls adjust brightness. Features true bypass switching, a die-cast zinc case, and 3-year warranty. From subtle cries to shattering screams, the Maxon OD-9 delivers a huge range of tones.
Features
Improved circuitry with a new chip yields ultra-smooth dynamic overdrive
Drive and Level controls tweak the intensity and volume
Hi Boost/Hi Cut tone controls adjust brightness
True bypass switching
Die-cast zinc case
AC/DC operation (order optional Maxon AC210N adapter)
Product Specs
Input: 1/4" mono jack
Output: 1/4" mono jack
Power: 9V DC, 6 mA, center pin minus (not included)
Dimensions: (WxDxH) 74 mm x 124 mm x 54 mm
Weight: 580g
Fender’s Greasebucket system is part of Cory Wong’s sonic strategy.
Here’s part two of our look under the hood of the funky rhythm guitar master’s signature 6-string.
Hello and welcome back to Mod Garage. In this edition, we’re continuing our journey through the Fender Cory Wong Stratocaster wiring, bringing it all together.In the previous installment, the last feature on the funky 6-stringer’s signature axe that we discussed was the master volume pot and the corresponding treble-bleed circuit. Now, let’s continue with this guitar’s very special configuration of the tone pots.
Tone pot with Fender Greasebucket tone system:
This 250k tone pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-built Fender guitars. The Cory Wong guitar uses the Fender Greasebucket system, which is added to the pot as a ready-to-solder PCB. The Greasebucket PCB is also available individually from Fender (part #7713546000), though you can use conventional electronic parts for this.
Fender introduced this feature in 2005 on some of the Highway One models and some assorted Custom Shop Strats. The Greasebucket name (which is a registered Fender trademark, by the way) is my favorite of Fender’s marketing names, but don’t let it fool you: Your tone will get cleaner with this modification, not greasy and dirty.
According to Fender, the Greasebucket tone circuit reduces high frequencies without adding bass as the tone knob is turned down. Don’t let that description confuse you. A standard Strat tone control does not add any bass frequencies! As you already know, with a passive system you can’t add anything that isn’t already there. You can reshape the tone by deemphasizing certain frequencies and making others more prominent. Removing highs makes lows more apparent and vice versa. In addition, the use of inductors (which is how a passive pickup behaves in a guitar circuit) and capacitors can create resonant peaks and valleys (band-passes and notches), further coloring the overall tone.
Cory Wong bringing the funk onstage.
This type of band-pass filter only allows certain frequencies to pass through, while others are blocked. The standard tone circuit in a Strat is called a variable low-pass filter (or a treble-cut filter), which only allows the low frequencies to pass through while the high frequencies get sent to ground via the tone cap.
The Greasebucket’s band-pass filter is a combination of a high-pass and a low-pass filter. This is supposed to cut high frequencies without “adding” bass, which has mostly to do with the resistor in series with the pot. That resistor means the control will never get to zero. You can get a similar effect by simply not turning the Strat’s standard tone control all the way down. (The additional cap on the wiper of the Greasebucket circuit complicates things a bit, though; together with the pickups it forms an RLC circuit, but I really don’t want to get into that here.)
The standard Fender Greasebucket tone system is used in the Cory Wong Strat, which includes a 0.1 μF cap and a 0.022 uF cap, along with a 4.7k-ohm resistor in series. These are the values used on the PCB, and without the PCB it looks like the illustration at the top of this column.
Push-push tone pot with preset overwriting function:
The lower tone pot assigned to the bridge pickup is a 250k audio push-push pot with a DPDT switch. The switch is used to engage a preset sound by overwriting the 5-way pickup-selector switch, no matter what switching position it is in. The preset functionality has a very long tradition in the house of Fender, dating back to the early ’50s, when Leo Fender designed a preset bass sound on position 3 (where the typical neck position is on a modern guitar) of the Broadcaster (and later the Telecaster) circuit. Wong loves the middle-and-neck-in-parallel pickup combination, so that’s the preset sound his push-push tone pot is wired for.
The neck pickup has a dedicated tone control while the middle pickup doesn’t, which is also another interesting feature. This means that when you hit the push-push switch, you will engage the neck and middle pickup together in parallel, no matter what you have dialed in on the 5-way switch. Hit the push-push switch again, and the 5-way switch is back to its normal functionality. Instead of a push-push pot, you can naturally use a push-pull pot or a DPDT toggle switch in combination with a normal 250k audio pot.
Here we go for the wiring. For a much clearer visualization, I used the international symbol for ground wherever possible instead of drawing another black wire, because we already have a ton of crossing wires in this drawing. I also simplified the treble-bleed circuit to keep things clearer; you’ll find the architecture of it with the correct values in the previous column.
Cory Wong Strat wiring
Courtesy of singlecoil.com
Wow, this really is a personalized signature guitar down to the bone, and Wong used his opportunity to create a unique instrument. Often, signature instruments deliver custom colors or very small aesthetic or functional details, so the Cory Wong Stratocaster really stands out.
That’s it! In our next column, we will continue our Stratocaster journey in the 70th year of this guitar by having a look at the famous Rory Gallagher Stratocaster, so stay tuned!
Until then ... keep on modding!
The Keeley ZOMA combines two of iconic amp effects—tremolo and reverb—into one pedal.
Key Features of the ZOMA
● Intuitive Control Layout: Three large knobs give you full control over Reverb Level, Tremolo Rate,and Depth
● Easy Access to Alternate Controls: Adjust Reverb Decay, Reverb Tone, and Tremolo Volume withsimple alt-controls.
● Instant Effect Order Switching: Customize your signal path. Position tremolos after reverb for avintage, black-panel tone or place harmonic tremolo before reverb for a dirty, swampy sound.
● True Bypass or Buffered Trails: Choose the setting that best suits your rig.
Three Reverb and Tremolo Modes:
● SS – Spring Reverb & Sine Tremolo: Classic spring reverb paired with a sine wave tremolo for that timelessblack-panel amp tone.
● PH – Plate Reverb & Harmonic Tremolo: Smooth, bright plate reverb combined with swampy harmonictremolo.
● PV – Plate Reverb & Pitch Vibrato: Achieve a vocal-like vibrato with ethereal plate reverb.
Reverb: Sounds & Controls
● Spring Reverb: Authentic tube amp spring reverb that captures every detail of vintage sound.
● Plate Reverb: Bright and smooth, recreating the lush tones of vibrating metal plates.
● Reverb Decay: Adjust the decay time using the REVERB/ALT SWITCH while turning the Level knob.
● Reverb Tone: Modify the tone of your reverb using the REVERB/ALT SWITCH while turning the Rate knob.
Tremolo: Sounds & Controls
● Sine Wave/Volume Tremolo: Adjusts the volume of the signal up and down with smooth sine wavemodulation.
● Harmonic Tremolo: Replicates classic tube-amp harmonic tremolo, creating a phaser-like effect withphase-split filtering.
● Pitch Vibrato: Delivers pitch bending effects that let you control how far and how fast notes shift.
● Alt-Control Tremolo Boost Volume: Adjust the boost volume by holding the REVERB/ALT footswitch whileturning the Depth knob.
The ZOMA is built with artfully designed circuitry and housed in a proprietary angled aluminum enclosure, ensuring both simplicity and durability. Like all Keeley pedals, it’s proudly designed and manufactured in the USA.
ZOMA Stereo Reverb and Tremolo
The first sound effects built into amplifiers were tremolo and reverb. Keeley’s legendary reverbs are paired with their sultry, vocal-like tremolos to give you an unreal sonic experience.
Your 100 Guitarists hosts are too young to have experienced SRV live. We’ve spent decades with the records, live bootlegs, and videos, but we’ll never know quite how it felt to be in the room with SRV’s guitar sound.
Stevie Ray Vaughan was a force of nature. With his “Number One” Strat, he drove a veritable trove of amps—including vintage Fenders, a rotating Vibratone cab, and a Dumble—to create one of the most compelling tones of all, capable of buttery warmth, percussive pick articulation, and cathartic, screaming excess. As he drew upon an endless well of deeply informed blues guitar vocabulary, his creativity on the instrument seemingly knew no bounds.
Your 100 Guitarists hosts are too young to have experienced SRV live. We’ve spent decades with the records, live bootlegs, and videos, but we’ll never know quite how it felt to be in the room with SRV’s guitar sound. So, we’d like to spend some time imagining: How did it feel when it hit you? How did he command his band, Double Trouble? The audience?
SRV was mythical. His heavy-gauge strings tore up his fingers and made a generation of blues guitarists work a lot harder. And his wall of amps seems finely curated to push as much air in all directions as possible. How far did he take it? Was he fine-tuning his amps to extreme degrees? Or could he get his sound out of anything he plugged into?