Fishing around for some new ideas to enhance your blues licks? Check out this step-by-step approach that covers everything from guide tones to scales.
Intermediate
Intermediate
• Learn all about guide tones.
• Apply simple theoretical concepts to give your blues playing more harmonic definition.
• Build on the supplied harmonic and rhythmic examples to hot-rod your own solos.
It’s easy to just live inside a single pentatonic or blues scale over an entire 12-bar progression, but how hip is it when you hear players really get inside those chord changes? In this lesson we’ll explore some simple techniques that will allow you to create solos that lead the ear through the progression. The goal? To be able to take a cohesive solo that outlines the changes without another instrument providing the harmonic foundation.
Now, we aren’t immediately jumping into Joe Pass territory here. I want to share some techniques to build your confidence, so let’s start with just two notes to demonstrate how easy it is to outline the sound of a chord.
As promised, Ex. 1 only deals with two notes—the 3 and the 7 of each chord. For all our solos, we’ll use a guitar-friendly 12-bar blues progression in the key of G. The first step it to outline the target notes for each chord. Because these are all dominant 7 chords—which have a formula of 1–3–5–b7—we’ll lower the 7 by a half-step:
- G7 – B and F
- C7 – E and Bb
- D7 – F# and C
Ex. 1
We’ll add the root into the mix for our next solo (Ex. 2). You can see how we’re now building on the previous example by adding more color to the canvas. I should also mention that my 16th-notes have a swing feel. This adds some bounce. I’m also doing some large interval leaping within the chord changes, which creates a cool call-and-response effect.
Ex. 2
You might be able to guess what’s next. Yes—it’s time to add the 5 of each chord to our pool of options. Now we have the full four-note arpeggio available to us:
- G7: G–B–D–F
- C7: C–E–G–Bb
- D7: D–F#–A–C
Ex. 3
In Ex. 4, we expand our note choices to include the 6, or 13. Since we’re dealing with dominant chords, which contain a b7, I prefer to call them 13. But that’s just theory mumbo-jumbo. [Editor’s note: When constructing chords that use tones other than the 1, 3, 5, and 7 of a standard “7th chord,” the color note in question can occur in the same octave as the root, or an octave above the root. The latter are technically termed “extended chords” because they reach beyond the 7 into the next octave. These include 9, 11, and 13 chords that can be major, minor, or dominant, depending on what type of 3 and 7 they contain. Just remember this: Whenever you see a number greater than 7, simply subtract 7 from it and you’ll get the scale degree in the same octave as the root. That’s the color note you’re dealing with. In this case, 13 - 7 = 6. So in the chord spelling below, this note appears as the 6, even though you might actually play it an octave higher than the root as a 13.]
Here’s what we have now:
- G7: G–B–D–E–F
- C7: C–E–G–A–Bb
- D7: D–F#–A–B–C
Ex. 4
Next up, we add the 9 to each chord. [Remember our “subtract 7” formula: 9 - 7 = 2. So in the chord spellings below, the color note in question is shown as a 2, though you’ll often play it an octave higher as a 9. Same scale tone, different octave.] This is a common note to add to not only dominant chords, but major and minor chords, too.
Here’s where we’re at:
- G7: G–A–B–D–E–F
- C7: C–D–E–G–A–Bb
- D7: D–E–F#–A–B–C
Ex. 5
Our final piece of the puzzle is to add the 11, or 4, to the mix. [Once again, our “subtract 7” formula comes into play: 11 - 7 = 4.] We now have progressed from the bare-bones guide tones—3 and b7—all the way through arpeggios and landed on the full Mixolydian mode for each chord.
- G7: G–A–B–C–D–E–F
- C7: C–D–E–F–G–A–Bb
- D7: D–E–F#–G–A–B–C
Ex. 6
In closing, I want to leave you with a thought about the rhythms I used throughout the examples. A good sense of rhythm and a depth of rhythmic ideas are as essential to great soloing as your harmonic chops. Rhythm and harmony are equal partners. Make sure you work on both!
- Beyond Blues: How to Play “Bird” Blues - Premier Guitar ›
- Beyond Blues: “Rhythm” Changes and the Blues - Premier Guitar ›
- Beyond Blues: Playing the "Right" Minor Blues Changes - Premier ... ›
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
Some of us love drum machines and synths, and others don’t, but we all love Billy.
Billy Gibbons is an undisputable guitar force whose feel, tone, and all-around vibe make him the highest level of hero. But that’s not to say he hasn’t made some odd choices in his career, like when ZZ Top re-recorded parts of their classic albums for CD release. And fans will argue which era of the band’s career is best. Some of us love drum machines and synths and others don’t, but we all love Billy.
This episode is sponsored by Magnatone
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmark—including delay time, feedback, and independent rate and depth knobs for the modulation—plus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ’80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.