Audix microphones are a crucial part of the historic rock band’s sonic formula. Tappero and front-of-house engineer Colin Loynachan explain why … and how.
Great songs and chops are crucial to any band’s musical success, but they don’t mean much if the band doesn’t sound equally great live and on album. Part of that is gear—guitars, amps, stompboxes, and everything else in your signal chain—of course. But audiences and fans don’t really hear gear. They hear the sound captured on recordings and in the front of house at shows by microphones—an absolutely critical but sometimes overlooked component of making a great band sound as great as they truly are.
Soul Asylum’s bassist Jeremy Tappero knows this, as both a stellar player and an experienced engineer. He shares the stage with the Minneapolis-based band’s founder Dave Pirner, guitarist Ryan Smith, and drummer Michael Bland, of Prince fame. And they—along with Soul Asylum’s front-of-house engineer Colin Loynachan—share an enthusiasm for Audix microphones. Especially for vocals and drums, which are the two main focuses that mixes are typically built around.
Tappero and Loynachan took a deep dive into how they use Audix mics in the studio and onstage, but not until Tappero—Soul Asylum’s newest member—shared some deep background on his musical journey.
Jeremy, how did you join Soul Asylum?
Jeremy Tappero: I did the indie rock touring van thing for a long time. I was in a band called Gratitude that got signed with Atlantic Records. After a few years, that band got let go, and I found myself back home but itchy to get back on the road. Soul Asylum is obviously a staple here in Minneapolis.
I grew up in Madison, Wisconsin, and one of the big reasons I ended up in Minneapolis was the larger music scene there. As Soul Asylum were going back on the road, they were looking for a guitar tech. I jumped into that role. Later, they found themselves on the hunt for a bass player and I watched them audition a lot of people who would go on short runs or not really cut it.
I started thinking, “I can do better.” It was a hurdle because when you come into a group as a crew member, that’s how you’re perceived. Long story short, after they went through several bassists, I insisted on auditioning and wound up with the gig! I’m almost five years with the band now. Not only are they one of the better bands out of Minneapolis, but I think [lead singer] Dave Pirner is one of the better songwriters of his generation.
Would you describe your early musical background?
Jeremy Tappero: I started playing as soon as I was old enough to hold a guitar, I’d say as early as 5 years old. I remember my dad putting one in my hands and trying to get my fingers to stick in an E major chord. When I finally got it, I probably strummed E major for three hours.
My dad is also a bass player and played in bands as I was growing up. They rehearsed in our basement and when they were gone, I would go downstairs and play all their instruments. I really wanted to be a drummer, so I’d play their drums as much as possible.
It just so happened that the drummer for the band my dad played in was Butch Vig. I idolized him growing up, and used to tell people I wanted to be Butch Vig long before he was, you know, Butch Vig.
What was your point of entry into the music business as a professional?
Jeremy Tappero: I’m not sure that’s even happened yet! [laughs] My first paying job was in high school. There was a teen center in Madison, Wisconsin, called the New Loft. They’d have after-school activities during the week, and then bands playing on the weekends. At some point, they got a real booking agent and national touring bands would come through as well as local high school bands. I started being the sound guy there, I think in 10th or 11th grade. I got to meet a lot of the bands. I met Josh Freese when he was with the Vandals. I got to see a lot of punk, ska, young acts. You learn a lot when you get three or four bands up and down in a night.
You said you moved to Minneapolis for the music scene. How would you describe it?
Jeremy Tappero: There’s a ton of bands. There are giant rehearsal spaces with long waiting lists to get a spot. Rock bands, pop, funk—everybody is playing. The hip-hop community is going great. I don’t know if it’s our long winters, but maybe the idea of being indoors and making a record is part of it. Obviously, people think of the big three of R&B in Minneapolis: Prince, Morris Day, and Jam & Lewis. For rock, it’s the Replacements, Soul Asylum, Hüsker Dü, and so on. Everything cross-pollinates here. No matter their style, everyone was aware of what Prince was up to, and Prince was surprisingly aware of the local scene. There are all kinds of places to play, from fancy venues to kids doing $5 basement shows.
So, you’ve mentioned you’re an Audix devotee. Which Audix mics are you using and on what applications?
Jeremy Tappero: The D6 has been part of our package for quite a while now. We’ve been through a few vocal mics, but a few months ago, Colin, our sound guy, said, “I’m really fighting bleed when it comes to background vocals.” He was the one who drove us trying OM7s onstage. Colin had used them in various applications over the years, and Chris DeNogean [Audix artist relations manager] was nice enough to send us some. Colin was happy in the front-of-house, and our instruments had never been clearer in our in-ear monitor mix. The OM7s really rejected background sound well, and cymbals, guitars, and vocals were all very individuated and clear.
Colin Loynachan: As Jeremy said, the thing I love about the OM7 on vocals is its lack of bleed. Out of all the different mics I’ve used and different acts I’ve worked with, the OM7 is unparalleled in that regard. I can just leave them hot all the time. There’s also no mistaking the D6 on kick drum. We use it outside the drumhead, and it has such a clean attack on transients.
Jeremy Tappero: Everyone in the band except Dave is on in-ear monitors. Changing to the OM7 was a night-and-day difference in terms of the clarity of vocals in our in-ear mixes. The crispness of the high end and the rejection as well … I could crank up a vocal in my in-ears without bringing up the roar of the stage behind the mics and without competing with things like cymbals.
How did you first become aware of Audix microphones?
Colin Loynachan: You know Peter Greenland? He was Willie Nelson’s front-of-house guy for a long time, and he’s sort of a legend in Minneapolis. He’s worked with the Commodores and Phil Collins, too. He was an early adopter of Audix in the late 1980s. Whatever their first live vocal mic was, he bought a bunch. Later, he brought several OM5s to a couple of gigs we were doing. After that, I knew we had to get Audix for Soul Asylum.
What else strikes you about their sound for particular uses?
Colin Loynachan: Working live, we go as fast as we can. Especially with Soul Asylum, we do maybe two songs max at sound check. We don’t want to be up there three or four hours troubleshooting some little resonance in the floor tom, for example. More like 20 or 30 minutes. We’re focused on the big picture. Out of the box, I’m 90 percent of the way to the sound I want if I choose the right Audix mic for the source and place it properly. I don’t have to spend a bunch of time creating that sound after the fact.
Jeremy Tappero: A lot of their mics have a signature frequency shape, which is nice. When we got the OM7s, we just plugged those into the same signal chain as always. There was no EQ change, and the first time I heard them, everything was instantly clearer.
Soul Asylum “Somebody To Shove” Live @ Manchester Ritz 11/11/22
Jeremy, how do you balance touring with owning a recording studio and producing bands?
Jeremy Tappero: I think one helps the other. When I’m working a lot in the studio, I look forward to getting out on tour, and when I’m on the road I look forward to getting home. It also focuses me in terms of scheduling. If I have to tell bands I’ll be gone for a month here or two months there, it narrows down the possibilities and everyone seems to get more serious. So, each keeps the other fresh.
We know you have a blast onstage. What’s your favorite thing about producing and recording other bands?
Jeremy Tappero: I really enjoy working with a band for whom it’s their first time in the studio. I remember how magical that felt when I was young. Now, to be able to be the person who’s mentoring a young musician through their first recording.... It’s really rewarding to see their music come together in a way they maybe didn’t imagine.
Can either of you speak to Audix’s durability? How do the mics handle the rigors of the road?
Jeremy Tappero: I’ve had an i5 as long as I can remember. I think you could literally punch a hole in drywall with it and it would work fine. Put it this way. I’ve never seen an Audix in anyone’s dead mics box. And both Colin and I have extensive boxes! [laughs]
What future projects or applications for Audix mics are on your radar?
Jeremy Tappero: We’d like to try the SCX25A—the “lollipop” mics—as drum overheads. In the studio, I could see them going anywhere, like on a grand piano. We also have some “unplugged” style shows coming up later this year, with a string quartet and some other acoustic players, so maybe we’ll even use them in that context. I’m sure Colin’s wheels are already turning as to which mic to put on which instrument!
Colin Loynachan: I’m also pumped about the SCX25A. We first tried them on a show when an audio production company brought them in. We put them on overheads, and they were very smooth, almost like ribbon mics but not as dark. For the unplugged shows, they’d probably be my first choice on acoustic sources.
Let’s wrap up a little differently. Tell us about a nightmare gig and how you survived it.
Jeremy Tappero: Soul Asylum did a big festival in Mexico City. Anything that could go wrong, did. It started off with our tour manager’s passport going missing. We made it to Mexico City, and the next morning, the van that was supposed to take us to the venue became unavailable at the last minute. [The next van] was three hours late and the driver had no idea where he was going. We were literally driving off the road through fields at one point. The band Filter was playing their final song when we arrived. We had literally minutes to set up. Somehow, we pulled through, started and ended on time, and had a great show. But getting there was more Spinal Tap than Spinal Tap!
This convenient, easy-to-use controller can open up an entire world of sonic shape-shifting. Here are some tips to either inspire you to try one or expand how you’re currently using this flexible, creative device.
If you’re not yet using expression pedals, you should consider them. They have the power to expand and control your sonic universe. For the uninitiated, expression pedals are controllers that typically look like volume or wah pedals. Of course, traditional volume and wah pedals are expression pedals, too, but they are dedicated to controlling only those two effects.
Modern expression pedals allow you to assign and control parameters of your stomps or modelers by moving the expression pedal as you would a volume or wah. Dunlop, Boss, Ernie Ball, Yamaha, Behringer, Mission Engineering, and other manufacturers make these handy devices.
Many, but not all, of today’s stompboxes and modelers have expression pedal inputs that allow for manipulation of one or more parameters of those devices. In the past, this required bending over and turning a knob, or trying to turn a small knob with your foot—both of which can hamper your playing. The freedom of an expression pedal is the control you have over more aspects of your sound, especially in a live setting.
Although some of the uses for expression pedals below can also be accomplished by creating multiple presets, that will not allow real-time control over the parameters like an expression pedal will. Here are some notes about expression pedal use that might get you thinking about how one could help you.
Delay Repeats: Controlling the timing of a delay with tap tempo is very common, but how about controlling the number of repeats? With an expression pedal, by setting the expression control on your delay to control the number of repeats, you can easily go from a few for your rhythm sound to more for your lead sound, and then back off again.
Reverb and Delay Mix: The mix control on reverb and delay pedals allows you to balance the amount of wet to dry signal that you hear. There is often a delicate line to having just the right amount of wet signal with these two effects. If you have too much, your sound can be washed out and undefined. Too little and it can be dry and lack space. The part you are playing, and the venue you are in, can also change the amount of mix you need for these effects. By using an expression pedal for the mix control on reverb or delay, you can alter the sound on the fly to compensate for the part and the room, including turning down the mix for busy parts and up for parts with fewer notes.“Some uses for expression pedals can also be accomplished by creating multiple presets, but that will not allow real-time control over the parameters like an expression pedal will.”
Modulation Depth: The depth of a modulation effect, like a phaser, can drastically alter your guitar sound. A light amount can create a feeling of subtle movement, while a heavy amount can give a thick, underwater-type sound. An expression pedal can help you create a constant feeling of change throughout a song, allowing you to build up and break down the depth for different sections as you see fit.
Tremolo Speed: While the speed of tremolo can often be controlled by tap tempo, using an expression pedal for the same parameter offers other creative uses of the effect. With an expression pedal, you can easily speed the tremolo up to make subtle increases to the energy of a part or slow it down to decrease the energy. You can also create drastic changes in the speed that sound like a fan accelerating or slowing down. Or you can abruptly turn the tremolo off. This last option can be an exciting way to end a song or part.
EQ Change: Every guitar player uses EQ to sculpt their sound—whether via the tone controls on your instrument or amp (modelers included), or a dedicated equalizer used as part of your rig. Subtle tweaks can help you do things like balance out different guitars, cut through the mix more, or compensate for a boomy stage. Real-time control of EQ with an expression pedal is more common in the modeler world than the amp and pedal world, but it does exist in both. For example, increasing the midrange can give you more clarity and cut for solos. Decreasing it can create a flatter sound that can help you stay in the mix with the rest of the band. An expression pedal allows you to have one setting and alter it for multiple situations or guitars as opposed to having separate presets.
While this is a very short list of options for expression-pedal use, it should give you a good place to start. The most important thing is to always be creative, have fun, and find your own voice. An expression pedal can help you do all three.
Voltage Cable Company's new Voltage Vintage Coil 30-foot guitar cable is now protected with ISO-COAT technology to provide unsurpassed reliability.
The new coiled cables are available in four eye-grabbing retro colors – Surf Green, Electric Blue, Orange and Caramel – as well as three standard colors: Black, White and Red. There is also a CME exclusive “Chicago Cream” color on the way.
Guitarists can choose between three different connector configurations: straight/straight plugs, right angle/straight and right angle/right angle options.
The Voltage Vintage Coil offers superior sound quality and durability thanks to ISO-COAT treatment, a patent-pending hermetic seal applied to solder terminations. This first-of-its-kind airtight seal prevents corrosion and oxidization, a known factor in cable failure and degradation. ISO-COAT protected cables are for guitarists who value genuine lifetime durability and consistent tone throughout their career on stage and in the studio.
Voltage cables are hand made by qualified technical engineers using the finest components available and come with a lifetime warranty.
Voltage Vintage Coil features include:
- Lifetime guarantee, 1000+ gig durability
- ISO-COAT treatment - corrosion & oxidization resistant cable internals
- Strengthened structural integrity of solder terminations
Voltage Vintage Coils carry $89.00 USD pricing each and are available online at voltagecableco.com, as well as in select guitar stores in North America, Australia, Thailand, UK, Belgium and China.
About Voltage Cable: Established in 2021, Voltage Cable Co. is a family owned and operated guitar cable company based in Sydney, Australia. All their cables are designed to be played, and built for a lifetime. The company’s ISO-COAT is a patent pending hermetic seal applied to solder terminations.
Featuring dual-engine processing, dynamic room modeling, and classic mic/speaker pairings, this pedal delivers complete album-ready tones for rock and metal players.
Built on powerful dual‑engine processing and world‑class UAD modeling, ANTI 1992 High Gain Amp gives guitarists the unmistakable sound of an original "block letter" Peavey 5150 amplifier* – the notorious 120‑watt tube amp monster that fueled more than three decades of modern metal music, from Thrash and Death Metal, to Grunge, Black Metal, and more.
"With UAFX Dream, Ruby, Woodrow, and Lion amp emulators, we recreated four of the most famous guitar amps ever made," says UA Sr. Product Manager Tore Mogensen. "Now with ANTI, we're giving rock and metal players an authentic emulation of this punishing high gain amp – with the exact mic/speaker pairings and boost/noise gate effects that were responsible for some of the most groundbreaking modern metal tones ever captured."
Key Features:
- A complete emulation of the early '90s 120‑watt tone monster that defined new genres of modern metal
- Powerful UAFX dual-engine delivers the most authentic emulation of the amp ever placed in a stompbox
- Complete album‑ready sounds with built‑in noise gate, TS‑style overdrive, and TC‑style preamp boost
- Groundbreaking Dynamic Room Modeling derived from UA's award-winning OX Amp Top Box
- Six classic mic/speaker pairings used on decades of iconic metal and hard rock records
- Professional presets designed by the guitarists of Tetrarch, Jeff Loomis, and The Black Dahlia Murder
- UAFX mobile app lets you access hidden amp tweaks and mods, choose overdrive/boost, tweak noise gate, recall and archive your presets, download artist presets, and more
- Timeless UA design and craftsmanship, built to last decades
For more information, please visit uaudio.com.
- YouTube
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true stack, and just four stomps.
MonoNeon, aka Dywane Thomas Jr., came up learning the bass from his father in Memphis, Tennessee, but for some reason, he decided to flip his dad’s 4-string bass around and play it with the string order inverted—E string closest to the ground and the G on top. That’s how MonoNeon still plays today, coming up through a rich, inspiring gauntlet of family and community traditions. “I guess my whole style came from just being around my grandma at an early age,” says Thomas.His path has led him to collaborate with dozens of artists, including Nas, Ne-Yo, Mac Miller, and even Prince, and MonoNeon’s solo output is dizzying—trying to count up his solo releases isn’t an easy feat. Premier Guitar’s Chris Kies caught up with the bassist before his show at Nashville’s Exit/In, where he got the scoop on his signature 5-string, Ampeg rig, and simple stomp layout, as well as some choice stories about influences, his brain-melting playing style, and how Prince changed his rig.
Brought to you by D’Addario.
Orange You Glad to See Me?
This Fender MonoNeon Jazz Bass V was created after a rep messaged Thomas on Instagram to set up the signature model, over which Thomas had complete creative control. Naturally, the bass is finished in neon yellow urethane with a neon orange headstock and pickguard, and the roasted maple neck has a 10"–14" compound radius. It’s loaded with custom-wound Fireball 5-string Bass humbuckers and an active, 18V preamp complete with 3-band EQ controls. Thomas’ own has been spruced up with some custom tape jobs, too. All of MonoNeon's connections are handled by Sorry Cables.
Fade to Black
MonoNeon’s Ampeg SVT stack isn’t a choice of passion. “That’s what they had for me, so I just plugged in,” he says. “That’s what I have on my rider. As long as it has good headroom and the cones don’t break up, I’m cool.”
Box Art
MonoNeon’s bass isn’t the only piece of kit treated to custom color jobs. Almost all of his stomps have been zhuzhed up with his eye-popping palette.
Thomas had used a pitch-shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. “When I started playing with Prince, he put the Whammy on my pedalboard,” Thomas explains. “After he passed, I realized how special that moment was.”
Alongside the Whammy, MonoNeon runs a Fairfield Circuitry Randy’s Revenge (for any time he wants to “feel weird”), a literal Fart Pedal (in case the ring mod isn’t weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
Shop MonoNeon's Rig
Fender MonoNeon Jazz Bass V
Ampeg SVT
DigiTech Whammy
CIOKS SOL