Matrix Guitar Amplification Releases the GM50 Power Amp Module

A versatile, lightweight, power amp module made for musicians who require a quality, high powered mono-bloc solution.

Great Britain (March 16, 2012) -- Matrix Guitar Amplification are proud to announce the release of the GM50, a versatile, lightweight, power amp module made for musicians who require a quality, high powered mono-bloc solution.

Carrying on from the great success of his 1u stereo rack mount GT800FX power amp, designer and company founder Andy Hunt took his 30 years expertise within the British amplifier industry and examined the existing solutions in the marketplace for guitarists. Realizing most were based on Class D, Andy wanted to design an amp module that surpassed those solutions, to give guitarists the quality that he was able to offer with the GT800FX.

Designed to be installed in a cab and weighing less than 2.5 kg, the GM50 is a Class AB amp that measures 312mm x 160mm x 65mm and outputs 400 Watts rms at 4 Ω, 250 at 8 Ω , or 120 at 16 Ω, which provides enough clean headroom to make it comparable in output to a 50-watt tube amp (at 16 Ω).

Handling a full frequency range whilst delivering an uncolored, flat response output, which is further refined to give a more open sound and "valve like feel" with clarity, enables the GM50 to take advantage of both modelling solutions and more traditional guitar pre-amps.

The front of the amp has a combination Neutrik XLR & ¼" jack input along with the power input, power switch and gain knob. Simple connectivity means that the GM50 will connect to your speakers, using the two wires coming from the rear of the amp, without the need to select impedance and accepts 4 ohms and above, even non standard ratings. The fan keeps things running nice and cool whilst the rugged design can withstand the high pressures found in cabinets without compromising components or leaking unwanted noise through the unit.

Perfect if you’re using a floor mounted or amp-top modeller and don't want to carry a separate amp, the mounting plate enables you to simply put the GM50 into a favorite passive guitar or full range cabinet, turning it into an all in one, ultra-portable, active system.

Guitarists can use the GM50 to power 1x12, 2x12 or even a 4x12 cab for a simple setup or go for more complex ones such as using a favorite valve preamp to power a W/D/W system with the GM50 providing power in each of your cabs.

Priced at $306 (plus taxes and shipping), the GM50s will be ready for shipping from April 2012.

For more information:
Matrix Guitar Amplification

Optimized for a balanced sound with plenty of booty on tap, Nordstrand Audio CatPups offer classically inspired tones for any platform into which you can fit them.

Read MoreShow less

A newly designed koa wonder that packs a punch.

Incredibly easy to play. Well-balanced tone.

Not as visually stunning as other koa models.


Taylor 724ce

Hawaiian koa has been a favorite of boutique acoustic builders for ages. It has a cool tone personality, somewhere between rosewood and mahogany. It can be used for both back and sides and for top wood, and it’s beautiful. It’s also pretty expensive. The good news is that Taylor’s new 724ce is built with a breed of Koa that actually helps players save a few bucks.
Read MoreShow less

An all-analog polyphonic amplitude synthesizer that alters the attack and decay time of any sound source without sacrificing the fidelity of the original tone.

Read MoreShow less