Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

A Frank Lloyd Wright-Esque  Axe for Working-Class Heroes

The 1954 Harmony Stratotone was built as a compact, affordable alternative to the major companies' solidbodies, with a simple control set of volume and tone dials and a bypass slider for a single-coil pickup.

In '54, Harmony introduced the gold-finished H44 Stratotone as a guitar for the masses. Today, it's a favorite among vintage slide fiends.

This morning I was reading about the great American architect and designer Frank Lloyd Wright. His achievements in housing design were truly remarkable and breathtaking, but in the early 1900s he became interested in applying his mastery to building economical housing for working people. There's even a block of his tiny homes in Milwaukee, Wisconsin, along Burnham Street, and they feature some of Wright's most famous design cues, such as flat roofs and central hearths. It got me thinking about guitars and how the idea of economical brands has existed almost since the dawn of the dime store. In the U.S., I always think of Harmony, Kay, and Danelectro as the builders who made good quality guitars in the low-to-middle price range, and this resonated with Wright's ideas of homes for the working class. By the 1950s, we would need guitars for the working class, too!


In 1954, Harmony broke away from its typical big-bodied, hollow, archtop designs and introduced the solidbody H44 Stratotone. The new model was billed as an "easy-to-handle" Spanish electric that was lightweight and thin-bodied. At just three-feet long and 10 5/8" wide (with a scale length of 25 1/4"), the Stratotone bridged the gap between the popular Hawaiian lap-steel guitars and full auditorium-sized archtops. There seems to be a natural evolution between lap-steel guitars and some of the original solidbody electrics of the early 1950s, because guitars like the Stratotone were just so darn tiny! But they were also affordable for blossoming baby boomers at the beginning of rock 'n' roll.

The Stratotone bridged the gap between the popular Hawaiian lap-steel guitars and full auditorium-sized archtops.

The price of a Harmony Stratotone in 1954 was $64.50 and a case was eight bucks extra. At that same time, a Fender Stratocaster was selling for around $250 and a Telecaster for $190. In the Gibson universe, a Les Paul Custom was $360, a standard was $235, a Special was $170, and a Junior was $110. So, if you were a working Joe with a youngster craving a solidbody electric … well, the decision was easy, and soon Harmony was on its way to becoming one of the largest guitar makers in the world. It also didn't hurt sales when famous musicians such as Ritchie Valens strapped up an H44.

By the mid 1950s, there was a dual-pickup Stratotone called the H88 Doublet, and a little later there was even a Stratotone H42 Newport, which featured a metal body trim dubbed Harmometal. These Newports are totally drive-in diner guitars. But alas, all these cool solidbodies were gone from the Harmony catalogs by the late '50s and can be hard to find these days on the used market. Depending on the model, the early Stratotones can easily cost over a grand, which is a far cry from the humble heyday of these working-class guitars. Then again, I don't think working-class people currently occupy those Wright homes on Burnham Street, either. So it goes.

Harmony H44 Stratotone

This 1954 Harmony Stratotone's headstock is a charming reminder of its atomic-age arrival.

The electronics in the Stratotone are a simple affair, with just one pickup paired with volume and tone controls. There is also a slide switch attached to a capacitor that allowed for more bass or treble sounds. The gold finish was reminiscent of some upscale Gibson guitars, and the atomic-age logo on the headstock was straight out of a Jetsons episode. You were going to go nuclear with this little guy! The wide, full neck with open-back tuners is just a pleasure, and the pickup is a total little screamer that reads in the mid 3k range. The simple bridge and tailpiece don't allow for much fine-tuning and since these had set necks, the guitars were a bit limited. But they do make for excellent slide guitars or a good stand-in for a lap steel.

1955 Harmony H44 Stratotone Guitar Demo

Cat in the hat Mike Dugan demos a 1955 Harmony Stratotone, with a little help from a fuzzbox and a quick trip to Duanesville with a slide—highlighting the guitar's connection to earlier lap-slide electrics.


With a team of experts on hand, we look at six workhorse vintage amps you can still find for around $1,000 or less.

If you survey the gear that shows up on stages and studios for long enough, you’ll spot some patterns in the kinds of guitar amplification players are using. There’s the rotating cast of backline badasses that do the bulk of the work cranking it out every day and night—we’re all looking at you, ’65 Deluxe Reverb reissue.

Read MoreShow less

Amazon Prime Day is here (July 16-17). Whether you're a veteran player or just picking up your first guitar, these are some bargains you don't want to miss. Check out more deals here! https://amzn.to/3LskPRV

Read MoreShow less

A technicolor swirl of distortion, drive, boost, and ferocious fuzz.

Summons a wealth of engaging, and often unique, boost, drive, distortion, and fuzz tones that deviate from common templates. Interactive controls.

Finding just-right tones, while rewarding, might demand patience from less assured and experienced drive-pedal users. Tone control could be more nuanced.

$199

Danelectro Nichols 1966
danelectro.com

4.5
4
4
4.5

The Danelectro Nichols 1966, in spite of its simplicity, feels and sounds like a stompbox people will use in about a million different ways. Its creator, Steve Ridinger, who built the first version as an industrious Angeleno teen in 1966, modestly calls the China-made Nichols 1966 a cross between a fuzz and a distortion. And, at many settings, it is most certainly that.

Read MoreShow less

The author standing next to a Richardson gunstock lathe purchased from Gibson’s Kalamazoo factory. It was used to make six necks at a time at Gibson in the 1950s and 1960s.

Keep your head down and put in the work if you want to succeed in the gear-building business.

The accelerated commodification of musical instruments during the late 20th century conjures up visions of massive factories churning out violins, pianos, and, of course, fretted instruments. Even the venerable builders of the so-called “golden age” were not exactly the boutique luthier shops of our imagination.

Read MoreShow less