The punk rock pioneer rips on nothing more than a Schecter S-1, a JCM2000, and a well-placed DL4.
Punk rock is about energy, attitude, and message. It’s been the gateway drug for a lot of guitarists and music lovers. And those forces are what steered East Bay Ray away from his bar-band gig in 1978.
“The little hairs on the back of my neck stood up,” Ray remembered during a 2016 PG interview. “I saw the Weirdos playing. I said, ‘This is what I want to do.’ I phased myself out of the bar band and put an ad up in Aquarius Records and Rather Ripped Records. Klaus Flouride (bassist Geoffrey Lyall) and Jello Biafra (singer Eric Boucher) answered the ad.”
And with the addition of drummer Ted (Bruce Slesinger), the Dead Kennedys were born. By the time they recorded their 1981 EP In God We Trust, Inc. (on their own independent label, Alternative Tentacles), Ted was gone and D.H. Peligro (Darren Henley) became their stalwart skin slammer.
Through the band’s initial eight years, four albums, and an EP, their subversive harpoon of jagged political commentary was tipped by Biafra’s lyrics. That got the nation’s attention, but what inspires musicians to this day was the power trio’s cohesive combination of familiar and unfamiliar elements of punk and primal rock. Sure, you’ve got the power chords and the four-on-the-floor tempos, but depth and nuance under the biting messaging is essential to the DK’s chemistry. Their punk-rock bangers have modal tendencies and atonal flourishes, and some of their most thrilling songs have odd-metered backbones. Their debut single, “California Über Alles,” is a take on composer Maurice Ravel’s Boléro, no less. And nobody else in the land of the 6-string shreds quite like East Bay Ray.
“One of the reasons our songs have lasted so long is the structure underneath has a lot in common with a Beatles song or a Motown song or even a ’30s standard,” he says. “There are basic constructions that make a song work. I really had a hard time copying or figuring out solos off my favorite recordings when learning to play, so I’d develop my own musical method to get from one place to another. It’s actually a lack of technique that helped with the music.”
His creativity and resourcefulness don’t stop there. East Bay Ray was the band’s co-producer/engineer on most recordings, and he’s tinkered with his own tone tools, assembling partscasters that best suited his approach. Ray has jammed humbuckers into the bridge of a T-style for a twangier bite that helps his rapid-fire arpeggios sting a bit more. He’s slapped on short-scale Japanese F-style necks for slinkier playability. And, most notably, he put a Maestro Echoplex in front of his amp to create the signature clanging sound heard on his classic recordings with the band. (“One of my favorite records of all time is Elvis Presley’s Sun Sessions. That is one of the records that inspired me to get an Echoplex, to get that slapback echo.”)
“We just didn’t know the rules on what to play and how to play,” he relates. “That’s where not knowing something forces you to make your own solution, creating something unique and new, proving that necessity is the mother of invention. The lack of technique and knowledge helped create our sound and the music.”
Before the Dead Kennedys’ headlining show at Nashville’s Brooklyn Bowl on June 15th, PG hit the stage for a brief but illuminating tone talk. We covered Ray’s economically rich setup that includes a single Schecter doublecut and a simplified, solid-sounding Marshall, and we were enlightened about why he puts his Line 6 delay ahead of the amp and what that does to repeats.
[Brought to you by D’Addario Nexxus 360 Tuner.]
S-1 Is Good Food
East Bay Ray was known to use a variety of Fenders in the early days of the Dead Kennedys. In a PG article, he detailed that he preferred Leo’s offspring (or copies) because the longer scale length and string-through construction gave his sound more twang and clarity. He often modded out bridge single-coils for hotter humbuckers because that gave him a huskier tone that punched through the mix. He notes in this new Rundown that the Japanese T-styles he used in the ’80s actually had a 24.75" scale length, typical of Gibson-style electrics.
“That’s how my sound started: I liked the twangy sound with the fatter humbucking pickup. Like on ‘Holiday in Cambodia,’ I play a bunch of arpeggios and they really ring out.” (In the same article, he does mention using Gibson models, but felt a “Les Paul is good for one-string type stuff, because it is really fat, but when you start playing two strings, it’s not as articulate as a Fender would be.”)
However, for this headlining run through the U.S., Ray brought a single Schecter S-1. He mentions in the Rundown that he still owns all his old Fenders and Japanese knockoffs but doesn’t want anything to happen to them. To soup up the doublecut, he typically swaps in a Seymour Duncan SH-1 ’59 (neck) and Seymour Duncan SH-4 JB (bridge) for the model’s standard Schecter Diamond Plus humbuckers. (Although the S-1 on this tour still has stock pickups.)
Knob Job
Ray’s guitar for the DK’s first singles, “Holiday in Cambodia” and “California Über Alles,” was recorded through a Fender Super Reverb (with an Electro-Harmonix LPB-1 Linear Power Booster in front of it). Shortly after those recordings, the self-admitted “science geek” tracked down schematics for Marshalls and Boogie amps and hot-rodded his Fender Super Reverb to have an extra tube channel, overhauling it to, essentially, a master-volume Marshall. He graduated to a real-deal JMP for the band’s later records and live shows. Now when on tour, he hauls a Marshall JCM 2000 because it has “a versatile sound with a good midrange, and it doesn’t have too many knobs like the TSLs [laughs]. That thing is annoying to look at.”
A Blast from the Past
Photo by John Cuniberti
Here’s a shot from our Forgotten Heroes piece of East Bay Ray (featured in the August 2016 issue) cutting tracks at San Francisco’s Hyde Street Studios playing a Coral S-style rather than his Tele. Additionally, you see the JMP and mighty ’Plex lurking on the table.
A More Musical Way… Way… Way
In the band’s heyday, Ray traveled everywhere with his beloved Maestro Echoplex. He comments in the Rundown that while it was a key component to his sound, it was a pain to maintain with its tape cartridges and the need for a bottle of tape cleaner. Plus, in Europe power runs at 50 Hz so the unit would run slower. (The U.S. standard power is 60 Hz.) Retiring the solid-state echo machine years ago, he landed on the Line 6 DL4 as his now-long-running replacement. EBR prefers it because it has three presets and he always has it locked in the analog-with-modulation setting. The key to his kerrangingly musical repeats is putting the DL4 (and the ’Plex, before he acquired the Line 6 device) ahead of the amp, making each echo a cleaner decay than the one before it.
Taken from our 2016 interview, we’ll let East Bay Ray decode the method to his madness: “One of the tricks is to put the echo unit before the amp. Recording engineers don’t like that. The echoes clean up as they go through the amp because they’re at less volume. Recording engineers or some guitarists stick it in the loop in the back of the amp. They make the sound, process it, and then they add the echo—but that’s more like a post-EQ effect. I do it pre-EQ. Even when I’m maxed out—like with the compressor on, the amp up, and the guitar all the way up—if there is a piece of silence, if you listen to the echo, it cleans up. The last ones will be the clean guitar. It’s a less technical way to do it, but it’s a more musical way. It’s bad engineering, but more musical. For somebody who’s trained in engineering, ‘Each echo is different!’ But from an artistic side, ‘Yeah. That’s what makes it more interesting—because they’re different.’”
As for the Boss CS-3 Compression Sustainer, he uses it more as a boost than squeezebox. He maxes the level, eases back the tone, dimes the attack, and pushes the sustain, resulting in a mild volume jump for solos and single-note ditties. It’s in the chain after the DL4 and ahead of the amp so it can boost the repeats when the CS-3 is engaged along with the green machine.
- Forgotten Heroes: East Bay Ray - Premier Guitar ›
- Hooked: Propagandhi's Sulynn Hago on the Dead Kennedys ... ›
- The Dead Weather: Anarchy + Chaos + Melody = Rock 'n' Roll ... ›
The majestic Roland Space Echo is having a bit of a resurgence. Here’s a breakdown on what makes it tick, and whether or not it’s right for you.
In this article, we delve into one of the most cherished gadgets in my guitar collection, the Roland Space Echo RE-201. This iconic piece of equipment has been used by legendary musicians like Jonny Greenwood, Brian Setzer, and Wata from Boris, which only heightened my desire to own one. A few years ago, I was fortunate to acquire a vintage RE-201 in good condition and at a reasonable price.
Using the RE-201 today has its advantages and disadvantages, particularly due to its size, which is comparable to an amplifier head. When compared to modern equivalents like delay pedals or software plugins that closely emulate the original, the vintage RE-201 can seem inefficient. Here, I share my personal and subjective experience with it.
The RE-201 is a tape echo/delay effect that gained popularity in the 1970s and ’80s. Unlike the more complex analog BBD delays or digital delays, tape delays use magnetic tape to simultaneously record and play back sound via a magnetic tape head (similar to a guitar or bass pickup). Because the recording head and playback head are in different physical locations, there is a time gap during the recording and playback process, creating the “delay” effect. This concept was first discovered by Les Paul in the 1950s using two tape machines simultaneously.
However, this method has a drawback: The magnetic tape used as a storage medium has a limited lifespan. Over time, the quality of the tape degrades, especially with continuous use. This degradation is marked by muddy, wavy sounds and unavoidable noise. Yet, this is precisely where the magic of real tape echo lies! New tapes produce clearer, hi-fi sounds, while older tapes tend to produce wavy sounds known as “modulated delay.” Additionally, increasing the number of tape-head readers extends the gap time/delay time of the output, and activating multiple tape-head readers simultaneously creates unique echo/delay patterns.
“This degradation is marked by muddy, wavy sounds and unavoidable noise. Yet, this is precisely where the magic of real tape echo/delay lies!”
Just as how fuzz and distortion effects were discovered, the “imperfections” of tape also represent a historical fact about how the creative process in music follows an absurd, non-linear, and unique pattern. In everyday practical life, signal delay is something typically avoided; however, in a musical context, delay adds a deeper dimension. Today, it’s hard to imagine a pedalboard without a delay effect at the end of the chain.
This uniqueness inspired me to create Masjidil Echo, embracing the “imperfection” of a vintage tape echo/delay with magnetic tape that hasn’t been replaced for years. Many newer pedals, such as the Boss RE-20, Strymon El Capistan, and the Catalinbread Echorec and Belle Epoch, draw inspiration from vintage tape repeat machines. Each has its unique interpretation of emulating tape echo, all in a more compact and maintenance-free format. Real tape delay requires periodic maintenance and has mostly been discontinued since the mid 1980s, with Roland ceasing production of the Space Echo entirely in 1985.
However, in recent years, interest in real tape echo has surged, perhaps due to nostalgia for past technology. As a result, many vintage delay units have appeared on marketplaces at increasingly gargantuan prices! If you’re considering acquiring one, I recommend thinking it over carefully. Are you prepared for the maintenance? Will you use it for regular performances? Are you ready for the fact that magnetic tape will become increasingly difficult to find, potentially turning your machine into a mere display piece? I don’t mean to instill fear, but the real deal, in my opinion, still can’t be fully emulated into a more practical and future-proof digital format.
So, I’ll leave you with one final question for consideration: What if the genealogy of technology were reversed chronologically, with multihead/multitap delay discovered digitally in the 1950s, and in the 2000s, a technological disruption led to the invention of mechanical tape echo to replace digital technology? Which would you choose?
In collaboration with Cory Wong, the Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
In collaboration with Cory Wong, this Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: Iconic blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
Renowned international funk guitar maestro and 63rd Grammy nominee Cory Wong is celebrated for his unique playing style and unmistakable crisp tone. Known for his expressive technique, he’s been acclaimed across the globe by all audiences for his unique blend of energy and soul. In 2022, Cory discovered the multi-functional Soul Press II pedal from Hotone and instantly fell in love. Since then, it has become his go-to pedal for live performances.Now, two years later, the Hotone team has meticulously crafted the Wong Press, a pedal tailored specifically for Cory Wong. Building on the multi-functional design philosophy of the Soul Press series, this new pedal includes Cory’s custom requests: a signature blue and white color scheme, a customized volume pedal curve, an adjustable wah Q value range, and travel lights that indicate both pedal position and working mode.
Cory’s near-perfect pursuit of tone and pedal feel presented a significant challenge for our development team. After countless adjustments to the Q value range, Hotone engineers achieved the precise WAH tone Cory desired while minimizing the risk of accidental Q value changes affecting the sound. Additionally, based on Cory’s feedback, the volume control was fine-tuned for a smoother, more musical transition, enhancing the overall feel of volume swells. The team also upgraded the iconic travel lights of the Soul Press II to dual-color travel lights—blue for Wah mode and green for Volume mode—making live performances more intuitive and visually striking.
Features
- True Bypass
- 4 in 1 functionality (volume, expression, wah, volume/wah)
- New dual-color STATUS LED strip indicating pedal mode and position in real time
- Cory’s custom volume curve and wah Q control
- Classic-voiced wah tone with flexible tonal range
- Active volume design for keeping lossless tone
- Separate tuner and expression outputs for more connection possibilities
- 9V DC or 9V battery power supply
Introducing the Hotone Wong Press - Cory Wong's signature Volume/Wah/Expression Pedal - YouTube
Check the product page at hotone.com
Big time processing power in a reverb that you can explore for a lifetime.
An astoundingly lush and versatile reverb of incredible depth and flexibility. New and older BigSky algorithms included. More elegant control layout and better screen.
It’s pricey and getting the full use out of it takes some time and effort.
$679
Strymon BigSky MX
strymon.net
Strymon calls the BigSky MX pedal “one reverb to rule them all.” Yep, that’s a riff on something we’ve heard before, but in this case it might be hard to argue. In updating what was already one of the market’s most comprehensive and versatile reverbs, Strymon has created a reverb pedal that will take some players a lifetime to fully explore. That process is likely to be tons of fun, too.
Grinding out impressive DSP power via an 800 MHz tri-core ARM processor with 32-bit floating-point processing, the BigSky MX introduces seven brand-new reverb algorithms, allows users to load any compatible convolution reverb (or impulse response) as well as to use two reverbs simultaneously—in series, parallel, and split—plus it delivers several other mind-bending features. Given this wealth of goodies, it’s impossible to test and discuss every sound and function, but what we heard is exciting.
Infinite Space
The updated MX will look very familiar to those who know the original BigSky. The form factor is nearly identical, though the MX is a bit larger. Its control interface is similar too, albeit rearranged into a single row of knobs that looks more balanced. Rotary controls include decay, pre-delay, tone, mod, parameter 1, parameter 2, and mix. A value knob enables effect-level manipulation on the larger, clearer OLED screen. It also allows you to select between the older or “classic” algorithms from the original BigSky and the seven new ones. Three footswitches allow for preset selection, bank up or down (two switches pressed together), and an infinite hold/sustain switch that’s always available. The rotary “type” knob in the upper-left corner spins between 12 basic reverb voices. As with most things Strymon, many of these controls are multi-function.
Also very Strymon-like are the top-mounted, 5-pin DIN MIDI I/O connections, which come in handy if you want to maximize the pedal’s potential in a MIDI-controlled rig. But you can access more than enough right from the pedal itself to satisfy the needs of most standard pedalboard-based setups. A USB-C port enables computer connection for MIDI control via that route, use of the Nixie 2 editing app, or firmware updates.
There are stereo jacks for both input and output, plus a multi-function 1/4" TRS/MIDI expression jack for use with a further range of external controllers. The standard center-negative power jack requires a DC supply offering at least 500 mA of current draw.
It is utterly hypnotic and addictive once you settle in and work a little more intuitively.
Sky’s the Limit
The BigSky MX was, initially, a bit mind-boggling on account of the seemingly endless possibilities. But it is utterly hypnotic and addictive once you settle in and work a little more intuitively. Suffice it to say, the core quality of the reverb sounds themselves are excellent, and the sheer variety is astounding. Beyond the standard emulations, I really dug several permutations of the cloud reverb, the chorale mode (which adds tenor and baritone harmonizing tones), and bloom mode (which generates deep synthesizer-style pads), and I could have gotten lost in any of these for hours if there wasn’t so much more to explore. Among the highlights: There is now an option to pan reverbs across the stereo field. The MX also uses audio design concepts borrowed from tape delays to create rhythmic pattern-based reverbs, which is an excellent compositional tool.
The Verdict
This latest evolution of the already impressive and super-capable BigSky is the kind of pedal that could cause you to disappear into your basement studio, never to return. The sounds are addictive and varied and can be configured in endless creative ways. The programmability and connectivity are also superb. Additionally, the new algorithms weren’t added at expense of the old BigSky algos. There’s no doubt that it will be flat-out too much horsepower for the guitarist that needs a few traditional sounds and, perhaps, a few more spacious options. And it would be interesting to know what percentage of the pedal’s customers end up being synth artists, engineers, or sound designers of one kind or another. If you’re the kind of guitar player that enjoys stretching the sound and capabilities of your instrument as far as they will go, the BlueSky MX will gladly ride along to the bounds of your imagination. It may test the bounds of your budget, too. But in many ways, the BigSky MX is as much a piece of outboard studio gear as a stompbox, and if you’re willing to invest the time, the BigSky MX has the goods to pay you back.
“The Player II Series represents our continued evolution in design and functionality,” said Justin Norvell, EVP of Product, FMIC. “We listened to the feedback from musicians around the world and incorporated their insights to refine and innovate our instruments. The re-introduction of rosewood fingerboards is a restoration of the ‘original Fender recipe’ and will no doubt be a fan favorite - but we didn’t want to stop there. We’ve also incorporated our rolled fingerboard edges for a broken-in feel, upgraded hardware, and have some new body options as well- which underscores our commitment to providing players and creators with the tools they need to express their unique sound and style. The Player II Series is not just an upgrade, it's a detailed re-imagining of our core silhouettes, highlighting our dedication to quality and the continuous refinement of our instruments.”
Additionally, Player II offers new options for chambered ash and chambered mahogany bodies for the Player II Stratocaster and Telecaster models, which will be available in October. Designed for musicians ready to elevate their craft, the Player II Series sets a new standard for quality and performance in the mid-price range.