Soundgarden’s legendary guitar slinger is honored with a versatile signature model that’s fit for paisley sounds as well as molten metal.
Happily spans Black Sabbath and Beatles tones. Cool phase switch. Fast playability.
Pickups could use just a bit more air and dimension.
$899
Guild Polara Kim Thayil
guildguitars.com
Though I’ve never owned one, I’ve always thought the Guild S-100 Polara was super cool. Its riff on the Gibson SG profile—a little offset at the waist with asymmetric horns—always seemed a bit cheeky and appealed to my ’60s Fender sensibilities. Plus, it had that slick, slanted Guild tailpiece (and sometimes an even cooler Guild/Hagstrom vibrato) and those beautiful Guild HB-1 pickups. These elements appealed greatly to a contrarian kid like me.
Used S-100s were a great deal for a long time and attracted other guitarists with less cash and unconventional leanings—among them Pavement’s Steve Malkmus and revered homebrew psychedelicist Bobb Trimble. But none are more famously associated with the S-100 than Soundgarden’s Kim Thayil. Soundgarden’s rise in the 1990s probably had more than a little to do with the model’s reintroduction in the same decade. And were it not for Guild changing hands a few times in recent years, a signature version honoring Thayil probably would have come much sooner. At last, though, the Polara Kim Thayil is here—in a very limited run of 30 (very expensive) USA-built instruments, and the more readily available $899 Indonesia-built version reviewed here. It’s a solid, versatile guitar that readily speaks in voices other than de-tuned heaviness.
Fast Motor Finger
I’ve heard a few folks, including my colleague Zach Wish (who filmed our First Look video for this model) describe this Polara’s mahogany neck as “chunky.” Admittedly, that term leaves room for interpretation, but I think of chunky in terms of early 1950s Telecasters and Les Pauls. And though it can feel a bit wide at the shoulder—the source of chunky perceptions, perhaps—the Thayil Polara’s neck (which Guild calls a “vintage soft U”) is actually quite slim. In fact, it bears an uncanny resemblance to Gibson’s Slim Taper neck, which is actually a little thicker and less squared at the shoulder around frets 1 through 3. The Guild neck shares the same satisfying sense of grip as the slim taper shape up around the 12th fret, though, and on the whole it feels fast and made for ripping. Like the SG, the Polara’s neck also practically begs the player to indulge in Townshend-ian, neck-bending vibrato moves, though there is inevitably a little penalty to pay in terms of tuning stability if you get too enthused. The fretboard radius is a slightly-flatter-than-Gibson 12.5”, and big bends feel effortless right up to the 22nd fret, which, by the way, feels very accessible in spite of what looks like a very sturdy and substantial heel joint. The rosewood fretboard is a lovely piece of lumber, with subtle, pretty, undulating grain that is a nice organic contrast to the pearloid block inlay and the ivory-colored ABS binding.
”The 3-position bias switch can completely recast the sound, feel, and response of a given modulation setting as well as change the interactive dynamics of the controls.“
I’m not a big fan of gold hardware (at least until the plating wears down and takes on a warm glow). But here, against the gloss black polyurethane finish sprayed over the solid mahogany body, it actually looks quite subtle. The Grover Rotomatic 14:1 ratio tuners are, as always, an attractive, substantial-feeling addition to the hardware and feel smooth and accurate. There aren’t too many tuning machines I like more. Signature model signifiers, incidentally, are also subdued and classy—just a few bits of Soundgarden symbology on the truss rod cover and the pickup controls backplate.
More Than Mass
Kim Thayil is rightly associated with de-tuned Sabbath/Melvins chord thuggery. And his namesake Polara dishes such tones pretty effortlessly. Hook it up to a Sovtek Big Muff and drop-D riffs take on an almost comic sense of swagger. But thick chord tones are not the whole ball of wax. The alnico 2 bridge pickup (rated at 7.10k ohms of resistance) exhibits excellent string-to-string volume balance that lends it punch, but also makes it a great vehicle for jangly sounds. At times you can hear hints of a Rickenbacker Hi-Gain’s tight, ringing voice and it can be brilliantly bright. The alnico 2 neck pickup (rated at 7k ohms) is smooth and thick but retains a bit of the bridge pickup’s jangly personality. The combined voice is often the most satisfying of the three. Together, the pickups sound bright with just enough bass ballast to let a very balanced, widescreen overtone picture shine through. And like the bridge pickup setting, the two combined humbuckers sometimes surprise with how readily they pull in the direction of the Beatles rather than Black Sabbath. Cooler still, you can use the small toggle just forward of the treble volume control to put the two pickups out of phase. Depending on your pick attack and musical context, you can coax tones ranging from filtered, Jerry Garcia-with-wah snap-and-quack to Telecaster sting. The out-of-phase setting rules with fuzz, too—transforming that same Sovtek Big Muff into its super-focused and punkier mid-’60s alter ego. There is one quirk to the out-of-phase setting: Volume attenuation on either pickup can quickly turn those snarling sounds to less massive versions of the in-phase settings. Still, the ability to so totally transform the instrument’s voice with the flick of a little toggle is an endlessly fun source of flexibility.
Though the pickups yield many lovely sounds, there is a little midrange emphasis and haze around the edges that can make them sound a touch boxy, less airy, and a little less explosive compared to pickups like the alnico 5 ’60s Burstbuckers in the Gibson SG I kept at hand for comparison. But for pickups in an $899 instrument, they are lively and have ample personality.
The Verdict
When you listen to the first few Soundgarden records, you hear a lot of punchy, midrange-y tones that remind you that Kim Thayil (who, among other things, had an interest in jangly Paisley Underground bands) is about more than thick, mega-massive, woofer-busting hugeness. Fittingly, his signature Polara similarly reminds you that there is more to the mahogany-solidbody-and-humbuckers formula than rock writ large. The Thayil Polara is just as happy playing the part of George Harrison’s or Peter Buck’s guitar as it is slinging slabs of leaden grunge. It’s a great value for that multifacetedness.
Guild Polara Kim Thayil Signature Demo | First Look
- Hooked: Tamino on Soundgarden's "Limo Wreck" ›
- Interview: Soundgarden's Kim Thayil ›
- Rig Rundown - Soundgarden's Kim Thayil, Chris Cornell, and Ben Shepherd ›
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibson’s EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (It’s easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didn’t look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as you’re able to find today. “Why?” you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ’56), the Longhorn 4623 (’58), and the Shorthorn 3612 (’58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses “baritone guitars,” to add to our confusion today. But these vintage “baritones” were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the “tic-tac” bass sound of Nashville records produced by Chet Atkins, or the “click-bass” tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
“When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye.”
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button “Tone Selector Switch” that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
It’s sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
It’s sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? That’s because the model’s single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul ’Bursts. So as people repaired broken ’Bursts, converted other LPs to ’Bursts, or otherwise sought to give other Gibsons a “Golden Era” sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isn’t original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesn’t have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald City’s $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Bacon’s “Danelectro’s UB-2 and the Early Days of 6-String Basses” Reverb News article, Gruhn’s Guide to Vintage Guitars, Tom Wheeler’s American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
Some of us love drum machines and synths, and others don’t, but we all love Billy.
Billy Gibbons is an undisputable guitar force whose feel, tone, and all-around vibe make him the highest level of hero. But that’s not to say he hasn’t made some odd choices in his career, like when ZZ Top re-recorded parts of their classic albums for CD release. And fans will argue which era of the band’s career is best. Some of us love drum machines and synths and others don’t, but we all love Billy.
This episode is sponsored by Magnatone
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.